Searched hist:5 (Results 226 - 250 of 1055) sorted by relevance
/gem5/tests/test-progs/insttest/src/riscv/ | ||
H A D | rv64m.h | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
/gem5/src/arch/mips/ | ||
H A D | vtophys.cc | 5268:5bfc53fe60e7 Fri Nov 16 21:32:00 EST 2007 Korey Sewell <ksewell@umich.edu> go back and fix up MIPS copyright headers |
/gem5/tests/long/se/10.mcf/ | ||
H A D | test.py | 11851:824055fe6b30 Wed Nov 09 15:27:00 EST 2016 Brandon Potter <brandon.potter@amd.com> syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead The EIOProcess class was removed recently and it was the only other class which derived from Process. Since every Process invocation is also a LiveProcess invocation, it makes sense to simplify the organization by combining the fields from LiveProcess into Process. |
/gem5/tests/long/se/20.parser/ | ||
H A D | test.py | 11851:824055fe6b30 Wed Nov 09 15:27:00 EST 2016 Brandon Potter <brandon.potter@amd.com> syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead The EIOProcess class was removed recently and it was the only other class which derived from Process. Since every Process invocation is also a LiveProcess invocation, it makes sense to simplify the organization by combining the fields from LiveProcess into Process. |
/gem5/tests/long/se/50.vortex/ | ||
H A D | test.py | 11851:824055fe6b30 Wed Nov 09 15:27:00 EST 2016 Brandon Potter <brandon.potter@amd.com> syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead The EIOProcess class was removed recently and it was the only other class which derived from Process. Since every Process invocation is also a LiveProcess invocation, it makes sense to simplify the organization by combining the fields from LiveProcess into Process. |
/gem5/tests/long/se/30.eon/ | ||
H A D | test.py | 11851:824055fe6b30 Wed Nov 09 15:27:00 EST 2016 Brandon Potter <brandon.potter@amd.com> syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead The EIOProcess class was removed recently and it was the only other class which derived from Process. Since every Process invocation is also a LiveProcess invocation, it makes sense to simplify the organization by combining the fields from LiveProcess into Process. |
/gem5/tests/long/se/60.bzip2/ | ||
H A D | test.py | 11851:824055fe6b30 Wed Nov 09 15:27:00 EST 2016 Brandon Potter <brandon.potter@amd.com> syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead The EIOProcess class was removed recently and it was the only other class which derived from Process. Since every Process invocation is also a LiveProcess invocation, it makes sense to simplify the organization by combining the fields from LiveProcess into Process. |
/gem5/tests/quick/se/02.insttest/ | ||
H A D | test.py | 11851:824055fe6b30 Wed Nov 09 15:27:00 EST 2016 Brandon Potter <brandon.potter@amd.com> syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead The EIOProcess class was removed recently and it was the only other class which derived from Process. Since every Process invocation is also a LiveProcess invocation, it makes sense to simplify the organization by combining the fields from LiveProcess into Process. |
/gem5/src/sim/ | ||
H A D | stat_register.hh | 11990:5fad911cc326 Sun Jan 29 19:00:00 EST 2017 Andreas Sandberg <andreas.sandberg@arm.com> base, sim, dev: Remove SWIG Remove SWIG guards and SWIG-specific C++ code. Change-Id: Icaad6720513b6f48153727ef3f70e0dba0df4bee Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Andreas Hansson <andreas.hansson@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/2921 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com> |
/gem5/src/arch/arm/insts/ | ||
H A D | data64.cc | 10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32) Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64 kernel you are restricted to AArch64 user-mode binaries. This will be addressed in a later patch. Note: Virtualization is only supported in AArch32 mode. This will also be fixed in a later patch. Contributors: Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation) Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation) Mbou Eyole (AArch64 NEON, validation) Ali Saidi (AArch64 Linux support, code integration, validation) Edmund Grimley-Evans (AArch64 FP) William Wang (AArch64 Linux support) Rene De Jong (AArch64 Linux support, performance opt.) Matt Horsnell (AArch64 MP, validation) Matt Evans (device models, code integration, validation) Chris Adeniyi-Jones (AArch64 syscall-emulation) Prakash Ramrakhyani (validation) Dam Sunwoo (validation) Chander Sudanthi (validation) Stephan Diestelhorst (validation) Andreas Hansson (code integration, performance opt.) Eric Van Hensbergen (performance opt.) Gabe Black |
