arch: cpu: Rename *FloatRegBits* to *FloatReg*.

Now that there's no plain FloatReg, there's no reason to distinguish
FloatRegBits with a special suffix since it's the only way to read or
write FP registers.

Change-Id: I3a60168c1d4302aed55223ea8e37b421f21efded
Reviewed-on: https://gem5-review.googlesource.com/c/14460
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch: Fix all override related warnings.

Clang has started(?) reporting override related warnings, something gcc
apparently did before, but was disabled in the SConstruct. Rather than
disable the warnings in for clang as well, this change fixes the
warnings. A future change will re-enable the warnings for gcc.

Change-Id: I3cc79e45749b2ae0f9bebb1acadc56a3d3a942da
Reviewed-on: https://gem5-review.googlesource.com/9343
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

alpha,arm,mips,power,riscv,sparc,x86,isa: De-specialize ExecContexts.

The ISA parser used to generate different copies of exec functions
for each exec context class a particular CPU wanted to use. That's
since been changed so that those functions take a pointer to the base
ExecContext, so the code which would generate those extra functions
can be removed, and some functions which used to be templated on an
ExecContext subclass can be untemplated, or minimally less templated.

Now that some functions aren't going to be instantiated multiple times
with different signatures, there are also opportunities to collapse
templates and make many instruction definitions simpler within the
parser. Since those changes will be less mechanical, they're left for
later changes and will probably be done in smaller increments.

Change-Id: I0015307bb02dfb9c60380b56d2a820f12169ebea
Reviewed-on: https://gem5-review.googlesource.com/5381
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch: Use shared_ptr for all Faults

This patch takes quite a large step in transitioning from the ad-hoc
RefCountingPtr to the c++11 shared_ptr by adopting its use for all
Faults. There are no changes in behaviour, and the code modifications
are mostly just replacing "new" with "make_shared".

arch: teach ISA parser how to split code across files

This patch encompasses several interrelated and interdependent changes
to the ISA generation step. The end goal is to reduce the size of the
generated compilation units for instruction execution and decoding so
that batch compilation can proceed with all CPUs active without
exhausting physical memory.

The ISA parser (src/arch/isa_parser.py) has been improved so that it can
accept 'split [output_type];' directives at the top level of the grammar
and 'split(output_type)' python calls within 'exec {{ ... }}' blocks.
This has the effect of "splitting" the files into smaller compilation
units. I use air-quotes around "splitting" because the files themselves
are not split, but preprocessing directives are inserted to have the same
effect.

Architecturally, the ISA parser has had some changes in how it works.
In general, it emits code sooner. It doesn't generate per-CPU files,
and instead defers to the C preprocessor to create the duplicate copies
for each CPU type. Likewise there are more files emitted and the C
preprocessor does more substitution that used to be done by the ISA parser.

Finally, the build system (SCons) needs to be able to cope with a
dynamic list of source files coming out of the ISA parser. The changes
to the SCons{cript,truct} files support this. In broad strokes, the
targets requested on the command line are hidden from SCons until all
the build dependencies are determined, otherwise it would try, realize
it can't reach the goal, and terminate in failure. Since build steps
(i.e. running the ISA parser) must be taken to determine the file list,
several new build stages have been inserted at the very start of the
build. First, the build dependencies from the ISA parser will be emitted
to arch/$ISA/generated/inc.d, which is then read by a new SCons builder
to finalize the dependencies. (Once inc.d exists, the ISA parser will not
need to be run to complete this step.) Once the dependencies are known,
the 'Environments' are made by the makeEnv() function. This function used
to be called before the build began but now happens during the build.
It is easy to see that this step is quite slow; this is a known issue
and it's important to realize that it was already slow, but there was
no obvious cause to attribute it to since nothing was displayed to the
terminal. Since new steps that used to be performed serially are now in a
potentially-parallel build phase, the pathname handling in the SCons scripts
has been tightened up to deal with chdir() race conditions. In general,
pathnames are computed earlier and more likely to be stored, passed around,
and processed as absolute paths rather than relative paths. In the end,
some of these issues had to be fixed by inserting serializing dependencies
in the build.

Minor note:
For the null ISA, we just provide a dummy inc.d so SCons is never
compelled to try to generate it. While it seems slightly wrong to have
anything in src/arch/*/generated (i.e. a non-generated 'generated' file),
it's by far the simplest solution.

mips: Floating point convert bug fix

In mips architecture, floating point convert instructions use the
FloatConvertOp format defined in src/arch/mips/isa/formats/fp.isa. The type
of the operands in the ISA description file (_sw for signed word, or _sf for
signed float, etc.) is used to create a type for the operand in C++. Then the
operand is converted using the fpConvert() function in src/arch/mips/utility.cc.

If we are converting from a word to a float, and we want to convert 0xffffffff,
we expect -1 to be passed into fpConvert(). Instead, we see MAX_INT passed in.
Then fpConvert() converts _val_ to MAX_INT in single-precision floating point,
and we get the wrong value.

To fix it, the signs of the convert operands are being changed from unsigned to
signed in the MIPS ISA description.

Then, the FloatConvertOp format is being changed to insert a int32_t into the
C++ code instead of a uint32_t.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>

scons: Add warning for missing declarations

This patch enables warnings for missing declarations. To avoid issues
with SWIG-generated code, the warning is only applied to non-SWIG
code.

SE/FS: Use the new FullSystem constant where possible.

ISA parser: Use '_' instead of '.' to delimit type modifiers on operands.

