Searched hist:2014 (Results 1326 - 1350 of 1681) sorted by relevance

<<51525354555657585960>>

/gem5/src/arch/arm/insts/
H A Dpseudo.cc10611:3bba9f2d0c7d Tue Dec 23 09:31:00 EST 2014 Andreas Sandberg <Andreas.Sandberg@ARM.com> arm: Raise an alignment fault if a PC has illegal alignment

We currently don't handle unaligned PCs correctly. There is one check
for unaligned PCs in the TLB when running in aarch64 mode, but this
check does not cover cases where the CPU does not do a TLB lookup when
decoding an instruction (e.g., a branch stays within the same cache
line). Additionally, the Decoder class sometimes throws an assertion
for unaligned PCs which breaks speculation.

This changeset introduces a decoder fault bit field in the ExtMachInst
structure. This field can be used to signal a decoder failure. If set,
the decoder generates an internal gem5fault instruction instead of a
normal instruction. This instruction in turns either panics (fault
type PANIC), returns an PCAlignmentFault (fault type UNALIGNED,
aarch64) or PrefetchAbort (fault type UNALIGNED, aarch32).

The patch causes minor changes to the realview64 regressions, and a
stats bump will follow.
H A Dmem.cc10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
/gem5/src/arch/arm/
H A Dtypes.hh10611:3bba9f2d0c7d Tue Dec 23 09:31:00 EST 2014 Andreas Sandberg <Andreas.Sandberg@ARM.com> arm: Raise an alignment fault if a PC has illegal alignment

We currently don't handle unaligned PCs correctly. There is one check
for unaligned PCs in the TLB when running in aarch64 mode, but this
check does not cover cases where the CPU does not do a TLB lookup when
decoding an instruction (e.g., a branch stays within the same cache
line). Additionally, the Decoder class sometimes throws an assertion
for unaligned PCs which breaks speculation.

This changeset introduces a decoder fault bit field in the ExtMachInst
structure. This field can be used to signal a decoder failure. If set,
the decoder generates an internal gem5fault instruction instead of a
normal instruction. This instruction in turns either panics (fault
type PANIC), returns an PCAlignmentFault (fault type UNALIGNED,
aarch64) or PrefetchAbort (fault type UNALIGNED, aarch32).

The patch causes minor changes to the realview64 regressions, and a
stats bump will follow.
10537:47fe87b0cf97 Fri Nov 14 03:53:00 EST 2014 Andreas Hansson <andreas.hansson@arm.com> arm: Fixes based on UBSan and static analysis

Another churn to clean up undefined behaviour, mostly ARM, but some
parts also touching the generic part of the code base.

Most of the fixes are simply ensuring that proper intialisation. One
of the more subtle changes is the return type of the sign-extension,
which is changed to uint64_t. This is to avoid shifting negative
values (undefined behaviour) in the ISA code.
10316:d2850235e31c Wed Sep 03 07:42:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arm: Fix ExtMachInst hash operator underlying type

This patch fixes the hash operator used for ARM ExtMachInst, which
incorrectly was still using uint32_t. Instead of changing it to
uint64_t it is not using the underlying data type of the BitUnion.
10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
H A Dstacktrace.cc10417:710ee116eb68 Sat Sep 27 09:08:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use const StaticInstPtr references where possible

This patch optimises the passing of StaticInstPtr by avoiding copying
the reference-counting pointer. This avoids first incrementing and
then decrementing the reference-counting pointer.
/gem5/src/arch/mips/
H A DMipsSystem.py10249:6bbb7ae309ac Mon Jun 30 13:56:00 EDT 2014 Stephan Diestelhorst <stephan.diestelhorst@arm.com> power: Add basic DVFS support for gem5

Adds DVFS capabilities to gem5, by allowing users to specify lists for
frequencies and voltages in SrcClockDomains and VoltageDomains respectively.
A separate component, DVFSHandler, provides a small interface to change
operating points of the associated domains.

Clock domains will be linked to voltage domains and thus allow separate clock,
but shared voltage lines.

Currently all the valid performance-level updates are performed with a fixed
transition latency as specified for the domain.

