cpu: Make get(Data|Inst)Port return a Port and not a MasterPort.

No caller uses any of the MasterPort specific properties of these
function's return values, so we can instead return a reference to the
base Port class. This makes it possible for the data and inst ports
to be of any port type, not just gem5 style MasterPorts. This makes
life simpler for, for example, systemc based CPUs which might have TLM
ports.

It also makes it possible for any two CPUs which have compatible ports
to be switched between, as long as the ports they use support being
unbound. Unfortunately that does not include TLM or systemc ports which
are bound permanently.

Change-Id: I98fce5a16d2ef1af051238e929dd96d57a4ac838
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20240
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu, mem: Add new getSendFunctional method to the base CPU.

This returns a sendFunctional delegate references which can be used
to send functional accesses directly, or more likely when constructing
a PortProxy subclass. In those cases only the functional capabilities
of those ports are needed so there's no reason to require a full port
which supports all three protocols. Also, this removes the last
remaining use of get(Data|Inst)Port which relies on those returning
a port which supports the gem5 protocols, except the default
implementations of this new function. If a CPU doesn't have
traditional gem5 style ports, it can override this function to
do whatever other behavior is necessary and return its real ports
through get(Data|Inst)Port.

Change-Id: Ide4da81e3bc679662cd85902ba6bd537cce54a53
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20237
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu: Added correct return type for ROB::countInsts

- return size_t (unsigned) according to the .size() return type
- fixed typo in doc (source of warning with some compilers)

Change-Id: I48ee2e317cf41011a6fcb5ca45aef67e75329bfa
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18948
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu,mem: Add support for partial loads/stores and wide mem. accesses

This changeset adds support for partial (or masked) loads/stores, i.e.
loads/stores that can disable accesses to individual bytes within the
target address range. In addition, this changeset extends the code to
crack memory accesses across most CPU models (TimingSimpleCPU still
TBD), so that arbitrarily wide memory accesses are supported. These
changes are required for supporting ISAs with wide vectors.

Additional authors:
- Gabor Dozsa <gabor.dozsa@arm.com>
- Tiago Muck <tiago.muck@arm.com>

Change-Id: Ibad33541c258ad72925c0b1d5abc3e5e8bf92d92
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13518
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem: Minimize the use of MemObject.

MemObject doesn't provide anything beyond its base ClockedObject any
more, so this change removes it from most inheritance hierarchies.
Occasionally MemObject is replaced with SimObject when I was fairly
confident that the extra functionality of ClockedObject wasn't needed.

Change-Id: Ic014ab61e56402e62548e8c831eb16e26523fdce
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18289
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu: Added a probe to notify the address of retired instructions

A probe is added to notify the address of each retired instruction.

Change-Id: Iefc1b09d74b3aa0aa5773b17ba637bf51f5a59c9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17632
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, cpu, dev, gpu, mem, sim, python: start using getPort.

Replace the getMasterPort, getSlavePort, and getEthPort functions
with getPort, and remove extraneous mechanisms that are no longer
necessary.

Change-Id: Iab7e3c02d2f3a0cf33e7e824e18c28646b5bc318
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17040
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch,cpu: "virtualize" the TLB interface.

CPUs have historically instantiated the architecture specific version
of the TLBs to avoid a virtual function call, making them a little bit
more dependent on what the current ISA is. Some simple performance
measurement, the x86 twolf regression on the atomic CPU, shows that
there isn't actually any performance benefit, and if anything the
simulator goes slightly faster (although still within margin of error)
when the TLB functions are virtual.

This change switches everything outside of the architectures themselves
to use the generic BaseTLB type, and then inside the ISA for them to
cast that to their architecture specific type to call into architecture
specific interfaces.

The ARM TLB needed the most adjustment since it was using non-standard
translation function signatures. Specifically, they all took an extra
"type" parameter which defaulted to normal, and translateTiming
returned a Fault. translateTiming actually doesn't need to return a
Fault because everywhere that consumed it just stored it into a
structure which it then deleted(?), and the fault is stored in the
Translation object when the translation is done.

A little more work is needed to fully obviate the arch/tlb.hh header,
so the TheISA::TLB type is still visible outside of the ISAs.
Specifically, the TlbEntry type is used in the generic PageTable which
lives in src/mem.

Change-Id: I51b68ee74411f9af778317eff222f9349d2ed575
Reviewed-on: https://gem5-review.googlesource.com/6921
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

cpu, cpu, sim: move Cycle probe update

Move the code responsible for performing the actual probe point notify
into BaseCPU. Use BaseCPU activateContext and suspendContext to keep
track of sleep cycles. Create a probe point (ppActiveCycles) that does
not count cycles where the processor was asleep. Rename ppCycles
to ppAllCycles to reflect its nature.

Change-Id: I1907ddd07d0ff9f2ef22cc9f61f5f46c630c9d66
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5762
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

cpu: Make automatic transition to OFF optional

Add the power_gating_on_idle option to control whether a core
automatically enters the power gated state. The default behaviour is
to transition to clock gated when idle, but not to power gated. When
this option is set to true, the core automatically transitions to the
power gated state after a configurable latency.

Change-Id: Ida98c7fc532de4140d0e511c25613769b47b3702
Reviewed-on: https://gem5-review.googlesource.com/5741
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

pwr: Adds logic to enter power gating for the cpu model

If the CPU has been clock gated for a sufficient amount of time
(configurable via pwrGatingLatency), the CPU will go into the OFF
power state. This does not model hardware, just behaviour.

Change-Id: Ib3681d1ffa6ad25eba60f47b4020325f63472d43
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3969
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Refactor some Event subclasses to lambdas

Change-Id: If765c6100d67556f157e4e61aa33c2b7eeb8d2f0
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3923
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu, sim: Add param to force CPUs to wait for GDB

By setting the BaseCPU parameter wait_for_dbg_connection, the GDB
server blocks during initialisation waiting for the remote debugger to
connect before starting the simulated CPU.

Change-Id: I4d62c68ce9adf69344bccbb44f66e30b33715a1c
[ Update info message to include remote GDB port, rename param. ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3963
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>

syscall_emul: [patch 13/22] add system call retry capability

This changeset adds functionality that allows system calls to retry without
affecting thread context state such as the program counter or register values
for the associated thread context (when system calls return with a retry
fault).

