Searched hist:2006 (Results 501 - 525 of 579) sorted by relevance

<<21222324

/gem5/src/cpu/
H A Dthread_context.hh3778:ac52cbef744c Wed Dec 06 06:05:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Merge zizzer:/bk/newmem
into zower.eecs.umich.edu:/eecshome/m5/newmem

src/cpu/o3/commit_impl.hh:
Hand Merge
3776:4f88e76d8ebe Wed Dec 06 06:00:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Flattening and syscallReturn fixes

src/cpu/o3/thread_context_impl.hh:
Use flattened indices
src/cpu/simple_thread.hh:
Use flattened indices, and pass a thread context to setSyscallReturn rather than a register file.
src/cpu/thread_context.hh:
The SyscallReturn class is no longer in arch/syscallreturn.hh
3686:fa8d8b90cd8a Wed Nov 29 16:07:00 EST 2006 Kevin Lim <ktlim@umich.edu> Change the connecting of the physPort and virtPort to the memory object below the CPU to happen every time activateContext is called. The overhead is probably a little higher than necessary, but allows these connections to properly be made when there are CPUs that are inactive until they are switched in.

Right now this introduces a minor memory leak as old physPorts and virtPorts are not deleted when new ones are created. A flyspray task has been created for this issue. It can not be resolved until we determine how the bus will handle giving out ID's to functional ports that may be deleted.

src/cpu/o3/cpu.cc:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Change the setup of the physPort and virtPort to instead happen every time the CPU has a context activated. This is a little high overhead, but keeps it working correctly when the CPU does not have a physical memory attached to it until it switches in (like the case of switch CPUs).
src/cpu/o3/thread_context.hh:
Change function from being called at init() to just being called whenever the memory ports need to be connected.
src/cpu/o3/thread_context_impl.hh:
Update this to not delete the port if it's the same as the virtPort.
src/cpu/thread_context.hh:
Change function from being called at init() to whenever the memory ports need to be connected.
src/cpu/thread_state.cc:
Instead of initializing the ports, simply connect them, deleting any old ports that might exist. This allows these functions to be called multiple times.
src/cpu/thread_state.hh:
Ports are no longer initialized, but rather connected at context activation time.
3673:34386ba8cb41 Fri Nov 17 21:55:00 EST 2006 Ron Dreslinski <rdreslin@umich.edu> Make an initialization pass for the thread context and set the [phys,virt]Port correctly

src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Call the thread context initialization
3548:85e64c82c522 Tue Nov 07 05:36:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Moved the switched version of kernel_stats.hh back to kern, and moved the base kernel_stats to base_kernel_stats
3521:0b0b3551def0 Fri Nov 03 04:25:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Got rid of "inPalMode". Some places are still effectively checking if they are in PAL mode, however.
3468:cf23ad1ceef2 Wed Nov 01 16:44:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Adjustments for the AlphaTLB changing to AlphaISA::TLB and changing register file functions to not take faults
3453:c3ce58882751 Tue Oct 31 02:08:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Put the Alpha tlb stuff into the AlphaISA namespace, and give the classes more neutral names.
2972:f84c6c5309ce Fri Aug 11 19:43:00 EDT 2006 Gabe Black <gblack@eecs.umich.edu> Pushed most of constants.hh back into isa_traits.hh and regfile.hh and created a seperate file for the syscallreturn class.
2875:9b6f6b75b187 Fri Jul 07 04:06:00 EDT 2006 Korey Sewell <ksewell@umich.edu> Fix so that O3CPU doesnt segfault on exit.
Major thing was to not execute commit if there are no active threads in CPU.

src/cpu/o3/alpha/thread_context.hh:
call deallocate instead of deallocateContext
src/cpu/o3/commit_impl.hh:
dont run commit stage if there are no instructions
src/cpu/o3/cpu.cc:
add deallocate event, deactivateThread function, and edit deallocateContext.
src/cpu/o3/cpu.hh:
add deallocate event and add optional delay to deallocateContext
src/cpu/o3/thread_context.hh:
optional delay for deallocate
src/cpu/o3/thread_context_impl.hh:
edit DPRINTFs to say Thread Context instead of Alpha TC
src/cpu/thread_context.hh:
optional delay
src/sim/syscall_emul.hh:
name stuff
H A Dbase.cc3814:33bd4ec9d66a Mon Dec 04 00:54:00 EST 2006 Ali Saidi <saidi@eecs.umich.edu> More changes to get SPARC fs closer. Now at 1.2M cycles before difference

configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
3661:efc80a01aeb6 Tue Nov 14 01:10:00 EST 2006 Ron Dreslinski <rdreslin@umich.edu> Make cpu's capable of having a phase shift
3541:d74340b852f6 Mon Nov 06 19:52:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Merge zizzer.eecs.umich.edu:/bk/newmem/
into zeep.eecs.umich.edu:/home/gblack/m5/newmemmemops

src/SConscript:
SCCS merged
3520:4f4a2054fd85 Fri Nov 03 02:25:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Add a new file which describes an ISA's interrupt handling mechanism. It records when interrupts are requested, and returns an interrupt to execute if the
3495:884bf1f0c0c9 Mon Nov 06 13:27:00 EST 2006 Kevin Lim <ktlim@umich.edu> Clean up clock phase drift code a bit.

src/cpu/base.cc:
Move clock phase drift code to the base CPU so that any CPU model can use it.
src/cpu/base.hh:
Added two functions to help get the next cycle the CPU should be scheduled.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Use the function now in BaseCPU.
3144:b6e9e1811d71 Fri Oct 06 01:27:00 EDT 2006 Lisa Hsu <hsul@eecs.umich.edu> there are two main thrusts of this changeset.

1) return the periodicity of checkpoints back into the code (i.e. make m5 checkpoint n m meaningful again).
2) to do this, i had to much around with being able to repeatedly schedule and SimLoopExitEvent, which led to changes in how exit simloop events are handled to make this easier.

src/arch/alpha/isa/decoder.isa:
src/mem/cache/cache_impl.hh:
modify arg. order for new calling convention of exitSimLoop.
src/cpu/base.cc:
src/sim/main.cc:
src/sim/pseudo_inst.cc:
src/sim/root.cc:
now, instead of creating a new SimLoopExitEvent, call a wrapper schedExitSimLoop which handles all the default args.
src/sim/sim_events.cc:
src/sim/sim_events.hh:
src/sim/sim_exit.hh:
add the periodicity of checkpointing back into the code.

to facilitate this, there are now two wrappers (instead of just overloading exitSimLoop). exitSimLoop is only for exiting NOW (i.e. at curTick), while schedExitSimLoop schedules and exit event for the future.
3126:756092c6383c Mon Oct 02 11:58:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Updates to fix merge issues and bring almost everything up to working speed. Ozone CPU remains untested, but everything else compiles and runs.

src/arch/alpha/isa_traits.hh:
This got changed to the wrong version by accident.
src/cpu/base.cc:
Fix up progress event to not schedule itself if the interval is set to 0.
src/cpu/base.hh:
Fix up the CPU Progress Event to not print itself if it's set to 0. Also remove stats_reset_inst (something I added to m5 but isn't necessary here).
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.hh:
Remove float variable of instResult; it's always held within the double part now.
src/cpu/checker/cpu_impl.hh:
Use thread and not cpuXC.
src/cpu/o3/alpha/cpu_builder.cc:
src/cpu/o3/checker_builder.cc:
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu_builder.cc:
src/python/m5/objects/BaseCPU.py:
Remove stats_reset_inst.
src/cpu/o3/commit_impl.hh:
src/cpu/ozone/lw_back_end_impl.hh:
Get TC, not XCProxy.
src/cpu/o3/cpu.cc:
Switch out updates from the version of m5 I have. Also remove serialize code that got added twice.
src/cpu/o3/iew_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/thread_state.hh:
Remove code that was added twice.
src/cpu/o3/lsq_unit.hh:
Add back in stats that got lost in the merge.
src/cpu/o3/lsq_unit_impl.hh:
Use proper method to get flags. Also wake CPU if we're coming back from a cache miss.
src/cpu/o3/thread_context_impl.hh:
src/cpu/o3/thread_state.hh:
Support profiling.
src/cpu/ozone/cpu.hh:
Update to use proper typename.
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/dyn_inst_impl.hh:
Updates for newmem.
src/cpu/ozone/lw_lsq_impl.hh:
Get flags correctly.
src/cpu/ozone/thread_state.hh:
Reorder constructor initialization, use tc.
src/sim/pseudo_inst.cc:
Allow for loading of symbol file. Be sure to use ThreadContext and not ExecContext.
3125:febd811bccc6 Sat Sep 30 23:43:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Merge ktlim@zamp:./local/clean/o3-merge/m5
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem

configs/boot/micro_memlat.rcS:
configs/boot/micro_tlblat.rcS:
src/arch/alpha/ev5.cc:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa_traits.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.hh:
src/cpu/checker/cpu_impl.hh:
src/cpu/o3/alpha/cpu_impl.hh:
src/cpu/o3/alpha/params.hh:
src/cpu/o3/checker_builder.cc:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/base.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.hh:
src/dev/ide_disk.cc:
src/python/m5/objects/O3CPU.py:
src/python/m5/objects/Root.py:
src/python/m5/objects/System.py:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/system.hh:
util/m5/m5.c:
Hand merge.
2881:5bcfebdbd31d Mon Jul 10 00:03:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Fix cpu in full system to match SE.
2856:89691405ec9c Fri Jul 07 15:15:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Update cpus to use the getPort function to use a connector object to connect the I/D cache ports to memory

configs/test/test.py:
Update to use new cpu getPort functionality
src/cpu/base.cc:
Make cpu's a memObject to expose getPort interface
src/cpu/base.hh:
Make cpu's a memObject to export getPort interface
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Now use the connector via getPort interface
src/mem/cache/base_cache.cc:
Make sure the cache recognizes all port names
/gem5/src/base/
H A Dremote_gdb.cc3960:1dca397b2bab Wed Dec 20 18:39:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Initial work to make remote gdb available in SE mode. This is completely untested.
3603:714467743f9b Fri Nov 10 20:17:00 EST 2006 Ali Saidi <saidi@eecs.umich.edu> fix endian issues with condition codes
use memcpy instead of bcopy
s/u_int32_t/uint32_t/g
fixup endian code to work with solaris
hack to make sure htole() works... Nate, have a good idea to fix this?

src/arch/sparc/faults.cc:
set the reset address to be 40 bits. Makes PC printing easier at least for now.
src/arch/sparc/isa/base.isa:
fix endian issues with condition codes
src/arch/sparc/tlb.hh:
add implemented physical addres constants
src/arch/sparc/utility.hh:
add tlb.hh to utilities
src/base/loader/raw_object.cc:
add a symbol <filename>_start to the symbol table for binaries files
src/base/remote_gdb.cc:
use memcpy instead of bcopy
src/cpu/exetrace.cc:
clean up printing a bit more
src/cpu/m5legion_interface.h:
add tons to the shared interface
src/dev/ethertap.cc:
s/u_int32_t/uint32_t/g
src/dev/ide_atareg.h:
fixup endian code to work with solaris
src/dev/pcidev.cc:
src/sim/param.hh:
hack to make sure htole() works...
3579:e9976b62c259 Wed Nov 08 15:31:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Make a function to say how big gdbregs is in bytes vs. regs.
3550:515e876568b4 Tue Nov 07 05:39:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Broke remote_gdb into a base class and architecture specific derived classes.
3536:89aa06409e4d Mon Nov 06 18:29:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Remote GDB support has been changed to use inheritance. Alpha should work, but isn't tested. Other architectures will not.
3082:2b5c51982f78 Mon Aug 28 12:58:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Fix remote gdb buffer overflow.
2684:71f3cabf891f Thu Jun 08 19:03:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> add write/read functions that have endian conversions in them
when we get a virtual port delete it (even though delete does nothing in these cases)

src/arch/alpha/linux/system.cc:
src/arch/alpha/stacktrace.cc:
src/base/remote_gdb.cc:
src/cpu/simple_thread.cc:
when we get a virtual port delete it (even though delete does nothing in this case)
src/mem/port.hh:
src/mem/vport.hh:
add write/read functions that have endian conversions in them
2680:246e7104f744 Tue Jun 06 17:32:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Change ExecContext to ThreadContext. This is being renamed to differentiate between the interface used objects outside of the CPU, and the interface used by the ISA. ThreadContext is used by objects outside of the CPU and is specifically defined in thread_context.hh. ExecContext is more implicit, and is defined by files such as base_dyn_inst.hh or cpu/simple/base.hh.

Further renames/reorganization will be coming shortly; what is currently CPUExecContext (the old ExecContext from m5) will be renamed to SimpleThread or something similar.

src/arch/alpha/arguments.cc:
src/arch/alpha/arguments.hh:
src/arch/alpha/ev5.cc:
src/arch/alpha/faults.cc:
src/arch/alpha/faults.hh:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/freebsd/system.hh:
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/linux/system.hh:
src/arch/alpha/linux/threadinfo.hh:
src/arch/alpha/process.cc:
src/arch/alpha/regfile.hh:
src/arch/alpha/stacktrace.cc:
src/arch/alpha/stacktrace.hh:
src/arch/alpha/tlb.cc:
src/arch/alpha/tlb.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/system.cc:
src/arch/alpha/tru64/system.hh:
src/arch/alpha/utility.hh:
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/process.cc:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/regfile/regfile.hh:
src/arch/mips/stacktrace.hh:
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/regfile.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/stacktrace.hh:
src/arch/sparc/ua2005.cc:
src/arch/sparc/utility.hh:
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
src/base/remote_gdb.cc:
src/base/remote_gdb.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/cpu_exec_context.cc:
src/cpu/cpu_exec_context.hh:
src/cpu/cpuevent.cc:
src/cpu/cpuevent.hh:
src/cpu/exetrace.hh:
src/cpu/intr_control.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/pc_event.cc:
src/cpu/pc_event.hh:
src/cpu/profile.cc:
src/cpu/profile.hh:
src/cpu/quiesce_event.cc:
src/cpu/quiesce_event.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
src/cpu/thread_state.hh:
src/dev/alpha_console.cc:
src/dev/ns_gige.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/linux/events.cc:
src/kern/linux/events.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/kern/tru64/dump_mbuf.cc:
src/kern/tru64/tru64.hh:
src/kern/tru64/tru64_events.cc:
src/kern/tru64/tru64_events.hh:
src/mem/vport.cc:
src/mem/vport.hh:
src/sim/faults.cc:
src/sim/faults.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
src/sim/system.cc:
src/cpu/thread_context.hh:
src/sim/system.hh:
src/sim/vptr.hh:
Change ExecContext to ThreadContext.
2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
2632:1bb2f91485ea Mon May 22 14:29:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.
/gem5/src/cpu/o3/
H A Dthread_context.hh3789:9ce219516b5d Thu Dec 07 18:49:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Compilation fixes
3784:edc6cff4cbc1 Wed Dec 06 11:39:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Got rid of some typedefs and moved the tlbs into the base o3 cpu.
3686:fa8d8b90cd8a Wed Nov 29 16:07:00 EST 2006 Kevin Lim <ktlim@umich.edu> Change the connecting of the physPort and virtPort to the memory object below the CPU to happen every time activateContext is called. The overhead is probably a little higher than necessary, but allows these connections to properly be made when there are CPUs that are inactive until they are switched in.

