Searched hist:5 (Results 401 - 425 of 1055) sorted by relevance

<<11121314151617181920>>

/gem5/src/arch/arm/insts/
H A Dmisc.hhdiff 10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
diff 7261:5ed14bce7261 Wed Jun 02 01:58:00 EDT 2010 Gabe Black <gblack@eecs.umich.edu> ARM: Rename the RevOp base class to something more generic.
H A Dmem64.hhdiff 14240:5b9499c2ae14 Fri Aug 30 09:31:00 EDT 2019 Giacomo Travaglini <giacomo.travaglini@arm.com> arch-arm: SySDC64 Instructions (CMO) using MiscRegIndex

Change-Id: Ia66d6abf965b1d33579e8fa048608d99c93ff2ce
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20621
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
/gem5/src/arch/arm/isa/formats/
H A Dformats.isadiff 10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
diff 7117:5d18ca349ca1 Wed Jun 02 01:58:00 EDT 2010 Gabe Black <gblack@eecs.umich.edu> ARM: Create a "decoder" directory for the files implementing the decoder.
/gem5/src/arch/riscv/
H A Dinterrupts.hh11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Disa.cc11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Dremote_gdb.cc11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Dremote_gdb.hh11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
/gem5/src/base/
H A Dinet.ccdiff 9955:5d8722ab804b Thu Oct 31 14:41:00 EDT 2013 Geoffrey Blake <Geoffrey.Blake@arm.com> base: Add support for ipv6 into inet.hh/inet.cc
diff 8607:5fb918115c07 Mon Oct 31 04:09:00 EDT 2011 Gabe Black <gblack@eecs.umich.edu> GCC: Get everything working with gcc 4.6.1.

And by "everything" I mean all the quick regressions.
/gem5/src/dev/arm/
H A Dvgic.hhdiff 11174:5a9019db4a08 Fri Oct 23 09:51:00 EDT 2015 Andreas Hansson <andreas.hansson@arm.com> arm: Add missing explicit overrides for ARM devices

Make clang >= 3.5 happy when compiling build/ARM/gem5.opt on OSX.
10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
H A DSConscriptdiff 12740:beed0805c651 Mon Nov 07 13:21:00 EST 2016 Andreas Sandberg <andreas.sandberg@arm.com> dev-arm: Add a MMIO transport interface for VirtIO

The MMIO interface currently only supports a subset of version 0.9.5
of the VirtIO specification. It has the following known limitations:

* The queue size hint (the QUEUE_NUM register) is ignored.

* Queue alignment is assumed to be hard-coded to
VirtQueue::ALIGN_SIZE (4096 bytes).

* Only 4096 byte pages are currently supported.

Change-Id: Ifd318f5e5bddab0b6a42d8c8af9ff2fbb477f98b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
diff 10916:5c76426fd9ee Tue Jul 07 05:03:00 EDT 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev, arm: Add a device model that uses the NoMali model

Add a simple device shim that interfaces with the NoMali model
library. The gem5 side of the interface supports Mali T60x/T62x/T760
GPUs. This device model pretends to be a Mali GPU, but doesn't render
anything and executes in zero time.
diff 10396:5eede8466691 Sat Sep 20 17:18:00 EDT 2014 Akash Bagdia <akash.bagdia@arm.com> energy: Memory-mapped Energy Controller component

This patch provides an Energy Controller device that provides software
(driver) access to a DVFS handler. The device is currently residing in
the dev/arm tree, but there is nothing inherently ARM specific in the
behaviour. It is currently only tested and supported for ARM Linux,
hence the location.
diff 10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
diff 7090:5f64c5048fbd Wed Jun 02 01:57:00 EDT 2010 Ali Saidi <Ali.Saidi@ARM.com> ARM: Adjust some copyrights
/gem5/src/dev/net/
H A Dethertap.ccdiff 12130:5e0dd4d7b730 Wed Jun 28 12:18:00 EDT 2017 Sean Wilson <spwilson2@wisc.edu> net: Refactor some Event subclasses to lambdas

