Searched hist:12419 (Results 1 - 14 of 14) sorted by relevance
| /gem5/src/cpu/simple/ | ||
| H A D | noncaching.cc | 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
| H A D | noncaching.hh | 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
| H A D | NonCachingSimpleCPU.py | 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
| H A D | SConscript | diff 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
| H A D | AtomicSimpleCPU.py | diff 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
| H A D | atomic.hh | diff 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
| H A D | atomic.cc | diff 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
| /gem5/tests/configs/ | ||
| H A D | realview-switcheroo-noncaching-timing.py | 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
| /gem5/tests/testing/ | ||
| H A D | tests.py | diff 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
| /gem5/configs/common/ | ||
| H A D | CpuConfig.py | diff 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
| H A D | Options.py | diff 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
| /gem5/src/arch/arm/ | ||
| H A D | tlb.hh | diff 12419:8a3f230e9c37 Fri Jan 05 19:17:00 EST 2018 Gabe Black <gabeblack@google.com> arm: Make translateFunctional override the base implementation. Now that translateFunctional is a virtual function, having an extra parameter with a default value makes the compiler fall through to the base implementation instead of overriding it. This change removes the default value for the extra parameter, and adds a small wrapper with the correct signature which overrides the base implementation and calls the full version with the previously default value for the extra parameter. To callers this will look like the same thing, but the the right function will get called. This was what was already being done for transateAtomic and translateTiming. Change-Id: I0b71adf34fd6f326005edbb8eaac93275b437c55 Reviewed-on: https://gem5-review.googlesource.com/7121 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com> |
| /gem5/configs/example/ | ||
| H A D | fs.py | diff 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
| H A D | se.py | diff 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
Completed in 215 milliseconds