Config file example:
...
vd = VoltageDomain(voltage = ['1V','0.95V','0.90V','0.85V'])
tsys.cluster1.clk_domain.clock = ['1GHz','700MHz','400MHz','230MHz']
tsys.cluster2.clk_domain.clock = ['1GHz','700MHz','400MHz','230MHz']
tsys.cluster1.clk_domain.domain_id = 0
tsys.cluster2.clk_domain.domain_id = 1
tsys.cluster1.clk_domain.voltage_domain = vd
tsys.cluster2.clk_domain.voltage_domain = vd
tsys.dvfs_handler.domains = [tsys.cluster1.clk_domain,
tsys.cluster2.clk_domain]
tsys.dvfs_handler.enable = True
H A Dstacktrace.cc10417:710ee116eb68 Sat Sep 27 09:08:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use const StaticInstPtr references where possible

This patch optimises the passing of StaticInstPtr by avoiding copying
the reference-counting pointer. This avoids first incrementing and
then decrementing the reference-counting pointer.
/gem5/src/arch/power/
H A Dprocess.hh10299:bec0c5ffc323 Thu Aug 28 11:11:00 EDT 2014 Alexandru <alexandru.dutu@amd.com> mem: adding architectural page table support for SE mode
This patch enables the use of page tables that are stored in system memory
and respect x86 specification, in SE mode. It defines an architectural
page table for x86 as a MultiLevelPageTable class and puts a placeholder
class for other ISAs page tables, giving the possibility for future
implementation.
/gem5/src/arch/x86/
H A Dutility.cc10553:c1ad57c53a36 Sun Nov 23 21:01:00 EST 2014 Alexandru Dutu <alexandru.dutu@amd.com> kvm, x86: Adding support for SE mode execution
This patch adds methods in KvmCPU model to handle KVM exits caused by syscall
instructions and page faults. These types of exits will be encountered if
KvmCPU is run in SE mode.
10407:a9023811bf9e Sat Sep 20 17:18:00 EDT 2014 Mitch Hayenga <mitch.hayenga@arm.com> alpha,arm,mips,power,x86,cpu,sim: Cleanup activate/deactivate

activate(), suspend(), and halt() used on thread contexts had an optional
delay parameter. However this parameter was often ignored. Also, when used,
the delay was seemily arbitrarily set to 0 or 1 cycle (no other delays were
ever specified). This patch removes the delay parameter and 'Events'
associated with them across all ISAs and cores. Unused activate logic
is also removed.
10058:32784c63de81 Wed Feb 05 08:08:00 EST 2014 Andreas Sandberg <andreas@sandberg.pp.se> x86: Fix x87 state transfer bug

Changeset 7274310be1bb (isa: clean up register constants) increased
the value of NumFloatRegs, which triggered a bug in
X86ISA::copyRegs(). This bug is caused by the x87 stack being copied
twice since register indexes past NUM_FLOATREGS are mapped into the
x87 stack relative to the top of the stack, which is undefined when
the copy takes place.

This changeset updates the copyRegs() function to use access registers
using the non-flattening interface, which guarantees that undesirable
register folding does not happen.
10057:09507a45c701 Sun Feb 02 10:37:00 EST 2014 Nikos Nikoleris <nikos.nikoleris@gmail.com> x86, kvm: Fix bug in the RFlags get and set functions

The getRFlags and setRFlags utility functions were not updated
correctly when condition registers were separated into their own
register class. This lead to incorrect state transfer in calls from
kvm into the simulator (e.g., m5 readfile ended up in an infinite
loop) and when switching CPUs. This patch makes these utility
functions use getCCReg and setCCReg instead of getIntReg and setIntReg
which read and write the integer registers.

