cpu,mem: Add support for partial loads/stores and wide mem. accesses

This changeset adds support for partial (or masked) loads/stores, i.e.
loads/stores that can disable accesses to individual bytes within the
target address range. In addition, this changeset extends the code to
crack memory accesses across most CPU models (TimingSimpleCPU still
TBD), so that arbitrarily wide memory accesses are supported. These
changes are required for supporting ISAs with wide vectors.

Additional authors:
- Gabor Dozsa <gabor.dozsa@arm.com>
- Tiago Muck <tiago.muck@arm.com>

Change-Id: Ibad33541c258ad72925c0b1d5abc3e5e8bf92d92
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13518
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

arch: cpu: Track kernel stats using the base ISA agnostic type.

Then cast to the ISA specific type when necessary. This removes
(mostly) an ISA specific aspect to some of the interfaces. The ISA
specific version of the kernel stats still needs to be constructed and
stored in a few places which means that kernel_stats.hh still needs to
be a switching arch header, for instance.

In the future, I'd like to make the kernel its own object like the
Process objects in SE mode, and then it would be able to instantiate
and maintain its own stats.

Change-Id: I8309d49019124f6bea1482aaea5b5b34e8c97433
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18429
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

mem: Minimize the use of MemObject.

MemObject doesn't provide anything beyond its base ClockedObject any
more, so this change removes it from most inheritance hierarchies.
Occasionally MemObject is replaced with SimObject when I was fairly
confident that the extra functionality of ClockedObject wasn't needed.

Change-Id: Ic014ab61e56402e62548e8c831eb16e26523fdce
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18289
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu: Correctly account for executed instructions in simple cpus

Change-Id: I53f34b2d9db6e4d2e03dde42a970764bb2a5e701
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17730
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Added a probe to notify the address of retired instructions

A probe is added to notify the address of each retired instruction.

Change-Id: Iefc1b09d74b3aa0aa5773b17ba637bf51f5a59c9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17632
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: support atomic memory request type with AtomicOpFunctor

This patch enables all 4 CPU models (AtomicSimpleCPU, TimingSimpleCPU,
MinorCPU and DerivO3CPU) to issue atomic memory (AMO) requests to memory
system.

Atomic memory instruction is treated as a special store instruction in
all CPU models.

In simple CPUs, an AMO request with an associated AtomicOpFunctor is
simply sent to L1 dcache.

In MinorCPU, an AMO request bypasses store buffer and waits for any
conflicting store request(s) currently in the store buffer to retire
before the AMO request is sent to the cache. AMO requests are not buffered
in the store buffer, so their effects appear immediately in the cache.

In DerivO3CPU, an AMO request is inserted in the store buffer so that it
is delivered to the cache only after all previous stores are issued to
the cache. Data forwarding between between an outstanding AMO in the
store buffer and a subsequent load is not allowed since the AMO request
does not hold valid data until it's executed in the cache.

This implementation assumes that a target ISA implementation must insert
enough memory fences as micro-ops around an atomic instruction to
enforce a correct order of memory instructions with respect to its
memory consistency model. Without extra memory fences, this implementation
can allow AMOs and other memory instructions that do not conflict
(i.e., not target the same address) to reorder.

This implementation also assumes that atomic instructions execute within
a cache line boundary since the cache for now is not able to execute an
operation on two different cache lines in one single step. Therefore,
ISAs like x86 that require multi-cache-line atomic instructions need to
either use a pair of locking load and unlocking store or change the
cache implementation to guarantee the atomicity of an atomic
instruction.

Change-Id: Ib8a7c81868ac05b98d73afc7d16eb88486f8cf9a
Reviewed-on: https://gem5-review.googlesource.com/c/8188
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch: cpu: Rename *FloatRegBits* to *FloatReg*.

Now that there's no plain FloatReg, there's no reason to distinguish
FloatRegBits with a special suffix since it's the only way to read or
write FP registers.

Change-Id: I3a60168c1d4302aed55223ea8e37b421f21efded
Reviewed-on: https://gem5-review.googlesource.com/c/14460
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch, cpu: Remove float type accessors.

Use the binary accessors instead.

Change-Id: Iff1877e92c79df02b3d13635391a8c2f025776a2
Reviewed-on: https://gem5-review.googlesource.com/c/14457
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

misc: Using smart pointers for memory Requests

This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.

Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

misc: Substitute pointer to Request with aliased RequestPtr

Every usage of Request* in the code has been replaced with the
RequestPtr alias. This is a preparing patch for when RequestPtr will be
the typdefed to a smart pointer to Request rather then a raw pointer to
Request.

Change-Id: I73cbaf2d96ea9313a590cdc731a25662950cd51a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10995
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

arch,cpu: "virtualize" the TLB interface.

CPUs have historically instantiated the architecture specific version
of the TLBs to avoid a virtual function call, making them a little bit
more dependent on what the current ISA is. Some simple performance
measurement, the x86 twolf regression on the atomic CPU, shows that
there isn't actually any performance benefit, and if anything the
simulator goes slightly faster (although still within margin of error)
when the TLB functions are virtual.

This change switches everything outside of the architectures themselves
to use the generic BaseTLB type, and then inside the ISA for them to
cast that to their architecture specific type to call into architecture
specific interfaces.

The ARM TLB needed the most adjustment since it was using non-standard
translation function signatures. Specifically, they all took an extra
"type" parameter which defaulted to normal, and translateTiming
returned a Fault. translateTiming actually doesn't need to return a
Fault because everywhere that consumed it just stored it into a
structure which it then deleted(?), and the fault is stored in the
Translation object when the translation is done.

A little more work is needed to fully obviate the arch/tlb.hh header,
so the TheISA::TLB type is still visible outside of the ISAs.
Specifically, the TlbEntry type is used in the generic PageTable which
lives in src/mem.

Change-Id: I51b68ee74411f9af778317eff222f9349d2ed575
Reviewed-on: https://gem5-review.googlesource.com/6921
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

x86,misc: add additional info on faulting X86 instruction, fetched PC

Print faulting instruction for unmapped address panic in faults.cc
and print extra info about corresponding fetched PC in base.cc.

Change-Id: Id9e15d3e88df2ad6b809fb3cf9f6ae97e9e97e0f
Reviewed-on: https://gem5-review.googlesource.com/6461
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

misc: Rename misc.(hh|cc) to logging.(hh|cc)

These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).

Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu, cpu, sim: move Cycle probe update

Move the code responsible for performing the actual probe point notify
into BaseCPU. Use BaseCPU activateContext and suspendContext to keep
track of sleep cycles. Create a probe point (ppActiveCycles) that does
not count cycles where the processor was asleep. Rename ppCycles
to ppAllCycles to reflect its nature.

Change-Id: I1907ddd07d0ff9f2ef22cc9f61f5f46c630c9d66
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5762
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch: ISA parser additions of vector registers

Reiley's update :) of the isa parser definitions. My addition of the
vector element operand concept for the ISA parser. Nathanael's modification
creating a hierarchy between vector registers and its constituencies to the
isa parser.

Some fixes/updates on top to consider instructions as vectors instead of
floating when they use the VectorRF. Some counters added to all the
models to keep faithful counts.