Change-Id: I0e23f1529b26c36d749bf5211ee8623744d0b10f
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3927
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
diff 11701:5e7599457b97 Wed Oct 26 22:48:00 EDT 2016 mlebeane <michael.lebeane@amd.com> dev: Add 'simLength' parameter in EthPacketData
Currently, all the network devices create a 16K buffer for the 'data' field
in EthPacketData, and use 'length' to keep track of the size of the packet
in the buffer. This patch introduces the 'simLength' parameter to
EthPacketData, which is used to hold the effective length of the packet used
for all timing calulations in the simulator. Serialization is performed using
only the useful data in the packet ('length') and not necessarily the entire
original buffer.
/gem5/src/arch/arm/isa/templates/
H A Dtemplates.isadiff 10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
7119:5ad962dec52f Wed Jun 02 01:58:00 EDT 2010 Gabe Black <gblack@eecs.umich.edu> ARM: Define the load instructions from outside the decoder.
/gem5/src/cpu/minor/
H A Ddyn_inst.ccdiff 10935:acd48ddd725f Tue Jul 28 02:58:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> revert 5af8f40d8f2c
diff 10934:5af8f40d8f2c Sun Jul 26 11:21:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> cpu: implements vector registers

This adds a vector register type. The type is defined as a std::array of a
fixed number of uint64_ts. The isa_parser.py has been modified to parse vector
register operands and generate the required code. Different cpus have vector
register files now.
/gem5/src/arch/x86/isa/insts/general_purpose/data_transfer/
H A Dmove.pydiff 5927:5e3367b103da Wed Feb 25 13:20:00 EST 2009 Gabe Black <gblack@eecs.umich.edu> X86: Do a merge for the zero extension microop.
diff 5296:5caa774215cd Sun Dec 02 02:06:00 EST 2007 Gabe Black <gblack@eecs.umich.edu> X86: Implement mov from control register.
/gem5/src/arch/x86/isa/
H A Dmicroasm.isadiff 5428:5a27fea50fee Thu Jun 12 00:50:00 EDT 2008 Gabe Black <gblack@eecs.umich.edu> X86: Change what the microop chks does.
Instead of computing the segment descriptor address, this now checks if a
selector value/descriptor are legal for a particular purpose.
diff 5291:5d38610cff05 Sun Dec 02 02:01:00 EST 2007 Gabe Black <gblack@eecs.umich.edu> X86: Implement the lgdt instruction.
diff 4620:5acc50eeacf7 Thu Jun 21 16:35:00 EDT 2007 Gabe Black <gblack@eecs.umich.edu> Make symbols for regular registers.
diff 4348:5c21bdb46e6d Fri Apr 06 12:55:00 EDT 2007 Gabe Black <gblack@eecs.umich.edu> Move the instruction specialization stuff out of the microassembler file, and added some comments to main.isa
diff 4338:24d31b35bcf9 Wed Apr 04 19:35:00 EDT 2007 Gabe Black <gblack@eecs.umich.edu> The process of going from an instruction definition to an instruction to be returned by the decoder has been fleshed out more. The following steps describe how an instruction implementation becomes a StaticInst.

1. Microops are created. These are StaticInsts use templates to provide a basic form of polymorphism without having to make the microassembler smarter.
2. An instruction class is created which has a "templated" microcode program as it's docstring. The template parameters are refernced with ^ following by a number.
3. An instruction in the decoder references an instruction template using it's mnemonic. The parameters to it's format end up replacing the placeholders. These parameters describe a source for an operand which could be memory, a register, or an immediate. It it's a register, the register index is used. If it's memory, eventually a load/store will be pre/postpended to the instruction template and it's destination register will be used in place of the ^. If it's an immediate, the immediate is used. Some operand types, specifically those that come from the ModRM byte, need to be decoded further into memory vs. register versions. This is accomplished by making the decode_block text for these instructions another case statement based off ModRM.
4. Once all of the template parameters have been handled, the instruction goes throw the microcode assembler which resolves labels and creates a list of python op objects. If an operand is a register, it uses a % prefix, an immediate uses $, and a label uses @. If the operand is just letters, numbers, and underscores, it can appear immediately after the prefix. If it's not, it can be encolsed in non nested {}s.
5. If there is a single "op" object (which corresponds to a single microop) the decoder is set up to return it directly. If not, a macroop wrapper is created around it.

