Searched hist:2014 (Results 1501 - 1525 of 1681) sorted by relevance

<<6162636465666768

/gem5/src/cpu/
H A Dexec_context.hh10529:05b5a6cf3521 Thu Nov 06 06:42:00 EST 2014 Marc Orr <morr@cs.wisc.edu> x86 isa: This patch attempts an implementation at mwait.

Mwait works as follows:
1. A cpu monitors an address of interest (monitor instruction)
2. A cpu calls mwait - this loads the cache line into that cpu's cache.
3. The cpu goes to sleep.
4. When another processor requests write permission for the line, it is
evicted from the sleeping cpu's cache. This eviction is forwarded to the
sleeping cpu, which then wakes up.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
10474:799c8ee4ecba Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use shared_ptr for all Faults

This patch takes quite a large step in transitioning from the ad-hoc
RefCountingPtr to the c++11 shared_ptr by adopting its use for all
Faults. There are no changes in behaviour, and the code modifications
are mostly just replacing "new" with "make_shared".
10319:4207f9bfcceb Wed Sep 03 07:42:00 EDT 2014 Andreas Sandberg <Andreas.Sandberg@ARM.com> arch, cpu: Factor out the ExecContext into a proper base class

We currently generate and compile one version of the ISA code per CPU
model. This is obviously wasting a lot of resources at compile
time. This changeset factors out the interface into a separate
ExecContext class, which also serves as documentation for the
interface between CPUs and the ISA code. While doing so, this
changeset also fixes up interface inconsistencies between the
different CPU models.

The main argument for using one set of ISA code per CPU model has
always been performance as this avoid indirect branches in the
generated code. However, this argument does not hold water. Booting
Linux on a simulated ARM system running in atomic mode
(opt/10.linux-boot/realview-simple-atomic) is actually 2% faster
(compiled using clang 3.4) after applying this patch. Additionally,
compilation time is decreased by 35%.
/gem5/src/cpu/o3/
H A DSConscript10426:cba563d00376 Thu Oct 09 17:51:00 EDT 2014 Mitch Hayenga <mitch.hayenga@arm.com> cpu: Remove Ozone CPU from the source tree

The Ozone CPU is now very much out of date and completely
non-functional, with no one actively working on restoring it. It is a
source of confusion for new users who attempt to use it before
realizing its current state. RIP
H A Dscoreboard.hh10104:ff709c429b7b Fri Mar 07 15:56:00 EST 2014 Mitch Hayenga <mitch.hayenga@arm.com> scons: Fixes uninitialized warnings issued by clang

Small fixes to appease recent clang versions.
H A Drename_map.hh10537:47fe87b0cf97 Fri Nov 14 03:53:00 EST 2014 Andreas Hansson <andreas.hansson@arm.com> arm: Fixes based on UBSan and static analysis

Another churn to clean up undefined behaviour, mostly ARM, but some
parts also touching the generic part of the code base.

Most of the fixes are simply ensuring that proper intialisation. One
of the more subtle changes is the return type of the sign-extension,
which is changed to uint64_t. This is to avoid shifting negative
values (undefined behaviour) in the ISA code.
/gem5/tests/configs/
H A Do3-timing-ruby.py10405:7a618c07e663 Sat Sep 20 17:18:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Rename Bus to XBar to better reflect its behaviour

This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.

As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.
H A Drealview-o3-dual.py10336:60dddc0a6f78 Wed Sep 03 07:42:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> tests: Use O3_ARM_v7a config for full-system ARM regressions

This patch changes the CPU configuration used for the full-system ARM
regressions to increase the test coverage. Note that it is only the
core configuration, and not the caches etc.
H A Drealview-o3.py10336:60dddc0a6f78 Wed Sep 03 07:42:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> tests: Use O3_ARM_v7a config for full-system ARM regressions

This patch changes the CPU configuration used for the full-system ARM
regressions to increase the test coverage. Note that it is only the
core configuration, and not the caches etc.
H A Do3-timing-mp-ruby.py10405:7a618c07e663 Sat Sep 20 17:18:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Rename Bus to XBar to better reflect its behaviour

This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.