Reviewed-by: Andreas Sandberg <andreas@sandberg.pp.se>
H A Dmemhelpers.hh10474:799c8ee4ecba Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use shared_ptr for all Faults

This patch takes quite a large step in transitioning from the ad-hoc
RefCountingPtr to the c++11 shared_ptr by adopting its use for all
Faults. There are no changes in behaviour, and the code modifications
are mostly just replacing "new" with "make_shared".
H A Dstacktrace.cc10417:710ee116eb68 Sat Sep 27 09:08:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use const StaticInstPtr references where possible

This patch optimises the passing of StaticInstPtr by avoiding copying
the reference-counting pointer. This avoids first incrementing and
then decrementing the reference-counting pointer.
H A Dpseudo_inst.cc10553:c1ad57c53a36 Sun Nov 23 21:01:00 EST 2014 Alexandru Dutu <alexandru.dutu@amd.com> kvm, x86: Adding support for SE mode execution
This patch adds methods in KvmCPU model to handle KVM exits caused by syscall
instructions and page faults. These types of exits will be encountered if
KvmCPU is run in SE mode.
/gem5/src/cpu/checker/
H A Dcpu_impl.hh10426:cba563d00376 Thu Oct 09 17:51:00 EDT 2014 Mitch Hayenga <mitch.hayenga@arm.com> cpu: Remove Ozone CPU from the source tree

The Ozone CPU is now very much out of date and completely
non-functional, with no one actively working on restoring it. It is a
source of confusion for new users who attempt to use it before
realizing its current state. RIP
10417:710ee116eb68 Sat Sep 27 09:08:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use const StaticInstPtr references where possible

This patch optimises the passing of StaticInstPtr by avoiding copying
the reference-counting pointer. This avoids first incrementing and
then decrementing the reference-counting pointer.
10379:c00f6d7e2681 Fri Sep 19 10:35:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Pass faults by const reference where possible

This patch changes how faults are passed between methods in an attempt
to copy as few reference-counting pointer instances as possible. This
should avoid unecessary copies being created, contributing to the
increment/decrement of the reference counters.
10034:f2ce7114b137 Fri Jan 24 16:29:00 EST 2014 Geoffrey Blake <Geoffrey.Blake@arm.com> checker: CheckerCPU handling of MiscRegs was incorrect

The CheckerCPU model in pre-v8 code was not checking the
updates to miscellaneous registers due to some methods
for setting misc regs were not instrumented. The v8 patches
exposed this by calling the instrumented misc reg update
methods and then invoking the checker before the main CPU had
updated its misc regs, leading to false positives about
register mismatches. This patch fixes the non-instrumented
misc reg update methods and places calls to the checker in
the proper places in the O3 model.
/gem5/src/cpu/minor/
H A DMinorCPU.py10259:ebb376f73dd2 Wed Jul 23 17:09:00 EDT 2014 Andrew Bardsley <Andrew.Bardsley@arm.com> cpu: `Minor' in-order CPU model

This patch contains a new CPU model named `Minor'. Minor models a four
stage in-order execution pipeline (fetch lines, decompose into
macroops, decompose macroops into microops, execute).

The model was developed to support the ARM ISA but should be fixable
to support all the remaining gem5 ISAs. It currently also works for
Alpha, and regressions are included for ARM and Alpha (including Linux
boot).

Documentation for the model can be found in src/doc/inside-minor.doxygen and
its internal operations can be visualised using the Minorview tool
utils/minorview.py.

Minor was designed to be fairly simple and not to engage in a lot of
instruction annotation. As such, it currently has very few gathered
stats and may lack other gem5 features.

Minor is faster than the o3 model. Sample results:

Benchmark | Stat host_seconds (s)
---------------+--------v--------v--------
(on ARM, opt) | simple | o3 | minor
| timing | timing | timing
---------------+--------+--------+--------
10.linux-boot | 169 | 1883 | 1075
10.mcf | 117 | 967 | 491
20.parser | 668 | 6315 | 3146
30.eon | 542 | 3413 | 2414
40.perlbmk | 2339 | 20905 | 11532
50.vortex | 122 | 1094 | 588
60.bzip2 | 2045 | 18061 | 9662
70.twolf | 207 | 2736 | 1036
H A Dscoreboard.cc10259:ebb376f73dd2 Wed Jul 23 17:09:00 EDT 2014 Andrew Bardsley <Andrew.Bardsley@arm.com> cpu: `Minor' in-order CPU model

This patch contains a new CPU model named `Minor'. Minor models a four
stage in-order execution pipeline (fetch lines, decompose into
macroops, decompose macroops into microops, execute).