Change-Id: Id8f162a525240dfd7ba884c5a4d9fa69f4050101
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2706
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Added interface for vector reg file

This patch adds some more functionality to the cpu model and the arch to
interface with the vector register file.

This change consists mainly of augmenting ThreadContexts and ExecContexts
with calls to get/set full vectors, underlying microarchitectural elements
or lanes. Those are meant to interface with the vector register file. All
classes that implement this interface also get an appropriate implementation.

This requires implementing the vector register file for the different
models using the VecRegContainer class.

This change set also updates the Result abstraction to contemplate the
possibility of having a vector as result.

The changes also affect how the remote_gdb connection works.

There are some (nasty) side effects, such as the need to define dummy
numPhysVecRegs parameter values for architectures that do not implement
vector extensions.

Nathanael Premillieu's work with an increasing number of fixes and
improvements of mine.

Change-Id: Iee65f4e8b03abfe1e94e6940a51b68d0977fd5bb
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues and CC reg free list initialisation ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2705

style: [patch 1/22] use /r/3648/ to reorganize includes

style: fix missing spaces in control statements

Result of running 'hg m5style --skip-all --fix-control -a'.

cpu,isa,mem: Add per-thread wakeup logic

Changes wakeup functionality so that only specific threads on SMT
capable cpus are woken.

isa,cpu: Add support for FS SMT Interrupts

Adds per-thread interrupt controllers and thread/context logic
so that interrupts properly get routed in SMT systems.

cpu: Add per-thread monitors

Adds per-thread address monitors to support FullSystem SMT.

config,cpu: Add SMT support to Atomic and Timing CPUs

Adds SMT support to the "simple" CPU models so that they can be
used with other SMT-supported CPUs. Example usage: this enables
the TimingSimpleCPU to be used to warmup caches before swapping to
detailed mode with the in-order or out-of-order based CPU models.

sim: Refactor the serialization base class

Objects that are can be serialized are supposed to inherit from the
Serializable class. This class is meant to provide a unified API for
such objects. However, so far it has mainly been used by SimObjects
due to some fundamental design limitations. This changeset redesigns
to the serialization interface to make it more generic and hide the
underlying checkpoint storage. Specifically:

* Add a set of APIs to serialize into a subsection of the current
object. Previously, objects that needed this functionality would
use ad-hoc solutions using nameOut() and section name
generation. In the new world, an object that implements the
interface has the methods serializeSection() and
unserializeSection() that serialize into a named /subsection/ of
the current object. Calling serialize() serializes an object into
the current section.

* Move the name() method from Serializable to SimObject as it is no
longer needed for serialization. The fully qualified section name
is generated by the main serialization code on the fly as objects
serialize sub-objects.

* Add a scoped ScopedCheckpointSection helper class. Some objects
need to serialize data structures, that are not deriving from
Serializable, into subsections. Previously, this was done using
nameOut() and manual section name generation. To simplify this,
this changeset introduces a ScopedCheckpointSection() helper
class. When this class is instantiated, it adds a new /subsection/
and subsequent serialization calls during the lifetime of this
helper class happen inside this section (or a subsection in case
of nested sections).

* The serialize() call is now const which prevents accidental state
manipulation during serialization. Objects that rely on modifying
state can use the serializeOld() call instead. The default
implementation simply calls serialize(). Note: The old-style calls
need to be explicitly called using the
serializeOld()/serializeSectionOld() style APIs. These are used by
default when serializing SimObjects.

* Both the input and output checkpoints now use their own named
types. This hides underlying checkpoint implementation from
objects that need checkpointing and makes it easier to change the
underlying checkpoint storage code.

arm: Fixes based on UBSan and static analysis

Another churn to clean up undefined behaviour, mostly ARM, but some
parts also touching the generic part of the code base.

Most of the fixes are simply ensuring that proper intialisation. One
of the more subtle changes is the return type of the sign-extension,
which is changed to uint64_t. This is to avoid shifting negative
values (undefined behaviour) in the ISA code.

x86 isa: This patch attempts an implementation at mwait.

Mwait works as follows:
1. A cpu monitors an address of interest (monitor instruction)
2. A cpu calls mwait - this loads the cache line into that cpu's cache.
3. The cpu goes to sleep.
4. When another processor requests write permission for the line, it is
evicted from the sleeping cpu's cache. This eviction is forwarded to the
sleeping cpu, which then wakes up.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>

cpu: Probe points for basic PMU stats

This changeset adds probe points that can be used to implement PMU
counters for CPU stats. The following probes are supported:

* BaseCPU::ppCycles / Cycles
* BaseCPU::ppRetiredInsts / RetiredInsts
* BaseCPU::ppRetiredLoads / RetiredLoads
* BaseCPU::ppRetiredStores / RetiredStores
* BaseCPU::ppRetiredBranches RetiredBranches

cpu: Remove unused deallocateContext calls

The call paths for de-scheduling a thread are halt() and suspend(), from
the thread context. There is no call to deallocateContext() in general,
though some CPUs chose to define it. This patch removes the function
from BaseCPU and the cores which do not require it.

arch: Pass faults by const reference where possible

This patch changes how faults are passed between methods in an attempt
to copy as few reference-counting pointer instances as possible. This
should avoid unecessary copies being created, contributing to the
increment/decrement of the reference counters.

cpu: add more instruction mix statistics

For the o3, add instruction mix (OpClass) histogram at commit (stats
also already collected at issue). For the simple CPUs we add a
histogram of executed instructions

cpu: simple: Add support for using branch predictors

This changesets adds branch predictor support to the
BaseSimpleCPU. The simple CPUs normally don't need a branch predictor,
however, there are at least two cases where it can be desirable:

1) A simple CPU can be used to warm the branch predictor of an O3
CPU before switching to the slower O3 model.

2) The simple CPU can be used as a quick way of evaluating/debugging
new branch predictors since it exposes branch predictor
statistics.

Limitations:
* Since the simple CPU doesn't speculate, only one instruction will
be active in the branch predictor at a time (i.e., the branch
predictor will never see speculative branches).

* The outcome of a branch prediction does not affect the performance
of the simple CPU.

cpu: add a condition-code register class

Add a third register class for condition codes,
in parallel with the integer and FP classes.
No ISAs use the CC class at this point though.

base simple cpu: removes commented out code about cache ops

x86: Changes to decoder, corrects 9376
The changes made by the changeset 9376 were not quite correct. The patch made
changes to the code which resulted in decoder not getting initialized correctly
when the state was restored from a checkpoint.

This patch adds a startup function to each ISA object. For x86, this function
sets the required state in the decoder. For other ISAs, the function is empty
right now.

cpu: Unify the serialization code for all of the CPU models

Cleanup the serialization code for the simple CPUs and the O3 CPU. The
CPU-specific code has been replaced with a (un)serializeThread that
serializes the thread state / context of a specific thread. Assuming
that the thread state class uses the CPU-specific thread state uses
the base thread state serialization code, this allows us to restore a
checkpoint with any of the CPU models.

arch: Make the ISA class inherit from SimObject

The ISA class on stores the contents of ID registers on many
architectures. In order to make reset values of such registers
configurable, we make the class inherit from SimObject, which allows
us to use the normal generated parameter headers.