As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.
/gem5/src/sim/
H A Dstat_control.cc10367:bf52480abd01 Fri Sep 12 10:22:00 EDT 2014 Andrew Bardsley <Andrew.Bardsley@arm.com> style: Fix line continuation, especially in debug messages

This patch closes a number of space gaps in debug messages caused by
the incorrect use of line continuation within strings. (There's also
one consistency change to a similar, but correct, use of line
continuation)
/gem5/src/arch/alpha/
H A DSConscript10196:be0e1724eb39 Fri May 09 18:58:00 EDT 2014 Curtis Dunham <Curtis.Dunham@arm.com> arch: teach ISA parser how to split code across files

This patch encompasses several interrelated and interdependent changes
to the ISA generation step. The end goal is to reduce the size of the
generated compilation units for instruction execution and decoding so
that batch compilation can proceed with all CPUs active without
exhausting physical memory.

The ISA parser (src/arch/isa_parser.py) has been improved so that it can
accept 'split [output_type];' directives at the top level of the grammar
and 'split(output_type)' python calls within 'exec {{ ... }}' blocks.
This has the effect of "splitting" the files into smaller compilation
units. I use air-quotes around "splitting" because the files themselves
are not split, but preprocessing directives are inserted to have the same
effect.

Architecturally, the ISA parser has had some changes in how it works.
In general, it emits code sooner. It doesn't generate per-CPU files,
and instead defers to the C preprocessor to create the duplicate copies
for each CPU type. Likewise there are more files emitted and the C
preprocessor does more substitution that used to be done by the ISA parser.

Finally, the build system (SCons) needs to be able to cope with a
dynamic list of source files coming out of the ISA parser. The changes
to the SCons{cript,truct} files support this. In broad strokes, the
targets requested on the command line are hidden from SCons until all
the build dependencies are determined, otherwise it would try, realize
it can't reach the goal, and terminate in failure. Since build steps
(i.e. running the ISA parser) must be taken to determine the file list,
several new build stages have been inserted at the very start of the
build. First, the build dependencies from the ISA parser will be emitted
to arch/$ISA/generated/inc.d, which is then read by a new SCons builder
to finalize the dependencies. (Once inc.d exists, the ISA parser will not
need to be run to complete this step.) Once the dependencies are known,
the 'Environments' are made by the makeEnv() function. This function used
to be called before the build began but now happens during the build.
It is easy to see that this step is quite slow; this is a known issue
and it's important to realize that it was already slow, but there was
no obvious cause to attribute it to since nothing was displayed to the
terminal. Since new steps that used to be performed serially are now in a
potentially-parallel build phase, the pathname handling in the SCons scripts
has been tightened up to deal with chdir() race conditions. In general,
pathnames are computed earlier and more likely to be stored, passed around,
and processed as absolute paths rather than relative paths. In the end,
some of these issues had to be fixed by inserting serializing dependencies
in the build.

Minor note:
For the null ISA, we just provide a dummy inc.d so SCons is never
compelled to try to generate it. While it seems slightly wrong to have
anything in src/arch/*/generated (i.e. a non-generated 'generated' file),
it's by far the simplest solution.
H A Dprocess.hh10299:bec0c5ffc323 Thu Aug 28 11:11:00 EDT 2014 Alexandru <alexandru.dutu@amd.com> mem: adding architectural page table support for SE mode
This patch enables the use of page tables that are stored in system memory
and respect x86 specification, in SE mode. It defines an architectural
page table for x86 as a MultiLevelPageTable class and puts a placeholder
class for other ISAs page tables, giving the possibility for future
implementation.
/gem5/src/arch/x86/
H A Dfaults.hh10417:710ee116eb68 Sat Sep 27 09:08:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use const StaticInstPtr references where possible