H A D | branch64.cc | 10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32) Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64 kernel you are restricted to AArch64 user-mode binaries. This will be addressed in a later patch. Note: Virtualization is only supported in AArch32 mode. This will also be fixed in a later patch. Contributors: Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation) Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation) Mbou Eyole (AArch64 NEON, validation) Ali Saidi (AArch64 Linux support, code integration, validation) Edmund Grimley-Evans (AArch64 FP) William Wang (AArch64 Linux support) Rene De Jong (AArch64 Linux support, performance opt.) Matt Horsnell (AArch64 MP, validation) Matt Evans (device models, code integration, validation) Chris Adeniyi-Jones (AArch64 syscall-emulation) Prakash Ramrakhyani (validation) Dam Sunwoo (validation) Chander Sudanthi (validation) Stephan Diestelhorst (validation) Andreas Hansson (code integration, performance opt.) Eric Van Hensbergen (performance opt.) Gabe Black |
H A D | branch64.hh | 10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32) Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64 kernel you are restricted to AArch64 user-mode binaries. This will be addressed in a later patch. Note: Virtualization is only supported in AArch32 mode. This will also be fixed in a later patch. Contributors: Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation) Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation) Mbou Eyole (AArch64 NEON, validation) Ali Saidi (AArch64 Linux support, code integration, validation) Edmund Grimley-Evans (AArch64 FP) William Wang (AArch64 Linux support) Rene De Jong (AArch64 Linux support, performance opt.) Matt Horsnell (AArch64 MP, validation) Matt Evans (device models, code integration, validation) Chris Adeniyi-Jones (AArch64 syscall-emulation) Prakash Ramrakhyani (validation) Dam Sunwoo (validation) Chander Sudanthi (validation) Stephan Diestelhorst (validation) Andreas Hansson (code integration, performance opt.) Eric Van Hensbergen (performance opt.) Gabe Black |
H A D | data64.hh | 10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32) Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64 kernel you are restricted to AArch64 user-mode binaries. This will be addressed in a later patch. Note: Virtualization is only supported in AArch32 mode. This will also be fixed in a later patch. Contributors: Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation) Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation) Mbou Eyole (AArch64 NEON, validation) Ali Saidi (AArch64 Linux support, code integration, validation) Edmund Grimley-Evans (AArch64 FP) William Wang (AArch64 Linux support) Rene De Jong (AArch64 Linux support, performance opt.) Matt Horsnell (AArch64 MP, validation) Matt Evans (device models, code integration, validation) Chris Adeniyi-Jones (AArch64 syscall-emulation) Prakash Ramrakhyani (validation) Dam Sunwoo (validation) Chander Sudanthi (validation) Stephan Diestelhorst (validation) Andreas Hansson (code integration, performance opt.) Eric Van Hensbergen (performance opt.) Gabe Black |
/gem5/tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/ | ||
H A D | simout | 10218:5a45f124a2f7 Fri May 09 18:58:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> tests: Reflect name change in DRAM tests This patch reflects the recent name change in the DRAM TrafficGen tests and also tidies up the test directory. |
/gem5/src/kern/ | ||
H A D | operatingsystem.cc | 11851:824055fe6b30 Wed Nov 09 15:27:00 EST 2016 Brandon Potter <brandon.potter@amd.com> syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead The EIOProcess class was removed recently and it was the only other class which derived from Process. Since every Process invocation is also a LiveProcess invocation, it makes sense to simplify the organization by combining the fields from LiveProcess into Process. |
/gem5/src/arch/riscv/ | ||
H A D | isa_traits.hh | 11727:055ae402fbd0 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 5/5] Added missing support for timing CPU models Last of five patches adding RISC-V to GEM5. This patch adds support for timing, minor, and detailed CPU models that was missing in the last four, which basically consists of handling timing-mode memory accesses and telling the minor and detailed models what a no-op instruction should be (addi zero, zero, 0). Patches 1-4 introduced RISC-V and implemented the base instruction set, RV64I, and added the multiply, floating point, and atomic memory extensions, RV64MAFD. [Fixed compatibility with edit from patch 1.] [Fixed compatibility with hg copy edit from patch 1.] [Fixed some style errors in locked_mem.hh.] Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> 11727:055ae402fbd0 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 5/5] Added missing support for timing CPU models Last of five patches adding RISC-V to GEM5. This patch adds support for timing, minor, and detailed CPU models that was missing in the last four, which basically consists of handling timing-mode memory accesses and telling the minor and detailed models what a no-op instruction should be (addi zero, zero, 0). Patches 1-4 introduced RISC-V and implemented the base instruction set, RV64I, and added the multiply, floating point, and atomic memory extensions, RV64MAFD. [Fixed compatibility with edit from patch 1.] [Fixed compatibility with hg copy edit from patch 1.] [Fixed some style errors in locked_mem.hh.] Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> 11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I First of five patches adding RISC-V to GEM5. This patch introduces the base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation. The multiply, floating point, and atomic memory instructions will be added in additional patches, as well as support for more detailed CPU models. The loader is also modified to be able to parse RISC-V ELF files, and a "Hello world\!" example for RISC-V is added to test-progs. Patch 2 will implement the multiply extension, RV64M; patch 3 will implement the floating point (single- and double-precision) extensions, RV64FD; patch 4 will implement the atomic memory instructions, RV64A, and patch 5 will add support for timing, minor, and detailed CPU models that is missing from the first four patches (such as handling locked memory). [Removed several unused parameters and imports from RiscvInterrupts.py, RiscvISA.py, and RiscvSystem.py.] [Fixed copyright information in RISC-V files copied from elsewhere that had ARM licenses attached.] [Reorganized instruction definitions in decoder.isa so that they are sorted by opcode in preparation for the addition of ISA extensions M, A, F, D.] [Fixed formatting of several files, removed some variables and instructions that were missed when moving them to other patches, fixed RISC-V Foundation copyright attribution, and fixed history of files copied from other architectures using hg copy.] [Fixed indentation of switch cases in isa.cc.] [Reorganized syscall descriptions in linux/process.cc to remove large number of repeated unimplemented system calls and added implmementations to functions that have received them since it process.cc was first created.] [Fixed spacing for some copyright attributions.] [Replaced the rest of the file copies using hg copy.] [Fixed style check errors and corrected unaligned memory accesses.] [Fix some minor formatting mistakes.] Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> 11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I First of five patches adding RISC-V to GEM5. This patch introduces the base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation. The multiply, floating point, and atomic memory instructions will be added in additional patches, as well as support for more detailed CPU models. The loader is also modified to be able to parse RISC-V ELF files, and a "Hello world\!" example for RISC-V is added to test-progs. Patch 2 will implement the multiply extension, RV64M; patch 3 will implement the floating point (single- and double-precision) extensions, RV64FD; patch 4 will implement the atomic memory instructions, RV64A, and patch 5 will add support for timing, minor, and detailed CPU models that is missing from the first four patches (such as handling locked memory). [Removed several unused parameters and imports from RiscvInterrupts.py, RiscvISA.py, and RiscvSystem.py.] [Fixed copyright information in RISC-V files copied from elsewhere that had ARM licenses attached.] [Reorganized instruction definitions in decoder.isa so that they are sorted by opcode in preparation for the addition of ISA extensions M, A, F, D.] [Fixed formatting of several files, removed some variables and instructions that were missed when moving them to other patches, fixed RISC-V Foundation copyright attribution, and fixed history of files copied from other architectures using hg copy.] [Fixed indentation of switch cases in isa.cc.] [Reorganized syscall descriptions in linux/process.cc to remove large number of repeated unimplemented system calls and added implmementations to functions that have received them since it process.cc was first created.] [Fixed spacing for some copyright attributions.] [Replaced the rest of the file copies using hg copy.] [Fixed style check errors and corrected unaligned memory accesses.] [Fix some minor formatting mistakes.] Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | utility.hh | 11725:eb58f1bbeac8 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 3/5] Added RISCV floating point extensions RV64FD Third of five patches adding RISC-V to GEM5. This patch adds the RV64FD extensions, which include single- and double-precision floating point instructions. Patch 1 introduced RISC-V and implemented the base instruction set, RV64I and patch 2 implemented the integer multiply extension, RV64M. Patch 4 will implement the atomic memory instructions, RV64A, and patch 5 will add support for timing, minor, and detailed CPU models that is missing from the first four patches. [Fixed exception handling in floating-point instructions to conform better to IEEE-754 2008 standard and behavior of the Chisel-generated RISC-V simulator.] [Fixed style errors in decoder.isa.] [Fixed some fuzz caused by modifying a previous patch.] Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> 11725:eb58f1bbeac8 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 3/5] Added RISCV floating point extensions RV64FD Third of five patches adding RISC-V to GEM5. This patch adds the RV64FD extensions, which include single- and double-precision floating point instructions. Patch 1 introduced RISC-V and implemented the base instruction set, RV64I and patch 2 implemented the integer multiply extension, RV64M. Patch 4 will implement the atomic memory instructions, RV64A, and patch 5 will add support for timing, minor, and detailed CPU models that is missing from the first four patches. [Fixed exception handling in floating-point instructions to conform better to IEEE-754 2008 standard and behavior of the Chisel-generated RISC-V simulator.] [Fixed style errors in decoder.isa.] [Fixed some fuzz caused by modifying a previous patch.] Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> 11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I First of five patches adding RISC-V to GEM5. This patch introduces the base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation. The multiply, floating point, and atomic memory instructions will be added in additional patches, as well as support for more detailed CPU models. The loader is also modified to be able to parse RISC-V ELF files, and a "Hello world\!" example for RISC-V is added to test-progs. Patch 2 will implement the multiply extension, RV64M; patch 3 will implement the floating point (single- and double-precision) extensions, RV64FD; patch 4 will implement the atomic memory instructions, RV64A, and patch 5 will add support for timing, minor, and detailed CPU models that is missing from the first four patches (such as handling locked memory). [Removed several unused parameters and imports from RiscvInterrupts.py, RiscvISA.py, and RiscvSystem.py.] [Fixed copyright information in RISC-V files copied from elsewhere that had ARM licenses attached.] [Reorganized instruction definitions in decoder.isa so that they are sorted by opcode in preparation for the addition of ISA extensions M, A, F, D.] [Fixed formatting of several files, removed some variables and instructions that were missed when moving them to other patches, fixed RISC-V Foundation copyright attribution, and fixed history of files copied from other architectures using hg copy.] [Fixed indentation of switch cases in isa.cc.] [Reorganized syscall descriptions in linux/process.cc to remove large number of repeated unimplemented system calls and added implmementations to functions that have received them since it process.cc was first created.] [Fixed spacing for some copyright attributions.] [Replaced the rest of the file copies using hg copy.] [Fixed style check errors and corrected unaligned memory accesses.] [Fix some minor formatting mistakes.] Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> 11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I First of five patches adding RISC-V to GEM5. This patch introduces the base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation. The multiply, floating point, and atomic memory instructions will be added in additional patches, as well as support for more detailed CPU models. The loader is also modified to be able to parse RISC-V ELF files, and a "Hello world\!" example for RISC-V is added to test-progs. Patch 2 will implement the multiply extension, RV64M; patch 3 will implement the floating point (single- and double-precision) extensions, RV64FD; patch 4 will implement the atomic memory instructions, RV64A, and patch 5 will add support for timing, minor, and detailed CPU models that is missing from the first four patches (such as handling locked memory). [Removed several unused parameters and imports from RiscvInterrupts.py, RiscvISA.py, and RiscvSystem.py.] [Fixed copyright information in RISC-V files copied from elsewhere that had ARM licenses attached.] [Reorganized instruction definitions in decoder.isa so that they are sorted by opcode in preparation for the addition of ISA extensions M, A, F, D.] [Fixed formatting of several files, removed some variables and instructions that were missed when moving them to other patches, fixed RISC-V Foundation copyright attribution, and fixed history of files copied from other architectures using hg copy.] [Fixed indentation of switch cases in isa.cc.] [Reorganized syscall descriptions in linux/process.cc to remove large number of repeated unimplemented system calls and added implmementations to functions that have received them since it process.cc was first created.] [Fixed spacing for some copyright attributions.] [Replaced the rest of the file copies using hg copy.] [Fixed style check errors and corrected unaligned memory accesses.] [Fix some minor formatting mistakes.] Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | types.hh | 11726:11950d45640b Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 4/5] Added RISC-V atomic memory extension RV64A Fourth of five patches adding RISC-V to GEM5. This patch adds the RV64A extension, which includes atomic memory instructions. These instructions atomically read a value from memory, modify it with a value contained in a source register, and store the original memory value in the destination register and modified value back into memory. Because this requires two memory accesses and GEM5 does not support two timing memory accesses in a single instruction, each of these instructions is split into two micro- ops: A "load" micro-op, which reads the memory, and a "store" micro-op, which modifies and writes it