Right now this introduces a minor memory leak as old physPorts and virtPorts are not deleted when new ones are created. A flyspray task has been created for this issue. It can not be resolved until we determine how the bus will handle giving out ID's to functional ports that may be deleted.

src/cpu/o3/cpu.cc:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Change the setup of the physPort and virtPort to instead happen every time the CPU has a context activated. This is a little high overhead, but keeps it working correctly when the CPU does not have a physical memory attached to it until it switches in (like the case of switch CPUs).
src/cpu/o3/thread_context.hh:
Change function from being called at init() to just being called whenever the memory ports need to be connected.
src/cpu/o3/thread_context_impl.hh:
Update this to not delete the port if it's the same as the virtPort.
src/cpu/thread_context.hh:
Change function from being called at init() to whenever the memory ports need to be connected.
src/cpu/thread_state.cc:
Instead of initializing the ports, simply connect them, deleting any old ports that might exist. This allows these functions to be called multiple times.
src/cpu/thread_state.hh:
Ports are no longer initialized, but rather connected at context activation time.
3675:dc883b610345 Sun Nov 19 17:43:00 EST 2006 Kevin Lim <ktlim@umich.edu> Update Virtual and Physical ports.

src/cpu/o3/alpha/cpu_impl.hh:
Handle the PhysicalPort and VirtualPort in the ThreadState.
src/cpu/o3/cpu.cc:
Initialize the thread context.
src/cpu/o3/thread_context.hh:
Add new function to initialize thread context.
src/cpu/o3/thread_context_impl.hh:
Use code now put into function.
src/cpu/simple_thread.cc:
Move code to ThreadState and use the new helper function.
src/cpu/simple_thread.hh:
Remove init() in this derived class; use init() from ThreadState base class.
src/cpu/thread_state.cc:
Move setting up of Physical and Virtual ports here. Change getMemFuncPort() to connectToMemFunc(), which connects a port to a functional port of the memory object below the CPU.
src/cpu/thread_state.hh:
Update functions.
3548:85e64c82c522 Tue Nov 07 05:36:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Moved the switched version of kernel_stats.hh back to kern, and moved the base kernel_stats to base_kernel_stats
3468:cf23ad1ceef2 Wed Nov 01 16:44:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Adjustments for the AlphaTLB changing to AlphaISA::TLB and changing register file functions to not take faults
2935:d1223a6c9156 Sun Jul 23 13:39:00 EDT 2006 Korey Sewell <ksewell@umich.edu> This changeset gets the MIPS ISA pretty much working in the O3CPU. It builds, runs, and gets very very close to completing the hello world
succesfully but there are some minor quirks to iron out. Who would've known a DELAY SLOT introduces that much complexity?! arrgh!

Anyways, a lot of this stuff had to do with my project at MIPS and me needing to know how I was going to get this working for the MIPS
ISA. So I figured I would try to touch it up and throw it in here (I hate to introduce non-completely working components... )

src/arch/alpha/isa/mem.isa:
spacing
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
Gabe really authored this
src/arch/mips/isa/decoder.isa:
add StoreConditional Flag to instruction
src/arch/mips/isa/formats/basic.isa:
Steven really did this file
src/arch/mips/isa/formats/branch.isa:
fix bug for uncond/cond control
src/arch/mips/isa/formats/mem.isa:
Adjust O3CPU memory access to use new memory model interface.
src/arch/mips/isa/formats/util.isa:
update LoadStoreBase template
src/arch/mips/isa_traits.cc:
update SERIALIZE partially
src/arch/mips/process.cc:
src/arch/mips/process.hh:
no need for this for NOW. ASID/Virtual addressing handles it
src/arch/mips/regfile/misc_regfile.hh:
add in clear() function and comments for future usage of special misc. regs
src/cpu/base_dyn_inst.hh:
add in nextNPC variable and supporting functions.

add isCondDelaySlot function

Update predTaken and mispredicted functions
src/cpu/base_dyn_inst_impl.hh:
init nextNPC
src/cpu/o3/SConscript:
add MIPS files to compile
src/cpu/o3/alpha/thread_context.hh:
no need for my name on this file
src/cpu/o3/bpred_unit_impl.hh:
Update RAS appropriately for MIPS
src/cpu/o3/comm.hh:
add some extra communication variables to aid in handling the
delay slots
src/cpu/o3/commit.hh:
minor name fix for nextNPC functions.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rename_impl.hh:
Fix necessary variables and functions for squashes with delay slots
src/cpu/o3/cpu.cc:
Update function interface ...

adjust removeInstsNotInROB function to recognize delay slots insts
src/cpu/o3/cpu.hh:
update removeInstsNotInROB
src/cpu/o3/decode.hh:
declare necessary variables for handling delay slot
src/cpu/o3/dyn_inst.hh:
Add in MipsDynInst
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/rename.hh:
declare necessary variables and adjust functions for handling delay slot
src/cpu/o3/inst_queue.hh:
src/cpu/simple/base.cc:
no need for my name here
src/cpu/o3/isa_specific.hh:
add in MIPS files
src/cpu/o3/scoreboard.hh:
dont include alpha specific isa traits!
src/cpu/o3/thread_context.hh:
no need for my name here, i just rearranged where the file goes
src/cpu/static_inst.hh:
add isCondDelaySlot function
src/cpu/o3/mips/cpu.cc:
src/cpu/o3/mips/cpu.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/mips/dyn_inst.cc:
src/cpu/o3/mips/dyn_inst.hh:
src/cpu/o3/mips/dyn_inst_impl.hh:
src/cpu/o3/mips/impl.hh:
src/cpu/o3/mips/params.hh:
src/cpu/o3/mips/thread_context.cc:
src/cpu/o3/mips/thread_context.hh:
MIPS file for O3CPU...mirrors ALPHA definition
2875:9b6f6b75b187 Fri Jul 07 04:06:00 EDT 2006 Korey Sewell <ksewell@umich.edu> Fix so that O3CPU doesnt segfault on exit.
Major thing was to not execute commit if there are no active threads in CPU.

src/cpu/o3/alpha/thread_context.hh:
call deallocate instead of deallocateContext
src/cpu/o3/commit_impl.hh:
dont run commit stage if there are no instructions
src/cpu/o3/cpu.cc:
add deallocate event, deactivateThread function, and edit deallocateContext.
src/cpu/o3/cpu.hh:
add deallocate event and add optional delay to deallocateContext
src/cpu/o3/thread_context.hh:
optional delay for deallocate
src/cpu/o3/thread_context_impl.hh:
edit DPRINTFs to say Thread Context instead of Alpha TC
src/cpu/thread_context.hh:
optional delay
src/sim/syscall_emul.hh:
name stuff
2834:c8342a71404b Mon Jul 03 00:19:00 EDT 2006 Korey Sewell <ksewell@umich.edu> Fix for FS O3CPU compile ... missing forward class declaration/header file after files got split for ISA-independence

src/cpu/o3/alpha/thread_context.hh:
Use 'this' when accessing cpu
src/cpu/o3/cpu.hh:
add numActiveThreds function
src/cpu/o3/thread_context.hh:
forward class declarations
src/cpu/o3/thread_context_impl.hh:
add quiesce event header file
src/cpu/thread_context.hh:
add exit() function to thread context (read comments in file)
src/sim/syscall_emul.cc:
adjust exitFunc syscall
2817:273f7fb94f83 Fri Jun 30 19:52:00 EDT 2006 Korey Sewell <ksewell@umich.edu> Make O3CPU model independent of the ISA

Use O3CPU when building instead of AlphaO3CPU.

I could use some better python magic in the cpu_models.py file!

AUTHORS:
add middle initial
SConstruct:
change from AlphaO3CPU to O3CPU
src/cpu/SConscript:
edits to build O3CPU instead of AlphaO3CPU
src/cpu/cpu_models.py:
change substitution template to use proper CPU EXEC CONTEXT For O3CPU Model...

Actually, some Python expertise could be used here. The 'env' variable is not
passed to this file, so I had to parse through the ARGV to find the ISA...
src/cpu/o3/base_dyn_inst.cc:
src/cpu/o3/bpred_unit.cc:
src/cpu/o3/commit.cc:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode.cc:
src/cpu/o3/fetch.cc:
src/cpu/o3/iew.cc:
src/cpu/o3/inst_queue.cc:
src/cpu/o3/lsq.cc:
src/cpu/o3/lsq_unit.cc:
src/cpu/o3/mem_dep_unit.cc:
src/cpu/o3/rename.cc:
src/cpu/o3/rob.cc:
use isa_specific.hh
src/sim/process.cc:
only initi NextNPC if not ALPHA
src/cpu/o3/alpha/cpu.cc:
alphao3cpu impl
src/cpu/o3/alpha/cpu.hh:
move AlphaTC to it's own file
src/cpu/o3/alpha/cpu_impl.hh:
Move AlphaTC to it's own file ...
src/cpu/o3/alpha/dyn_inst.cc:
src/cpu/o3/alpha/dyn_inst.hh:
src/cpu/o3/alpha/dyn_inst_impl.hh:
include paths
src/cpu/o3/alpha/impl.hh:
include paths, set default MaxThreads to 2 instead of 4
src/cpu/o3/alpha/params.hh:
set Alpha Specific Params here
src/python/m5/objects/O3CPU.py:
add O3CPU class
src/cpu/o3/SConscript:
include isa-specific build files
src/cpu/o3/alpha/thread_context.cc:
NEW HOME of AlphaTC
src/cpu/o3/alpha/thread_context.hh:
new home of AlphaTC
src/cpu/o3/isa_specific.hh:
includes ISA specific files
src/cpu/o3/params.hh:
base o3 params
src/cpu/o3/thread_context.hh:
base o3 thread context
src/cpu/o3/thread_context_impl.hh:
base o3 thead context impl
/gem5/src/arch/sparc/
H A Dua2005.cc3831:2a4e8de75870 Sat Dec 09 18:27:00 EST 2006 Ali Saidi <saidi@eecs.umich.edu> fix lisa's hand merge
3828:9444f62adb12 Fri Dec 08 15:07:00 EST 2006 Lisa Hsu <hsul@eecs.umich.edu> Merge zizzer:/bk/sparcfs
into zed.eecs.umich.edu:/z/hsul/work/sparc/m5

src/arch/sparc/ua2005.cc:
hand merge
3827:030cb88ad449 Fri Dec 08 14:37:00 EST 2006 Lisa Hsu <hsul@eecs.umich.edu> mostly implemented SOFTINT relevant interrupt stuff.

src/arch/sparc/interrupts.hh:
add in thread_context.hh to get access to tc.
get rid of stubs that don't make sense right now.
implement checking and get softint interrupts
src/arch/sparc/miscregfile.cc:
softint should be OR-ed on a write.
src/arch/sparc/miscregfile.hh:
add some enums for state fields for easy access to bitmasks of HPSTATE and PSTATE regs.
src/arch/sparc/ua2005.cc:
implement writing SOFTINT, PSTATE, PIL, and HPSTATE properly, add helpful info to panic for bad reg write.
3825:9b5e6c4d3ecb Thu Dec 07 18:50:00 EST 2006 Ali Saidi <saidi@eecs.umich.edu> get legion/m5 to first tlb miss fault

src/arch/sparc/asi.cc:
src/arch/sparc/asi.hh:
add sparc error asi
src/arch/sparc/faults.cc:
put a panic in if TL == MaxTL
src/arch/sparc/isa/decoder.isa:
Hpstate needs to be updated on a done too
src/arch/sparc/miscregfile.cc:
warn istead of panicing of fprs/fsr accesses
src/arch/sparc/tlb.cc:
add sparc error register code that just does nothing
fix a couple of other tlb bugs
src/arch/sparc/ua2005.cc:
fix implementation of HPSTATE write
src/cpu/exetrace.cc:
let exectrate mess up a couple of times before dying
src/python/m5/objects/T1000.py:
add l2 error status register fake devices
3817:7df12d77afc2 Mon Dec 04 19:39:00 EST 2006 Ali Saidi <saidi@eecs.umich.edu> reogranize code to split off FS only misc regs with effect into their own file (reducing the number of if FULL_SYSTEM defines and includes)
Protect other pieces of code so that sparc compiles SE again

src/arch/sparc/SConscript:
Add ua2005.cc back into SConscript
src/arch/sparc/miscregfile.hh:
add functions that deal with priv registers so we don't have to have a bunch of if defs and other ugliness
src/arch/sparc/mmaped_ipr.hh:
wrap handleIpr* with if full_system so it compiles under se
src/arch/sparc/ua2005.cc:
reorganize edit fs only miscreg functions
src/cpu/exetrace.cc:
protect legion code so it doesn't try to compile under se
2982:0ecdb0879b14 Mon Aug 14 19:25:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Fix up doxygen.
2680:246e7104f744 Tue Jun 06 17:32:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Change ExecContext to ThreadContext. This is being renamed to differentiate between the interface used objects outside of the CPU, and the interface used by the ISA. ThreadContext is used by objects outside of the CPU and is specifically defined in thread_context.hh. ExecContext is more implicit, and is defined by files such as base_dyn_inst.hh or cpu/simple/base.hh.