In the future, I'm considering seperating the operand type specialization from the template substitution step. A problem this introduces is that either the template arguments need to be kept around for the specialization step, or they need to be re-extracted. Re-extraction might be the way to go so that the operand formats can be coded directly into the micro assembler template without having to pass them in as parameters. I don't know if that's actually useful, though.

src/arch/x86/isa/decoder/one_byte_opcodes.isa:
src/arch/x86/isa/microasm.isa:
src/arch/x86/isa/microops/microops.isa:
src/arch/x86/isa/operands.isa:
src/arch/x86/isa/microops/base.isa:
Implemented polymorphic microops and changed around the microcode assembler syntax.
/gem5/src/arch/mips/
H A Dtlb.ccdiff 10280:5b67e1bdf6ad Wed Aug 13 06:57:00 EDT 2014 Andreas Sandberg <Andreas.Sandberg@ARM.com> mips: Remove unused private members to fix compile-time warning

Certain versions of clang complain about unused private members if
they are not used. This changeset removes such members from the
MIPS-specific classes to silence the warning.
diff 8607:5fb918115c07 Mon Oct 31 04:09:00 EDT 2011 Gabe Black <gblack@eecs.umich.edu> GCC: Get everything working with gcc 4.6.1.

And by "everything" I mean all the quick regressions.
diff 7461:5a07045d0af2 Tue Jun 15 04:18:00 EDT 2010 Nathan Binkert <nate@binkert.org> stats: only consider a formula initialized if there is a formula
diff 6329:5d8b91875859 Thu Jul 09 02:02:00 EDT 2009 Gabe Black <gblack@eecs.umich.edu> Registers: Add a registers.hh file as an ISA switched header.
This file is for register indices, Num* constants, and register types.
copyRegs and copyMiscRegs were moved to utility.hh and utility.cc.
diff 5268:5bfc53fe60e7 Fri Nov 16 21:32:00 EST 2007 Korey Sewell <ksewell@umich.edu> go back and fix up MIPS copyright headers
H A Dtlb.hhdiff 10194:e6d2e8083d9c Fri May 09 18:58:00 EDT 2014 Geoffrey Blake <Geoffrey.Blake@arm.com> arch, arm: Preserve TLB bootUncacheability when switching CPUs

The ARM TLBs have a bootUncacheability flag used to make some loads
and stores become uncacheable when booting in FS mode. Later the
flag is cleared to let those loads and stores operate as normal. When
doing a takeOverFrom(), this flag's state is not preserved and is
momentarily reset until the CPSR is touched. On single core runs this
is a non-issue. On multi-core runs this can lead to crashes on the O3
CPU model from the following series of events:
1) takeOverFrom executed to switch from Atomic -> O3
2) All bootUncacheability flags are reset to true
3) Core2 tries to execute a load covered by bootUncacheability, it
is flagged as uncacheable
4) Core2's load needs to replay due to a pipeline flush
3) Core1 core does an action on CPSR
4) The handling code for CPSR then checks all other cores
to determine if bootUncacheability can be set to false
5) Asynchronously set bootUncacheability on all cores to false
6) Core2 replays load previously set as uncacheable and notices
it is now flagged as cacheable, leads to a panic.
This patch implements takeOverFrom() functionality for the ARM TLBs
to preserve flag values when switching from atomic -> detailed.
diff 7461:5a07045d0af2 Tue Jun 15 04:18:00 EDT 2010 Nathan Binkert <nate@binkert.org> stats: only consider a formula initialized if there is a formula
diff 5268:5bfc53fe60e7 Fri Nov 16 21:32:00 EST 2007 Korey Sewell <ksewell@umich.edu> go back and fix up MIPS copyright headers
/gem5/src/cpu/o3/
H A DO3CPU.pydiff 13710:5ba1d8066ef0 Mon Jun 25 11:59:00 EDT 2018 Gabor Dozsa <gabor.dozsa@arm.com> cpu-o3: Add cache read ports limit to LSQ

This change introduces cache read ports to limit the number of
per-cycle loads. Previously only the number of per-cycle stores
could be limited.

Change-Id: I39bbd984056c5a696725ee2db462a55b2079e2d4
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13517
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
diff 13610:5d5404ac6288 Tue Oct 16 11:04:00 EDT 2018 Giacomo Gabrielli <giacomo.gabrielli@arm.com> arch,cpu: Add vector predicate registers

Latest-gen. vector/SIMD extensions, including the Arm Scalable Vector
Extension (SVE), introduce the notion of a predicate register file.
This changeset adds this feature across architectures and CPU models.