By using an underscore, the "." is still available and can unambiguously be
used to refer to members of a structure if an operand is a structure, class,
etc. This change mostly just replaces the appropriate "."s with "_"s, but
there were also a few places where the ISA descriptions where handling the
extensions themselves and had their own regular expressions to update. The
regular expressions in the isa parser were updated as well. It also now
looks for one of the defined type extensions specifically after connecting "_"
where before it would look for any sequence of characters after a "."
following an operand name and try to use it as the extension. This helps to
disambiguate cases where a "_" may legitimately be part of an operand name but
not separate the name from the type suffix.

Because leaving the "_" and suffix on the variable name still leaves a valid
C++ identifier and all extensions need to be consistent in a given context, I
considered leaving them on as a breadcrumb that would show what the intended
type was for that operand. Unfortunately the operands can be referred to in
code templates, the Mem operand in particular, and since the exact type of Mem
can be different for different uses of the same template, that broke things.

MIPS: Get rid of #if style config checks in the ISA description.

MIPS: Format the register index constants like the other ISAs.
Also a few more style fixes.

Registers: Get rid of the float register width parameter.

go back and fix up MIPS copyright headers

Add in files from merge-bare-iron, get them compiling in FS and SE mode

fix store instructions, pass fast/quick Atomic/TimingSimpleCPU regressions...

src/arch/mips/isa/decoder.isa:
commment out deret instruction for now...
src/arch/mips/isa/formats/fp.isa:
edit fp format
src/arch/mips/isa/formats/mem.isa:
fix for basic store instructions

mips import pt. 1

src/arch/mips/SConscript:
"mips import pt.1".

Started removing "CodeBlock" objects from the mips isa description.

Rename the StaticInst-based (read|set)(Int|Float)Reg methods to (read|set)(Int|Float)RegOperand to distinguish from non-StaticInst version.

more steps toward O3 SMT

src/arch/mips/isa/formats/fp.isa:
Adjust for newmem
src/cpu/cpu_models.py:
Use O3DynInst instead of convoluted way
src/cpu/o3/alpha/impl.hh:
take out O3DynInst typedef here ...
src/cpu/o3/cpu.cc:
open up the SMT functions in the O3CPU
src/cpu/static_inst.hh:
Add O3DynInst
src/cpu/o3/dyn_inst.hh:
Use to get ISA-specific O3DynInst

Mips Code Cleanup:
Fix some author stuff and copyright dates
Take out full system code

src/arch/mips/isa/base.isa:
src/arch/mips/isa/bitfields.isa:
copyright info
src/arch/mips/isa/decoder.isa:
src/arch/mips/isa/formats/basic.isa:
src/arch/mips/isa/formats/branch.isa:
src/arch/mips/isa/formats/control.isa:
src/arch/mips/isa/formats/fp.isa:
src/arch/mips/isa/formats/int.isa:
src/arch/mips/isa/formats/mem.isa:
src/arch/mips/isa/formats/noop.isa:
src/arch/mips/isa/formats/tlbop.isa:
src/arch/mips/isa/formats/trap.isa:
src/arch/mips/isa/formats/unimp.isa:
src/arch/mips/isa/formats/unknown.isa:
src/arch/mips/isa/formats/util.isa:
src/arch/mips/isa/includes.isa:
src/arch/mips/isa/main.isa:
src/arch/mips/isa/operands.isa:
src/arch/mips/process.cc:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/stacktrace.hh:
copyright 2006
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
copyright 2006
take out full system
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/regfile.hh:
copyright 2006
use FloatRegVal
src/arch/mips/regfile/int_regfile.hh:
copyright 2006
move HI/LO to types.hh
src/arch/mips/types.hh:
copyright 2006

typedef FloatRegVal

Authorship stuff

add fcntl64Func

use ThreadContext rename

src/arch/mips/isa/formats/branch.isa:
src/arch/mips/isa/formats/fp.isa:
src/arch/mips/isa/includes.isa:
Use ThreadContext
src/sim/syscall_emul.cc:
fcntl64 function using TC
src/sim/syscall_emul.hh:
Add fcntl64func

Merging in a month of changes

src/arch/isa_parser.py:
Sign extend bit if you read int reg that is greater than default size
src/arch/mips/SConscript:
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
src/arch/mips/isa/base.isa:
src/arch/mips/isa/bitfields.isa:
src/arch/mips/isa/decoder.isa:
src/arch/mips/isa/formats/basic.isa:
src/arch/mips/isa/formats/branch.isa:
src/arch/mips/isa/formats/formats.isa:
src/arch/mips/isa/formats/fp.isa:
src/arch/mips/isa/formats/int.isa:
src/arch/mips/isa/formats/mem.isa:
src/arch/mips/isa/formats/noop.isa:
src/arch/mips/isa/formats/tlbop.isa:
src/arch/mips/isa/formats/trap.isa:
src/arch/mips/isa/formats/unimp.isa:
src/arch/mips/isa/formats/unknown.isa:
src/arch/mips/isa/formats/util.isa:
src/arch/mips/isa/includes.isa:
src/arch/mips/isa/main.isa:
src/arch/mips/isa/operands.isa:
src/arch/mips/isa_traits.cc:
src/arch/mips/linux/process.cc:
src/arch/mips/linux/process.hh:
src/arch/mips/process.cc:
src/arch/mips/process.hh:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/utility.hh:
1 month of changes!
src/arch/mips/isa/formats/control.isa:
control formats
src/arch/mips/isa/formats/mt.isa:
mips mt format
src/arch/mips/utility.cc:
utility functions

New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.