Further renames/reorganization will be coming shortly; what is currently CPUExecContext (the old ExecContext from m5) will be renamed to SimpleThread or something similar.

src/arch/alpha/arguments.cc:
src/arch/alpha/arguments.hh:
src/arch/alpha/ev5.cc:
src/arch/alpha/faults.cc:
src/arch/alpha/faults.hh:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/freebsd/system.hh:
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/linux/system.hh:
src/arch/alpha/linux/threadinfo.hh:
src/arch/alpha/process.cc:
src/arch/alpha/regfile.hh:
src/arch/alpha/stacktrace.cc:
src/arch/alpha/stacktrace.hh:
src/arch/alpha/tlb.cc:
src/arch/alpha/tlb.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/system.cc:
src/arch/alpha/tru64/system.hh:
src/arch/alpha/utility.hh:
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/process.cc:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/regfile/regfile.hh:
src/arch/mips/stacktrace.hh:
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/regfile.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/stacktrace.hh:
src/arch/sparc/ua2005.cc:
src/arch/sparc/utility.hh:
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
src/base/remote_gdb.cc:
src/base/remote_gdb.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/cpu_exec_context.cc:
src/cpu/cpu_exec_context.hh:
src/cpu/cpuevent.cc:
src/cpu/cpuevent.hh:
src/cpu/exetrace.hh:
src/cpu/intr_control.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/pc_event.cc:
src/cpu/pc_event.hh:
src/cpu/profile.cc:
src/cpu/profile.hh:
src/cpu/quiesce_event.cc:
src/cpu/quiesce_event.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
src/cpu/thread_state.hh:
src/dev/alpha_console.cc:
src/dev/ns_gige.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/linux/events.cc:
src/kern/linux/events.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/kern/tru64/dump_mbuf.cc:
src/kern/tru64/tru64.hh:
src/kern/tru64/tru64_events.cc:
src/kern/tru64/tru64_events.hh:
src/mem/vport.cc:
src/mem/vport.hh:
src/sim/faults.cc:
src/sim/faults.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
src/sim/system.cc:
src/cpu/thread_context.hh:
src/sim/system.hh:
src/sim/vptr.hh:
Change ExecContext to ThreadContext.
2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
2651:76db2c628241 Mon May 29 18:24:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Create a new CpuEvent class that has a pointer to an execution context in the object and places itself on a global list so
so the events can be migrated on cpu switches.
Create a new wrapper classe called CpuEventWrapper that works like the old wrapper class but calls the function with the xc
parameter
Use new CpuEventWrapper class from tick compare events on sparc

src/arch/sparc/regfile.hh:
Use new CpuEventWrapper class from tick compare events
src/arch/sparc/ua2005.cc:
Move definition to to a fullsystem only file, since it is.
src/cpu/base.cc:
On switch from one cpu to another CpuEvent::replaceExecContext() needs to be called on all (oldxc,newxc) pairs.
2650:a012c079984a Mon May 29 16:53:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> split off fullsystem and se iprs into two functions to remove lots of #ifs
setup all initialization stuff for UA2005
Setup fullsys build options
Start to make fullsystem compile

src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
RCS to BitKeeper
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add support for doing virtual to physical translation using the in-memory
page table
src/arch/sparc/vtophys.cc:
a tad bit of error checking
src/arch/sparc/vtophys.hh:
Cleanup of full-system global variables, primarily in simple_cpu.cc,
to allow multi-system simulations. (Multiple systems not yet yested
though.) Also changes to build sim_smt in full-system mode (though
with only SimpleCPU and not the full timing CPU for now).

Still to do: minimize changes in SimpleCPU code between full-system
and application modes... way too many ifdefs there. Much of the
full-system stuff moved into SimpleCPU should be put in a new System
object to allow multiprocessor simulations.

Converted last remaining modules from C to C++ (mostly in /old).
Renamed all .c files to .cc and a few .h files to .hh.

Renamed architecture-specific files in arch/$TARGET from
$TARGET.{cc,hh,def} to machine.{cc,hh,def} to get rid of pointless
intermediate files in object directory. Split exo-specific
definitions out of machine.hh into machine_exo.h.

Specifics:

In machine.def, null resource descriptors must be FUClamd_NA (and not
NA) to pass C++ type checking.

Enhanced error checking/reporting in bas
src/arch/sparc/vtophys.cc:
- Get rid of my String class, the Vector class, the bitvector class, and my
doubly linked list class.
- Convert tokenize, to_number (formerly StringToNumber) and eat_white to
function on stl strings.
- Change most cases of char * and const char * to string, or const string &
- Some formatting and style nits, but not too many.
src/arch/sparc/vtophys.cc:
simplify
src/arch/sparc/vtophys.cc:

Renamed SimpleCPU::(read|write)_(byte|half|word|qword) to just read &
write, overloaded on the type of the 'data' argument. Merged the
full-system and non-full-system implementations of these eight
original functions into two common template functions.

To support this, also renamed (read|write)[1248] on memory_object and
derivatives to just read & write, again overloaded on the type of the
'data' argument. Many of these functions could now be condensed into
a few template functions (though with a level of indirection so that
the interface can remain virtual). I did not do that though.
src/arch/sparc/vtophys.cc:
First pass at compiling with gcc 3.x. Lots of "std::" in header files,
"using namespace std" in source files. (Note policy of not putting "using"
statements in headers or before includes in sources.)

Still not able to compile with gcc 3.2.
Errors:
- Can't create an ifstream from a file descriptor anymore (breaks IniFile).
- "`class MSHR::MSHRegister' is private" errors in mshr.cc and prefetch_cache.cc:
not clear why since it's in the public part of the class declaration.
- cpu.cc:879: can't match a reference and 0 (specifically "no match for `bool ?
SimObjectParam<PipeTrace*>& : int' operator")
- pipetrace.cc: "invalid conversion from `int' to `std::_Ios_Fmtflags'"
Warnings:
- strstream now deprecated... needs some rewriting in sat_counter.hh
and hybrid_pred.hh (need to get all that code out of the headers anyway)
- trace.hh macro problem: cpp now says 'pasting "::" and "Event" does not
give a valid preprocessing token'
- major "implicit typename" issues in base/sized.hh
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Implement some interval statistics for full system mode.
Create a callpal function that is called when a callpal occurs so it's easier
to manipulate the statics.
Rework the vtophys stuff to make it a bit cleaner.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Get rid of almost all old-style object names. This commit is equivalent
to running the following script on the current head:

#! /bin/sh

find \( -name '*.cc' -o -name '*.hh' \) -exec perl -pi -e '\
s/\bmemory_object\b(?!\.hh)/FunctionalMemory/g;\
s/\bvirtual_memory\b(?!\.hh)/VirtualMemory/g;\
s/\bmain_memory\b(?!\.hh)/MainMemory/g;\
s/\bphysical_memory\b(?!\.hh)/PhysicalMemory/g;\
s/\bspec_memory\b(?!\.hh)/SpeculativeMemory/g;\
s/\bMemObj\b(?!\.hh)/TimingMemObj/g;\
s/\bmemory_translation\b(?!\.hh)/AddressTranslator/g;\
s/\balpha_tlb\b(?!\.hh)/AlphaTlb/g;\
s/\balpha_itb\b(?!\.hh)/AlphaItb/g;\
s/\balpha_dtb\b(?!\.hh)/AlphaDtb/g;\
s/\bmemory_controller\b(?!\.hh)/MemoryController/g;\
s/\bstorebuffer_t\b(?!\.hh)/StoreBuffer/g;\
s/\bstorebuffer_entry_t\b(?!\.hh)/StoreBufferEntry/g;\
s/\bcreate_vector_t\b(?!\.hh)/CreateVector/g;\
s/\bcv_spec_state\b(?!\.hh)/CreateVecSpecState/g;\
s/\bspec_state_list\b(?!\.hh)/SpecStateList/g;\
s/\bdyn_inst_t\b(?!\.hh)/DynInst/g;' {} \;
src/arch/sparc/vtophys.cc:
since cprintf properly deals with 64-bit types, stop using FMT* as much as
possible
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Change byte_t etc. to C99 standard int8_t etc.
Other than old/host.h, all other changes were produced by this script:

#! /bin/sh

find \( -name '*.cc' -o -name '*.hh' -o -name '*.c' -o -name '*.h' -o -name 'machine.def' \) -exec perl -pi -e '\
s/\bbyte_t\b(?!\.hh)/uint8_t/g;\
s/\bsbyte_t\b(?!\.hh)/int8_t/g;\
s/\bhalf_t\b(?!\.hh)/uint16_t/g;\
s/\bshalf_t\b(?!\.hh)/int16_t/g;\
s/\bword_t\b(?!\.hh)/uint32_t/g;\
s/\bsword_t\b(?!\.hh)/int32_t/g;\
s/\bqword_t\b(?!\.hh)/uint64_t/g;\
s/\bsqword_t\b(?!\.hh)/int64_t/g;\
s/\bbool_t\b(?!\.hh)/bool/g;\
s/\bdfloat_t\b(?!\.hh)/double/g;\
s/\bsfloat_t\b(?!\.hh)/float/g;' {} \;
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add CVS Id tags
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Massive renaming to (almost) eliminate all md_* and MD_* names
in preparation for total exorcism of machine.def.

Most of the changes in this commit were performed with the
following perl script (perl -pi <script> <files>). A small
amount of manual fixup was needed to (mostly getting rid of
the Addr typedefs in the various memory objects now that
the former md_addr_t has that name).

# rename machine-dependent types and constants (will be moving into ISA traits object)
s/md_addr_t/Addr/g;
s/md_intreg_t/IntReg/g;
s/md_gpr_t/IntRegFile/g;
s/md_fpreg_t/FloatReg/g;
s/md_fpr_t/FloatRegFile/g;
s/md_ctrlreg_t/MiscReg/g;
s/md_ctrl_t/MiscRegFile/g;
s/md_ipr_t/InternalProcReg/g;
s/md_anyreg_t/AnyReg/g;
s/md_inst_t/MachInst/g;
s/regs_t/RegFile/g;
# manually fix declaration in old/regs.h and a few forward decls
s/struct RegFile/RegFile/g;
s/MD_NUM_IREGS/NumIntRegs/g;
s/MD_NUM_FREGS/NumFloatRegs/g;
s/MD_NUM_CREGS/NumMiscRegs/g;
s/MD_IPR_NUM/NumInternalProcRegs/g;
s/MD_TOTAL_REGS/TotalNumRegs/g;
s/MD_REG_ZERO/ZeroReg/g;
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
New ISA description system. No more machine.def!
Instructions are now decoded into StaticInst objects, and all static
instruction properties (including execution behavior) are associated
with those objects. Extended documentation in progress.
Currently supports Alpha only; PISA will not compile.
Use END_OF_MACHINE_DOT_DEF tag to extract previous version.
src/arch/sparc/vtophys.cc:
get rid of MD_IPR_foo and call it IPR_foo
add some comments to describe what the various PALtemp registers do
formatting
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
license
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
a little style
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add attribution to license.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Make include paths explicit.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
CopyData and CopyString moved from kernel.cc to vtophys.cc
kernel.cc and kernel.hh moved to kern/tru64
src/arch/sparc/vtophys.hh:
Include isa_traits.hh for Addr
src/arch/sparc/vtophys.cc:
formatting fixes
src/arch/sparc/vtophys.cc:
fix up vtophys to deal with translations if there
is no ptbr, and to deal with PAL addresses
add ptomem which is just a wrapper for dma_addr
src/arch/sparc/vtophys.hh:
add ptomem which is a wrapper for dma_addr with the
same usage as vtomem
src/arch/sparc/vtophys.cc:
Fix to remote debugger while in PAL code
src/arch/sparc/vtophys.cc:
Remote an old hack that is now unnecessary
src/arch/sparc/vtophys.cc:
Removed buggy code that tries to fix PAL addresses (may cause problems
while trying to debug in PAL code, but that should do this fix outside
of vtophys)
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Updated Copyright
src/arch/sparc/vtophys.cc:
added back some code andrew removed and couldn't remember why.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
rename CopyData to CopyOut and implement CopyIn to copy data
from the simulator into the simulatee
src/arch/sparc/vtophys.cc:
fixed a bad merge from linux<->tru64
src/arch/sparc/vtophys.cc:
Check max address pal can be at so we don't do the wrong conversion
if gdb asks for an unaligned access.
src/arch/sparc/vtophys.cc:
PGOFSET -> ALPHA_PGOFSET to avoid include file problems
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
in the arch/alpha directory we should use arch/alpha, not
targetarch. sort includes while we're here.
src/arch/sparc/vtophys.cc:
use new constants, functions and structs to clean up the
vtophys code.
src/arch/sparc/vtophys.hh:
Clean up a little bit and make the protypes match new changes.
src/arch/sparc/vtophys.cc:
deal with isa addition
src/arch/sparc/vtophys.cc:
shuffle files around for new directory structure
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Remove RCS Id string
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Update copyright dates and author list
src/arch/sparc/vtophys.cc:
Added a using directive for AlphaISA
src/arch/sparc/vtophys.hh:
Added the AlphaISA namespace specifier where needed
src/arch/sparc/vtophys.hh:
Made Addr a global type
src/arch/sparc/vtophys.cc:
Change access to the IPR to go through the XC.
src/arch/sparc/vtophys.cc:
Avoid directly accessing objects within the XC.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
fixed for new memory system
put in namespace AlphaISA
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
Remove authors from copyright.
src/arch/sparc/vtophys.cc:
bk cp alpha/vtophys.cc sparc/vtophys.cc
src/arch/sparc/vtophys.hh:
bk cp alpha/vtophys.hh sparc/vtophys.hh
src/arch/sparc/SConscript:
remove fullsystem files that don't exist
src/arch/sparc/isa_traits.hh:
split off fullsystem and se iprs into two functions to remove lots of #ifs
src/arch/sparc/regfile.hh:
split off fullsystem and se iprs into two functions to remove lots of #ifs
setup all initialization stuff for UA2005
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
Add system level tick storage to make stick be syncronized across multiple processors
src/arch/sparc/vtophys.hh:
start to create a vtophys for Sparc
src/base/loader/symtab.hh:
Addr is defined in sim/host.hh
/gem5/src/arch/
H A Disa_parser.py3954:d689b611d9dc Mon Dec 18 02:09:00 EST 2006 Steve Reinhardt <stever@eecs.umich.edu> Minor cleanup of new snippet/subst code.
3953:300d526414e6 Sun Dec 17 22:27:00 EST 2006 Steve Reinhardt <stever@eecs.umich.edu> Convert Alpha (and finish converting MIPS) to new
InstObjParam interface.