Change-Id: Iebcadbad89c0a582ff8b1b70de353305db603946
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13715
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
diff 13559:e9983a972327 Thu Jan 03 12:45:00 EST 2019 Nikos Nikoleris <nikos.nikoleris@arm.com> cpu-o3: Make the smtFetchPolicy a Param.ScopedEnum

The smtFetchPolicy is a parameter in the o3 cpu that can have 5
different values. Previously this setting was done through a string
and a parser function would turn it into a c++ enum value. This
changeset turns the string into a python Param.ScopedEnum.

Change-Id: Iafb4b4b27587541185ea912e5ed581bce09695f5
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15396
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
diff 10935:acd48ddd725f Tue Jul 28 02:58:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> revert 5af8f40d8f2c
diff 10934:5af8f40d8f2c Sun Jul 26 11:21:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> cpu: implements vector registers

This adds a vector register type. The type is defined as a std::array of a
fixed number of uint64_ts. The isa_parser.py has been modified to parse vector
register operands and generate the required code. Different cpus have vector
register files now.
diff 10327:5b6279635c49 Wed Sep 03 07:42:00 EDT 2014 Mitch Hayenga <mitch.hayenga@arm.com> cpu: Change writeback modeling for outstanding instructions

As highlighed on the mailing list gem5's writeback modeling can impact
performance. This patch removes the limitation on maximum outstanding issued
instructions, however the number that can writeback in a single cycle is still
respected in instToCommit().
diff 8793:5f25086326ac Fri Nov 18 04:33:00 EST 2011 Gabe Black <gblack@eecs.umich.edu> SE/FS: Get rid of FULL_SYSTEM in the CPU directory.
H A Drename_map.hhdiff 13610:5d5404ac6288 Tue Oct 16 11:04:00 EDT 2018 Giacomo Gabrielli <giacomo.gabrielli@arm.com> arch,cpu: Add vector predicate registers

Latest-gen. vector/SIMD extensions, including the Arm Scalable Vector
Extension (SVE), introduce the notion of a predicate register file.
This changeset adds this feature across architectures and CPU models.

Change-Id: Iebcadbad89c0a582ff8b1b70de353305db603946
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13715
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
diff 10935:acd48ddd725f Tue Jul 28 02:58:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> revert 5af8f40d8f2c
diff 10934:5af8f40d8f2c Sun Jul 26 11:21:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> cpu: implements vector registers

This adds a vector register type. The type is defined as a std::array of a
fixed number of uint64_ts. The isa_parser.py has been modified to parse vector
register operands and generate the required code. Different cpus have vector
register files now.
/gem5/tests/quick/fs/10.linux-boot/ref/x86/linux/pc-simple-atomic/
H A Dstats.txtdiff 10352:5f1f92bf76ee Wed Sep 03 07:42:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> stats: Update stats for CPU and cache changes

This patch updates the stats to reflect the fixes and changes to the
CPU (mainly the o3), and the caches.
diff 9838:43d22d746e7a Mon Aug 19 03:52:00 EDT 2013 Andreas Hansson <andreas.hansson@arm.com> stats: Cumulative stats update

This patch updates the stats to reflect the: 1) addition of the
internal queue in SimpleMemory, 2) moving of the memory class outside
FSConfig, 3) fixing up of the 2D vector printing format, 4) specifying
burst size and interface width for the DRAM instead of relying on
cache-line size, 5) performing merging in the DRAM controller write
buffer, and 6) fixing how idle cycles are counted in the atomic and
timing CPU models.

The main reason for bundling them up is to minimise the changeset
size.
diff 9213:5cab5448909c Tue Sep 11 10:34:00 EDT 2012 Nilay Vaish <nilay@cs.wisc.edu> x86 Regressions: Update stats due to register predication
/gem5/src/mem/ruby/network/simple/
H A DSimpleNetwork.hhdiff 11124:5d38dc2f7d66 Thu Sep 24 09:41:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> ruby: simple network: refactor code

Drops an unused variable and marks three variables as const.
diff 11113:5a2e1b1b5c43 Wed Sep 16 13:10:00 EDT 2015 Joe Gross <joe.gross@amd.com> ruby: fix message buffer init order

The recent changes to make MessageBuffers SimObjects required them to be
initialized in a particular order, which could break some protocols. Fix this
by calling initNetQueues on the external nodes of each external link in the
constructor of Network.