This functionality is needed to solve problems with blocking system calls
in multi-process or multi-threaded simulations where information is passed
between processes/threads. Blocking system calls can cause deadlock because
the simulator itself is single threaded. There is only a single thread
servicing the event queue which can cause deadlock if the thread hits a
blocking system call instruction.

To illustrate the problem, consider two processes using the producer/consumer
sharing model. The processes can use file descriptors and the read and write
calls to pass information to one another. If the consumer calls the blocking
read system call before the producer has produced anything, the call will
block the event queue (while executing the system call instruction) and
deadlock the simulation.

The solution implemented in this changeset is to recognize that the system
calls will block and then generate a special retry fault. The fault will
be sent back up through the function call chain until it is exposed to the
cpu model's pipeline where the fault becomes visible. The fault will trigger
the cpu model to replay the instruction at a future tick where the call has
a chance to succeed without actually going into a blocking state.

In subsequent patches, we recognize that a syscall will block by calling a
non-blocking poll (from inside the system call implementation) and checking
for events. When events show up during the poll, it signifies that the call
would not have blocked and the syscall is allowed to proceed (calling an
underlying host system call if necessary). If no events are returned from the
poll, we generate the fault and try the instruction for the thread context
at a distant tick. Note that retrying every tick is not efficient.

As an aside, the simulator has some multi-threading support for the event
queue, but it is not used by default and needs work. Even if the event queue
was completely multi-threaded, meaning that there is a hardware thread on
the host servicing a single simulator thread contexts with a 1:1 mapping
between them, it's still possible to run into deadlock due to the event queue
barriers on quantum boundaries. The solution of replaying at a later tick
is the simplest solution and solves the problem generally.

pwr: Low-power idle power state for idle CPUs

Add functionality to the BaseCPU that will put the entire CPU
into a low-power idle state whenever all threads in it are idle.

Change-Id: I984d1656eb0a4863c87ceacd773d2d10de5cfd2b

mem: Remove threadId from memory request class

In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.

This is a re-spin of 20264eb after the revert (bd1c6789) and includes
some fixes of that commit.

Revert power patch sets with unexpected interactions

The following patches had unexpected interactions with the current
upstream code and have been reverted for now:

e07fd01651f3: power: Add support for power models
831c7f2f9e39: power: Low-power idle power state for idle CPUs
4f749e00b667: power: Add power states to ClockedObject

Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>

mem: Remove threadId from memory request class

In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.

power: Low-power idle power state for idle CPUs

Add functionality to the BaseCPU that will put the entire CPU into a low-power
idle state whenever all threads in it are idle.

cpu: Query CPU for inst executed from Python

This patch adds the ability for the simulator to query the number of
instructions a CPU has executed so far per hw-thread. This can be used
to enable more flexible periodic events such as taking checkpoints
starting 1s into simulation and X instructions thereafter.

misc: Add explicit overrides and fix other clang >= 3.5 issues

This patch adds explicit overrides as this is now required when using
"-Wall" with clang >= 3.5, the latter now part of the most recent
XCode. The patch consequently removes "virtual" for those methods
where "override" is added. The latter should be enough of an
indication.

As part of this patch, a few minor issues that clang >= 3.5 complains
about are also resolved (unused methods and variables).

misc: Remove redundant compiler-specific defines

This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap
(and similar) abstractions, as these are no longer needed with gcc 4.7
and clang 3.1 as minimum compiler versions.

cpu,isa,mem: Add per-thread wakeup logic

Changes wakeup functionality so that only specific threads on SMT
capable cpus are woken.

isa,cpu: Add support for FS SMT Interrupts

Adds per-thread interrupt controllers and thread/context logic
so that interrupts properly get routed in SMT systems.

cpu: Add per-thread monitors

Adds per-thread address monitors to support FullSystem SMT.

cpu: Move invldPid constant from Request to BaseCPU

A more natural home for this constant.

sim: Refactor the serialization base class

Objects that are can be serialized are supposed to inherit from the
Serializable class. This class is meant to provide a unified API for
such objects. However, so far it has mainly been used by SimObjects
due to some fundamental design limitations. This changeset redesigns
to the serialization interface to make it more generic and hide the
underlying checkpoint storage. Specifically:

* Add a set of APIs to serialize into a subsection of the current
object. Previously, objects that needed this functionality would
use ad-hoc solutions using nameOut() and section name
generation. In the new world, an object that implements the
interface has the methods serializeSection() and
unserializeSection() that serialize into a named /subsection/ of
the current object. Calling serialize() serializes an object into
the current section.

* Move the name() method from Serializable to SimObject as it is no
longer needed for serialization. The fully qualified section name
is generated by the main serialization code on the fly as objects
serialize sub-objects.

* Add a scoped ScopedCheckpointSection helper class. Some objects
need to serialize data structures, that are not deriving from
Serializable, into subsections. Previously, this was done using
nameOut() and manual section name generation. To simplify this,
this changeset introduces a ScopedCheckpointSection() helper
class. When this class is instantiated, it adds a new /subsection/
and subsequent serialization calls during the lifetime of this
helper class happen inside this section (or a subsection in case
of nested sections).

* The serialize() call is now const which prevents accidental state
manipulation during serialization. Objects that rely on modifying
state can use the serializeOld() call instead. The default
implementation simply calls serialize(). Note: The old-style calls
need to be explicitly called using the
serializeOld()/serializeSectionOld() style APIs. These are used by
default when serializing SimObjects.

* Both the input and output checkpoints now use their own named
types. This hides underlying checkpoint implementation from
objects that need checkpointing and makes it easier to change the
underlying checkpoint storage code.

cpu: remove legion tracer

If someone wants to debug with legion again they can restore the
code from the repository, but no need to have it hang around indefinately.

x86 isa: This patch attempts an implementation at mwait.