src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/fp.isa:
src/arch/alpha/isa/int.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/isa/mem.isa:
src/arch/alpha/isa/pal.isa:
src/arch/mips/isa/formats/mem.isa:
src/arch/mips/isa/formats/util.isa:
Get rid of CodeBlock calls to adapt to new InstObjParam interface.
src/arch/isa_parser.py:
Check template code for operands (in addition to snippets).
src/cpu/o3/alpha/dyn_inst.hh:
Add (read|write)MiscRegOperand calls to Alpha DynInst.
3950:19a99edda63b Sun Dec 17 10:53:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Compilation fix after messy merge.
3949:b6664282d899 Sat Dec 16 11:35:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Merge zizzer:/bk/newmem
into zower.eecs.umich.edu:/eecshome/m5/newmem

src/arch/isa_parser.py:
src/arch/sparc/isa/formats/mem/basicmem.isa:
src/arch/sparc/isa/formats/mem/blockmem.isa:
src/arch/sparc/isa/formats/mem/util.isa:
src/arch/sparc/miscregfile.cc:
src/arch/sparc/miscregfile.hh:
src/cpu/o3/iew_impl.hh:
Hand Merge
3841:9fe36a649632 Fri Dec 15 13:06:00 EST 2006 Lisa Hsu <hsul@eecs.umich.edu> Merge zizzer:/bk/sparcfs
into zed.eecs.umich.edu:/z/hsul/work/m5/newmem
3829:6612f906efd5 Tue Dec 12 21:19:00 EST 2006 Lisa Hsu <hsul@eecs.umich.edu> Merge zizzer:/bk/newmem
into zed.eecs.umich.edu:/z/hsul/work/sparc/m5
3823:1c8f87aa103e Wed Dec 06 14:29:00 EST 2006 Ali Saidi <saidi@eecs.umich.edu> Many more fixes for SPARC_FS. Gets us to the point where SOFTINT starts
getting touched.

configs/common/FSConfig.py:
Physical memory on the T1 starts at 1MB, The first megabyte is unmapped to catch bugs
src/arch/isa_parser.py:
we should readmiscregwitheffect not readmiscreg
src/arch/sparc/asi.cc:
Fix AsiIsNucleus spelling with respect to header file
Add ASI_LSU_CONTROL_REG to AsiSiMmu
src/arch/sparc/asi.hh:
Fix spelling of two ASIs
src/arch/sparc/isa/decoder.isa:
switch back to defaults letting the isa_parser insert readMiscRegWithEffect
src/arch/sparc/isa/formats/mem/util.isa:
Flesh out priviledgedString with hypervisor checks
Make load alternate set the flags correctly
src/arch/sparc/miscregfile.cc:
insert some forgotten break statements
src/arch/sparc/miscregfile.hh:
Add some comments to make it easier to find which misc register is which number
src/arch/sparc/tlb.cc:
flesh out the tlb memory mapped registers a lot more
src/base/traceflags.py:
add an IPR traceflag
src/mem/request.hh:
Fix a bad assert() in request
3792:dae368e56d0e Sat Dec 16 07:10:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Changes to the isa_parser and affected files to fix an indexing problem with split execute instructions and miscregs aliasing with integer registers.

src/arch/isa_parser.py:
Rearranged things so that classes with more than one execute function treat operands properly.
1. Eliminated the CodeBlock class
2. Created a SubOperandList
3. Redefined how InstObjParams is constructed

To define an InstObjParam, you can either pass in a single code literal which will be named "code", or you can pass in a dictionary of code snippets which will be substituted into the Templates. In order to get this to work, there is a new restriction that each template has only one function in it. These changes should only affect memory instructions which have regular and split execute functions.

Also changed the MiscRegs so that they use the instrunctions srcReg and destReg arrays.
src/arch/sparc/isa/formats/basic.isa:
src/arch/sparc/isa/formats/branch.isa:
src/arch/sparc/isa/formats/integerop.isa:
src/arch/sparc/isa/formats/mem/basicmem.isa:
src/arch/sparc/isa/formats/mem/blockmem.isa:
src/arch/sparc/isa/formats/mem/util.isa:
src/arch/sparc/isa/formats/nop.isa:
src/arch/sparc/isa/formats/priv.isa:
src/arch/sparc/isa/formats/trap.isa:
Rearranged to work with new InstObjParam scheme.
src/cpu/o3/sparc/dyn_inst.hh:
Added functions to access the miscregs using the indexes from instructions srcReg and destReg arrays. Also changed the names of the other accessors so that they have the suffix "Operand" if they use those arrays.
src/cpu/simple/base.hh:
Added functions to access the miscregs using the indexes from instructions srcReg and destReg arrays.
3735:86a7cf4dcc11 Tue Dec 12 12:58:00 EST 2006 Steve Reinhardt <stever@eecs.umich.edu> Rename the StaticInst-based (read|set)(Int|Float)Reg methods to (read|set)(Int|Float)RegOperand to distinguish from non-StaticInst version.
3419:8d92cb467ce4 Thu Oct 26 20:22:00 EDT 2006 Gabe Black <gblack@eecs.umich.edu> Change the default function from setMiscRegWithEffect to setMiscReg
/gem5/src/arch/alpha/
H A Dtlb.cc3838:3d0e174a9d2b Fri Dec 15 00:58:00 EST 2006 Lisa Hsu <hsul@eecs.umich.edu> tlb.cc:
fix namespace indentations

src/arch/alpha/tlb.cc:
fix namespace indentations
3633:524f2aadbc89 Sun Nov 12 20:15:00 EST 2006 Kevin Lim <ktlim@umich.edu> Updates to support new interrupt processing and removal of PcPAL.

src/arch/alpha/interrupts.hh:
No need for this now that the ThreadContext is being used to set these IPRs in interrupts.
Also split up the interrupt checking from the updating of the IPL and interrupt summary.
src/arch/alpha/tlb.cc:
Check the PC for whether or not it's in PAL mode, not the addr.
src/cpu/o3/alpha/cpu.hh:
Split up getting the interrupt from actually processing the interrupt.
src/cpu/o3/alpha/cpu_impl.hh:
Splut up the processing of interrupts.
src/cpu/o3/commit_impl.hh:
Update for ISA-oriented interrupt changes.
src/cpu/o3/fetch_impl.hh:
Fix broken if statement from PcPAL updates, and properly populate the request fields.

Also more debugging output.
src/cpu/ozone/cpu_impl.hh:
Updates for ISA-oriented interrupt stuff.
src/cpu/ozone/front_end_impl.hh:
Populate request fields properly.
src/cpu/simple/base.cc:
Update for interrupt stuff.
3453:c3ce58882751 Tue Oct 31 02:08:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Put the Alpha tlb stuff into the AlphaISA namespace, and give the classes more neutral names.
2984:797622d7b311 Tue Aug 15 04:46:00 EDT 2006 Gabe Black <gblack@eecs.umich.edu> Fixed ALPHA_FS by moving the remnants of isa_fullsys_traits.hh into arch/alpha/pagetable.hh and fixing up some includes
2680:246e7104f744 Tue Jun 06 17:32:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Change ExecContext to ThreadContext. This is being renamed to differentiate between the interface used objects outside of the CPU, and the interface used by the ISA. ThreadContext is used by objects outside of the CPU and is specifically defined in thread_context.hh. ExecContext is more implicit, and is defined by files such as base_dyn_inst.hh or cpu/simple/base.hh.

Further renames/reorganization will be coming shortly; what is currently CPUExecContext (the old ExecContext from m5) will be renamed to SimpleThread or something similar.

src/arch/alpha/arguments.cc:
src/arch/alpha/arguments.hh:
src/arch/alpha/ev5.cc:
src/arch/alpha/faults.cc:
src/arch/alpha/faults.hh:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/freebsd/system.hh:
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/linux/system.hh:
src/arch/alpha/linux/threadinfo.hh:
src/arch/alpha/process.cc:
src/arch/alpha/regfile.hh:
src/arch/alpha/stacktrace.cc:
src/arch/alpha/stacktrace.hh:
src/arch/alpha/tlb.cc:
src/arch/alpha/tlb.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/system.cc:
src/arch/alpha/tru64/system.hh:
src/arch/alpha/utility.hh:
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/process.cc:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/regfile/regfile.hh:
src/arch/mips/stacktrace.hh:
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/regfile.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/stacktrace.hh:
src/arch/sparc/ua2005.cc:
src/arch/sparc/utility.hh:
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
src/base/remote_gdb.cc:
src/base/remote_gdb.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/cpu_exec_context.cc:
src/cpu/cpu_exec_context.hh:
src/cpu/cpuevent.cc:
src/cpu/cpuevent.hh:
src/cpu/exetrace.hh:
src/cpu/intr_control.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/pc_event.cc:
src/cpu/pc_event.hh:
src/cpu/profile.cc:
src/cpu/profile.hh:
src/cpu/quiesce_event.cc:
src/cpu/quiesce_event.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
src/cpu/thread_state.hh:
src/dev/alpha_console.cc:
src/dev/ns_gige.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/linux/events.cc:
src/kern/linux/events.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/kern/tru64/dump_mbuf.cc:
src/kern/tru64/tru64.hh:
src/kern/tru64/tru64_events.cc:
src/kern/tru64/tru64_events.hh:
src/mem/vport.cc:
src/mem/vport.hh:
src/sim/faults.cc:
src/sim/faults.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
src/sim/system.cc:
src/cpu/thread_context.hh:
src/sim/system.hh:
src/sim/vptr.hh:
Change ExecContext to ThreadContext.
2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
2632:1bb2f91485ea Mon May 22 14:29:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.
H A Dprocess.cc3669:3607aaed36b6 Thu Nov 16 03:43:00 EST 2006 Nathan Binkert <binkertn@umich.edu> Implement current working directory for LiveProcesses
3114:7a4771b9b720 Sun Sep 17 03:00:00 EDT 2006 Gabe Black <gblack@eecs.umich.edu> Finished changing how stat structures are translated, fixed the handling of various ids as LiveProcess parameters.

src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/process.hh:
src/arch/alpha/process.cc:
src/arch/alpha/process.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/process.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/linux/process.hh:
src/arch/mips/process.cc:
src/arch/mips/process.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/process.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/solaris/process.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
Changed Process to LiveProcess in syscall handlers and fixed the implementation of uid, euid, gid, egid, pid and ppid as LiveProcess parameters.
src/kern/tru64/tru64.hh:
Changed Process to LiveProcess in syscall handlers and fixed the implementation of uid, euid, gid, egid, pid and ppid as LiveProcess parameters. Also fit tru64 in with the new way to handle stat calls.
2972:f84c6c5309ce Fri Aug 11 19:43:00 EDT 2006 Gabe Black <gblack@eecs.umich.edu> Pushed most of constants.hh back into isa_traits.hh and regfile.hh and created a seperate file for the syscallreturn class.
2715:4032e02b525e Sun Jun 11 21:49:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Move LiveProcess::create() from arch-specific files
bcak to main LiveProcess, then automatically select
ISA based on object file type. Now simulation scripts
no longer need to care about the ISA, as they can just
call LiveProcess().

configs/test/test.py:
Script no longer cares about ISA.
src/arch/alpha/process.cc:
src/arch/alpha/process.hh:
src/arch/mips/process.cc:
src/arch/mips/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/process.hh:
src/sim/process.cc:
src/sim/process.hh:
Move create() from arch-specific files back to
main LiveProcess, then automatically select ISA
based on object file type.
2680:246e7104f744 Tue Jun 06 17:32:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Change ExecContext to ThreadContext. This is being renamed to differentiate between the interface used objects outside of the CPU, and the interface used by the ISA. ThreadContext is used by objects outside of the CPU and is specifically defined in thread_context.hh. ExecContext is more implicit, and is defined by files such as base_dyn_inst.hh or cpu/simple/base.hh.

Further renames/reorganization will be coming shortly; what is currently CPUExecContext (the old ExecContext from m5) will be renamed to SimpleThread or something similar.

src/arch/alpha/arguments.cc:
src/arch/alpha/arguments.hh:
src/arch/alpha/ev5.cc:
src/arch/alpha/faults.cc:
src/arch/alpha/faults.hh:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/freebsd/system.hh:
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/linux/system.hh:
src/arch/alpha/linux/threadinfo.hh:
src/arch/alpha/process.cc:
src/arch/alpha/regfile.hh:
src/arch/alpha/stacktrace.cc:
src/arch/alpha/stacktrace.hh:
src/arch/alpha/tlb.cc:
src/arch/alpha/tlb.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/system.cc:
src/arch/alpha/tru64/system.hh:
src/arch/alpha/utility.hh:
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/process.cc:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/regfile/regfile.hh:
src/arch/mips/stacktrace.hh:
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/regfile.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/stacktrace.hh:
src/arch/sparc/ua2005.cc:
src/arch/sparc/utility.hh:
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
src/base/remote_gdb.cc:
src/base/remote_gdb.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/cpu_exec_context.cc:
src/cpu/cpu_exec_context.hh:
src/cpu/cpuevent.cc:
src/cpu/cpuevent.hh:
src/cpu/exetrace.hh:
src/cpu/intr_control.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/pc_event.cc:
src/cpu/pc_event.hh:
src/cpu/profile.cc:
src/cpu/profile.hh:
src/cpu/quiesce_event.cc:
src/cpu/quiesce_event.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
src/cpu/thread_state.hh:
src/dev/alpha_console.cc:
src/dev/ns_gige.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/linux/events.cc:
src/kern/linux/events.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/kern/tru64/dump_mbuf.cc:
src/kern/tru64/tru64.hh:
src/kern/tru64/tru64_events.cc:
src/kern/tru64/tru64_events.hh:
src/mem/vport.cc:
src/mem/vport.hh:
src/sim/faults.cc:
src/sim/faults.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
src/sim/system.cc:
src/cpu/thread_context.hh:
src/sim/system.hh:
src/sim/vptr.hh:
Change ExecContext to ThreadContext.
2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
2632:1bb2f91485ea Mon May 22 14:29:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.
H A Dstacktrace.cc3570:aacc19068f25 Wed Nov 08 00:52:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Put the ProcessInfo and StackTrace objects into the ISA namespaces.
2684:71f3cabf891f Thu Jun 08 19:03:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> add write/read functions that have endian conversions in them
when we get a virtual port delete it (even though delete does nothing in these cases)

src/arch/alpha/linux/system.cc:
src/arch/alpha/stacktrace.cc:
src/base/remote_gdb.cc:
src/cpu/simple_thread.cc:
when we get a virtual port delete it (even though delete does nothing in this case)
src/mem/port.hh:
src/mem/vport.hh:
add write/read functions that have endian conversions in them
2680:246e7104f744 Tue Jun 06 17:32:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Change ExecContext to ThreadContext. This is being renamed to differentiate between the interface used objects outside of the CPU, and the interface used by the ISA. ThreadContext is used by objects outside of the CPU and is specifically defined in thread_context.hh. ExecContext is more implicit, and is defined by files such as base_dyn_inst.hh or cpu/simple/base.hh.