This patch also refactors the duplicated code for checking network allocation
and setting net queues (which are called by initNetQueues) from the simple and
garnet networks to be in Network.
diff 9799:5aed42e54180 Fri Jun 28 22:36:00 EDT 2013 Nilay Vaish <nilay@cs.wisc.edu> ruby: network: remove reconfiguration code
This code seems not to be of any use now. There is no path in the simulator
that allows for reconfiguring the network. A better approach would be to
take a checkpoint and start the simulation from the checkpoint with the new
configuration.
/gem5/src/arch/alpha/
H A Disa.hhdiff 13610:5d5404ac6288 Tue Oct 16 11:04:00 EDT 2018 Giacomo Gabrielli <giacomo.gabrielli@arm.com> arch,cpu: Add vector predicate registers

Latest-gen. vector/SIMD extensions, including the Arm Scalable Vector
Extension (SVE), introduce the notion of a predicate register file.
This changeset adds this feature across architectures and CPU models.

Change-Id: Iebcadbad89c0a582ff8b1b70de353305db603946
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13715
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
diff 10935:acd48ddd725f Tue Jul 28 02:58:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> revert 5af8f40d8f2c
diff 10934:5af8f40d8f2c Sun Jul 26 11:21:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> cpu: implements vector registers

This adds a vector register type. The type is defined as a std::array of a
fixed number of uint64_ts. The isa_parser.py has been modified to parse vector
register operands and generate the required code. Different cpus have vector
register files now.
/gem5/src/arch/sparc/
H A Disa.hhdiff 13610:5d5404ac6288 Tue Oct 16 11:04:00 EDT 2018 Giacomo Gabrielli <giacomo.gabrielli@arm.com> arch,cpu: Add vector predicate registers

Latest-gen. vector/SIMD extensions, including the Arm Scalable Vector
Extension (SVE), introduce the notion of a predicate register file.
This changeset adds this feature across architectures and CPU models.

Change-Id: Iebcadbad89c0a582ff8b1b70de353305db603946
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13715
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
diff 10935:acd48ddd725f Tue Jul 28 02:58:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> revert 5af8f40d8f2c
diff 10934:5af8f40d8f2c Sun Jul 26 11:21:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> cpu: implements vector registers

This adds a vector register type. The type is defined as a std::array of a
fixed number of uint64_ts. The isa_parser.py has been modified to parse vector
register operands and generate the required code. Different cpus have vector
register files now.
/gem5/src/arch/x86/
H A Disa.hhdiff 13610:5d5404ac6288 Tue Oct 16 11:04:00 EDT 2018 Giacomo Gabrielli <giacomo.gabrielli@arm.com> arch,cpu: Add vector predicate registers

Latest-gen. vector/SIMD extensions, including the Arm Scalable Vector
Extension (SVE), introduce the notion of a predicate register file.
This changeset adds this feature across architectures and CPU models.

Change-Id: Iebcadbad89c0a582ff8b1b70de353305db603946
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13715
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
diff 10935:acd48ddd725f Tue Jul 28 02:58:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> revert 5af8f40d8f2c
diff 10934:5af8f40d8f2c Sun Jul 26 11:21:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> cpu: implements vector registers

This adds a vector register type. The type is defined as a std::array of a
fixed number of uint64_ts. The isa_parser.py has been modified to parse vector
register operands and generate the required code. Different cpus have vector
register files now.
/gem5/src/kern/linux/
H A Dlinux.hhdiff 11851:824055fe6b30 Wed Nov 09 15:27:00 EST 2016 Brandon Potter <brandon.potter@amd.com> syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead

The EIOProcess class was removed recently and it was the only other class
which derived from Process. Since every Process invocation is also a
LiveProcess invocation, it makes sense to simplify the organization by
combining the fields from LiveProcess into Process.
diff 10796:5bcba8001c7e Wed Apr 22 10:51:00 EDT 2015 Brandon Potter <brandon.potter@amd.com> syscall_emul: implement clock_gettime system call
diff 6683:5e0fcc528fe5 Sat Oct 24 13:53:00 EDT 2009 Timothy M. Jones <tjones1@inf.ed.ac.uk> syscall: Implementation of the times system call

Completed in 161 milliseconds

<<11121314151617181920>>