Mwait works as follows:
1. A cpu monitors an address of interest (monitor instruction)
2. A cpu calls mwait - this loads the cache line into that cpu's cache.
3. The cpu goes to sleep.
4. When another processor requests write permission for the line, it is
evicted from the sleeping cpu's cache. This eviction is forwarded to the
sleeping cpu, which then wakes up.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>

cpu: Probe points for basic PMU stats

This changeset adds probe points that can be used to implement PMU
counters for CPU stats. The following probes are supported:

* BaseCPU::ppCycles / Cycles
* BaseCPU::ppRetiredInsts / RetiredInsts
* BaseCPU::ppRetiredLoads / RetiredLoads
* BaseCPU::ppRetiredStores / RetiredStores
* BaseCPU::ppRetiredBranches RetiredBranches

cpu: Remove unused deallocateContext calls

The call paths for de-scheduling a thread are halt() and suspend(), from
the thread context. There is no call to deallocateContext() in general,
though some CPUs chose to define it. This patch removes the function
from BaseCPU and the cores which do not require it.

alpha,arm,mips,power,x86,cpu,sim: Cleanup activate/deactivate

activate(), suspend(), and halt() used on thread contexts had an optional
delay parameter. However this parameter was often ignored. Also, when used,
the delay was seemily arbitrarily set to 0 or 1 cycle (no other delays were
ever specified). This patch removes the delay parameter and 'Events'
associated with them across all ISAs and cores. Unused activate logic
is also removed.

cpu, arm: Allow the specification of a socket field

Allow the specification of a socket ID for every core that is reflected in the
MPIDR field in ARM systems. This allows studying multi-socket / cluster
systems with ARM CPUs.

cpu: Make CPU and ThreadContext getters const

This patch merely tidies up the CPU and ThreadContext getters by
making them const where appropriate.

cpu: Add CPU support for generatig wake up events when LLSC adresses are snooped.

This patch add support for generating wake-up events in the CPU when an address
that is currently in the exclusive state is hit by a snoop. This mechanism is required
for ARMv8 multi-processor support.

arch: Resurrect the NOISA build target and rename it NULL

This patch makes it possible to once again build gem5 without any
ISA. The main purpose is to enable work around the interconnect and
memory system without having to build any CPU models or device models.

The regress script is updated to include the NULL ISA target. Currently
no regressions make use of it, but all the testers could (and perhaps
should) transition to it.

cpu: Remove unused getBranchPred() method from BaseCPU

Remove unused virtual getBranchPred() method from BaseCPU as it is not
implemented by any of the CPU models. It used to always return NULL.

mem: Set the cache line size on a system level

This patch removes the notion of a peer block size and instead sets
the cache line size on the system level.

Previously the size was set per cache, and communicated through the
interconnect. There were plenty checks to ensure that everyone had the
same size specified, and these checks are now removed. Another benefit
that is not yet harnessed is that the cache line size is now known at
construction time, rather than after the port binding. Hence, the
block size can be locally stored and does not have to be queried every
time it is used.

A follow-on patch updates the configuration scripts accordingly.

cpu: Add support for scheduling multiple inst/load stop events

Currently, the only way to get a CPU to stop after a fixed number of
instructions/loads is to set a property on the CPU that causes a
SimLoopExitEvent to be scheduled when the CPU is constructed. This is
clearly not ideal in cases where the simulation script wants the CPU
to stop at multiple instruction counts (e.g., SimPoint generation).

This changeset adds the methods scheduleInstStop() and
scheduleLoadStop() to the BaseCPU. These methods are exported to
Python and are designed to be used from the simulation script. By
using these methods instead of the old properties, a simulation script
can schedule a stop at any point during simulation or schedule
multiple stops. The number of instructions specified when scheduling a
stop is relative to the current point of execution.

kvm: Avoid synchronizing the TC on every KVM exit

Reduce the number of KVM->TC synchronizations by overloading the
getContext() method and only request an update when the TC is
requested as opposed to every time KVM returns to gem5.

cpu: Remove CpuPort and use MasterPort in the CPU classes

This patch changes the port in the CPU classes to use MasterPort
instead of the derived CpuPort. The functions of the CpuPort are now
distributed across the relevant subclasses. The port accessor
functions (getInstPort and getDataPort) now return a MasterPort
instead of a CpuPort. This simplifies creating derivative CPUs that do
not use the CpuPort.

cpu: Refactor memory system checks

CPUs need to test that the memory system is in the right mode in two
places, when the CPU is initialized (unless it's switched out) and on
a drainResume(). This led to some code duplication in the CPU
models. This changeset introduces the verifyMemoryMode() method which
is called by BaseCPU::init() if the CPU isn't switched out. The
individual CPU models are responsible for calling this method when
resuming from a drain as this code is CPU model specific.

cpu: Unify the serialization code for all of the CPU models

Cleanup the serialization code for the simple CPUs and the O3 CPU. The
CPU-specific code has been replaced with a (un)serializeThread that
serializes the thread state / context of a specific thread. Assuming
that the thread state class uses the CPU-specific thread state uses
the base thread state serialization code, this allows us to restore a
checkpoint with any of the CPU models.

cpu: Flush TLBs on switchOut()

This changeset inserts a TLB flush in BaseCPU::switchOut to prevent
stale translations when doing repeated switching. Additionally, the
TLB flushing functionality is exported to the Python to make debugging
of switching/checkpointing easier.

A simulation script will typically use the TLB flushing functionality
to generate a reference trace. The following sequence can be used to
simulate a handover (this depends on how drain is implemented, but is
generally the case) between identically configured CPU models:

m5.drain(test_sys)
[ cpu.flushTLBs() for cpu in test_sys.cpu ]
m5.resume(test_sys)

The generated trace should normally be identical to a trace generated
when switching between identically configured CPU models or
checkpointing and resuming.

cpu: Introduce sanity checks when switching between CPUs

This patch introduces the following sanity checks when switching
between CPUs:

* Check that the set of new and old CPUs do not overlap. Having an
overlap between the set of new CPUs and the set of old CPUs is
currently not supported. Doing such a switch used to result in the
following assertion error:
BaseCPU::takeOverFrom(BaseCPU*): \
Assertion `!new_itb_port->isConnected()' failed.

* Check that all new CPUs are in the switched out state.

* Check that all old CPUs are in the switched in state.

ARM: dump stats and process info on context switches

This patch enables dumping statistics and Linux process information on
context switch boundaries (__switch_to() calls) that are used for
Streamline integration (a graphical statistics viewer from ARM).