This patch introduces a Python helper method, BaseCPU.createThreads(),
which creates a set of ISAs for each of the threads in an SMT
system. Although it is currently only needed when creating
multi-threaded CPUs, it should always be called before instantiating
the system as this is an obvious place to configure ID registers
identifying a thread/CPU.

Decoder: Remove the thread context get/set from the decoder.

This interface is no longer used, and getting rid of it simplifies the
decoders and code that sets up the decoders. The thread context had been used
to read architectural state which was used to contextualize the instruction
memory as it came in. That was changed so that the state is now sent to the
decoders to keep locally if/when it changes. That's significantly more
efficient.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>

AddrRange: Transition from Range<T> to AddrRange

This patch takes the final plunge and transitions from the templated
Range class to the more specific AddrRange. In doing so it changes the
obvious Range<Addr> to AddrRange, and also bumps the range_map to be
AddrRangeMap.

In addition to the obvious changes, including the removal of redundant
includes, this patch also does some house keeping in preparing for the
introduction of address interleaving support in the ranges. The Range
class is also stripped of all the functionality that is never used.

CPU: Merge the predecoder and decoder.

These classes are always used together, and merging them will give the ISAs
more flexibility in how they cache things and manage the process.

CPU: Tidy up some formatting and a DPRINTF in the simple CPU base class.

Put the { on the same line as the if and put a space between the if and the
open paren. Also, use the # format modifier which puts a 0x in front of hex
values automatically. If the ExtMachInst type isn't integral and actually
prints something more complicated, the # falls away harmlessly and we aren't
left with a phantom 0x followed by a bunch of unrelated text.

CheckerCPU: Make CheckerCPU runtime selectable instead of compile selectable

Enables the CheckerCPU to be selected at runtime with the --checker option
from the configs/example/fs.py and configs/example/se.py configuration
files. Also merges with the SE/FS changes.

cpu: add separate stats for insts/ops both globally and per cpu model

mem: Add a master ID to each request object.

This change adds a master id to each request object which can be
used identify every device in the system that is capable of issuing a request.
This is part of the way to removing the numCpus+1 stats in the cache and
replacing them with the master ids. This is one of a series of changes
that make way for the stats output to be changed to python.

SE/FS: Record the system pointer all the time for the simple CPU.

This pointer was only being stored in code that came from SE mode. The system
pointer is always meaningful and available, so it should always be stored.

Faults: Turn off arch/faults.hh

Because there are no longer architecture independent but specialized functions
in arch/XXX/faults.hh, code that isn't using the faults from a particular ISA
no longer needs to be able to include them through the switching header file
arch/faults.hh. By removing that header file (arch/faults.hh), the potential
interface between ISA code and non ISA code is narrowed.

Merge with head, hopefully the last time for this batch.

SE/FS: Get rid of FULL_SYSTEM in the CPU directory.

SE/FS: Get rid of uses of FULL_SYSTEM in Alpha.

SE/FS: Expose the same methods on the CPUs in SE and FS modes.

clang: Enable compiling gem5 using clang 2.9 and 3.0

This patch adds the necessary flags to the SConstruct and SConscript
files for compiling using clang 2.9 and later (on Ubuntu et al and OSX
XCode 4.2), and also cleans up a bunch of compiler warnings found by
clang. Most of the warnings are related to hidden virtual functions,
comparisons with unsigneds >= 0, and if-statements with empty
bodies. A number of mismatches between struct and class are also
fixed. clang 2.8 is not working as it has problems with class names
that occur in multiple namespaces (e.g. Statistics in
kernel_stats.hh).

clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which
causes confusion between the container std::set and the function
Packet::set, and this is currently addressed by not including the
entire namespace std, but rather selecting e.g. "using std::vector" in
the appropriate places.

CheckerCPU: Re-factor CheckerCPU to be compatible with current gem5

Brings the CheckerCPU back to life to allow FS and SE checking of the
O3CPU. These changes have only been tested with the ARM ISA. Other
ISAs potentially require modification.

Decode: Pull instruction decoding out of the StaticInst class into its own.

This change pulls the instruction decoding machinery (including caches) out of
the StaticInst class and puts it into its own class. This has a few intrinsic
benefits. First, the StaticInst code, which has gotten to be quite large, gets
simpler. Second, the code that handles decode caching is now separated out
into its own component and can be looked at in isolation, making it easier to
understand. I took the opportunity to restructure the code a bit which will
hopefully also help.

Beyond that, this change also lays some ground work for each ISA to have its
own, potentially stateful decode object. We'd be able to include less
contextualizing information in the ExtMachInst objects since that context
would be applied at the decoder. Also, the decoder could "know" ahead of time
that all the instructions it's going to see are going to be, for instance, 64
bit mode, and it will have one less thing to check when it decodes them.
Because the decode caching mechanism has been separated out, it's now possible
to have multiple caches which correspond to different types of decoding
context. Having one cache for each element of the cross product of different
configurations may become prohibitive, so it may be desirable to clear out the
cache when relatively static state changes and not to have one for each
setting.

Because the decode function is no longer universally accessible as a static
member of the StaticInst class, a new function was added to the ThreadContexts
that returns the applicable decode object.

trace: reimplement the DTRACE function so it doesn't use a vector
At the same time, rename the trace flags to debug flags since they
have broader usage than simply tracing. This means that
--trace-flags is now --debug-flags and --trace-help is now --debug-help

includes: sort all includes

mcpat: Adds McPAT performance counters

Updated patches from Rick Strong's set that modify performance counters for
McPAT

Replace curTick global variable with accessor functions.
This step makes it easy to replace the accessor functions
(which still access a global variable) with ones that access
per-thread curTick values.

ARM/Alpha/Cpu: Change prefetchs to be more like normal loads.

This change modifies the way prefetches work. They are now like normal loads
that don't writeback a register. Previously prefetches were supposed to call
prefetch() on the exection context, so they executed with execute() methods
instead of initiateAcc() completeAcc(). The prefetch() methods for all the CPUs
are blank, meaning that they get executed, but don't actually do anything.

On Alpha dead cache copy code was removed and prefetches are now normal ops.
They count as executed operations, but still don't do anything and IsMemRef is
not longer set on them.

On ARM IsDataPrefetch or IsInstructionPreftech is now set on all prefetch
instructions. The timing simple CPU doesn't try to do anything special for
prefetches now and they execute with the normal memory code path.

ISA,CPU,etc: Create an ISA defined PC type that abstracts out ISA behaviors.



This change is a low level and pervasive reorganization of how PCs are managed
in M5. Back when Alpha was the only ISA, there were only 2 PCs to worry about,
the PC and the NPC, and the lsb of the PC signaled whether or not you were in
PAL mode. As other ISAs were added, we had to add an NNPC, micro PC and next
micropc, x86 and ARM introduced variable length instruction sets, and ARM
started to keep track of mode bits in the PC. Each CPU model handled PCs in
its own custom way that needed to be updated individually to handle the new
dimensions of variability, or, in the case of ARMs mode-bit-in-the-pc hack,
the complexity could be hidden in the ISA at the ISA implementation's expense.
Areas like the branch predictor hadn't been updated to handle branch delay
slots or micropcs, and it turns out that had introduced a significant (10s of
percent) performance bug in SPARC and to a lesser extend MIPS. Rather than
perpetuate the problem by reworking O3 again to handle the PC features needed
by x86, this change was introduced to rework PC handling in a more modular,
transparent, and hopefully efficient way.