This patch optimises the passing of StaticInstPtr by avoiding copying
the reference-counting pointer. This avoids first incrementing and
then decrementing the reference-counting pointer.
H A Dprocess.cc10590:ad9146bb5598 Wed Dec 03 01:01:00 EST 2014 Gabe Black <gabeblack@google.com> x86: Clean up style in process.cc.
10554:fe2e2f06a7c8 Sun Nov 23 21:01:00 EST 2014 Alexandru Dutu <alexandru.dutu@amd.com> x86: Segment initialization to support KvmCPU in SE
This patch sets up low and high privilege code and data segments and places them
in the following order: cs low, ds low, ds, cs, in the GDT. Additionally, a
syscall and page fault handler for KvmCPU in SE mode are defined. The order of
the segment selectors in GDT is required in this manner for interrupt handling
to work properly. Segment initialization is done for all the thread
contexts.
10318:98771a936b61 Wed Sep 03 07:42:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Cleanup unused ISA traits constants

This patch prunes unused values, and also unifies how the values are
defined (not using an enum for ALPHA), aligning the use of int vs Addr
etc.

The patch also removes the duplication of PageBytes/PageShift and
VMPageSize/LogVMPageSize. For all ISAs the two pairs had identical
values and the latter has been removed.
10223:34f48d0dac97 Mon May 12 17:23:00 EDT 2014 Steve Reinhardt <steve.reinhardt@amd.com> syscall emulation: clean up & comment SyscallReturn
/gem5/src/base/
H A Drandom.cc10349:939094c17866 Wed Sep 03 07:42:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> base: Use STL C++11 random number generation

This patch changes the random number generator from the in-house
Mersenne twister to an implementation relying entirely on C++11 STL.

The format for the checkpointing of the twister is simplified. As the
functionality was never used this should not matter. Note that this
patch does not actually make use of the checkpointing
functionality. As the random number generator is not thread safe, it
may be sensible to create one generator per thread, system, or even
object. Until this is decided the status quo is maintained in that no
generator state is part of the checkpoint.
/gem5/src/arch/mips/isa/formats/
H A Dnoop.isa10196:be0e1724eb39 Fri May 09 18:58:00 EDT 2014 Curtis Dunham <Curtis.Dunham@arm.com> arch: teach ISA parser how to split code across files

This patch encompasses several interrelated and interdependent changes
to the ISA generation step. The end goal is to reduce the size of the
generated compilation units for instruction execution and decoding so
that batch compilation can proceed with all CPUs active without
exhausting physical memory.

The ISA parser (src/arch/isa_parser.py) has been improved so that it can
accept 'split [output_type];' directives at the top level of the grammar
and 'split(output_type)' python calls within 'exec {{ ... }}' blocks.
This has the effect of "splitting" the files into smaller compilation
units. I use air-quotes around "splitting" because the files themselves
are not split, but preprocessing directives are inserted to have the same
effect.

Architecturally, the ISA parser has had some changes in how it works.
In general, it emits code sooner. It doesn't generate per-CPU files,
and instead defers to the C preprocessor to create the duplicate copies
for each CPU type. Likewise there are more files emitted and the C
preprocessor does more substitution that used to be done by the ISA parser.

Finally, the build system (SCons) needs to be able to cope with a
dynamic list of source files coming out of the ISA parser. The changes
to the SCons{cript,truct} files support this. In broad strokes, the
targets requested on the command line are hidden from SCons until all
the build dependencies are determined, otherwise it would try, realize
it can't reach the goal, and terminate in failure. Since build steps
(i.e. running the ISA parser) must be taken to determine the file list,
several new build stages have been inserted at the very start of the
build. First, the build dependencies from the ISA parser will be emitted
to arch/$ISA/generated/inc.d, which is then read by a new SCons builder
to finalize the dependencies. (Once inc.d exists, the ISA parser will not
need to be run to complete this step.) Once the dependencies are known,
the 'Environments' are made by the makeEnv() function. This function used
to be called before the build began but now happens during the build.
It is easy to see that this step is quite slow; this is a known issue
and it's important to realize that it was already slow, but there was
no obvious cause to attribute it to since nothing was displayed to the
terminal. Since new steps that used to be performed serially are now in a
potentially-parallel build phase, the pathname handling in the SCons scripts
has been tightened up to deal with chdir() race conditions. In general,
pathnames are computed earlier and more likely to be stored, passed around,
and processed as absolute paths rather than relative paths. In the end,
some of these issues had to be fixed by inserting serializing dependencies
in the build.