The model was developed to support the ARM ISA but should be fixable
to support all the remaining gem5 ISAs. It currently also works for
Alpha, and regressions are included for ARM and Alpha (including Linux
boot).

Documentation for the model can be found in src/doc/inside-minor.doxygen and
its internal operations can be visualised using the Minorview tool
utils/minorview.py.

Minor was designed to be fairly simple and not to engage in a lot of
instruction annotation. As such, it currently has very few gathered
stats and may lack other gem5 features.

Minor is faster than the o3 model. Sample results:

Benchmark | Stat host_seconds (s)
---------------+--------v--------v--------
(on ARM, opt) | simple | o3 | minor
| timing | timing | timing
---------------+--------+--------+--------
10.linux-boot | 169 | 1883 | 1075
10.mcf | 117 | 967 | 491
20.parser | 668 | 6315 | 3146
30.eon | 542 | 3413 | 2414
40.perlbmk | 2339 | 20905 | 11532
50.vortex | 122 | 1094 | 588
60.bzip2 | 2045 | 18061 | 9662
70.twolf | 207 | 2736 | 1036
H A Dscoreboard.hh10259:ebb376f73dd2 Wed Jul 23 17:09:00 EDT 2014 Andrew Bardsley <Andrew.Bardsley@arm.com> cpu: `Minor' in-order CPU model

This patch contains a new CPU model named `Minor'. Minor models a four
stage in-order execution pipeline (fetch lines, decompose into
macroops, decompose macroops into microops, execute).

The model was developed to support the ARM ISA but should be fixable
to support all the remaining gem5 ISAs. It currently also works for
Alpha, and regressions are included for ARM and Alpha (including Linux
boot).

Documentation for the model can be found in src/doc/inside-minor.doxygen and
its internal operations can be visualised using the Minorview tool
utils/minorview.py.

Minor was designed to be fairly simple and not to engage in a lot of
instruction annotation. As such, it currently has very few gathered
stats and may lack other gem5 features.

Minor is faster than the o3 model. Sample results:

Benchmark | Stat host_seconds (s)
---------------+--------v--------v--------
(on ARM, opt) | simple | o3 | minor
| timing | timing | timing
---------------+--------+--------+--------
10.linux-boot | 169 | 1883 | 1075
10.mcf | 117 | 967 | 491
20.parser | 668 | 6315 | 3146
30.eon | 542 | 3413 | 2414
40.perlbmk | 2339 | 20905 | 11532
50.vortex | 122 | 1094 | 588
60.bzip2 | 2045 | 18061 | 9662
70.twolf | 207 | 2736 | 1036
/gem5/src/cpu/o3/
H A DO3CPU.py10338:8bee5f4edb92 Tue Apr 29 17:05:00 EDT 2014 Curtis Dunham <Curtis.Dunham@arm.com> arm: use condition code registers for ARM ISA

Analogous to ee049bf (for x86). Requires a bump of the checkpoint version
and corresponding upgrader code to move the condition code register values
to the new register file.
10331:ed05298e8566 Wed Sep 03 07:42:00 EDT 2014 Mitch Hayenga <mitch.hayenga@arm.com> cpu: Fix SMT scheduling issue with the O3 cpu

The o3 cpu could attempt to schedule inactive threads under round-robin SMT
mode.

This is because it maintained an independent priority list of threads from the
active thread list. This priority list could be come stale once threads were
inactive, leading to the cpu trying to fetch/commit from inactive threads.


Additionally the fetch queue is now forcibly flushed of instrctuctions
from the de-scheduled thread.