PC type:

Rather than having the superset of all possible elements of PC state declared
in each of the CPU models, each ISA defines its own PCState type which has
exactly the elements it needs. A cross product of canned PCState classes are
defined in the new "generic" ISA directory for ISAs with/without delay slots
and microcode. These are either typedef-ed or subclassed by each ISA. To read
or write this structure through a *Context, you use the new pcState() accessor
which reads or writes depending on whether it has an argument. If you just
want the address of the current or next instruction or the current micro PC,
you can get those through read-only accessors on either the PCState type or
the *Contexts. These are instAddr(), nextInstAddr(), and microPC(). Note the
move away from readPC. That name is ambiguous since it's not clear whether or
not it should be the actual address to fetch from, or if it should have extra
bits in it like the PAL mode bit. Each class is free to define its own
functions to get at whatever values it needs however it needs to to be used in
ISA specific code. Eventually Alpha's PAL mode bit could be moved out of the
PC and into a separate field like ARM.

These types can be reset to a particular pc (where npc = pc +
sizeof(MachInst), nnpc = npc + sizeof(MachInst), upc = 0, nupc = 1 as
appropriate), printed, serialized, and compared. There is a branching()
function which encapsulates code in the CPU models that checked if an
instruction branched or not. Exactly what that means in the context of branch
delay slots which can skip an instruction when not taken is ambiguous, and
ideally this function and its uses can be eliminated. PCStates also generally
know how to advance themselves in various ways depending on if they point at
an instruction, a microop, or the last microop of a macroop. More on that
later.

Ideally, accessing all the PCs at once when setting them will improve
performance of M5 even though more data needs to be moved around. This is
because often all the PCs need to be manipulated together, and by getting them
all at once you avoid multiple function calls. Also, the PCs of a particular
thread will have spatial locality in the cache. Previously they were grouped
by element in arrays which spread out accesses.


Advancing the PC:

The PCs were previously managed entirely by the CPU which had to know about PC
semantics, try to figure out which dimension to increment the PC in, what to
set NPC/NNPC, etc. These decisions are best left to the ISA in conjunction
with the PC type itself. Because most of the information about how to
increment the PC (mainly what type of instruction it refers to) is contained
in the instruction object, a new advancePC virtual function was added to the
StaticInst class. Subclasses provide an implementation that moves around the
right element of the PC with a minimal amount of decision making. In ISAs like
Alpha, the instructions always simply assign NPC to PC without having to worry
about micropcs, nnpcs, etc. The added cost of a virtual function call should
be outweighed by not having to figure out as much about what to do with the
PCs and mucking around with the extra elements.

One drawback of making the StaticInsts advance the PC is that you have to
actually have one to advance the PC. This would, superficially, seem to
require decoding an instruction before fetch could advance. This is, as far as
I can tell, realistic. fetch would advance through memory addresses, not PCs,
perhaps predicting new memory addresses using existing ones. More
sophisticated decisions about control flow would be made later on, after the
instruction was decoded, and handed back to fetch. If branching needs to
happen, some amount of decoding needs to happen to see that it's a branch,
what the target is, etc. This could get a little more complicated if that gets
done by the predecoder, but I'm choosing to ignore that for now.


Variable length instructions:

To handle variable length instructions in x86 and ARM, the predecoder now
takes in the current PC by reference to the getExtMachInst function. It can
modify the PC however it needs to (by setting NPC to be the PC + instruction
length, for instance). This could be improved since the CPU doesn't know if
the PC was modified and always has to write it back.


ISA parser:

To support the new API, all PC related operand types were removed from the
parser and replaced with a PCState type. There are two warts on this
implementation. First, as with all the other operand types, the PCState still
has to have a valid operand type even though it doesn't use it. Second, using
syntax like PCS.npc(target) doesn't work for two reasons, this looks like the
syntax for operand type overriding, and the parser can't figure out if you're
reading or writing. Instructions that use the PCS operand (which I've
consistently called it) need to first read it into a local variable,
manipulate it, and then write it back out.


Return address stack:

The return address stack needed a little extra help because, in the presence
of branch delay slots, it has to merge together elements of the return PC and
the call PC. To handle that, a buildRetPC utility function was added. There
are basically only two versions in all the ISAs, but it didn't seem short
enough to put into the generic ISA directory. Also, the branch predictor code
in O3 and InOrder were adjusted so that they always store the PC of the actual
call instruction in the RAS, not the next PC. If the call instruction is a
microop, the next PC refers to the next microop in the same macroop which is
probably not desirable. The buildRetPC function advances the PC intelligently
to the next macroop (in an ISA specific way) so that that case works.


Change in stats:

There were no change in stats except in MIPS and SPARC in the O3 model. MIPS
runs in about 9% fewer ticks. SPARC runs with 30%-50% fewer ticks, which could
likely be improved further by setting call/return instruction flags and taking
advantage of the RAS.


TODO:

Add != operators to the PCState classes, defined trivially to be !(a==b).
Smooth out places where PCs are split apart, passed around, and put back
together later. I think this might happen in SPARC's fault code. Add ISA
specific constructors that allow setting PC elements without calling a bunch
of accessors. Try to eliminate the need for the branching() function. Factor
out Alpha's PAL mode pc bit into a separate flag field, and eliminate places
where it's blindly masked out or tested in the PC.

CPU: Get rid of the now unnecessary getInst/setInst family of functions.

This code is no longer needed because of the preceeding change which adds a
StaticInstPtr parameter to the fault's invoke method, obviating the only use
for this pair of functions.

Faults: Pass the StaticInst involved, if any, to a Fault's invoke method.

Also move the "Fault" reference counted pointer type into a separate file,
sim/fault.hh. It would be better to name this less similarly to sim/faults.hh
to reduce confusion, but fault.hh matches the name of the type. We could change
Fault to FaultPtr to match other pointer types, and then changing the name of
the file would make more sense.

stats: get rid of the never-really-used event stuff

Minor remote GDB cleanup.
Expand the help text on the --remote-gdb-port option so
people know you can use it to disable remote gdb without
reading the source code, and thus don't waste any time
trying to add a separate option to do that.
Clean up some gdb-related cruft I found while looking
for where one would add a gdb disable option, before
I found the comment that told me that I didn't need
to do that.

ARM: Implement support for the IT instruction and the ITSTATE bits of CPSR.

CPU: Reset fetch offset after a exception

ARM: Make the predecoder handle Thumb instructions.

cpu: fix exec tracing memory corruption bug
Accessing traceData (to call setAddress() and/or setData())
after initiating a timing translation was causing crashes,
since a failed translation could delete the traceData
object before returning.

It turns out that there was never a need to access traceData
after initiating the translation, as the traced data was
always available earlier; this ordering was merely
historical. Furthermore, traceData->setAddress() and
traceData->setData() were being called both from the CPU
model and the ISA definition, often redundantly.