Further renames/reorganization will be coming shortly; what is currently CPUExecContext (the old ExecContext from m5) will be renamed to SimpleThread or something similar.

src/arch/alpha/arguments.cc:
src/arch/alpha/arguments.hh:
src/arch/alpha/ev5.cc:
src/arch/alpha/faults.cc:
src/arch/alpha/faults.hh:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/freebsd/system.hh:
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/linux/system.hh:
src/arch/alpha/linux/threadinfo.hh:
src/arch/alpha/process.cc:
src/arch/alpha/regfile.hh:
src/arch/alpha/stacktrace.cc:
src/arch/alpha/stacktrace.hh:
src/arch/alpha/tlb.cc:
src/arch/alpha/tlb.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/system.cc:
src/arch/alpha/tru64/system.hh:
src/arch/alpha/utility.hh:
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/process.cc:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/regfile/regfile.hh:
src/arch/mips/stacktrace.hh:
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/regfile.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/stacktrace.hh:
src/arch/sparc/ua2005.cc:
src/arch/sparc/utility.hh:
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
src/base/remote_gdb.cc:
src/base/remote_gdb.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/cpu_exec_context.cc:
src/cpu/cpu_exec_context.hh:
src/cpu/cpuevent.cc:
src/cpu/cpuevent.hh:
src/cpu/exetrace.hh:
src/cpu/intr_control.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/pc_event.cc:
src/cpu/pc_event.hh:
src/cpu/profile.cc:
src/cpu/profile.hh:
src/cpu/quiesce_event.cc:
src/cpu/quiesce_event.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
src/cpu/thread_state.hh:
src/dev/alpha_console.cc:
src/dev/ns_gige.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/linux/events.cc:
src/kern/linux/events.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/kern/tru64/dump_mbuf.cc:
src/kern/tru64/tru64.hh:
src/kern/tru64/tru64_events.cc:
src/kern/tru64/tru64_events.hh:
src/mem/vport.cc:
src/mem/vport.hh:
src/sim/faults.cc:
src/sim/faults.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
src/sim/system.cc:
src/cpu/thread_context.hh:
src/sim/system.hh:
src/sim/vptr.hh:
Change ExecContext to ThreadContext.
2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
2632:1bb2f91485ea Mon May 22 14:29:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.
H A Dtypes.hh2972:f84c6c5309ce Fri Aug 11 19:43:00 EDT 2006 Gabe Black <gblack@eecs.umich.edu> Pushed most of constants.hh back into isa_traits.hh and regfile.hh and created a seperate file for the syscallreturn class.
2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
2632:1bb2f91485ea Mon May 22 14:29:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.
/gem5/src/sim/
H A Dserialize.hh2868:6a7e69fa92d3 Fri Jul 07 16:46:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Take the name of the checkpoint directory in when calling checkpoint() or restoreCheckpoint().

src/sim/main.cc:
src/sim/serialize.cc:
src/sim/serialize.hh:
Take in the directory name when checkpointing.
2799:1c93aed5aa4a Thu Jun 29 21:34:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Remove function that no longer can be used. We should figure out if we want to allow the m5checkpoint pseudoinstruction or not.

src/sim/pseudo_inst.cc:
Remove the setup function from Checkpoint. I'm not sure what we want to do with this pseudoinst.
src/sim/serialize.hh:
Remove setup function.
2797:b5f26b4eacef Thu Jun 29 19:40:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Add in support for quiescing the system, taking checkpoints, restoring from checkpoints, changing memory modes, and switching CPUs.

Key new functions that can be called on the m5 object at the python interpreter:
doQuiesce(root) - A helper function that quiesces the object passed in and all of its children.
resume(root) - Another helper function that tells the object and all of its children that the quiesce is over.
checkpoint(root) - Takes a checkpoint of the system. Checkpoint directory must be set before hand.
setCheckpointDir(name) - Sets the checkpoint directory.
restoreCheckpoint(root) - Restores the values from the checkpoint located in the checkpoint directory.
changeToAtomic(system) - Changes the system and all of its children to atomic memory mode.
changeToTiming(system) - Changes the system and all of its children to timing memory mode.
switchCpus(list) - Takes in a list of tuples, where each tuple is a pair of (old CPU, new CPU). Quiesces the old CPUs, and then switches over to the new CPUs.

src/SConscript:
Remove serializer, replaced by python code.
src/python/m5/__init__.py:
Updates to support quiescing, checkpointing, changing memory modes, and switching CPUs.
src/python/m5/config.py:
Several functions defined on the SimObject for quiescing, changing timing modes, and switching CPUs
src/sim/main.cc:
Add some extra functions that are exported to python through SWIG.
src/sim/serialize.cc:
Change serialization around a bit. Now it is controlled through Python, so there's no need for SerializeEvents or SerializeParams.

Also add in a new unserializeAll() function that loads a checkpoint and handles unserializing all objects.
src/sim/serialize.hh:
Add unserializeAll function and a setCheckpointName function.
src/sim/sim_events.cc:
Add process() function for CountedQuiesceEvent, which calls exitSimLoop() once its counter reaches 0.
src/sim/sim_events.hh:
Add in a CountedQuiesceEvent, which is used when the system is preparing to quiesce. Any objects that can't be quiesced immediately are given a pointer to a CountedQuiesceEvent. The event has its counter set via Python, and as objects finish quiescing they call process() on the event. Eventually the event causes the simulation to stop once all objects have quiesced.
src/sim/sim_object.cc:
Add a few functions for quiescing, checkpointing, and changing memory modes.
src/sim/sim_object.hh:
Add a state variable to all SimObjects that tracks both the timing mode of the object and the quiesce state of the object. Currently this isn't serialized, and I'm not sure it needs to be so long as the timing mode starts up the same after a checkpoint.
2760:4dbf498165ac Sat Jun 17 17:49:00 EDT 2006 Nathan Binkert <binkertn@umich.edu> Add myself to list of authors
2738:5d7a31c7fa29 Tue Jun 13 23:19:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Move SimObject creation and Port connection loops
into Python.
Add Port and VectorPort objects and support for
specifying port connections via assignment.
The whole C++ ConfigNode hierarchy is gone now, as are
C++ Connector objects.

configs/test/fs.py:
configs/test/test.py:
Rewrite for new port connector syntax.
src/SConscript:
Remove unneeded files:
- mem/connector.*
- sim/config*
src/dev/io_device.hh:
src/mem/bridge.cc:
src/mem/bridge.hh:
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/mem_object.hh:
src/mem/physical.cc:
src/mem/physical.hh:
Allow getPort() to take an optional index to
support vector ports (eventually).
src/python/m5/__init__.py:
Move SimObject construction and port connection
operations into Python (with C++ calls).
src/python/m5/config.py:
Move SimObject construction and port connection
operations into Python (with C++ calls).
Add support for declaring and connecting MemObject
ports in Python.
src/python/m5/objects/Bus.py:
src/python/m5/objects/PhysicalMemory.py:
Add port declaration.
src/sim/builder.cc:
src/sim/builder.hh:
src/sim/serialize.cc:
src/sim/serialize.hh:
ConfigNodes are gone; builder just gets the
name of a .ini file section now.
src/sim/main.cc:
Move SimObject construction and port connection
operations into Python (with C++ calls).
Split remaining initialization operations into two parts,
loadIniFile() and finalInit().
src/sim/param.cc:
src/sim/param.hh:
SimObject resolution done globally in Python now
(not via ConfigNode hierarchy).
src/sim/sim_object.cc:
Remove unneeded #include.
2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
2632:1bb2f91485ea Mon May 22 14:29:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.
H A Dsystem.cc3960:1dca397b2bab Wed Dec 20 18:39:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Initial work to make remote gdb available in SE mode. This is completely untested.
3812:eaa215123a26 Thu Nov 30 15:51:00 EST 2006 Ali Saidi <saidi@eecs.umich.edu> Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it

configs/common/FSConfig.py:
We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
Let kernel be none
src/sim/system.cc:
Let the system kernel be none, but warn about it
3536:89aa06409e4d Mon Nov 06 18:29:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Remote GDB support has been changed to use inheritance. Alpha should work, but isn't tested. Other architectures will not.
3162:e664ad1ab5fe Fri Oct 06 21:45:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> system.cc:
Make new_page() check for an out of memory condition

src/sim/system.cc:
Make new_page() check for an out of memory condition
2902:695d4683916e Thu Jul 13 15:48:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> add system.mem_mode = ['timing', 'atomic']
update scripts acordingly

configs/test/SysPaths.py:
new syspaths from nate, this one allows you to set script, binary, and disk paths like
system.dir = 'aouaou' in your script
configs/test/fs.py:
update for system mem_mode
Put small checkpoint example
Make clock 1THz
configs/test/test.py:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/system.cc:
src/arch/alpha/tru64/system.cc:
src/arch/sparc/system.cc:
src/python/m5/objects/System.py:
src/sim/system.cc:
src/sim/system.hh:
update for system mem_mode
src/dev/io_device.cc:
Use time returned from sendAtomic to delay
2901:f9a45473ab55 Wed Jul 12 20:22:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> memory mode information now contained in system object
States are now running, draining, or drained. memory state information moved into system object
system parameter is not fs only for cpus
Implement drain() support in devices
Update for drain() call that returns number of times drain_event->process() will be called

Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine

src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
Since se mode has a system, allow access to it
Verify that the atomic cpu is connected to an atomic system on resume
src/cpu/simple/base.cc:
Since se mode has a system, allow access to it
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system
Since se mode has a system, allow access to it
Verify that the timing cpu is connected to an timing system on resume
src/dev/ide_disk.cc:
src/dev/io_device.cc:
src/dev/io_device.hh:
src/dev/ns_gige.cc:
src/dev/ns_gige.hh:
src/dev/pcidev.cc:
src/dev/pcidev.hh:
src/dev/sinic.cc:
src/dev/sinic.hh:
Implement drain() support in devices
src/python/m5/config.py:
Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times
src/python/m5/objects/BaseCPU.py:
move system parameter out of fs to everyone
src/sim/sim_object.cc:
src/sim/sim_object.hh:
States are now running, draining, or drained. memory state information moved into system object
src/sim/system.cc:
src/sim/system.hh:
memory mode information now contained in system object
2802:babfc298ac86 Mon Jun 26 17:49:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> remove extern "C" from the functions we all from gdb. This isn't requried and trips up GDB sometimes when i thinks the extern
name should be mangled, but it isn't
2720:695250d6fa42 Mon Jun 12 17:53:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Merge fixes to make full system compile and run.

src/arch/alpha/linux/system.cc:
src/cpu/o3/alpha_cpu_impl.hh:
src/sim/system.cc:
Merge fixes.
2716:b9114064d77a Sun Jun 11 22:01:00 EDT 2006 Nathan Binkert <binkertn@umich.edu> Merge iceaxe.:/Volumes/work/research/m5/head
into iceaxe.:/Volumes/work/research/m5/merge

src/cpu/simple/base.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/python/m5/objects/System.py:
src/sim/system.cc:
src/sim/system.hh:
hand merge
2689:dbf969c18a65 Wed Jun 07 16:02:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Update copyright.
H A Dsyscall_emul.cc3669:3607aaed36b6 Thu Nov 16 03:43:00 EST 2006 Nathan Binkert <binkertn@umich.edu> Implement current working directory for LiveProcesses
3114:7a4771b9b720 Sun Sep 17 03:00:00 EDT 2006 Gabe Black <gblack@eecs.umich.edu> Finished changing how stat structures are translated, fixed the handling of various ids as LiveProcess parameters.

src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/process.hh:
src/arch/alpha/process.cc:
src/arch/alpha/process.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/process.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/linux/process.hh:
src/arch/mips/process.cc:
src/arch/mips/process.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/process.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/solaris/process.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
Changed Process to LiveProcess in syscall handlers and fixed the implementation of uid, euid, gid, egid, pid and ppid as LiveProcess parameters.
src/kern/tru64/tru64.hh:
Changed Process to LiveProcess in syscall handlers and fixed the implementation of uid, euid, gid, egid, pid and ppid as LiveProcess parameters. Also fit tru64 in with the new way to handle stat calls.
3112:76b70de314b6 Fri Sep 15 00:59:00 EDT 2006 Gabe Black <gblack@eecs.umich.edu> Merge zizzer.eecs.umich.edu:/bk/newmem
into ewok.(none):/home/gblack/m5/newmem
3079:13d9c24a7bba Mon Aug 28 10:39:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Add dup() support (from Antti Miettinen).
3071:12e952ddba98 Sun Sep 03 02:12:00 EDT 2006 Gabe Black <gblack@eecs.umich.edu> Made system calls use the uid, etc parameters from the live process.
2834:c8342a71404b Mon Jul 03 00:19:00 EDT 2006 Korey Sewell <ksewell@umich.edu> Fix for FS O3CPU compile ... missing forward class declaration/header file after files got split for ISA-independence

src/cpu/o3/alpha/thread_context.hh:
Use 'this' when accessing cpu
src/cpu/o3/cpu.hh:
add numActiveThreds function
src/cpu/o3/thread_context.hh:
forward class declarations
src/cpu/o3/thread_context_impl.hh:
add quiesce event header file
src/cpu/thread_context.hh:
add exit() function to thread context (read comments in file)
src/sim/syscall_emul.cc:
adjust exitFunc syscall
2708:c4157b162e7b Fri Jun 09 23:18:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Merge vm1.(none):/home/stever/bk/newmem
into vm1.(none):/home/stever/bk/newmem-py

src/python/m5/__init__.py:
src/sim/syscall_emul.cc:
Hand merge.
2707:ee2a3f82ac56 Fri Jun 09 18:39:00 EDT 2006 Korey Sewell <ksewell@umich.edu> Authorship stuff

src/sim/syscall_emul.cc:
Authorship Stuff
2687:9721a59675b8 Fri Jun 09 17:07:00 EDT 2006 Korey Sewell <ksewell@umich.edu> add fcntl64Func

use ThreadContext rename

src/arch/mips/isa/formats/branch.isa:
src/arch/mips/isa/formats/fp.isa:
src/arch/mips/isa/includes.isa:
Use ThreadContext
src/sim/syscall_emul.cc:
fcntl64 function using TC
src/sim/syscall_emul.hh:
Add fcntl64func
2680:246e7104f744 Tue Jun 06 17:32:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Change ExecContext to ThreadContext. This is being renamed to differentiate between the interface used objects outside of the CPU, and the interface used by the ISA. ThreadContext is used by objects outside of the CPU and is specifically defined in thread_context.hh. ExecContext is more implicit, and is defined by files such as base_dyn_inst.hh or cpu/simple/base.hh.