Minor note:
For the null ISA, we just provide a dummy inc.d so SCons is never
compelled to try to generate it. While it seems slightly wrong to have
anything in src/arch/*/generated (i.e. a non-generated 'generated' file),
it's by far the simplest solution.
/gem5/src/dev/alpha/
H A Dtsunami_cchip.cc10565:23593fdaadcd Tue Dec 02 06:07:00 EST 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Remove redundant Packet::allocate calls

This patch cleans up the packet memory allocation confusion. The data
is always allocated at the requesting side, when a packet is created
(or copied), and there is never a need for any device to allocate any
space if it is merely responding to a paket. This behaviour is in line
with how SystemC and TLM works as well, thus increasing
interoperability, and matching established conventions.

The redundant calls to Packet::allocate are removed, and the checks in
the function are tightened up to make sure data is only ever allocated
once. There are still some oddities in the packet copy constructor
where we copy the data pointer if it is static (without ownership),
and allocate new space if the data is dynamic (with ownership). The
latter is being worked on further in a follow-on patch.
H A Dtsunami_io.cc10565:23593fdaadcd Tue Dec 02 06:07:00 EST 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Remove redundant Packet::allocate calls

This patch cleans up the packet memory allocation confusion. The data
is always allocated at the requesting side, when a packet is created
(or copied), and there is never a need for any device to allocate any
space if it is merely responding to a paket. This behaviour is in line
with how SystemC and TLM works as well, thus increasing
interoperability, and matching established conventions.

The redundant calls to Packet::allocate are removed, and the checks in
the function are tightened up to make sure data is only ever allocated
once. There are still some oddities in the packet copy constructor
where we copy the data pointer if it is static (without ownership),
and allocate new space if the data is dynamic (with ownership). The
latter is being worked on further in a follow-on patch.
/gem5/configs/splash2/
H A Drun.py10405:7a618c07e663 Sat Sep 20 17:18:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Rename Bus to XBar to better reflect its behaviour

This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.

As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.
H A Dcluster.py10405:7a618c07e663 Sat Sep 20 17:18:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Rename Bus to XBar to better reflect its behaviour

This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.

As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.
/gem5/src/arch/arm/isa/formats/
H A Dmem.isa10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
/gem5/src/dev/arm/
H A Dgeneric_timer.hh10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
H A Dpl011.cc10565:23593fdaadcd Tue Dec 02 06:07:00 EST 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Remove redundant Packet::allocate calls

This patch cleans up the packet memory allocation confusion. The data
is always allocated at the requesting side, when a packet is created
(or copied), and there is never a need for any device to allocate any
space if it is merely responding to a paket. This behaviour is in line
with how SystemC and TLM works as well, thus increasing
interoperability, and matching established conventions.

The redundant calls to Packet::allocate are removed, and the checks in
the function are tightened up to make sure data is only ever allocated
once. There are still some oddities in the packet copy constructor
where we copy the data pointer if it is static (without ownership),
and allocate new space if the data is dynamic (with ownership). The
latter is being worked on further in a follow-on patch.
/gem5/src/kern/linux/
H A Dlinux.hh10027:532929273927 Fri Jan 24 16:29:00 EST 2014 Chris Adeniyi-Jones <Chris.Adeniyi-Jones@arm.com> sim: Add openat/fstatat syscalls and fix mremap

This patch adds support for the openat and fstatat syscalls and
broadens the support for mremap to make it work on OS X.
/gem5/util/
H A Dregress10007:94d286db85c1 Sat Jan 04 01:03:00 EST 2014 Nilay Vaish <nilay@cs.wisc.edu> ruby: rename MESI_CMP_directory to MESI_Two_Level

This is because the next patch introduces a three level hierarchy.
/gem5/src/arch/sparc/
H A Dinterrupts.hh10474:799c8ee4ecba Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use shared_ptr for all Faults

This patch takes quite a large step in transitioning from the ad-hoc
RefCountingPtr to the c++11 shared_ptr by adopting its use for all
Faults. There are no changes in behaviour, and the code modifications
are mostly just replacing "new" with "make_shared".

Completed in 190 milliseconds

<<6162636465666768