This patch standardizes all setAddress and setData calls
for memory instructions to be in the CPU models and not
in the ISA definition. It also moves those calls above
the translation calls to eliminate the crashes.

arch: nuke arch/isa_specific.hh and move stuff to generated config/the_isa.hh

Fix setting of INST_FETCH flag for O3 CPU.
It's still broken in inorder.
Also enhance DPRINTFs in cache and physical memory so we
can see more easily whether it's getting set or not.

Get rid of the unused get(Data|Inst)Asid and (inst|data)Asid functions.

types: clean up types, especially signed vs unsigned

types: add a type for thread IDs and try to use it everywhere

includes: sort includes again

types: Move stuff for global types into src/base/types.hh

request: rename INST_READ to INST_FETCH.

Get rid of the Unallocated thread context state.
Basically merge it in with Halted.
Also had to get rid of a few other functions that
called ThreadContext::deallocate(), including:
- InOrderCPU's setThreadRescheduleCondition.
- ThreadContext::exit(). This function was there to avoid terminating
simulation when one thread out of a multi-thread workload exits, but we
need to find a better (non-cpu-centric) way.

CPA: Add code to automatically record function symbols as CPU executes.

CPU: Implement translateTiming which defers to translateAtomic, and convert the timing simple CPU to use it.

ISA: Replace the translate functions in the TLBs with translateAtomic.

CPU: Get rid of translate... functions from various interface classes.

CPU: Don't always reset the micro pc on faults. Let the faults handle it.

X86: Make sure the predecoder is cleared out for interrupts.

cpu: provide a wakeup mechanism that can be used to pull CPUs out of sleep.
Make interrupts use the new wakeup method, and pull all of the interrupt
stuff into the cpu base class so that only the wakeup code needs to be updated.
I tried to make wakeup, wakeCPU, and the various other mechanisms for waking
and sleeping a little more sane, but I couldn't understand why the statistics
were changing the way they were. Maybe we'll try again some day.

Tracing: Make tracing aware of macro and micro ops.

style: Use the correct m5 style for things relating to interrupts.

CPU: Make the highest order bit in the micro pc determine if it's combinational or from the ROM.

Turn Interrupts objects into SimObjects. Also, move local APIC state into x86's Interrupts object.

params: Convert the CPU objects to use the auto generated param structs.
A whole bunch of stuff has been converted to use the new params stuff, but
the CPU wasn't one of them. While we're at it, make some things a bit
more stylish. Most of the work was done by Gabe, I just cleaned stuff up
a bit more at the end.

After a checkpoint (and thus a stats reset), the not_idle_fraction/notIdleFraction statistic is really wrong.
The notIdleFraction statistic isn't updated when the statistics reset, probably because the cpu Status information
was pulled into the atomic and timing cpus. This changeset pulls Status back into the BaseSimpleCPU object. Anyone
care to comment on the odd naming of the Status instance? It shouldn't just be status because that is confusing
with Port::Status, but _status seems a bit strage too.

CPU: move the PC Events code to a place where the code won't be executed multiple times if an instruction faults.

CPU: Update where the simple cpus read their cpu id from the thread context to init() to make sure they read the right value. This fixes a bug with multi-processor full-system configurations.

imported patch pagewalker.patch

Get MIPS simple regression working. Take out unecessary functions "setShadowSet", "CacheOp"

branch merge

X86: Work on the page table walker, TLB, and related faults.

Add in files from merge-bare-iron, get them compiling in FS and SE mode

CPU: Use the ThreadContext cpu id instead of the params cpu id in all cases.

Merge with head.

Predecoder: Clear out predecoder state on an ITLB fault.

CPU: Make the cpus check the pc event queues in SE mode.

X86: Get X86_FS to compile.

Simple CPU: Make sure only instructions which complete without faulting are counted.

Address Translation: Make SE mode use an actual TLB/MMU for translation like FS.

Turn the instruction tracing code into pluggable sim objects.
These need to be refined a little still and given parameters.

Major changes to how SimObjects are created and initialized. Almost all
creation and initialization now happens in python. Parameter objects
are generated and initialized by python. The .ini file is now solely for
debugging purposes and is not used in construction of the objects in any
way.

Make branches work by repopulating the predecoder every time through. This is probably fine as far as the predecoder goes, but the simple cpu might want to not refetch something it already has. That reintroduces the self modifying code problem though.

Modified instruction decode method.
Make code compatible with new decode method.

src/arch/alpha/remote_gdb.cc:
src/cpu/base_dyn_inst_impl.hh:
src/cpu/exetrace.cc:
src/cpu/simple/base.cc:
Make code compatible with new decode method.
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
Modified instruction decode method.

Seperate the pc-pc and the pc of the incoming bytes, and get rid of the "moreBytes" which just takes a MachInst.

src/arch/x86/predecoder.cc:
Seperate the pc-pc and the pc of the incoming bytes, and get rid of the "moreBytes" which just takes a MachInst. Also make the "opSize" field describe the number of bytes and not the log of the number of bytes.

Make microOp vs microop and macroOp vs macroop capitilization consistent.

src/arch/x86/isa/macroop.isa:
Make microOp vs microop and macroOp vs macroop capitilization consistent. Also fill out the emulation environment handling a little more, and use an object to pass around output code.
src/arch/x86/isa/microops/base.isa:
Make microOp vs microop and macroOp vs macroop capitilization consistent. Also adjust python to C++ bool translation.

don't be so aggressive with the tracing on #if

Don't mask the pc because the Alpha predecoder needs it to set the PAL mode bit in the ExtMachInst.

Merge zizzer:/bk/newmem
into zeep.pool:/z/saidi/work/m5.newmem

src/cpu/simple/base.cc:
hand merge vincent/gabe/my changes to cast sizeof() to a 64bit int

cast sizeof(MachInst) to Addr before generating a mask

Minor error. Forgotten to remove brackets for threadPC.

Merge zizzer.eecs.umich.edu:/bk/newmem
into ahchoo.blinky.homelinux.org:/home/gblack/m5/newmem-x86

src/cpu/simple/base.cc:
Hand merge

Assign traceData to be NULL at BaseSimpleCPU constructor.
Initialize a temporary variable for thread->readPC() at setupFetchRequest() to reduce function calls.
exec tracing isn't needed for m5.fast binaries
Moved MISCREG_GL, MISCREG_CWP, and MISCREG_TLB_DATA out of switch statement and use if blocks instead.

src/arch/sparc/miscregfile.cc:
Moved MISCREG_GL, MISCREG_CWP, and MISCREG_TLB_DATA out of switch statement and use if blocks instead.
src/cpu/simple/base.cc:
Assign traceData to be NULL at BaseSimpleCPU constructor.
Initialize a temporary variable for thread->readPC() at setupFetchRequest() to reduce function calls.
exec tracing isn't needed for m5.fast binaries

Merge zizzer.eecs.umich.edu:/bk/newmem
into doughnut.mwconnections.com:/home/gblack/m5/newmem-x86

Fixes for splash, may conflict with Korey's SMT work and doesn't support 03cpu yet.

src/cpu/simple/base.cc:
Cpu's should start as unallocated, not suspended
src/cpu/simple_thread.cc:
Wait for a thread to be assigned to activate the cpu
src/kern/tru64/tru64.hh:
When looking for a open cpu to assign threads, look for an unallocated one, not a suspended one.