Further renames/reorganization will be coming shortly; what is currently CPUExecContext (the old ExecContext from m5) will be renamed to SimpleThread or something similar.

src/arch/alpha/arguments.cc:
src/arch/alpha/arguments.hh:
src/arch/alpha/ev5.cc:
src/arch/alpha/faults.cc:
src/arch/alpha/faults.hh:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/freebsd/system.hh:
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/linux/system.hh:
src/arch/alpha/linux/threadinfo.hh:
src/arch/alpha/process.cc:
src/arch/alpha/regfile.hh:
src/arch/alpha/stacktrace.cc:
src/arch/alpha/stacktrace.hh:
src/arch/alpha/tlb.cc:
src/arch/alpha/tlb.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/system.cc:
src/arch/alpha/tru64/system.hh:
src/arch/alpha/utility.hh:
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/process.cc:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/regfile/regfile.hh:
src/arch/mips/stacktrace.hh:
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/regfile.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/stacktrace.hh:
src/arch/sparc/ua2005.cc:
src/arch/sparc/utility.hh:
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
src/base/remote_gdb.cc:
src/base/remote_gdb.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/cpu_exec_context.cc:
src/cpu/cpu_exec_context.hh:
src/cpu/cpuevent.cc:
src/cpu/cpuevent.hh:
src/cpu/exetrace.hh:
src/cpu/intr_control.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/pc_event.cc:
src/cpu/pc_event.hh:
src/cpu/profile.cc:
src/cpu/profile.hh:
src/cpu/quiesce_event.cc:
src/cpu/quiesce_event.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
src/cpu/thread_state.hh:
src/dev/alpha_console.cc:
src/dev/ns_gige.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/linux/events.cc:
src/kern/linux/events.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/kern/tru64/dump_mbuf.cc:
src/kern/tru64/tru64.hh:
src/kern/tru64/tru64_events.cc:
src/kern/tru64/tru64_events.hh:
src/mem/vport.cc:
src/mem/vport.hh:
src/sim/faults.cc:
src/sim/faults.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
src/sim/system.cc:
src/cpu/thread_context.hh:
src/sim/system.hh:
src/sim/vptr.hh:
Change ExecContext to ThreadContext.
H A Dprocess.hh3669:3607aaed36b6 Thu Nov 16 03:43:00 EST 2006 Nathan Binkert <binkertn@umich.edu> Implement current working directory for LiveProcesses
3311:7eb47a60dbd4 Tue Oct 17 19:38:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> add code to serialize se structures. Lisa is working on the python side of things and will test

src/mem/page_table.cc:
src/mem/page_table.hh:
add code to serialize/unserialize page table
src/sim/process.cc:
src/sim/process.hh:
add code to serialize/unserialize process
3114:7a4771b9b720 Sun Sep 17 03:00:00 EDT 2006 Gabe Black <gblack@eecs.umich.edu> Finished changing how stat structures are translated, fixed the handling of various ids as LiveProcess parameters.

src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/process.hh:
src/arch/alpha/process.cc:
src/arch/alpha/process.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/process.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/linux/process.hh:
src/arch/mips/process.cc:
src/arch/mips/process.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/process.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/solaris/process.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
Changed Process to LiveProcess in syscall handlers and fixed the implementation of uid, euid, gid, egid, pid and ppid as LiveProcess parameters.
src/kern/tru64/tru64.hh:
Changed Process to LiveProcess in syscall handlers and fixed the implementation of uid, euid, gid, egid, pid and ppid as LiveProcess parameters. Also fit tru64 in with the new way to handle stat calls.
3066:254e37051d65 Sun Sep 03 02:04:00 EDT 2006 Gabe Black <gblack@eecs.umich.edu> Added uid, euid, gid, egid, pid and ppid parameters to a live process.
2715:4032e02b525e Sun Jun 11 21:49:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Move LiveProcess::create() from arch-specific files
bcak to main LiveProcess, then automatically select
ISA based on object file type. Now simulation scripts
no longer need to care about the ISA, as they can just
call LiveProcess().

configs/test/test.py:
Script no longer cares about ISA.
src/arch/alpha/process.cc:
src/arch/alpha/process.hh:
src/arch/mips/process.cc:
src/arch/mips/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/process.hh:
src/sim/process.cc:
src/sim/process.hh:
Move create() from arch-specific files back to
main LiveProcess, then automatically select ISA
based on object file type.
2683:d6b72bb2ed97 Wed Jun 07 15:29:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Reorganization/renaming of CPUExecContext. Now it is called SimpleThread in order to clear up the confusion due to the many ExecContexts. It also derives from a common ThreadState object, which holds various state common to threads across CPU models.

Following with the previous check-in, ExecContext now refers only to the interface provided to the ISA in order to access CPU state. ThreadContext refers to the interface provided to all objects outside the CPU in order to access thread state. SimpleThread provides all thread state and the interface to access it, and is suitable for simple execution models such as the SimpleCPU.

src/SConscript:
Include thread state file.
src/arch/alpha/ev5.cc:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/thread_context.hh:
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/cpu.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
Rename CPUExecContext to SimpleThread.
src/cpu/base_dyn_inst.hh:
Make thread member variables protected..
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/cpu.hh:
Make various members of ThreadState protected.
src/cpu/o3/alpha_cpu_impl.hh:
Push generation of TranslatingPort into the CPU itself.
Make various members of ThreadState protected.
src/cpu/o3/thread_state.hh:
Pull a lot of common code into the base ThreadState class.
src/cpu/ozone/thread_state.hh:
Rename CPUExecContext to SimpleThread, move a lot of common code into base ThreadState class.
src/cpu/thread_state.hh:
Push a lot of common code into base ThreadState class. This goes along with renaming CPUExecContext to SimpleThread, and making it derive from ThreadState.
src/cpu/simple_thread.cc:
Rename CPUExecContext to SimpleThread, make it derive from ThreadState. This helps push a lot of common code/state into a single class that can be used by all CPUs.
src/cpu/simple_thread.hh:
Rename CPUExecContext to SimpleThread, make it derive from ThreadState.
src/kern/system_events.cc:
Rename cpu_exec_context to thread_context.
src/sim/process.hh:
Remove unused forward declaration.
2680:246e7104f744 Tue Jun 06 17:32:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Change ExecContext to ThreadContext. This is being renamed to differentiate between the interface used objects outside of the CPU, and the interface used by the ISA. ThreadContext is used by objects outside of the CPU and is specifically defined in thread_context.hh. ExecContext is more implicit, and is defined by files such as base_dyn_inst.hh or cpu/simple/base.hh.

Further renames/reorganization will be coming shortly; what is currently CPUExecContext (the old ExecContext from m5) will be renamed to SimpleThread or something similar.

src/arch/alpha/arguments.cc:
src/arch/alpha/arguments.hh:
src/arch/alpha/ev5.cc:
src/arch/alpha/faults.cc:
src/arch/alpha/faults.hh:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/freebsd/system.hh:
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/linux/system.hh:
src/arch/alpha/linux/threadinfo.hh:
src/arch/alpha/process.cc:
src/arch/alpha/regfile.hh:
src/arch/alpha/stacktrace.cc:
src/arch/alpha/stacktrace.hh:
src/arch/alpha/tlb.cc:
src/arch/alpha/tlb.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/system.cc:
src/arch/alpha/tru64/system.hh:
src/arch/alpha/utility.hh:
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/process.cc:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/regfile/regfile.hh:
src/arch/mips/stacktrace.hh:
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/regfile.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/stacktrace.hh:
src/arch/sparc/ua2005.cc:
src/arch/sparc/utility.hh:
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
src/base/remote_gdb.cc:
src/base/remote_gdb.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/cpu_exec_context.cc:
src/cpu/cpu_exec_context.hh:
src/cpu/cpuevent.cc:
src/cpu/cpuevent.hh:
src/cpu/exetrace.hh:
src/cpu/intr_control.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/pc_event.cc:
src/cpu/pc_event.hh:
src/cpu/profile.cc:
src/cpu/profile.hh:
src/cpu/quiesce_event.cc:
src/cpu/quiesce_event.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
src/cpu/thread_state.hh:
src/dev/alpha_console.cc:
src/dev/ns_gige.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/linux/events.cc:
src/kern/linux/events.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/kern/tru64/dump_mbuf.cc:
src/kern/tru64/tru64.hh:
src/kern/tru64/tru64_events.cc:
src/kern/tru64/tru64_events.hh:
src/mem/vport.cc:
src/mem/vport.hh:
src/sim/faults.cc:
src/sim/faults.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
src/sim/system.cc:
src/cpu/thread_context.hh:
src/sim/system.hh:
src/sim/vptr.hh:
Change ExecContext to ThreadContext.
2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
2632:1bb2f91485ea Mon May 22 14:29:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.
/gem5/src/mem/cache/tags/
H A Dfa_lru.hh3862:ec47e4243107 Tue Dec 19 02:07:00 EST 2006 Steve Reinhardt <stever@eecs.umich.edu> Streamline Cache/Tags interface: get rid of redundant functions,
don't regenerate address from block in cache so that tags can
turn around and use address to look up block again.
3349:fec4a86fa212 Fri Oct 20 03:10:00 EDT 2006 Nathan Binkert <binkertn@umich.edu> Use PacketPtr everywhere
3315:f15ce6434ab0 Wed Oct 18 11:16:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Get rid of obsolete in-cache copy support.
2991:60cd98c72fd9 Tue Aug 15 16:21:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Pulled out changes to fix EIO programs with caches. Also fixes any translatingPort read/write Blob function problems with caches.

-Basically removed the ASID from places it is no longer needed due to PageTable

src/mem/cache/cache.hh:
src/mem/cache/cache_impl.hh:
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/miss/blocking_buffer.hh:
src/mem/cache/miss/miss_queue.cc:
src/mem/cache/miss/miss_queue.hh:
src/mem/cache/miss/mshr.cc:
src/mem/cache/miss/mshr.hh:
src/mem/cache/miss/mshr_queue.cc:
src/mem/cache/miss/mshr_queue.hh:
src/mem/cache/prefetch/base_prefetcher.cc:
src/mem/cache/prefetch/base_prefetcher.hh:
src/mem/cache/tags/fa_lru.cc:
src/mem/cache/tags/fa_lru.hh:
src/mem/cache/tags/iic.cc:
src/mem/cache/tags/iic.hh:
src/mem/cache/tags/lru.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/split.cc:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_lifo.cc:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.cc:
src/mem/cache/tags/split_lru.hh:
Remove asid where it wasn't neccesary anymore due to Page Table
2982:0ecdb0879b14 Mon Aug 14 19:25:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Fix up doxygen.
2814:b723c79f5349 Fri Jun 30 10:25:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> All files compile in the mem directory except cache_builder

Missing some functionality (like split caches and copy support)

src/SConscript:
Typo
src/mem/cache/prefetch/base_prefetcher.cc:
src/mem/cache/prefetch/ghb_prefetcher.hh:
src/mem/cache/prefetch/stride_prefetcher.hh:
src/mem/cache/prefetch/tagged_prefetcher_impl.hh:
src/mem/cache/tags/fa_lru.cc:
src/mem/cache/tags/fa_lru.hh:
src/mem/cache/tags/iic.cc:
src/mem/cache/tags/iic.hh:
src/mem/cache/tags/lru.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/split.cc:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_lifo.cc:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.cc:
src/mem/cache/tags/split_lru.hh:
src/mem/packet.hh:
src/mem/request.hh:
Fix so it compiles
2810:5befce12ad70 Wed Jun 28 11:02:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Was having difficulty with merging the cache, reverted to an early version and will add back in the patches to make it work soon.