Port: Add protocol-agnostic ports in the port hierarchy

This patch adds an additional level of ports in the inheritance
hierarchy, separating out the protocol-specific and protocl-agnostic
parts. All the functionality related to the binding of ports is now
confined to use BaseMaster/BaseSlavePorts, and all the
protocol-specific parts stay in the Master/SlavePort. In the future it
will be possible to add other protocol-specific implementations.

The functions used in the binding of ports, i.e. getMaster/SlavePort
now use the base classes, and the index parameter is updated to use
the PortID typedef with the symbolic InvalidPortID as the default.

sim: Move CPU-specific methods from SimObject to the BaseCPU class

Clock: Add a Cycles wrapper class and use where applicable

This patch addresses the comments and feedback on the preceding patch
that reworks the clocks and now more clearly shows where cycles
(relative cycle counts) are used to express time.

Instead of bumping the existing patch I chose to make this a separate
patch, merely to try and focus the discussion around a smaller set of
changes. The two patches will be pushed together though.

This changes done as part of this patch are mostly following directly
from the introduction of the wrapper class, and change enough code to
make things compile and run again. There are definitely more places
where int/uint/Tick is still used to represent cycles, and it will
take some time to chase them all down. Similarly, a lot of parameters
should be changed from Param.Tick and Param.Unsigned to
Param.Cycles.

In addition, the use of curTick is questionable as there should not be
an absolute cycle. Potential solutions can be built on top of this
patch. There is a similar situation in the o3 CPU where
lastRunningCycle is currently counting in Cycles, and is still an
absolute time. More discussion to be had in other words.

An additional change that would be appropriate in the future is to
perform a similar wrapping of Tick and probably also introduce a
Ticks class along with suitable operators for all these classes.

Clock: Move the clock and related functions to ClockedObject

This patch moves the clock of the CPU, bus, and numerous devices to
the new class ClockedObject, that sits in between the SimObject and
MemObject in the class hierarchy. Although there are currently a fair
amount of MemObjects that do not make use of the clock, they
potentially should do so, e.g. the caches should at some point have
the same clock as the CPU, potentially with a 1:n ratio. This patch
does not introduce any new clock objects or object hierarchies
(clusters, clock domains etc), but is still a step in the direction of
having a more structured approach clock domains.

The most contentious part of this patch is the serialisation of clocks
that some of the modules (but not all) did previously. This
serialisation should not be needed as the clock is set through the
parameters even when restoring from the checkpoint. In other words,
the state is "stored" in the Python code that creates the modules.

The nextCycle methods are also simplified and the clock phase
parameter of the CPU is removed (this could be part of a clock object
once they are introduced).

CPU: Merge the predecoder and decoder.

These classes are always used together, and merging them will give the ISAs
more flexibility in how they cache things and manage the process.

MEM: Separate requests and responses for timing accesses

This patch moves send/recvTiming and send/recvTimingSnoop from the
Port base class to the MasterPort and SlavePort, and also splits them
into separate member functions for requests and responses:
send/recvTimingReq, send/recvTimingResp, and send/recvTimingSnoopReq,
send/recvTimingSnoopResp. A master port sends requests and receives
responses, and also receives snoop requests and sends snoop
responses. A slave port has the reciprocal behaviour as it receives
requests and sends responses, and sends snoop requests and receives
snoop responses.

For all MemObjects that have only master ports or slave ports (but not
both), e.g. a CPU, or a PIO device, this patch merely adds more
clarity to what kind of access is taking place. For example, a CPU
port used to call sendTiming, and will now call
sendTimingReq. Similarly, a response previously came back through
recvTiming, which is now recvTimingResp. For the modules that have
both master and slave ports, e.g. the bus, the behaviour was
previously relying on branches based on pkt->isRequest(), and this is
now replaced with a direct call to the apprioriate member function
depending on the type of access. Please note that send/recvRetry is
still shared by all the timing accessors and remains in the Port base
class for now (to maintain the current bus functionality and avoid
changing the statistics of all regressions).

The packet queue is split into a MasterPort and SlavePort version to
facilitate the use of the new timing accessors. All uses of the
PacketQueue are updated accordingly.

With this patch, the type of packet (request or response) is now well
defined for each type of access, and asserts on pkt->isRequest() and
pkt->isResponse() are now moved to the appropriate send member
functions. It is also worth noting that sendTimingSnoopReq no longer
returns a boolean, as the semantics do not alow snoop requests to be
rejected or stalled. All these assumptions are now excplicitly part of
the port interface itself.

MEM: Separate snoops and normal memory requests/responses

This patch introduces port access methods that separates snoop
request/responses from normal memory request/responses. The
differentiation is made for functional, atomic and timing accesses and
builds on the introduction of master and slave ports.

Before the introduction of this patch, the packets belonging to the
different phases of the protocol (request -> [forwarded snoop request
-> snoop response]* -> response) all use the same port access
functions, even though the snoop packets flow in the opposite
direction to the normal packet. That is, a coherent master sends
normal request and receives responses, but receives snoop requests and
sends snoop responses (vice versa for the slave). These two distinct
phases now use different access functions, as described below.

Starting with the functional access, a master sends a request to a
slave through sendFunctional, and the request packet is turned into a
response before the call returns. In a system without cache coherence,
this is all that is needed from the functional interface. For the
cache-coherent scenario, a slave also sends snoop requests to coherent
masters through sendFunctionalSnoop, with responses returned within
the same packet pointer. This is currently used by the bus and caches,
and the LSQ of the O3 CPU. The send/recvFunctional and
send/recvFunctionalSnoop are moved from the Port super class to the
appropriate subclass.

Atomic accesses follow the same flow as functional accesses, with
request being sent from master to slave through sendAtomic. In the
case of cache-coherent ports, a slave can send snoop requests to a
master through sendAtomicSnoop. Just as for the functional access
methods, the atomic send and receive member functions are moved to the
appropriate subclasses.

The timing access methods are different from the functional and atomic
in that requests and responses are separated in time and
send/recvTiming are used for both directions. Hence, a master uses
sendTiming to send a request to a slave, and a slave uses sendTiming
to send a response back to a master, at a later point in time. Snoop
requests and responses travel in the opposite direction, similar to
what happens in functional and atomic accesses. With the introduction
of this patch, it is possible to determine the direction of packets in
the bus, and no longer necessary to look for both a master and a slave
port with the requested port id.