Changes to make simple cpu handle pcs appropriately for x86

Use a computed mask to mask out the fetch address and not a hard coded one.

Make the itlb set the PHYSICAL flag on a request when it translates it. This gets it out of the cpu.

Fix ALPHA_FS compile. The MachInst -> StaticInstPtr constructor is no longer a conversion constructor because it caused ambiguous conversions when setting the pointer to NULL.

Merge zizzer.eecs.umich.edu:/bk/newmem
into ahchoo.blinky.homelinux.org:/home/gblack/m5/newmem-x86

src/arch/mips/utility.hh:
src/arch/x86/SConscript:
Hand merge

fix interrupting during a quisce on sparc

src/arch/sparc/ua2005.cc:
fix interrupting when quisced. Since sticks correspond to instructions when not quisced we need to
check if were suspended and interrupt at the guess time
src/base/traceflags.py:
add trace flag for Iob
src/cpu/simple/base.cc:
Use Quisce instead of IPI trace flag
src/dev/sparc/iob.cc:
add some Dprintfs

Make the predecoder an object with it's own switched header file. Start adding predecoding functionality to x86.

src/arch/SConscript:
src/arch/alpha/utility.hh:
src/arch/mips/utility.hh:
src/arch/sparc/utility.hh:
src/cpu/base.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/static_inst.hh:
src/arch/alpha/predecoder.hh:
src/arch/mips/predecoder.hh:
src/arch/sparc/predecoder.hh:
Make the predecoder an object with it's own switched header file.

Replaced makeExtMI with predecode.
Removed the getOpcode function from StaticInst which only made sense for Alpha.
Started implementing the x86 predecoder.

Add x86 version of call to "decode"

Clean up tracing stuff more, get rid of the trace log since
its not all that useful. Fix a few bugs with python/C++
integration.

Merge zizzer:/bk/newmem
into zed.eecs.umich.edu:/z/hsul/work/sparc/x86.m5

fix smul and sdiv to sign extend, and handle overflow/underflow corretly
Only allow writing/reading of 32 bits of Y
Only allow writing/reading 32 bits of pc when pstate.am
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
only erase a entry from the lookup table if it's valid
Put in a temporary check to make sure that lookup table and tlb array stay in sync
if we are interrupted in the middle of a mico-op, reset the micropc/nexpc
so we start on the first part of it when we come back

src/arch/sparc/isa/decoder.isa:
fix smul and sdiv to sign extend, and handle overflow/underflow corretly
Only allow writing/reading of 32 bits of Y
Only allow writing/reading 32 bits of pc when pstate.am
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
src/arch/sparc/isa/formats/mem/blockmem.isa:
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
src/arch/sparc/isa/includes.isa:
Use limits for 32bit underflow/overflow detection
src/arch/sparc/tlb.cc:
only erase a entry from the lookup table if it's valid
Put in a temporary check to make sure that lookup table and tlb array stay in sync
src/arch/sparc/tlb_map.hh:
add a print function to dump the tlb lookup table
src/cpu/simple/base.cc:
if we are interrupted in the middle of a mico-op, reset the micropc/nexpc
so we start on the first part of it when we come back

eliminate cpu checkInterrupts bool, it is redundant and unnecessary.

In the case that we generate a fault (e.g. a tlb miss) on a microcoded instruction set curMacroStaticInst to null
This way we'll jump immediately to the handler

Updates to support new interrupt processing and removal of PcPAL.

src/arch/alpha/interrupts.hh:
No need for this now that the ThreadContext is being used to set these IPRs in interrupts.
Also split up the interrupt checking from the updating of the IPL and interrupt summary.
src/arch/alpha/tlb.cc:
Check the PC for whether or not it's in PAL mode, not the addr.
src/cpu/o3/alpha/cpu.hh:
Split up getting the interrupt from actually processing the interrupt.
src/cpu/o3/alpha/cpu_impl.hh:
Splut up the processing of interrupts.
src/cpu/o3/commit_impl.hh:
Update for ISA-oriented interrupt changes.
src/cpu/o3/fetch_impl.hh:
Fix broken if statement from PcPAL updates, and properly populate the request fields.

Also more debugging output.
src/cpu/ozone/cpu_impl.hh:
Updates for ISA-oriented interrupt stuff.
src/cpu/ozone/front_end_impl.hh:
Populate request fields properly.
src/cpu/simple/base.cc:
Update for interrupt stuff.

Move the check to see if you're in user mode into the isa directory.

Put kernel_stats back into arch.

Only include kern/kernel_stats.hh if in full system. This was breaking MIPS_SE

Got rid of "inPalMode". Some places are still effectively checking if they are in PAL mode, however.

Add a new file which describes an ISA's interrupt handling mechanism. It records when interrupts are requested, and returns an interrupt to execute if the

Use ISA specific makeExtMI.

src/arch/alpha/utility.hh:
For now makeExtMI will be specific to the ISA.

Merge ktlim@zizzer:/bk/newmem
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

configs/example/fs.py:
configs/example/se.py:
src/mem/tport.hh:
Hand merge.

An attempt to serialize the state of the micro code mechanism in the simple cpu.

src/cpu/simple/base.cc:
Make a microcoded op start at the current micropc, rather than starting at 0.
src/cpu/thread_state.cc:
Serialize the microPC and nextMicroPC

This one really needs to be arch/faults.hh

Include the right version of faults.hh

Remove mem parameter. Now the translating port asks the CPU's dcache's peer for its MemObject instead of having to have a paramter for the MemObject.

configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.

Merge zizzer.eecs.umich.edu:/bk/newmem
into zeep.eecs.umich.edu:/home/gblack/m5/newmem

refactor code for the packet, get rid of packet_impl.hh
and call it packet_access.hh and fix the #includes so
things compile right.

Fix up microcode support.

src/arch/sparc/isa/formats/blockmem.isa:
Several small and medium bug fixes.
src/cpu/simple/base.cc:
Fixed a few compiler errors and made sure the next micro pc is set to 1 to prevent the first microop from executing twice. Also fixed a fetching bug.
src/cpu/thread_state.cc:
Made sure the microPC and nextMicroPC are initialized properly.

Started implementing microcode.

Merge zizzer.eecs.umich.edu:/bk/newmem
into zeep.eecs.umich.edu:/home/gblack/m5/newmem

src/cpu/ozone/cpu_impl.hh:
Hand merged

Merge ktlim@zamp:./local/clean/o3-merge/m5
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem

configs/boot/micro_memlat.rcS:
configs/boot/micro_tlblat.rcS:
src/arch/alpha/ev5.cc:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa_traits.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.hh:
src/cpu/checker/cpu_impl.hh:
src/cpu/o3/alpha/cpu_impl.hh:
src/cpu/o3/alpha/params.hh:
src/cpu/o3/checker_builder.cc:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/base.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.hh:
src/dev/ide_disk.cc:
src/python/m5/objects/O3CPU.py:
src/python/m5/objects/Root.py:
src/python/m5/objects/System.py:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/system.hh:
util/m5/m5.c:
Hand merge.

