arch-arm: Overload currEL helper with CPSR argument

Change-Id: I1edabc61637ecb9d30bca34b5dbcf1de12b35fe0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20250
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Rewrite the currEL helper method to use opModeToEL

Direct use of cpsr.el should be discouraged: it should be used when
in AArch64 only; when in AArch32 it won't return the matching EL.

Eg: when in Supervisor Mode (EL1), CPSR.M<3,0> (mode) is 0b0011,
and cpsr.el will return 0 (EL0)

Change-Id: I5504bd1f59980f79b2607cce435ea09245de12e5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20249
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Change mcrMrc15TrapToHyp signature

This patch is moving MiscRegs reading inside the mcrMrc15TrapToHyp
helper function. Rather than passing registers as arguments,
we are just passing a ThreadContext pointer

Change-Id: I6636dd3a4f92f757479d8a8d2c47de050a0b9eae
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17988
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm,cpu: Add initial support for Arm SVE

This changeset adds initial support for the Arm Scalable Vector Extension
(SVE) by implementing:
- support for most data-processing instructions (no loads/stores yet);
- basic system-level support.

Additional authors:
- Javier Setoain <javier.setoain@arm.com>
- Gabor Dozsa <gabor.dozsa@arm.com>
- Giacomo Travaglini <giacomo.travaglini@arm.com>

Thanks to Pau Cabre for his contribution of bugfixes.

Change-Id: I1808b5ff55b401777eeb9b99c9a1129e0d527709
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13515
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Replace MiscReg with RegVal in utility.(hh|cc).

These uses snuck in after the previous pass which made this switch in
the rest of these files.

Change-Id: Ie891c6ec393a65f1c57c54301f0a2bb920d38bb0
Reviewed-on: https://gem5-review.googlesource.com/c/15795
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch-arm: Read VMPIDR instead of MPIDR when EL2 is Enabled

Trying to read MPIDR(_EL1) from EL1, should return the value of
VMPIDR_EL2 if EL2 is enabled. This patch is modifying the utility
function for reading MPIDR in order to match this behaviour for both
AArch32 and AArch64.

Change-Id: I32c2d4d5052f509e6e0542a5314844164221c6a3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15617
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Refactor AArch64 MSR/MRS trapping

This patch refactors AArch64 MSR/MRS trapping, by moving the trapping
helpers in arch/arm/utility and in the isa code into a MiscRegOp64
class.

This class is the Base class for a generic AArch64 instruction which is
making use of system registers (MiscReg), like MSR,MRS,SYS. The common
denominator or those instruction is the chance that the system register
access is trapped to an upper Exception level. MiscRegOp64 is providing
that feature.

What do we gain? Other "pseudo" instructions, like access to
implementation defined registers can inherit from this class to make use
of the trapping functionalities even if there is no data movement
between GPRs and system register.

Change-Id: I0924354db100de04f1079a1ab43d4fd32039e08d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13778
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Trap to EL2 only if not in Secure State

MRS/MSR Instructions should trap to EL2 only if we are in non-Secure
state since at the current implementation (Armv8.0) there is no Secure
EL2.

Change-Id: I93af415fbcbd19a470752adf6afc92e520e9645d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13777
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: BadMode checking if corresponding EL is implemented

The old utility function called badMode was only checking if the mode
passed as an argument was a recognized mode. It was not checking if the
corresponding mode/EL was implemented. That function has been renamed to
unknownMode and a new badMode has been introduced. This is used by the
cpsrWriteByInstruction function. In this way any try to change the
execution mode won't succeed if the mode hasn't been implemented.

Change-Id: Ibfe385c5465b904acc0d2eb9647710891d72c9df
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11196
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix big endian support in do{Long,L1,L2}Descriptor

do{Long,L1,L2}Descriptor was not able to load descriptors correctly
for big-endian situations, causing recognised Descriptors. Added
big-endian related data conversions to correct them.