In contrast to the normal recvFunctional, recvAtomic and recvTiming
that are pure virtual functions, the recvFunctionalSnoop,
recvAtomicSnoop and recvTimingSnoop have a default implementation that
calls panic. This is to allow non-coherent master and slave ports to
not implement these functions.

Atomic: Remove the physmem_port and access memory directly

This patch removes the physmem_port from the Atomic CPU and instead
uses the system pointer to access the physmem when using the fastmem
option. The system already keeps track of the physmem and the valid
memory address ranges, and with this patch we merely make use of that
existing functionality. As a result of this change, the overloaded
getMasterPort in the Atomic CPU can be removed, thus unifying the CPUs.

MEM: Introduce the master/slave port sub-classes in C++

This patch introduces the notion of a master and slave port in the C++
code, thus bringing the previous classification from the Python
classes into the corresponding simulation objects and memory objects.

The patch enables us to classify behaviours into the two bins and add
assumptions and enfore compliance, also simplifying the two
interfaces. As a starting point, isSnooping is confined to a master
port, and getAddrRanges to slave ports. More of these specilisations
are to come in later patches.

The getPort function is not getMasterPort and getSlavePort, and
returns a port reference rather than a pointer as NULL would never be
a valid return value. The default implementation of these two
functions is placed in MemObject, and calls fatal.

The one drawback with this specific patch is that it requires some
code duplication, e.g. QueuedPort becomes QueuedMasterPort and
QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort
(avoiding multiple inheritance). With the later introduction of the
port interfaces, moving the functionality outside the port itself, a
lot of the duplicated code will disappear again.

clang: Fix recently introduced clang compilation errors

This patch makes the code compile with clang 2.9 and 3.0 again by
making two very minor changes. Firt, it maintains a strict typing in
the forward declaration of the BaseCPUParams. Second, it adds a
FullSystemInt flag of the type unsigned int next to the boolean
FullSystem flag. The FullSystemInt variable can be used in
decode-statements (expands to switch statements) in the instruction
decoder.

CPU: Check that the interrupt controller is created when needed

This patch adds a creation-time check to the CPU to ensure that the
interrupt controller is created for the cases where it is needed,
i.e. if the CPU is not being switched in later and not a checker CPU.

The patch also adds the "createInterruptController" call to a number
of the regression scripts.

CPU: Round-two unifying instr/data CPU ports across models

This patch continues the unification of how the different CPU models
create and share their instruction and data ports. Most importantly,
it forces every CPU to have an instruction and a data port, and gives
these ports explicit getters in the BaseCPU (getDataPort and
getInstPort). The patch helps in simplifying the code, make
assumptions more explicit, andfurther ease future patches related to
the CPU ports.

The biggest changes are in the in-order model (that was not modified
in the previous unification patch), which now moves the ports from the
CacheUnit to the CPU. It also distinguishes the instruction fetch and
load-store unit from the rest of the resources, and avoids the use of
indices and casting in favour of keeping track of these two units
explicitly (since they are always there anyways). The atomic, timing
and O3 model simply return references to their already existing ports.

cpu: add separate stats for insts/ops both globally and per cpu model

mem: Add a master ID to each request object.

This change adds a master id to each request object which can be
used identify every device in the system that is capable of issuing a request.
This is part of the way to removing the numCpus+1 stats in the cache and
replacing them with the master ids. This is one of a series of changes
that make way for the stats output to be changed to python.

Merge with head, hopefully the last time for this batch.

Merge with the main repo.

Merge yet again with the main repository.

SE/FS: Get rid of includes of config/full_system.hh.

SE/FS: Get rid of FULL_SYSTEM in the CPU directory.

SE/FS: Expose the same methods on the CPUs in SE and FS modes.

SE/FS: Build the Interrupt objects in SE mode.

clang: Enable compiling gem5 using clang 2.9 and 3.0

This patch adds the necessary flags to the SConstruct and SConscript
files for compiling using clang 2.9 and later (on Ubuntu et al and OSX
XCode 4.2), and also cleans up a bunch of compiler warnings found by
clang. Most of the warnings are related to hidden virtual functions,
comparisons with unsigneds >= 0, and if-statements with empty
bodies. A number of mismatches between struct and class are also
fixed. clang 2.8 is not working as it has problems with class names
that occur in multiple namespaces (e.g. Statistics in
kernel_stats.hh).

clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which
causes confusion between the container std::set and the function
Packet::set, and this is currently addressed by not including the
entire namespace std, but rather selecting e.g. "using std::vector" in
the appropriate places.

MEM: Separate queries for snooping and address ranges

This patch simplifies the address-range determination mechanism and
also unifies the naming across ports and devices. It further splits
the queries for determining if a port is snooping and what address
ranges it responds to (aiming towards a separation of
cache-maintenance ports and pure memory-mapped ports). Default
behaviours are such that most ports do not have to define isSnooping,
and master ports need not implement getAddrRanges.

CPU: Moving towards a more general port across CPU models

This patch performs minimal changes to move the instruction and data
ports from specialised subclasses to the base CPU (to the largest
degree possible). Ultimately it servers to make the CPU(s) have a
well-defined interface to the memory sub-system.

O3: Add support of function tracing with O3 CPU.

includes: sort all includes

mips: cleanup ISA-specific code
***
(1): get rid of expandForMT function
MIPS is the only ISA that cares about having a piece of ISA state integrate
multiple threads so add constants for MIPS and relieve the other ISAs from having
to define this. Also, InOrder was the only core that was actively calling
this function
* * *
(2): get rid of corespecific type
The CoreSpecific type was used as a proxy to pass in HW specific params to
a MIPS CPU, but since MIPS FS hasnt been touched for awhile, it makes sense
to not force every other ISA to use CoreSpecific as well use a special
reset function to set it. That probably should go in a PowerOn reset fault
anyway.

m5: added work completed monitoring support

mcpat: Adds McPAT performance counters

Updated patches from Rick Strong's set that modify performance counters for
McPAT

Replace curTick global variable with accessor functions.
This step makes it easy to replace the accessor functions
(which still access a global variable) with ones that access
per-thread curTick values.