Changed makeExtMI to take a ThreadContext instead of a pc.

Merge zizzer.eecs.umich.edu:/bk/newmem
into ewok.(none):/home/gblack/m5/newmem

add ISA_HAS_DELAY_SLOT directive instead of "#if THE_ISA == ALPHA_ISA" throughout CPU models

src/arch/alpha/isa_traits.hh:
src/arch/mips/isa_traits.hh:
src/arch/sparc/isa_traits.hh:
define 'ISA_HAS_DELAY_SLOT'
src/cpu/base_dyn_inst.hh:
src/cpu/o3/bpred_unit_impl.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/simple/base.cc:
use ISA_HAS_DELAY_SLOT instead of THE_ISA == ALPHA_ISA

Change the cpu pointer in the InstRecord object to a thread context pointer.

Fixed ALPHA_FS by moving the remnants of isa_fullsys_traits.hh into arch/alpha/pagetable.hh and fixing up some includes

This changeset gets the MIPS ISA pretty much working in the O3CPU. It builds, runs, and gets very very close to completing the hello world
succesfully but there are some minor quirks to iron out. Who would've known a DELAY SLOT introduces that much complexity?! arrgh!

Anyways, a lot of this stuff had to do with my project at MIPS and me needing to know how I was going to get this working for the MIPS
ISA. So I figured I would try to touch it up and throw it in here (I hate to introduce non-completely working components... )

src/arch/alpha/isa/mem.isa:
spacing
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
Gabe really authored this
src/arch/mips/isa/decoder.isa:
add StoreConditional Flag to instruction
src/arch/mips/isa/formats/basic.isa:
Steven really did this file
src/arch/mips/isa/formats/branch.isa:
fix bug for uncond/cond control
src/arch/mips/isa/formats/mem.isa:
Adjust O3CPU memory access to use new memory model interface.
src/arch/mips/isa/formats/util.isa:
update LoadStoreBase template
src/arch/mips/isa_traits.cc:
update SERIALIZE partially
src/arch/mips/process.cc:
src/arch/mips/process.hh:
no need for this for NOW. ASID/Virtual addressing handles it
src/arch/mips/regfile/misc_regfile.hh:
add in clear() function and comments for future usage of special misc. regs
src/cpu/base_dyn_inst.hh:
add in nextNPC variable and supporting functions.

add isCondDelaySlot function

Update predTaken and mispredicted functions
src/cpu/base_dyn_inst_impl.hh:
init nextNPC
src/cpu/o3/SConscript:
add MIPS files to compile
src/cpu/o3/alpha/thread_context.hh:
no need for my name on this file
src/cpu/o3/bpred_unit_impl.hh:
Update RAS appropriately for MIPS
src/cpu/o3/comm.hh:
add some extra communication variables to aid in handling the
delay slots
src/cpu/o3/commit.hh:
minor name fix for nextNPC functions.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rename_impl.hh:
Fix necessary variables and functions for squashes with delay slots
src/cpu/o3/cpu.cc:
Update function interface ...

adjust removeInstsNotInROB function to recognize delay slots insts
src/cpu/o3/cpu.hh:
update removeInstsNotInROB
src/cpu/o3/decode.hh:
declare necessary variables for handling delay slot
src/cpu/o3/dyn_inst.hh:
Add in MipsDynInst
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/rename.hh:
declare necessary variables and adjust functions for handling delay slot
src/cpu/o3/inst_queue.hh:
src/cpu/simple/base.cc:
no need for my name here
src/cpu/o3/isa_specific.hh:
add in MIPS files
src/cpu/o3/scoreboard.hh:
dont include alpha specific isa traits!
src/cpu/o3/thread_context.hh:
no need for my name here, i just rearranged where the file goes
src/cpu/static_inst.hh:
add isCondDelaySlot function
src/cpu/o3/mips/cpu.cc:
src/cpu/o3/mips/cpu.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/mips/dyn_inst.cc:
src/cpu/o3/mips/dyn_inst.hh:
src/cpu/o3/mips/dyn_inst_impl.hh:
src/cpu/o3/mips/impl.hh:
src/cpu/o3/mips/params.hh:
src/cpu/o3/mips/thread_context.cc:
src/cpu/o3/mips/thread_context.hh:
MIPS file for O3CPU...mirrors ALPHA definition

Merge ktlim@zizzer:/bk/newmem
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

configs/test/fs.py:
configs/test/test.py:
SCCS merged

Updates for serialization. As long as the tickEvent doesn't need to be serialized (I don't believe it does because we drain all CPUs prior to checkpointing), it should be feasible to start up from other CPU's checkpoints.

src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/base.cc:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
Updates for serialization.

memory mode information now contained in system object
States are now running, draining, or drained. memory state information moved into system object
system parameter is not fs only for cpus
Implement drain() support in devices
Update for drain() call that returns number of times drain_event->process() will be called

Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine

src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
Since se mode has a system, allow access to it
Verify that the atomic cpu is connected to an atomic system on resume
src/cpu/simple/base.cc:
Since se mode has a system, allow access to it
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system
Since se mode has a system, allow access to it
Verify that the timing cpu is connected to an timing system on resume
src/dev/ide_disk.cc:
src/dev/io_device.cc:
src/dev/io_device.hh:
src/dev/ns_gige.cc:
src/dev/ns_gige.hh:
src/dev/pcidev.cc:
src/dev/pcidev.hh:
src/dev/sinic.cc:
src/dev/sinic.hh:
Implement drain() support in devices
src/python/m5/config.py:
Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times
src/python/m5/objects/BaseCPU.py:
move system parameter out of fs to everyone
src/sim/sim_object.cc:
src/sim/sim_object.hh:
States are now running, draining, or drained. memory state information moved into system object
src/sim/system.cc:
src/sim/system.hh:
memory mode information now contained in system object

Remove sampler and serializer. Now they are handled through C++ interacting with Python.

src/SConscript:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/checker/cpu.hh:
src/cpu/checker/cpu_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/sim/pseudo_inst.cc:
Remove sampler.
src/sim/sim_object.cc:
Remove serializer.

add syscall emulation page table fault so we can allocate more stack pages

src/cpu/simple/base.cc:
add syscall emulation page table fault so we can allocate more stack pages
FaultBase::invoke will do this, we don't need to do it here
src/sim/faults.hh:
I have no idea why this #if was there... gone
src/sim/process.cc:
make stack_min actually be the current minimum

Merge zizzer:/bk/newmem
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release

Edit Fetch DPRINT in simple CPU

src/arch/mips/isa/formats/mt.isa:
change copyright to 2006
src/cpu/simple/base.cc:
Only DPRINT NNPC if we are not using ALPHA
src/cpu/static_inst.hh:
Take Out MIPS Specific functions ...

Merge iceaxe.:/Volumes/work/research/m5/head
into iceaxe.:/Volumes/work/research/m5/merge

src/cpu/simple/base.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/python/m5/objects/System.py:
src/sim/system.cc:
src/sim/system.hh:
hand merge

Reorganization/renaming of CPUExecContext. Now it is called SimpleThread in order to clear up the confusion due to the many ExecContexts. It also derives from a common ThreadState object, which holds various state common to threads across CPU models.