Change-Id: I0fdfbbdf56f94bbed19172acae1b6e4a0382b5a0
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8144
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: ELUsingAArch32K from armarm pseudocode

This patch implements the ELUsingAArch32K pseudocode, which is returning
true if the provided Exception Level is using A32 ISA, but it is not
panicking (quitting simulation) if the information is unknown (see
documentation).
The panicking is the current behaviour of the ELIs32 utility in gem5.

Change-Id: Iad7b56077d7e0f8ee223b5b9593cb8097f26bb29
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7222
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: isSecureBelow from armarm pseudocode

This patch introduces the inSecureBelow pseudocode function
defined in the armarm documentation. It also replaces the
inSecureState function call which was improperly used in
ELIs32: we might be in secure state (EL3), but with non-secure
lower ELs (SCR.NS = 1).

Change-Id: I01febcb54392ad4e51e785b4d5153aeb3437c778
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Chuan Zhu <chuan.zhu@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7221
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix incorrect assumptions in ELIs64

The state of EL1 wasn't determined correctly when running in secure
mode if virtualisation was enabled. This changset updates the
implementation to match the canonical behavior from the ARM ARM.

Change-Id: I7ed6f5c003617773603f678667aac069d73b6f62
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7141
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>

misc: Rename misc.(hh|cc) to logging.(hh|cc)

These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).

Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

arm: Fix trapping to Hypervisor during MSR/MRS read/write

This patch restricts trapping to hypervisor only if we are in the
correct exception level for the trap to happen.

Change-Id: I0a382b6a572ef835ea36d2702b8a81b633bd3df0

arm: Rewrite ERET to behave according to the ARMv8 ARM

The ERET instruction doesn't set PSTATE correctly in some cases
(particularly when returning to aarch32 code). Among other things,
this breaks EL0 thumb code when using a 64-bit kernel. This changeset
updates the ERET implementation to match the ARM ARM.

Change-Id: I408e7c69a23cce437859313dfe84e68744b07c98
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>

arm: Correctly check FP/SIMD access permission in aarch32

The current implementation of aarch32 FP/SIMD in gem5 assumes that EL1
and higher are all 32-bit. This breaks interprocessing since an
aarch64 EL1 uses different enable/disable bits. This change updates
the permission checks to according to what is prescribed by the ARM
ARM.

Change-Id: Icdcef31b00644cfeebec00216b3993aa1de12b88
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Mitch Hayenga <mitch.hayenga@arm.com>
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>

arm: Make address translation faster with better caching

This patch adds better caching of the sys regs for AArch64, thus
avoiding unnecessary calls to tc->readMiscReg(MISCREG_CPSR) in the
non-faulting case.

arch: Use const StaticInstPtr references where possible

This patch optimises the passing of StaticInstPtr by avoiding copying
the reference-counting pointer. This avoids first incrementing and
then decrementing the reference-counting pointer.

alpha,arm,mips,power,x86,cpu,sim: Cleanup activate/deactivate

activate(), suspend(), and halt() used on thread contexts had an optional
delay parameter. However this parameter was often ignored. Also, when used,
the delay was seemily arbitrarily set to 0 or 1 cycle (no other delays were
ever specified). This patch removes the delay parameter and 'Events'
associated with them across all ISAs and cores. Unused activate logic
is also removed.

arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black

Clock: Add a Cycles wrapper class and use where applicable

This patch addresses the comments and feedback on the preceding patch
that reworks the clocks and now more clearly shows where cycles
(relative cycle counts) are used to express time.

Instead of bumping the existing patch I chose to make this a separate
patch, merely to try and focus the discussion around a smaller set of
changes. The two patches will be pushed together though.

This changes done as part of this patch are mostly following directly
from the introduction of the wrapper class, and change enough code to
make things compile and run again. There are definitely more places
where int/uint/Tick is still used to represent cycles, and it will
take some time to chase them all down. Similarly, a lot of parameters
should be changed from Param.Tick and Param.Unsigned to
Param.Cycles.