O3: Make O3 support variably lengthed instructions.

tick: rename Clock namespace to SimClock

since totalInstructions() is impl'ed by all the cpus, make it an abstract base class.

arch: nuke arch/isa_specific.hh and move stuff to generated config/the_isa.hh

types: add a type for thread IDs and try to use it everywhere

cpus: fix cpu progress event
this was double scheduling itself (once in constructor and once in cpu code). also add support for stopping / starting
progress events through repeatEvent flag and also changing the interval of the progress event as well

cpus: fix cpu progress event
this was double scheduling itself (once in constructor and once in cpu code). also add support for stopping / starting
progress events through repeatEvent flag and also changing the interval of the progress event as well

stats: Fix all stats usages to deal with template fixes

cpu: provide a wakeup mechanism that can be used to pull CPUs out of sleep.
Make interrupts use the new wakeup method, and pull all of the interrupt
stuff into the cpu base class so that only the wakeup code needs to be updated.
I tried to make wakeup, wakeCPU, and the various other mechanisms for waking
and sleeping a little more sane, but I couldn't understand why the statistics
were changing the way they were. Maybe we'll try again some day.

get rid of all instances of readTid() and getThreadNum(). Unify and eliminate
redundancies with threadId() as their replacement.

make BaseCPU the provider of _cpuId, and cpuId() instead of being scattered
across the subclasses. generally make it so that member data is _cpuId and
accessor functions are cpuId(). The ID val comes from the python (default -1 if
none provided), and if it is -1, the index of cpuList will be given. this has
passed util/regress quick and se.py -n4 and fs.py -n4 as well as standard
switch.

style: Use the correct m5 style for things relating to interrupts.

CPU: Create a microcode ROM object in the CPU which is defined by the ISA.

Turn Interrupts objects into SimObjects. Also, move local APIC state into x86's Interrupts object.

CPU: Eliminate the get_vec function.

CPU: Add a getInterruptController function

eventq: convert all usage of events to use the new API.
For now, there is still a single global event queue, but this is
necessary for making the steps towards a parallelized m5.

Changed BaseCPU::ProfileEvent's interval member to be of type Tick. This was done to be consistent with its
python type of a latency. In addition, the multiple definitions of profile in the different cpu models caused
problems for intialization of the interval value. If a child class's profile value was defined, the parent
BaseCPU::ProfileEvent interval field would be initialized with a garbage value. The fix was to remove the
multiple redifitions of profile in the child CPU classes.

params: Convert the CPU objects to use the auto generated param structs.
A whole bunch of stuff has been converted to use the new params stuff, but
the CPU wasn't one of them. While we're at it, make some things a bit
more stylish. Most of the work was done by Gabe, I just cleaned stuff up
a bit more at the end.

Make the Event::description() a const function

add core specific parameter to BaseCPU params

Add in files from merge-bare-iron, get them compiling in FS and SE mode

Rename cycles() function to ticks()

Update statistics to use cycles properly instead of ticks

Turn the instruction tracing code into pluggable sim objects.
These need to be refined a little still and given parameters.

Merge zizzer.eecs.umich.edu:/bk/newmem
into ahchoo.blinky.homelinux.org:/home/gblack/m5/newmem-x86

src/arch/mips/utility.hh:
src/arch/x86/SConscript:
Hand merge

Two fixes:
1. Make sure connectMemPorts() only gets called when the CPU's peer gets changed. This is done by making setPeer() virtual, and overriding it in the CPU's ports. When it gets called on a CPU's port (dcache specifically), it calls the normal setPeer() function, and also connectMemPorts().
2. Consolidate redundant code that handles switching in a CPU.

src/cpu/base.cc:
Move common code of switching over peers to base CPU.
src/cpu/base.hh:
Move common code of switching over peers to BaseCPU.
src/cpu/o3/cpu.cc:
Add in function that updates thread context's ports.
Also use updated function to takeOverFrom() in BaseCPU. This gets rid of some repeated code.
src/cpu/o3/cpu.hh:
Include function to update thread context's memory ports.
src/cpu/o3/lsq.hh:
Add function to dcache port that will update the memory ports upon getting a new peer.
Also include a function that will tell the CPU to update those memory ports.
src/cpu/o3/lsq_impl.hh:
Add function that will update the memory ports upon getting a new peer.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Add function that will update thread context's memory ports upon getting a new peer.
Also use the new BaseCPU's take over from function.
src/cpu/simple/atomic.hh:
Add in function (and dcache port) that will allow the dcache to update memory ports when it gets assigned a new peer.
src/cpu/simple/timing.hh:
Add function that will update thread context's memory ports upon getting a new peer.
src/mem/port.hh:
Make setPeer virtual so that other classes can override it.

Make the predecoder an object with it's own switched header file. Start adding predecoding functionality to x86.

src/arch/SConscript:
src/arch/alpha/utility.hh:
src/arch/mips/utility.hh:
src/arch/sparc/utility.hh:
src/cpu/base.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/static_inst.hh:
src/arch/alpha/predecoder.hh:
src/arch/mips/predecoder.hh:
src/arch/sparc/predecoder.hh:
Make the predecoder an object with it's own switched header file.

Implement Niagara I/O interface and rework interrupts

configs/common/FSConfig.py:
Use binaries we've compiled instead of the ones that come with Legion
src/arch/alpha/interrupts.hh:
get rid of post(int int_type) and add a get_vec function that gets the interrupt vector for an interrupt number
src/arch/sparc/asi.cc:
Add AsiIsInterrupt() to AsiIsMmu()
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
Add InterruptVector type
src/arch/sparc/interrupts.hh:
rework interrupts. They are no longer cleared when created... A I/O or ASI read/write needs to happen before they are cleared
src/arch/sparc/isa_traits.hh:
Add the "interrupt" trap types to isa traits
src/arch/sparc/miscregfile.cc:
add names for all the misc registers and possible post an interrupt when TL is changed.
src/arch/sparc/miscregfile.hh:
Add a helper function to post an interrupt when pil < some set softint
src/arch/sparc/regfile.cc:
src/arch/sparc/regfile.hh:
InterruptLevel shouldn't really live here, moved to interrupt.hh
src/arch/sparc/tlb.cc:
Add interrupt ASIs to TLB
src/arch/sparc/ua2005.cc:
Add checkSoftInt to check if a softint needs to be posted
Check that a tickCompare isn't scheduled before scheduling one
Post and clear interrupts on queue writes and what not
src/base/bitfield.hh:
Add an helper function to return the msb that is set
src/cpu/base.cc:
src/cpu/base.hh:
get rid of post_interrupt(type) since it's no longer needed.. Add a way to see what interrupts are pending
src/cpu/intr_control.cc:
src/cpu/intr_control.hh:
src/dev/alpha/tsunami_cchip.cc:
src/python/m5/objects/IntrControl.py:
Make IntrControl have a system pointer rather than using a cpu pointer to get one
src/dev/sparc/SConscript:
add iob to SConsscrip
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.out:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.out:
update config.ini/out for intrcntrl not having a cpu pointer anymore