Relevant output:

24557000: system.cpu: [tid:1]: Calling deactivate thread.
24557000: system.cpu: [tid:1]: Removing from active threads list

24557500: system.cpu:
FullO3CPU: Ticking main, FullO3CPU.
24557500: system.cpu.fetch: Running stage.
24557500: system.cpu.fetch: Attempting to fetch from [tid:1]
10329:12e3be8203a5 Wed Sep 03 07:42:00 EDT 2014 Mitch Hayenga <mitch.hayenga@arm.com> cpu: Add a fetch queue to the o3 cpu

This patch adds a fetch queue that sits between fetch and decode to the
o3 cpu. This effectively decouples fetch from decode stalls allowing it
to be more aggressive, running futher ahead in the instruction stream.
10327:5b6279635c49 Wed Sep 03 07:42:00 EDT 2014 Mitch Hayenga <mitch.hayenga@arm.com> cpu: Change writeback modeling for outstanding instructions

As highlighed on the mailing list gem5's writeback modeling can impact
performance. This patch removes the limitation on maximum outstanding issued
instructions, however the number that can writeback in a single cycle is still
respected in instToCommit().
/gem5/src/dev/arm/
H A Dvgic.hh10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
/gem5/src/mem/cache/prefetch/
H A Dtagged.cc10623:b9646f4546ad Tue Dec 23 09:31:00 EST 2014 Mitch Hayenga <mitch.hayenga@arm.com> mem: Rework the structuring of the prefetchers

Re-organizes the prefetcher class structure. Previously the
BasePrefetcher forced multiple assumptions on the prefetchers that
inherited from it. This patch makes the BasePrefetcher class truly
representative of base functionality. For example, the base class no
longer enforces FIFO order. Instead, prefetchers with FIFO requests
(like the existing stride and tagged prefetchers) now inherit from a
new QueuedPrefetcher base class.

Finally, the stride-based prefetcher now assumes a custimizable lookup table
(sets/ways) rather than the previous fully associative structure.
/gem5/src/mem/cache/tags/
H A Dbase.cc10466:73b7549d979e Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Dynamically determine page bytes in memory components

This patch takes a step towards an ISA-agnostic memory
system by enabling the components to establish the page size after
instantiation. The swap operation in the memory is now also allowing
any granularity to avoid depending on the IntReg of the ISA.
10360:919c02740209 Tue Sep 09 04:36:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> misc: Fix a number of unitialised variables and members

Static analysis unearther a bunch of uninitialised variables and
members, and this patch addresses the problem. In all cases these
omissions seem benign in the end, but at least fixing them means less
false positives next time round.
10025:fdf737112e46 Fri Jan 24 16:29:00 EST 2014 Timothy M. Jones <timothy.jones@arm.com> Cache: Collect very basic stats on tag and data accesses

Adds very basic statistics on the number of tag and data accesses within the
cache, which is important for power modelling. For the tags, simply count
the associativity of the cache each time. For the data, this depends on
whether tags and data are accessed sequentially, which is given by a new
parameter. In the parallel case, all data blocks are accessed each time, but
with sequential accesses, a single data block is accessed only on a hit.
10024:fc10e1f9f124 Fri Jan 24 16:29:00 EST 2014 Dam Sunwoo <dam.sunwoo@arm.com> mem: per-thread cache occupancy and per-block ages

This patch enables tracking of cache occupancy per thread along with
ages (in buckets) per cache blocks. Cache occupancy stats are
recalculated on each stat dump.
/gem5/src/python/m5/util/
H A Dconvert.py10427:26fee6c20087 Thu Oct 09 17:52:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> config: Add Current as a parameter type

This patch adds the Python parameter type Current, which is used for
the DRAM power modelling (to start with). With this addition we avoid
implicit unit assumptions.
/gem5/tests/configs/
H A Dmemtest-ruby.py10524:fff17530cef6 Thu Nov 06 06:42:00 EST 2014 Nilay Vaish <nilay@cs.wisc.edu> ruby: interface with classic memory controller
This patch is the final in the series. The whole series and this patch in
particular were written with the aim of interfacing ruby's directory controller
with the memory controller in the classic memory system. This is being done
since ruby's memory controller has not being kept up to date with the changes
going on in DRAMs. Classic's memory controller is more up to date and
supports multiple different types of DRAM. This also brings classic and
ruby ever more close. The patch also changes ruby's memory controller to
expose the same interface.
10519:7a3ad4b09ce4 Thu Nov 06 06:41:00 EST 2014 Nilay Vaish <nilay@cs.wisc.edu> ruby: single physical memory in fs mode
Both ruby and the system used to maintain memory copies. With the changes
carried for programmed io accesses, only one single memory is required for
fs simulations. This patch sets the copy of memory that used to reside
with the system to null, so that no space is allocated, but address checks
can still be carried out. All the memory accesses now source and sink values
to the memory maintained by ruby.
10405:7a618c07e663 Sat Sep 20 17:18:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Rename Bus to XBar to better reflect its behaviour

This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.