In addition, the use of curTick is questionable as there should not be
an absolute cycle. Potential solutions can be built on top of this
patch. There is a similar situation in the o3 CPU where
lastRunningCycle is currently counting in Cycles, and is still an
absolute time. More discussion to be had in other words.

An additional change that would be appropriate in the future is to
perform a similar wrapping of Tick and probably also introduce a
Ticks class along with suitable operators for all these classes.

gcc: Clean-up of non-C++0x compliant code, first steps

This patch cleans up a number of minor issues aiming to get closer to
compliance with the C++0x standard as interpreted by gcc and clang
(compile with std=c++0x and -pedantic-errors). In particular, the
patch cleans up enums where the last item was succeded by a comma,
namespaces closed by a curcly brace followed by a semi-colon, and the
use of the GNU-extension typeof (replaced by templated functions). It
does not address variable-length arrays, zero-size arrays, anonymous
structs, range expressions in switch statements, and the use of long
long. The generated CPU code also has a large number of issues that
remain to be fixed, mainly related to overflows in implicit constant
conversion (due to shifts).

ARM: Further break up condition code into NZ, C, V bits.

Break up the condition code bits into NZ, C, V registers. These are individually
written and this removes some incorrect dependencies between instructions.

Trace: Allow printing ASIDs and selectively tracing based on user/kernel code.

Debug flags are ExecUser, ExecKernel, and ExecAsid. ExecUser and
ExecKernel are set by default when Exec is specified. Use minus
sign with ExecUser or ExecKernel to remove user or kernel tracing
respectively.

ARM: Cleanup and small fixes to some NEON ops to match the spec.

Only certain bits of the cpacr can be written, some must be equal.
Mult instructions that write the same register should do something sane

Arm: Get rid of unused and incomplete setCp15Register and readCp15Register.

ARM: Add support for GDB on ARM

ARM: Make utility.hh meet style guidelines

ARM: Add support for switching CPUs

ISA,CPU,etc: Create an ISA defined PC type that abstracts out ISA behaviors.



This change is a low level and pervasive reorganization of how PCs are managed
in M5. Back when Alpha was the only ISA, there were only 2 PCs to worry about,
the PC and the NPC, and the lsb of the PC signaled whether or not you were in
PAL mode. As other ISAs were added, we had to add an NNPC, micro PC and next
micropc, x86 and ARM introduced variable length instruction sets, and ARM
started to keep track of mode bits in the PC. Each CPU model handled PCs in
its own custom way that needed to be updated individually to handle the new
dimensions of variability, or, in the case of ARMs mode-bit-in-the-pc hack,
the complexity could be hidden in the ISA at the ISA implementation's expense.
Areas like the branch predictor hadn't been updated to handle branch delay
slots or micropcs, and it turns out that had introduced a significant (10s of
percent) performance bug in SPARC and to a lesser extend MIPS. Rather than
perpetuate the problem by reworking O3 again to handle the PC features needed
by x86, this change was introduced to rework PC handling in a more modular,
transparent, and hopefully efficient way.


PC type:

Rather than having the superset of all possible elements of PC state declared
in each of the CPU models, each ISA defines its own PCState type which has
exactly the elements it needs. A cross product of canned PCState classes are
defined in the new "generic" ISA directory for ISAs with/without delay slots
and microcode. These are either typedef-ed or subclassed by each ISA. To read
or write this structure through a *Context, you use the new pcState() accessor
which reads or writes depending on whether it has an argument. If you just
want the address of the current or next instruction or the current micro PC,
you can get those through read-only accessors on either the PCState type or
the *Contexts. These are instAddr(), nextInstAddr(), and microPC(). Note the
move away from readPC. That name is ambiguous since it's not clear whether or
not it should be the actual address to fetch from, or if it should have extra
bits in it like the PAL mode bit. Each class is free to define its own
functions to get at whatever values it needs however it needs to to be used in
ISA specific code. Eventually Alpha's PAL mode bit could be moved out of the
PC and into a separate field like ARM.