Following with the previous check-in, ExecContext now refers only to the interface provided to the ISA in order to access CPU state. ThreadContext refers to the interface provided to all objects outside the CPU in order to access thread state. SimpleThread provides all thread state and the interface to access it, and is suitable for simple execution models such as the SimpleCPU.

src/SConscript:
Include thread state file.
src/arch/alpha/ev5.cc:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/thread_context.hh:
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/cpu.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
Rename CPUExecContext to SimpleThread.
src/cpu/base_dyn_inst.hh:
Make thread member variables protected..
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/cpu.hh:
Make various members of ThreadState protected.
src/cpu/o3/alpha_cpu_impl.hh:
Push generation of TranslatingPort into the CPU itself.
Make various members of ThreadState protected.
src/cpu/o3/thread_state.hh:
Pull a lot of common code into the base ThreadState class.
src/cpu/ozone/thread_state.hh:
Rename CPUExecContext to SimpleThread, move a lot of common code into base ThreadState class.
src/cpu/thread_state.hh:
Push a lot of common code into base ThreadState class. This goes along with renaming CPUExecContext to SimpleThread, and making it derive from ThreadState.
src/cpu/simple_thread.cc:
Rename CPUExecContext to SimpleThread, make it derive from ThreadState. This helps push a lot of common code/state into a single class that can be used by all CPUs.
src/cpu/simple_thread.hh:
Rename CPUExecContext to SimpleThread, make it derive from ThreadState.
src/kern/system_events.cc:
Rename cpu_exec_context to thread_context.
src/sim/process.hh:
Remove unused forward declaration.

Change ExecContext to ThreadContext. This is being renamed to differentiate between the interface used objects outside of the CPU, and the interface used by the ISA. ThreadContext is used by objects outside of the CPU and is specifically defined in thread_context.hh. ExecContext is more implicit, and is defined by files such as base_dyn_inst.hh or cpu/simple/base.hh.

Further renames/reorganization will be coming shortly; what is currently CPUExecContext (the old ExecContext from m5) will be renamed to SimpleThread or something similar.

src/arch/alpha/arguments.cc:
src/arch/alpha/arguments.hh:
src/arch/alpha/ev5.cc:
src/arch/alpha/faults.cc:
src/arch/alpha/faults.hh:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/freebsd/system.hh:
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/linux/system.hh:
src/arch/alpha/linux/threadinfo.hh:
src/arch/alpha/process.cc:
src/arch/alpha/regfile.hh:
src/arch/alpha/stacktrace.cc:
src/arch/alpha/stacktrace.hh:
src/arch/alpha/tlb.cc:
src/arch/alpha/tlb.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/system.cc:
src/arch/alpha/tru64/system.hh:
src/arch/alpha/utility.hh:
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/process.cc:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/regfile/regfile.hh:
src/arch/mips/stacktrace.hh:
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/regfile.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/stacktrace.hh:
src/arch/sparc/ua2005.cc:
src/arch/sparc/utility.hh:
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
src/base/remote_gdb.cc:
src/base/remote_gdb.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/cpu_exec_context.cc:
src/cpu/cpu_exec_context.hh:
src/cpu/cpuevent.cc:
src/cpu/cpuevent.hh:
src/cpu/exetrace.hh:
src/cpu/intr_control.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/pc_event.cc:
src/cpu/pc_event.hh:
src/cpu/profile.cc:
src/cpu/profile.hh:
src/cpu/quiesce_event.cc:
src/cpu/quiesce_event.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
src/cpu/thread_state.hh:
src/dev/alpha_console.cc:
src/dev/ns_gige.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/linux/events.cc:
src/kern/linux/events.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/kern/tru64/dump_mbuf.cc:
src/kern/tru64/tru64.hh:
src/kern/tru64/tru64_events.cc:
src/kern/tru64/tru64_events.hh:
src/mem/vport.cc:
src/mem/vport.hh:
src/sim/faults.cc:
src/sim/faults.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
src/sim/system.cc:
src/cpu/thread_context.hh:
src/sim/system.hh:
src/sim/vptr.hh:
Change ExecContext to ThreadContext.

Fixes to get everything working again.

src/cpu/simple/base.cc:
Start XC's as suspended.

Fix for full system compiling.

Updated Authors from bk prs info

Streamline interface to Request object.

src/SConscript:
mem/request.cc no longer needed (all functions inline).
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/timing.cc:
src/dev/io_device.cc:
src/mem/port.cc:
Modified Request object interface.
src/mem/packet.hh:
Modified Request object interface.
Address & size are always set together now, so track
with single flag.
src/mem/request.hh:
Streamline interface to support a handful of calls that set
multiple fields reflecting common usage patterns.
Reduce number of validFoo booleans by combining flags for fields
which must be set together.

Minor further cleanup & commenting of Packet class.

src/cpu/simple/atomic.cc:
Make common ifetch setup based on Request rather than Packet.
Packet::reset() no longer a separate function.
sendAtomic() returns latency, not absolute tick.
src/cpu/simple/atomic.hh:
sendAtomic returns latency, not absolute tick.
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
Make common ifetch setup based on Request rather than Packet.
src/dev/alpha_console.cc:
src/dev/ide_ctrl.cc:
src/dev/io_device.cc:
src/dev/isa_fake.cc:
src/dev/ns_gige.cc:
src/dev/pciconfigall.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/dev/tsunami_io.cc:
src/dev/tsunami_pchip.cc:
src/dev/uart8250.cc:
src/mem/physical.cc:
Get rid of redundant Packet time field.
src/mem/packet.cc:
Eliminate reset() method.
src/mem/packet.hh:
Fold reset() function into reinitFromRequest()... it was
only ever called together with that function.
Get rid of redundant time field.
Cleanup/add comments.
src/mem/port.hh:
Document in comment that sendAtomic returns latency, not absolute tick.

Fixes for TimingSimpleCPU under full system. Now boots Alpha Linux!

src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
Move traceData->finalize() into postExecute().
src/cpu/simple/timing.cc:
Fixes for full system. Now boots Alpha Linux!
- Handle ifetch faults, suspend/resume.
- Delete memory request & packet objects on response.
- Don't try to do split memory accesses on prefetch references
(ISA description doesn't support this).
src/cpu/simple/timing.hh:
Minor reorganization of internal methods.

Significant rework of Packet class interface:
- new constructor guarantees initialization of most fields
- flags track status of non-guaranteed fields (addr, size, src)
- accessor functions (getAddr() etc.) check status on access
- Command & Result classes are nested in Packet class scope
- Command now built from vector of behavior bits
- string version of Command for tracing
- reinitFromRequest() and makeTimingResponse() encapsulate
common manipulations of existing packets

src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/timing.cc:
src/dev/alpha_console.cc:
src/dev/ide_ctrl.cc:
src/dev/io_device.cc:
src/dev/io_device.hh:
src/dev/isa_fake.cc:
src/dev/ns_gige.cc:
src/dev/pciconfigall.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/dev/tsunami_io.cc:
src/dev/tsunami_pchip.cc:
src/dev/uart8250.cc:
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/physical.cc:
src/mem/port.cc:
src/mem/port.hh:
src/mem/request.hh:
Update for new Packet interface.

New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.