As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.
10120:f5ceb3c3edb6 Thu Mar 20 10:14:00 EDT 2014 Nilay Vaish <nilay@cs.wisc.edu> config: ruby: rename _cpu_ruby_ports to _cpu_ports
/gem5/util/stats/
H A Dprofile.py2014:7df693ff6fa4 Mon Dec 19 02:02:00 EST 2005 Nathan Binkert <binkertn@umich.edu> Add a little bit of support to grab info for making graphs
without using the jobfile.

util/stats/db.py:
util/stats/profile.py:
Make it possible to send job as a string and to set the system
separately from the job.
/gem5/src/arch/x86/bios/
H A Dintelmp.cc10292:933dfb9d8279 Tue Aug 26 10:13:00 EDT 2014 Andreas Sandberg <Andreas.Sandberg@ARM.com> base: Replace the internal varargs stuff with C++11 constructs

We currently use our own home-baked support for type-safe variadic
functions. This is confusing and somewhat limited (e.g., cprintf only
supports a limited number of arguments). This changeset converts all
uses of our internal varargs support to use C++11 variadic macros.
/gem5/src/cpu/pred/
H A D2bit_local.hh10330:f54586c894e3 Wed Sep 03 07:42:00 EDT 2014 Mitch Hayenga <mitch.hayenga@arm.com> cpu: Fix incorrect speculative branch predictor behavior

When a branch mispredicted gem5 would squash all history after and including
the mispredicted branch. However, the mispredicted branch is still speculative
and its history is required to rollback state if another, older, branch
mispredicts. This leads to things like RAS corruption.
/gem5/configs/example/
H A Dread_config.py10458:64809024b924 Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> config: Add the ability to read a config file using C++ and Python

This patch adds the ability to load in config.ini files generated from
gem5 into another instance of gem5 built without Python configuration
support. The intended use case is for configuring gem5 when it is a
library embedded in another simulation system.

A parallel config file reader is also provided purely in Python to
demonstrate the approach taken and to provided similar functionality
for as-yet-unknown use models. The Python configuration file reader
can read both .ini and .json files.

C++ configuration file reading:

A command line option has been added for scons to enable C++ configuration
file reading: --with-cxx-config

There is an example in util/cxx_config that shows C++ configuration in action.
util/cxx_config/README explains how to build the example.

Configuration is achieved by the object CxxConfigManager. It handles
reading object descriptions from a CxxConfigFileBase object which
wraps a config file reader. The wrapper class CxxIniFile is provided
which wraps an IniFile for reading .ini files. Reading .json files
from C++ would be possible with a similar wrapper and a JSON parser.

After reading object descriptions, CxxConfigManager creates
SimObjectParam-derived objects from the classes in the (generated with this
patch) directory build/ARCH/cxx_config

CxxConfigManager can then build SimObjects from those SimObjectParams (in an
order dictated by the SimObject-value parameters on other objects) and bind
ports of the produced SimObjects.

A minimal set of instantiate-replacing member functions are provided by
CxxConfigManager and few of the member functions of SimObject (such as drain)
are extended onto CxxConfigManager.

Python configuration file reading (configs/example/read_config.py):

A Python version of the reader is also supplied with a similar interface to
CxxConfigFileBase (In Python: ConfigFile) to config file readers.

The Python config file reading will handle both .ini and .json files.

The object construction strategy is slightly different in Python from the C++
reader as you need to avoid objects prematurely becoming the children of other
objects when setting parameters.

Port binding also needs to be strictly in the same port-index order as the
original instantiation.

Completed in 154 milliseconds

<<51525354555657585960>>