Make SPARC checkpointing work

src/arch/sparc/floatregfile.cc:
Fix serialization for fpreg
src/arch/sparc/intregfile.cc:
fix serialization for intreg
src/arch/sparc/miscregfile.cc:
fix serialization from miscreg
src/arch/sparc/pagetable.cc:
fix serialization for page table
src/arch/sparc/regfile.cc:
need to serialize nnpc
src/arch/sparc/tlb.cc:
write serialization code for tlb
src/cpu/base.cc:
provide a way to find the thread number a context is
serialize the instruction counter
src/cpu/base.hh:
provide a way to find the thread number a context is
and given a thread number find a context pointer
src/cpu/cpuevent.hh:
provide method to get thread context from a cpu event for serialization
src/dev/sparc/t1000.cc:
src/dev/sparc/t1000.hh:
nothing to serialize in t1000
src/sim/serialize.cc:
src/sim/serialize.hh:
Make findObj() work (it hasn't since we did the python conversion stuff)

eliminate cpu checkInterrupts bool, it is redundant and unnecessary.

the way i understand it, interrupts in m5 is a little bloated. the usage of CPU->checkInterrupts bool is inconsistent, and i think should eventually be phased out. For now, I've just assumed that CPU->checkInterrupts() is the way to fast path a CPU if you have no interrupts by having a simple bitfield in each ISA to determine whether interrupts are pending. getInterrupts has been mostly filled in.

src/arch/sparc/interrupts.hh:
fill in how we do interrupts on sparc a little bit.

1) create a bitfield for interrupts, and check that in checkInterrupts() to fast path CPU.
2) fill in getInterrupts() a little bit.

also, update the bitfield access to be HPSTATE::hpriv, etc.
src/arch/sparc/ua2005.cc:
1) update formatting
2) change the way interrupts are done to use the new way to tickle the CPU.
src/cpu/base.cc:
src/cpu/base.hh:
overload the post_interrupt function for SPARC interrupts - which are only denoted by a single int value.

More changes to get SPARC fs closer. Now at 1.2M cycles before difference

configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller

Make cpu's capable of having a phase shift

Get rid of the ParamContext for pseudo instructions and move
the parameters to the BaseCPU object.

Merge zizzer.eecs.umich.edu:/bk/newmem/
into zeep.eecs.umich.edu:/home/gblack/m5/newmemmemops

src/SConscript:
SCCS merged

Got rid of "inPalMode". Some places are still effectively checking if they are in PAL mode, however.

Add a new file which describes an ISA's interrupt handling mechanism. It records when interrupts are requested, and returns an interrupt to execute if the

Clean up clock phase drift code a bit.

src/cpu/base.cc:
Move clock phase drift code to the base CPU so that any CPU model can use it.
src/cpu/base.hh:
Added two functions to help get the next cycle the CPU should be scheduled.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Use the function now in BaseCPU.

Implement Alpha LL/SC support for SimpleCPU (Atomic & Timing)
and PhysicalMemory. *No* support for caches or O3CPU.
Note that properly setting cpu_id on all CPUs is now required
for correct operation.

src/arch/SConscript:
src/base/traceflags.py:
src/cpu/base.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
src/python/m5/objects/BaseCPU.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
Implement Alpha LL/SC support for SimpleCPU (Atomic & Timing)
and PhysicalMemory. *No* support for caches or O3CPU.

Updates to fix merge issues and bring almost everything up to working speed. Ozone CPU remains untested, but everything else compiles and runs.

src/arch/alpha/isa_traits.hh:
This got changed to the wrong version by accident.
src/cpu/base.cc:
Fix up progress event to not schedule itself if the interval is set to 0.
src/cpu/base.hh:
Fix up the CPU Progress Event to not print itself if it's set to 0. Also remove stats_reset_inst (something I added to m5 but isn't necessary here).
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.hh:
Remove float variable of instResult; it's always held within the double part now.
src/cpu/checker/cpu_impl.hh:
Use thread and not cpuXC.
src/cpu/o3/alpha/cpu_builder.cc:
src/cpu/o3/checker_builder.cc:
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu_builder.cc:
src/python/m5/objects/BaseCPU.py:
Remove stats_reset_inst.
src/cpu/o3/commit_impl.hh:
src/cpu/ozone/lw_back_end_impl.hh:
Get TC, not XCProxy.
src/cpu/o3/cpu.cc:
Switch out updates from the version of m5 I have. Also remove serialize code that got added twice.
src/cpu/o3/iew_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/thread_state.hh:
Remove code that was added twice.
src/cpu/o3/lsq_unit.hh:
Add back in stats that got lost in the merge.
src/cpu/o3/lsq_unit_impl.hh:
Use proper method to get flags. Also wake CPU if we're coming back from a cache miss.
src/cpu/o3/thread_context_impl.hh:
src/cpu/o3/thread_state.hh:
Support profiling.
src/cpu/ozone/cpu.hh:
Update to use proper typename.
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/dyn_inst_impl.hh:
Updates for newmem.
src/cpu/ozone/lw_lsq_impl.hh:
Get flags correctly.
src/cpu/ozone/thread_state.hh:
Reorder constructor initialization, use tc.
src/sim/pseudo_inst.cc:
Allow for loading of symbol file. Be sure to use ThreadContext and not ExecContext.