src/mem/cache/prefetch/tagged_prefetcher_impl.hh:
Trying to merge
src/mem/cache/base_cache.cc:
src/mem/cache/base_cache.hh:
src/mem/cache/cache.cc:
src/mem/cache/cache.hh:
src/mem/cache/cache_blk.hh:
src/mem/cache/cache_builder.cc:
src/mem/cache/cache_impl.hh:
src/mem/cache/coherence/coherence_protocol.cc:
src/mem/cache/coherence/coherence_protocol.hh:
src/mem/cache/coherence/simple_coherence.hh:
src/mem/cache/coherence/uni_coherence.cc:
src/mem/cache/coherence/uni_coherence.hh:
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/miss/blocking_buffer.hh:
src/mem/cache/miss/miss_queue.cc:
src/mem/cache/miss/miss_queue.hh:
src/mem/cache/miss/mshr.cc:
src/mem/cache/miss/mshr.hh:
src/mem/cache/miss/mshr_queue.cc:
src/mem/cache/miss/mshr_queue.hh:
src/mem/cache/prefetch/base_prefetcher.cc:
src/mem/cache/prefetch/base_prefetcher.hh:
src/mem/cache/prefetch/ghb_prefetcher.cc:
src/mem/cache/prefetch/ghb_prefetcher.hh:
src/mem/cache/prefetch/stride_prefetcher.cc:
src/mem/cache/prefetch/stride_prefetcher.hh:
src/mem/cache/prefetch/tagged_prefetcher.hh:
src/mem/cache/tags/base_tags.cc:
src/mem/cache/tags/base_tags.hh:
src/mem/cache/tags/fa_lru.cc:
src/mem/cache/tags/fa_lru.hh:
src/mem/cache/tags/iic.cc:
src/mem/cache/tags/iic.hh:
src/mem/cache/tags/lru.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/repl/gen.cc:
src/mem/cache/tags/repl/gen.hh:
src/mem/cache/tags/repl/repl.cc:
src/mem/cache/tags/repl/repl.hh:
src/mem/cache/tags/split.cc:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_blk.hh:
src/mem/cache/tags/split_lifo.cc:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.cc:
src/mem/cache/tags/split_lru.hh:
Pulling an early version of the cache into the tree due to merging issues. Will apply patches and push.
/gem5/src/mem/
H A Dport.cc3348:11f6ef023158 Fri Oct 20 02:38:00 EDT 2006 Nathan Binkert <binkertn@umich.edu> refactor code for the packet, get rid of packet_impl.hh
and call it packet_access.hh and fix the #includes so
things compile right.
2982:0ecdb0879b14 Mon Aug 14 19:25:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Fix up doxygen.
2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
2663:c82193ae8467 Wed May 31 00:12:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Streamline interface to Request object.

src/SConscript:
mem/request.cc no longer needed (all functions inline).
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/timing.cc:
src/dev/io_device.cc:
src/mem/port.cc:
Modified Request object interface.
src/mem/packet.hh:
Modified Request object interface.
Address & size are always set together now, so track
with single flag.
src/mem/request.hh:
Streamline interface to support a handful of calls that set
multiple fields reflecting common usage patterns.
Reduce number of validFoo booleans by combining flags for fields
which must be set together.
2642:c162e0359b49 Fri May 26 14:24:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Add a little more tracing support for Bus/Port stuff.

src/base/traceflags.py:
Sort flags so you can find things.
Add BusAddrRanges flag for tracking RangeChange events
separately from general bus activity.
src/mem/bus.cc:
Add BusAddrRanges flag for tracking RangeChange events
separately from general bus activity.
src/mem/port.cc:
src/mem/port.hh:
Print Config trace message when peers are set up.
2641:6d9d837e2032 Fri May 26 14:17:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Significant rework of Packet class interface:
- new constructor guarantees initialization of most fields
- flags track status of non-guaranteed fields (addr, size, src)
- accessor functions (getAddr() etc.) check status on access
- Command & Result classes are nested in Packet class scope
- Command now built from vector of behavior bits
- string version of Command for tracing
- reinitFromRequest() and makeTimingResponse() encapsulate
common manipulations of existing packets

src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/timing.cc:
src/dev/alpha_console.cc:
src/dev/ide_ctrl.cc:
src/dev/io_device.cc:
src/dev/io_device.hh:
src/dev/isa_fake.cc:
src/dev/ns_gige.cc:
src/dev/pciconfigall.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/dev/tsunami_io.cc:
src/dev/tsunami_pchip.cc:
src/dev/uart8250.cc:
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/physical.cc:
src/mem/port.cc:
src/mem/port.hh:
src/mem/request.hh:
Update for new Packet interface.
2632:1bb2f91485ea Mon May 22 14:29:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.
H A Dbridge.cc3662:9dacf0926b69 Tue Nov 14 01:12:00 EST 2006 Ron Dreslinski <rdreslin@umich.edu> Update bus bridges now that snoop ranges are passed properly

src/mem/bridge.cc:
Update brdiges, now that snoop addresses are properly forwarded.
Bus bridge should only handle snoops on the second phase (SNOOP_COMMIT)
src/mem/bus.cc:
src/mem/bus.hh:
Make sure if a busBridge has access to both things that snoop and things that respond it only takes the request once
3349:fec4a86fa212 Fri Oct 20 03:10:00 EDT 2006 Nathan Binkert <binkertn@umich.edu> Use PacketPtr everywhere
3293:4ac3d9486d6e Fri Oct 13 15:47:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Fix for DMA's in FS caches.
Fix CSHR's for flow control.
Fix for Bus Bridges reusing packets (clean flags up)

Now both timing/atomic caches with MOESI in UP fail at same point.

src/dev/io_device.hh:
DMA's should send WriteInvalidates
src/mem/bridge.cc:
Reusing packet, clean flags in the packet set by bus.
src/mem/cache/base_cache.cc:
src/mem/cache/base_cache.hh:
src/mem/cache/cache.hh:
src/mem/cache/cache_impl.hh:
src/mem/cache/coherence/simple_coherence.hh:
src/mem/cache/coherence/uni_coherence.cc:
src/mem/cache/coherence/uni_coherence.hh:
Fix CSHR's for flow control.
src/mem/packet.hh:
Make a writeInvalidateResp, since the DMA expects responses to it's writes
2982:0ecdb0879b14 Mon Aug 14 19:25:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Fix up doxygen.
2738:5d7a31c7fa29 Tue Jun 13 23:19:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Move SimObject creation and Port connection loops
into Python.
Add Port and VectorPort objects and support for
specifying port connections via assignment.
The whole C++ ConfigNode hierarchy is gone now, as are
C++ Connector objects.

configs/test/fs.py:
configs/test/test.py:
Rewrite for new port connector syntax.
src/SConscript:
Remove unneeded files:
- mem/connector.*
- sim/config*
src/dev/io_device.hh:
src/mem/bridge.cc:
src/mem/bridge.hh:
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/mem_object.hh:
src/mem/physical.cc:
src/mem/physical.hh:
Allow getPort() to take an optional index to
support vector ports (eventually).
src/python/m5/__init__.py:
Move SimObject construction and port connection
operations into Python (with C++ calls).
src/python/m5/config.py:
Move SimObject construction and port connection
operations into Python (with C++ calls).
Add support for declaring and connecting MemObject
ports in Python.
src/python/m5/objects/Bus.py:
src/python/m5/objects/PhysicalMemory.py:
Add port declaration.
src/sim/builder.cc:
src/sim/builder.hh:
src/sim/serialize.cc:
src/sim/serialize.hh:
ConfigNodes are gone; builder just gets the
name of a .ini file section now.
src/sim/main.cc:
Move SimObject construction and port connection
operations into Python (with C++ calls).
Split remaining initialization operations into two parts,
loadIniFile() and finalInit().
src/sim/param.cc:
src/sim/param.hh:
SimObject resolution done globally in Python now
(not via ConfigNode hierarchy).
src/sim/sim_object.cc:
Remove unneeded #include.
2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
2657:b119b774656b Tue May 30 18:57:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since
it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
Removed Port Blocked/Unblocked and replaced with sendRetry().
Remove possibility of packet mangling if packet is going to be refused anyway in bridge

src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
src/dev/io_device.cc:
src/dev/io_device.hh:
Make DMA Timing requests/responses work.
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
src/mem/bridge.cc:
src/mem/bridge.hh:
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
Removed Port Blocked/Unblocked and replaced with sendRetry().
Remove posibility of packet mangling if packet is going to be refused anyway.
src/mem/bus.cc:
src/mem/bus.hh:
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since
it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then
src/mem/port.hh:
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method
2643:67ac7b611c56 Fri May 26 14:29:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Reorganize bridge as pair of cooperating ports.
Store original source & senderState for timing packets
that get a response, so we can properly route the
response packet back to the original sender.
2632:1bb2f91485ea Mon May 22 14:29:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.
/gem5/tests/configs/
H A Do3-timing-mp.py3402:db60546818d0 Tue Oct 31 14:33:00 EST 2006 Kevin Lim <ktlim@umich.edu> Remove mem parameter. Now the translating port asks the CPU's dcache's peer for its MemObject instead of having to have a paramter for the MemObject.

configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
3230:e86a03911728 Mon Oct 09 22:59:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Merge ktlim@zizzer:/bk/newmem
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem

src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/simple/timing.hh:
tests/configs/o3-timing-mp.py:
Hand merge.
3223:a2b6fa575c05 Sun Oct 08 01:12:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Clean up configs.

configs/common/FSConfig.py:
configs/common/SysPaths.py:
configs/example/fs.py:
configs/example/se.py:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
Clean up configs by removing FullO3Config and instead using default values.
src/python/m5/objects/FUPool.py:
Add in default FUPool.
src/python/m5/objects/O3CPU.py:
Use defaults better. Also set checker parameters, and fix up a config bug.
3200:4b072dcc7a57 Mon Oct 09 17:31:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Update configs for cpu_id

tests/configs/o3-timing-mp.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-timing-mp.py:
Update config for cpu_id
3134:cf578b0dd70d Thu Oct 05 21:10:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> First pass at snooping stuff that compiles and doesn't break.

Still need:
-Handle NACK's on the recieve side
-Distinguish top level caches
-Handle repsonses from caches failing the fast path
-Handle BusError and propogate it
-Fix the invalidate packet associated with snooping in the cache

src/mem/bus.cc:
Make sure to snoop on functional accesses
src/mem/cache/base_cache.cc:
Wait to make a request into a response until it is ready to be issued
src/mem/cache/base_cache.hh:
Support range changes for snoops
Set up snoop responses for cache->cache transfers
src/mem/cache/cache_impl.hh:
Only access the cache if it wasn't satisfied by cache->cache transfer
Handle snoop phases (detect block, then snoop)
Fix functional access to work properly (still need to fix snoop path for functional accesses)
H A Dtsunami-simple-timing-dual.py3402:db60546818d0 Tue Oct 31 14:33:00 EST 2006 Kevin Lim <ktlim@umich.edu> Remove mem parameter. Now the translating port asks the CPU's dcache's peer for its MemObject instead of having to have a paramter for the MemObject.

configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
3312:dbaec4804adf Wed Oct 18 00:15:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Enable MP systems via cmd-line flag in fs.py.

configs/example/fs.py:
Add flag for MP server systems.
src/python/m5/objects/AlphaConsole.py:
src/python/m5/objects/IntrControl.py:
Change CPU from 'any' to 'cpu[0]' to work better with MP sytems.
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-timing-dual.py:
Don't need to set console & intrcontrol cpu
params anymore (default is fixed now).
3170:37fd1e73f836 Sun Oct 08 13:53:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Implement Alpha LL/SC support for SimpleCPU (Atomic & Timing)
and PhysicalMemory. *No* support for caches or O3CPU.
Note that properly setting cpu_id on all CPUs is now required
for correct operation.

src/arch/SConscript:
src/base/traceflags.py:
src/cpu/base.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
src/python/m5/objects/BaseCPU.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
Implement Alpha LL/SC support for SimpleCPU (Atomic & Timing)
and PhysicalMemory. *No* support for caches or O3CPU.
3040:1fbdad0df45e Fri Aug 18 00:16:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Add caches in, fix cpu.mem param
3005:ceb86e85d62d Wed Aug 16 14:42:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Finish test clean-up & reorg.

configs/common/FSConfig.py:
Add default Machine() param
configs/example/fs.py:
configs/example/se.py:
make it work again
src/python/m5/objects/BaseCPU.py:
Make mem PhysicalMemory so that a Parent.any proxy works well
src/sim/process.cc:
Increase default stack size so we don't get an
'increasing stack' message on 'hello world'
tests/SConscript:
Add full list of current configs.
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
don't need SEConfig anymore
tests/quick/00.hello/test.py:
tests/quick/20.eio-short/test.py:
fix
tests/run.py:
move configs to separate dir
H A Dmemtest.py3341:82c51d920701 Thu Oct 19 21:26:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Fix corner case on assertion.
I need to move over to using the fixPacket function so I don't have to make the same changes everywhere.
Still a functional access bug someplace I need to track down in timing mode.

src/mem/cache/base_cache.cc:
src/mem/cache/cache_impl.hh:
Fix corner case on assertion
tests/configs/memtest.py:
Updated memtester with uncacheable addresses and functional accesses
3257:269df2f3bb2b Wed Oct 11 01:18:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Interesting memtest finally.
Get over 500,000 reads on each of 8 testers before memory leak becomes large.

tests/configs/memtest.py:
Update test to be more interesting
3208:97d9cc1e626f Tue Oct 10 01:32:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Fix several bugs pertaining to upgrades/mem leaks.

src/mem/cache/base_cache.cc:
Fix a bug about not having a request to send
src/mem/cache/base_cache.hh:
Fix a bug with the blocking code
src/mem/cache/cache.hh:
AFix a bug with snoop hits in WB buffer
src/mem/cache/cache_impl.hh:
Fix a bug with snoop hits in WB buffer
Also, add better DPRINTF's
src/mem/cache/miss/miss_queue.cc:
Fix a bug with upgrades (Need to clean it up later)
src/mem/cache/miss/mshr.cc:
Fix a memory leak bug, still some outstanding with writebacks not being deleted
src/mem/cache/miss/mshr_queue.cc:
Fix a bug about upgrades (need to clean up later)
src/mem/packet.hh:
Fix for newly added cmd attribute for upgrades
tests/configs/memtest.py:
More interesting testcase
3196:8eb90bc29df8 Mon Oct 09 17:13:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Make memtest work with 8 memtesters

src/mem/physical.cc:
Update comment to match memtest use
src/python/m5/objects/PhysicalMemory.py:
Make memtester have a way to connect functionally
tests/configs/memtest.py:
Properly create 8 memtesters and connect them to the memory system
3187:7eefad0aed11 Mon Oct 09 00:26:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Update the Memtester, commit a config file/test for it.

src/cpu/SConscript:
Add memtester to the compilation environment.
Someone who knows this better should make the MemTest a cpu model parameter.