These types can be reset to a particular pc (where npc = pc +
sizeof(MachInst), nnpc = npc + sizeof(MachInst), upc = 0, nupc = 1 as
appropriate), printed, serialized, and compared. There is a branching()
function which encapsulates code in the CPU models that checked if an
instruction branched or not. Exactly what that means in the context of branch
delay slots which can skip an instruction when not taken is ambiguous, and
ideally this function and its uses can be eliminated. PCStates also generally
know how to advance themselves in various ways depending on if they point at
an instruction, a microop, or the last microop of a macroop. More on that
later.

Ideally, accessing all the PCs at once when setting them will improve
performance of M5 even though more data needs to be moved around. This is
because often all the PCs need to be manipulated together, and by getting them
all at once you avoid multiple function calls. Also, the PCs of a particular
thread will have spatial locality in the cache. Previously they were grouped
by element in arrays which spread out accesses.


Advancing the PC:

The PCs were previously managed entirely by the CPU which had to know about PC
semantics, try to figure out which dimension to increment the PC in, what to
set NPC/NNPC, etc. These decisions are best left to the ISA in conjunction
with the PC type itself. Because most of the information about how to
increment the PC (mainly what type of instruction it refers to) is contained
in the instruction object, a new advancePC virtual function was added to the
StaticInst class. Subclasses provide an implementation that moves around the
right element of the PC with a minimal amount of decision making. In ISAs like
Alpha, the instructions always simply assign NPC to PC without having to worry
about micropcs, nnpcs, etc. The added cost of a virtual function call should
be outweighed by not having to figure out as much about what to do with the
PCs and mucking around with the extra elements.

One drawback of making the StaticInsts advance the PC is that you have to
actually have one to advance the PC. This would, superficially, seem to
require decoding an instruction before fetch could advance. This is, as far as
I can tell, realistic. fetch would advance through memory addresses, not PCs,
perhaps predicting new memory addresses using existing ones. More
sophisticated decisions about control flow would be made later on, after the
instruction was decoded, and handed back to fetch. If branching needs to
happen, some amount of decoding needs to happen to see that it's a branch,
what the target is, etc. This could get a little more complicated if that gets
done by the predecoder, but I'm choosing to ignore that for now.


Variable length instructions:

To handle variable length instructions in x86 and ARM, the predecoder now
takes in the current PC by reference to the getExtMachInst function. It can
modify the PC however it needs to (by setting NPC to be the PC + instruction
length, for instance). This could be improved since the CPU doesn't know if
the PC was modified and always has to write it back.


ISA parser:

To support the new API, all PC related operand types were removed from the
parser and replaced with a PCState type. There are two warts on this
implementation. First, as with all the other operand types, the PCState still
has to have a valid operand type even though it doesn't use it. Second, using
syntax like PCS.npc(target) doesn't work for two reasons, this looks like the
syntax for operand type overriding, and the parser can't figure out if you're
reading or writing. Instructions that use the PCS operand (which I've
consistently called it) need to first read it into a local variable,
manipulate it, and then write it back out.


Return address stack:

The return address stack needed a little extra help because, in the presence
of branch delay slots, it has to merge together elements of the return PC and
the call PC. To handle that, a buildRetPC utility function was added. There
are basically only two versions in all the ISAs, but it didn't seem short
enough to put into the generic ISA directory. Also, the branch predictor code
in O3 and InOrder were adjusted so that they always store the PC of the actual
call instruction in the RAS, not the next PC. If the call instruction is a
microop, the next PC refers to the next microop in the same macroop which is
probably not desirable. The buildRetPC function advances the PC intelligently
to the next macroop (in an ISA specific way) so that that case works.


Change in stats:

There were no change in stats except in MIPS and SPARC in the O3 model. MIPS
runs in about 9% fewer ticks. SPARC runs with 30%-50% fewer ticks, which could
likely be improved further by setting call/return instruction flags and taking
advantage of the RAS.