Merge ktlim@zamp:./local/clean/o3-merge/m5
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem

configs/boot/micro_memlat.rcS:
configs/boot/micro_tlblat.rcS:
src/arch/alpha/ev5.cc:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa_traits.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.hh:
src/cpu/checker/cpu_impl.hh:
src/cpu/o3/alpha/cpu_impl.hh:
src/cpu/o3/alpha/params.hh:
src/cpu/o3/checker_builder.cc:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/base.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.hh:
src/dev/ide_disk.cc:
src/python/m5/objects/O3CPU.py:
src/python/m5/objects/Root.py:
src/python/m5/objects/System.py:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/system.hh:
util/m5/m5.c:
Hand merge.

Update cpus to use the getPort function to use a connector object to connect the I/D cache ports to memory

configs/test/test.py:
Update to use new cpu getPort functionality
src/cpu/base.cc:
Make cpu's a memObject to expose getPort interface
src/cpu/base.hh:
Make cpu's a memObject to export getPort interface
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Now use the connector via getPort interface
src/mem/cache/base_cache.cc:
Make sure the cache recognizes all port names

Remove sampler and serializer. Now they are handled through C++ interacting with Python.

src/SConscript:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/checker/cpu.hh:
src/cpu/checker/cpu_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/sim/pseudo_inst.cc:
Remove sampler.
src/sim/sim_object.cc:
Remove serializer.

Various fixes for the CPU models to support the features that have been moved to python.

src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/simple/atomic.hh:
Switching out no longer takes a sampler.
src/cpu/simple/atomic.cc:
Fix up switching out. Also fix up serialization; the nameOut() was messing up the ordering.
src/cpu/simple/timing.cc:
Add in quiesce, fix up serialization.
src/cpu/simple/timing.hh:
Add in queisce, fix up serialization.

Change ExecContext to ThreadContext. This is being renamed to differentiate between the interface used objects outside of the CPU, and the interface used by the ISA. ThreadContext is used by objects outside of the CPU and is specifically defined in thread_context.hh. ExecContext is more implicit, and is defined by files such as base_dyn_inst.hh or cpu/simple/base.hh.

Further renames/reorganization will be coming shortly; what is currently CPUExecContext (the old ExecContext from m5) will be renamed to SimpleThread or something similar.

src/arch/alpha/arguments.cc:
src/arch/alpha/arguments.hh:
src/arch/alpha/ev5.cc:
src/arch/alpha/faults.cc:
src/arch/alpha/faults.hh:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/freebsd/system.hh:
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/linux/system.hh:
src/arch/alpha/linux/threadinfo.hh:
src/arch/alpha/process.cc:
src/arch/alpha/regfile.hh:
src/arch/alpha/stacktrace.cc:
src/arch/alpha/stacktrace.hh:
src/arch/alpha/tlb.cc:
src/arch/alpha/tlb.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/system.cc:
src/arch/alpha/tru64/system.hh:
src/arch/alpha/utility.hh:
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/process.cc:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/regfile/regfile.hh:
src/arch/mips/stacktrace.hh:
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/regfile.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/stacktrace.hh:
src/arch/sparc/ua2005.cc:
src/arch/sparc/utility.hh:
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
src/base/remote_gdb.cc:
src/base/remote_gdb.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/cpu_exec_context.cc:
src/cpu/cpu_exec_context.hh:
src/cpu/cpuevent.cc:
src/cpu/cpuevent.hh:
src/cpu/exetrace.hh:
src/cpu/intr_control.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/pc_event.cc:
src/cpu/pc_event.hh:
src/cpu/profile.cc:
src/cpu/profile.hh:
src/cpu/quiesce_event.cc:
src/cpu/quiesce_event.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
src/cpu/thread_state.hh:
src/dev/alpha_console.cc:
src/dev/ns_gige.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/linux/events.cc:
src/kern/linux/events.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/kern/tru64/dump_mbuf.cc:
src/kern/tru64/tru64.hh:
src/kern/tru64/tru64_events.cc:
src/kern/tru64/tru64_events.hh:
src/mem/vport.cc:
src/mem/vport.hh:
src/sim/faults.cc:
src/sim/faults.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
src/sim/system.cc:
src/cpu/thread_context.hh:
src/sim/system.hh:
src/sim/vptr.hh:
Change ExecContext to ThreadContext.

Merge ktlim@zizzer:/bk/newmem
into zizzer.eecs.umich.edu:/.automount/zamp/z/ktlim2/clean/newmem

Updated Authors from bk prs info

Merge ktlim@zizzer:/bk/m5
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem

SConstruct:
src/SConscript:
src/arch/SConscript:
src/arch/alpha/faults.cc:
src/arch/alpha/tlb.cc:
src/base/traceflags.py:
src/cpu/SConscript:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.cc:
src/cpu/cpu_exec_context.cc:
src/cpu/cpu_exec_context.hh:
src/cpu/exec_context.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/regfile.hh:
src/cpu/ozone/cpu.hh:
src/cpu/simple/base.cc:
src/cpu/base_dyn_inst.hh:
src/cpu/o3/2bit_local_pred.cc:
src/cpu/o3/2bit_local_pred.hh:
src/cpu/o3/alpha_cpu.cc:
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_dyn_inst.cc:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/alpha_impl.hh:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/bpred_unit.cc:
src/cpu/o3/bpred_unit.hh:
src/cpu/o3/bpred_unit_impl.hh:
src/cpu/o3/btb.cc:
src/cpu/o3/btb.hh:
src/cpu/o3/comm.hh:
src/cpu/o3/commit.cc:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu_policy.hh:
src/cpu/o3/decode.cc:
src/cpu/o3/decode.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch.cc:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/free_list.cc:
src/cpu/o3/free_list.hh:
src/cpu/o3/iew.cc:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.cc:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/mem_dep_unit.cc:
src/cpu/o3/mem_dep_unit.hh:
src/cpu/o3/mem_dep_unit_impl.hh:
src/cpu/o3/ras.cc:
src/cpu/o3/ras.hh:
src/cpu/o3/rename.cc:
src/cpu/o3/rename.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rename_map.cc:
src/cpu/o3/rename_map.hh:
src/cpu/o3/rob.cc:
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
src/cpu/o3/sat_counter.cc:
src/cpu/o3/sat_counter.hh:
src/cpu/o3/store_set.cc:
src/cpu/o3/store_set.hh:
src/cpu/o3/tournament_pred.cc:
src/cpu/o3/tournament_pred.hh:
Hand merges.

New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.