For now attached with the build of o3 cpu.
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
Update Memtest for new mem system
src/python/m5/objects/MemTest.py:
Update memtest python description
H A Dsimple-atomic-mp.py3402:db60546818d0 Tue Oct 31 14:33:00 EST 2006 Kevin Lim <ktlim@umich.edu> Remove mem parameter. Now the translating port asks the CPU's dcache's peer for its MemObject instead of having to have a paramter for the MemObject.

configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
3200:4b072dcc7a57 Mon Oct 09 17:31:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Update configs for cpu_id

tests/configs/o3-timing-mp.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-timing-mp.py:
Update config for cpu_id
3134:cf578b0dd70d Thu Oct 05 21:10:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> First pass at snooping stuff that compiles and doesn't break.

Still need:
-Handle NACK's on the recieve side
-Distinguish top level caches
-Handle repsonses from caches failing the fast path
-Handle BusError and propogate it
-Fix the invalidate packet associated with snooping in the cache

src/mem/bus.cc:
Make sure to snoop on functional accesses
src/mem/cache/base_cache.cc:
Wait to make a request into a response until it is ready to be issued
src/mem/cache/base_cache.hh:
Support range changes for snoops
Set up snoop responses for cache->cache transfers
src/mem/cache/cache_impl.hh:
Only access the cache if it wasn't satisfied by cache->cache transfer
Handle snoop phases (detect block, then snoop)
Fix functional access to work properly (still need to fix snoop path for functional accesses)
H A Dsimple-timing-mp.py3402:db60546818d0 Tue Oct 31 14:33:00 EST 2006 Kevin Lim <ktlim@umich.edu> Remove mem parameter. Now the translating port asks the CPU's dcache's peer for its MemObject instead of having to have a paramter for the MemObject.

configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
3200:4b072dcc7a57 Mon Oct 09 17:31:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Update configs for cpu_id

tests/configs/o3-timing-mp.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-timing-mp.py:
Update config for cpu_id
3135:8e008e281579 Thu Oct 05 23:28:00 EDT 2006 Ron Dreslinski <rdreslin@umich.edu> Fixes for functional accesses to use the snoop path.
And small other tweaks to snooping coherence.

src/mem/cache/base_cache.hh:
Make timing response at the time of send.
src/mem/cache/cache.hh:
src/mem/cache/cache_impl.hh:
Update probe interface to be bi-directional for functional accesses
src/mem/packet.hh:
Add the function to create an atomic response to a given request
/gem5/src/arch/mips/
H A Dfaults.hh2935:d1223a6c9156 Sun Jul 23 13:39:00 EDT 2006 Korey Sewell <ksewell@umich.edu> This changeset gets the MIPS ISA pretty much working in the O3CPU. It builds, runs, and gets very very close to completing the hello world
succesfully but there are some minor quirks to iron out. Who would've known a DELAY SLOT introduces that much complexity?! arrgh!

Anyways, a lot of this stuff had to do with my project at MIPS and me needing to know how I was going to get this working for the MIPS
ISA. So I figured I would try to touch it up and throw it in here (I hate to introduce non-completely working components... )

src/arch/alpha/isa/mem.isa:
spacing
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
Gabe really authored this
src/arch/mips/isa/decoder.isa:
add StoreConditional Flag to instruction
src/arch/mips/isa/formats/basic.isa:
Steven really did this file
src/arch/mips/isa/formats/branch.isa:
fix bug for uncond/cond control
src/arch/mips/isa/formats/mem.isa:
Adjust O3CPU memory access to use new memory model interface.
src/arch/mips/isa/formats/util.isa:
update LoadStoreBase template
src/arch/mips/isa_traits.cc:
update SERIALIZE partially
src/arch/mips/process.cc:
src/arch/mips/process.hh:
no need for this for NOW. ASID/Virtual addressing handles it
src/arch/mips/regfile/misc_regfile.hh:
add in clear() function and comments for future usage of special misc. regs
src/cpu/base_dyn_inst.hh:
add in nextNPC variable and supporting functions.

add isCondDelaySlot function

Update predTaken and mispredicted functions
src/cpu/base_dyn_inst_impl.hh:
init nextNPC
src/cpu/o3/SConscript:
add MIPS files to compile
src/cpu/o3/alpha/thread_context.hh:
no need for my name on this file
src/cpu/o3/bpred_unit_impl.hh:
Update RAS appropriately for MIPS
src/cpu/o3/comm.hh:
add some extra communication variables to aid in handling the
delay slots
src/cpu/o3/commit.hh:
minor name fix for nextNPC functions.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rename_impl.hh:
Fix necessary variables and functions for squashes with delay slots
src/cpu/o3/cpu.cc:
Update function interface ...

adjust removeInstsNotInROB function to recognize delay slots insts
src/cpu/o3/cpu.hh:
update removeInstsNotInROB
src/cpu/o3/decode.hh:
declare necessary variables for handling delay slot
src/cpu/o3/dyn_inst.hh:
Add in MipsDynInst
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/rename.hh:
declare necessary variables and adjust functions for handling delay slot
src/cpu/o3/inst_queue.hh:
src/cpu/simple/base.cc:
no need for my name here
src/cpu/o3/isa_specific.hh:
add in MIPS files
src/cpu/o3/scoreboard.hh:
dont include alpha specific isa traits!
src/cpu/o3/thread_context.hh:
no need for my name here, i just rearranged where the file goes
src/cpu/static_inst.hh:
add isCondDelaySlot function
src/cpu/o3/mips/cpu.cc:
src/cpu/o3/mips/cpu.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/mips/dyn_inst.cc:
src/cpu/o3/mips/dyn_inst.hh:
src/cpu/o3/mips/dyn_inst_impl.hh:
src/cpu/o3/mips/impl.hh:
src/cpu/o3/mips/params.hh:
src/cpu/o3/mips/thread_context.cc:
src/cpu/o3/mips/thread_context.hh:
MIPS file for O3CPU...mirrors ALPHA definition
2800:18a615ca6e19 Mon Jun 26 16:49:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> add syscall emulation page table fault so we can allocate more stack pages

src/cpu/simple/base.cc:
add syscall emulation page table fault so we can allocate more stack pages
FaultBase::invoke will do this, we don't need to do it here
src/sim/faults.hh:
I have no idea why this #if was there... gone
src/sim/process.cc:
make stack_min actually be the current minimum
2680:246e7104f744 Tue Jun 06 17:32:00 EDT 2006 Kevin Lim <ktlim@umich.edu> Change ExecContext to ThreadContext. This is being renamed to differentiate between the interface used objects outside of the CPU, and the interface used by the ISA. ThreadContext is used by objects outside of the CPU and is specifically defined in thread_context.hh. ExecContext is more implicit, and is defined by files such as base_dyn_inst.hh or cpu/simple/base.hh.

Further renames/reorganization will be coming shortly; what is currently CPUExecContext (the old ExecContext from m5) will be renamed to SimpleThread or something similar.

src/arch/alpha/arguments.cc:
src/arch/alpha/arguments.hh:
src/arch/alpha/ev5.cc:
src/arch/alpha/faults.cc:
src/arch/alpha/faults.hh:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/freebsd/system.hh:
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/linux/system.hh:
src/arch/alpha/linux/threadinfo.hh:
src/arch/alpha/process.cc:
src/arch/alpha/regfile.hh:
src/arch/alpha/stacktrace.cc:
src/arch/alpha/stacktrace.hh:
src/arch/alpha/tlb.cc:
src/arch/alpha/tlb.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/system.cc:
src/arch/alpha/tru64/system.hh:
src/arch/alpha/utility.hh:
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/process.cc:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/regfile/regfile.hh:
src/arch/mips/stacktrace.hh:
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/regfile.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/stacktrace.hh:
src/arch/sparc/ua2005.cc:
src/arch/sparc/utility.hh:
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
src/base/remote_gdb.cc:
src/base/remote_gdb.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/cpu_exec_context.cc:
src/cpu/cpu_exec_context.hh:
src/cpu/cpuevent.cc:
src/cpu/cpuevent.hh:
src/cpu/exetrace.hh:
src/cpu/intr_control.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/pc_event.cc:
src/cpu/pc_event.hh:
src/cpu/profile.cc:
src/cpu/profile.hh:
src/cpu/quiesce_event.cc:
src/cpu/quiesce_event.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
src/cpu/thread_state.hh:
src/dev/alpha_console.cc:
src/dev/ns_gige.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/linux/events.cc:
src/kern/linux/events.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/kern/tru64/dump_mbuf.cc:
src/kern/tru64/tru64.hh:
src/kern/tru64/tru64_events.cc:
src/kern/tru64/tru64_events.hh:
src/mem/vport.cc:
src/mem/vport.hh:
src/sim/faults.cc:
src/sim/faults.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
src/sim/system.cc:
src/cpu/thread_context.hh:
src/sim/system.hh:
src/sim/vptr.hh:
Change ExecContext to ThreadContext.
2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
2632:1bb2f91485ea Mon May 22 14:29:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.
/gem5/src/base/loader/
H A Delf_object.cc3812:eaa215123a26 Thu Nov 30 15:51:00 EST 2006 Ali Saidi <saidi@eecs.umich.edu> Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it

configs/common/FSConfig.py:
We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
Let kernel be none
src/sim/system.cc:
Let the system kernel be none, but warn about it
2976:371224501196 Fri Aug 11 20:27:00 EDT 2006 Gabe Black <gblack@eecs.umich.edu> Added code to support setting up all of the auxillieary vectors configured by the sparc linux elf loader.

src/arch/sparc/process.cc:
All of the auxilliary vectors are now set like they are in the linux elf loader. This code should probably be moved to arch/sparc/linux/process.cc somehow.
2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
2634:db0b1133abd5 Mon May 22 21:51:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Clean up libelf handling.

SConstruct:
Clean up libelf handling. Required better handling of
per-build-root stuff in general (though libelf is the
only thing in that category currently).
src/SConscript:
No libelf-specific stuff in here anymore.
src/base/loader/elf_object.cc:
Just need to include gelf.h... it includes libelf.h.
2632:1bb2f91485ea Mon May 22 14:29:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.
/gem5/configs/common/
H A DFSConfig.py3823:1c8f87aa103e Wed Dec 06 14:29:00 EST 2006 Ali Saidi <saidi@eecs.umich.edu> Many more fixes for SPARC_FS. Gets us to the point where SOFTINT starts
getting touched.

configs/common/FSConfig.py:
Physical memory on the T1 starts at 1MB, The first megabyte is unmapped to catch bugs
src/arch/isa_parser.py:
we should readmiscregwitheffect not readmiscreg
src/arch/sparc/asi.cc:
Fix AsiIsNucleus spelling with respect to header file
Add ASI_LSU_CONTROL_REG to AsiSiMmu
src/arch/sparc/asi.hh:
Fix spelling of two ASIs
src/arch/sparc/isa/decoder.isa:
switch back to defaults letting the isa_parser insert readMiscRegWithEffect
src/arch/sparc/isa/formats/mem/util.isa:
Flesh out priviledgedString with hypervisor checks
Make load alternate set the flags correctly
src/arch/sparc/miscregfile.cc:
insert some forgotten break statements
src/arch/sparc/miscregfile.hh:
Add some comments to make it easier to find which misc register is which number
src/arch/sparc/tlb.cc:
flesh out the tlb memory mapped registers a lot more
src/base/traceflags.py:
add an IPR traceflag
src/mem/request.hh:
Fix a bad assert() in request
3814:33bd4ec9d66a Mon Dec 04 00:54:00 EST 2006 Ali Saidi <saidi@eecs.umich.edu> More changes to get SPARC fs closer. Now at 1.2M cycles before difference

configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
3812:eaa215123a26 Thu Nov 30 15:51:00 EST 2006 Ali Saidi <saidi@eecs.umich.edu> Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it

configs/common/FSConfig.py:
We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
Let kernel be none
src/sim/system.cc:
Let the system kernel be none, but warn about it
3751:b422ffec62c1 Wed Nov 22 23:09:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Added a parameter to set memory to zero. This is to support Legion, and once we can make our own hypervisor binary, we probably won't need it.
3745:70a265d01c87 Mon Nov 20 17:59:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Add in rom/rams for the nvram, hypervisor description, and partition description.
3743:2061715f68d1 Thu Nov 16 00:34:00 EST 2006 Gabe Black <gblack@eecs.umich.edu> Fixes for SPARC_FS

configs/common/FSConfig.py:
Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
Create a T1000 platform
src/arch/sparc/miscregfile.cc:
Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
Truncate an ExtMachInst to a MachInst before comparing with Legion.
3584:8c3cdb2c001c Thu Nov 09 18:22:00 EST 2006 Ali Saidi <saidi@eecs.umich.edu> Get SPARC to the point that it starts running. Add ability to load the ROM bin files, cleanup lockstep printing a bit
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.

SConstruct:
Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
add option to try raw when nothing works
src/cpu/exetrace.cc:
cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
change the instruction to be 32 bits because it is
src/mem/physical.cc:
fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
add the ability to add Addr() together
3449:97c98705ac4e Mon Oct 30 16:55:00 EST 2006 Lisa Hsu <hsul@eecs.umich.edu> FSConfig.py:
Accidentally committed this last time

configs/common/FSConfig.py:
Accidentally committed this last time
3448:bb2632fa57dc Mon Oct 30 16:51:00 EST 2006 Lisa Hsu <hsul@eecs.umich.edu> se.py, fs.py:
import Caches
Simulation.py:
Fix typo - L2Cache --> L1Cache

configs/common/Simulation.py:
Fix typo - L2Cache --> L1Cache
configs/example/fs.py:
configs/example/se.py:
import Caches
3304:c5917aeb8e2f Tue Oct 17 14:08:00 EDT 2006 Steve Reinhardt <stever@eecs.umich.edu> Rename 'Machine' to 'SysConfig'.
Clean up a little.

Completed in 401 milliseconds

<<21222324