TODO:

Add != operators to the PCState classes, defined trivially to be !(a==b).
Smooth out places where PCs are split apart, passed around, and put back
together later. I think this might happen in SPARC's fault code. Add ISA
specific constructors that allow setting PC elements without calling a bunch
of accessors. Try to eliminate the need for the branching() function. Factor
out Alpha's PAL mode pc bit into a separate flag field, and eliminate places
where it's blindly masked out or tested in the PC.

GetArgument: Rework getArgument so that X86_FS compiles again.

When no size is specified for an argument, push the decision about what size
to use into the ISA by passing a size of -1.

Debug: Implement getArgument() and function skipping for ARM.

In the process make add skipFuction() to handle isa specific function skipping
instead of ifdefs and other ugliness. For almost all ABIs, 64 bit arguments can
only start in even registers. Size is now passed to getArgument() so that 32
bit systems can make decisions about register selection for 64 bit arguments.
The number argument is now passed by reference because getArgument() will need
to change it based on the size of the argument and the current argument number.

For ARM, if the argument number is odd and a 64-bit register is requested the
number must first be incremented to because all 64 bit arguments are passed
in an even argument register. Then the number will be incremented again to
access both halves of the argument.

ARM: Clean up use of TBit and JBit.

Rather tha constantly using ULL(1) << PcXBitShift define those directly.
Additionally, add some helper functions to further clean up the code.

CPU: Trim unnecessary includes from some common files.

This reduces the scope of those includes and makes it less likely for there to
be a dependency loop. This also moves the hashing functions associated with
ExtMachInst objects to be with the ExtMachInst definitions and out of
utility.hh.

Faults: Pass the StaticInst involved, if any, to a Fault's invoke method.

Also move the "Fault" reference counted pointer type into a separate file,
sim/fault.hh. It would be better to name this less similarly to sim/faults.hh
to reduce confusion, but fault.hh matches the name of the type. We could change
Fault to FaultPtr to match other pointer types, and then changing the name of
the file would make more sense.

ARM: Get rid of the checkFpEnableFault function in ARM.

ARM: Fix VFP enabled checks for mem instructions

ARM: Implement CPACR register and return Undefined Instruction when FP access is disabled.

ARM: Expand the mode checking utility functions.

inUserMode now can take either a threadcontext or a CPSR value directly. If
given a thread context it just extracts the CPSR and calls the other version.
An inPrivelegedMode function was also implemented which just returns the
opposite of inUserMode.

ISA: Get rid of old, unused utility functions cluttering up the ISAs.

ARM: Get rid of the binary dumping function in utility.hh.

ARM: Implement support for the IT instruction and the ITSTATE bits of CPSR.

ARM: Rework how unrecognized/unimplemented instructions are handled.

Instead of panic immediately when these instructions are executed, an
UndefinedInstruction fault is returned. In FS mode (not currently
implemented), this is the fault that should, to my knowledge, be triggered in
these situations and should be handled using the normal architected
mechanisms. In SE mode, the fault causes a panic when it's invoked that gives
the same information as the instruction did. When/if support for speculative
execution of ARM is supported, this will allow a mispeculated and unrecognized
and/or unimplemented instruction from causing a panic. Only once the
instruction is going to be committed will the fault be invoked, triggering the
panic.

ARM: Replace the "never" condition with the "unconditional" condition.

ARM: Begin implementing CP15

ARM: Boilerplate full-system code.

Registers: Add a registers.hh file as an ISA switched header.
This file is for register indices, Num* constants, and register types.
copyRegs and copyMiscRegs were moved to utility.hh and utility.cc.

ARM: Make inst bitfields accessible outside of the isa desc.

ARM: Clear out some inherited hangers on in util.isa and utility.hh.

ARM: Pull some static code out of the isa desc and create miscregs.hh.

includes: sort includes again

types: Move stuff for global types into src/base/types.hh

arm: add ARM support to M5