back. Each atomic memory instruction also has two bits that acquire and release a lock on its memory location. Additionally, there are atomic load and store instructions that only either load or store, but not both, and can acquire or release memory locks. Note that because the current implementation of RISC-V only supports one core and one thread, it doesn't make sense to make use of AMO instructions. However, they do form a standard extension of the RISC-V ISA, so they are included mostly as a placeholder for when multithreaded execution is implemented. As a result, any tests for their correctness in a future patch may be abbreviated. Patch 1 introduced RISC-V and implemented the base instruction set, RV64I; patch 2 implemented the integer multiply extension, RV64M; and patch 3 implemented the single- and double-precision floating point extensions, RV64FD. Patch 5 will add support for timing, minor, and detailed CPU models that isn't present in patches 1-4. [Added missing file amo.isa] [Replaced information removed from initial patch that was missed during division into multiple patches.] [Fixed some minor formatting issues.] [Fixed oversight where LR and SC didn't have both AQ and RL flags.] Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> 11726:11950d45640b Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 4/5] Added RISC-V atomic memory extension RV64A Fourth of five patches adding RISC-V to GEM5. This patch adds the RV64A extension, which includes atomic memory instructions. These instructions atomically read a value from memory, modify it with a value contained in a source register, and store the original memory value in the destination register and modified value back into memory. Because this requires two memory accesses and GEM5 does not support two timing memory accesses in a single instruction, each of these instructions is split into two micro- ops: A "load" micro-op, which reads the memory, and a "store" micro-op, which modifies and writes it back. Each atomic memory instruction also has two bits that acquire and release a lock on its memory location. Additionally, there are atomic load and store instructions that only either load or store, but not both, and can acquire or release memory locks. Note that because the current implementation of RISC-V only supports one core and one thread, it doesn't make sense to make use of AMO instructions. However, they do form a standard extension of the RISC-V ISA, so they are included mostly as a placeholder for when multithreaded execution is implemented. As a result, any tests for their correctness in a future patch may be abbreviated. Patch 1 introduced RISC-V and implemented the base instruction set, RV64I; patch 2 implemented the integer multiply extension, RV64M; and patch 3 implemented the single- and double-precision floating point extensions, RV64FD. Patch 5 will add support for timing, minor, and detailed CPU models that isn't present in patches 1-4. [Added missing file amo.isa] [Replaced information removed from initial patch that was missed during division into multiple patches.] [Fixed some minor formatting issues.] [Fixed oversight where LR and SC didn't have both AQ and RL flags.] Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> 11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I First of five patches adding RISC-V to GEM5. This patch introduces the base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation. The multiply, floating point, and atomic memory instructions will be added in additional patches, as well as support for more detailed CPU models. The loader is also modified to be able to parse RISC-V ELF files, and a "Hello world\!" example for RISC-V is added to test-progs. Patch 2 will implement the multiply extension, RV64M; patch 3 will implement the floating point (single- and double-precision) extensions, RV64FD; patch 4 will implement the atomic memory instructions, RV64A, and patch 5 will add support for timing, minor, and detailed CPU models that is missing from the first four patches (such as handling locked memory). [Removed several unused parameters and imports from RiscvInterrupts.py, RiscvISA.py, and RiscvSystem.py.] [Fixed copyright information in RISC-V files copied from elsewhere that had ARM licenses attached.] [Reorganized instruction definitions in decoder.isa so that they are sorted by opcode in preparation for the addition of ISA extensions M, A, F, D.] [Fixed formatting of several files, removed some variables and instructions that were missed when moving them to other patches, fixed RISC-V Foundation copyright attribution, and fixed history of files copied from other architectures using hg copy.] [Fixed indentation of switch cases in isa.cc.] [Reorganized syscall descriptions in linux/process.cc to remove large number of repeated unimplemented system calls and added implmementations to functions that have received them since it process.cc was first created.] [Fixed spacing for some copyright attributions.] [Replaced the rest of the file copies using hg copy.] [Fixed style check errors and corrected unaligned memory accesses.] [Fix some minor formatting mistakes.] Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> 11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I First of five patches adding RISC-V to GEM5. This patch introduces the base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation. The multiply, floating point, and atomic memory instructions will be added in additional patches, as well as support for more detailed CPU models. The loader is also modified to be able to parse RISC-V ELF files, and a "Hello world\!" example for RISC-V is added to test-progs. Patch 2 will implement the multiply extension, RV64M; patch 3 will implement the floating point (single- and double-precision) extensions, RV64FD; patch 4 will implement the atomic memory instructions, RV64A, and patch 5 will add support for timing, minor, and detailed CPU models that is missing from the first four patches (such as handling locked memory). [Removed several unused parameters and imports from RiscvInterrupts.py, RiscvISA.py, and RiscvSystem.py.] [Fixed copyright information in RISC-V files copied from elsewhere that had ARM licenses attached.] [Reorganized instruction definitions in decoder.isa so that they are sorted by opcode in preparation for the addition of ISA extensions M, A, F, D.] [Fixed formatting of several files, removed some variables and instructions that were missed when moving them to other patches, fixed RISC-V Foundation copyright attribution, and fixed history of files copied from other architectures using hg copy.] [Fixed indentation of switch cases in isa.cc.] [Reorganized syscall descriptions in linux/process.cc to remove large number of repeated unimplemented system calls and added implmementations to functions that have received them since it process.cc was first created.] [Fixed spacing for some copyright attributions.] [Replaced the rest of the file copies using hg copy.] [Fixed style check errors and corrected unaligned memory accesses.] [Fix some minor formatting mistakes.] Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
/gem5/src/arch/x86/isa/insts/general_purpose/ | ||
H A D | cache_and_memory_management.py | 5920:5a9c976270d6 Wed Feb 25 13:19:00 EST 2009 Gabe Black <gblack@eecs.umich.edu> X86: Implement a basic prefetch instruction. |
/gem5/tests/quick/se/70.twolf/ | ||
H A D | test.py | 11851:824055fe6b30 Wed Nov 09 15:27:00 EST 2016 Brandon Potter <brandon.potter@amd.com> syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead The EIOProcess class was removed recently and it was the only other class which derived from Process. Since every Process invocation is also a LiveProcess invocation, it makes sense to simplify the organization by combining the fields from LiveProcess into Process. |
/gem5/tests/quick/se/04.gpu/ | ||
H A D | test.py | 11851:824055fe6b30 Wed Nov 09 15:27:00 EST 2016 Brandon Potter <brandon.potter@amd.com> syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead The EIOProcess class was removed recently and it was the only other class which derived from Process. Since every Process invocation is also a LiveProcess invocation, it makes sense to simplify the organization by combining the fields from LiveProcess into Process. |
/gem5/src/cpu/simple/ | ||
H A D | noncaching.hh | 13012:5fbc6b9c64bc Tue Mar 15 11:45:00 EDT 2016 Andreas Sandberg <andreas.sandberg@arm.com> cpu: Replace the fastmem with a new CPU model The AtomicSimpleCPU used to be able to access memory directly to speed up simulation if no caches are used. This is fine as long as no switching between CPU models is required. In order to switch to a new CPU model that requires caches, we currently need to checkpoint the system and restore it into a new configuration. The new 'atomic_noncaching' memory mode provides a solution that avoids this issue since caches are bypassed in this mode. This changeset removes the old fastmem option from the AtomicSimpleCPU and introduces a new CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU. The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU used to use when accessing memory in when fastmem was enabled. This changeset also introduces a new switcheroo test that tests switching between a NonCachingSimpleCPU and a TimingSimpleCPU with caches. Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12419 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
/gem5/src/dev/serial/ | ||
H A D | uart8250.cc | 13343:5a7ac3348cd1 Mon Oct 15 22:54:00 EDT 2018 Gabe Black <gabeblack@google.com> dev: Remove using namespace TheISA in uart8250.cc. Nothing in that file is in the TheISA namespace, so there's no reason to use using on it. Change-Id: I279c27af86509f75ac4e340956381041a0dbcdc4 Reviewed-on: https://gem5-review.googlesource.com/c/13537 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> |
/gem5/src/mem/ruby/structures/ | ||
H A D | PersistentTable.cc | 12890:2dcd62e80e96 Mon Feb 19 14:49:00 EST 2018 Brandon Potter <brandon.potter@amd.com> ruby: remove unused code inside '#if 0 ... #endif' The commented code contains bitrot. It is not clear how to fix the code so remove it. The code will not compile if the preprocessor defines are removed. The llocker and uulocker variables that are used as indices into the persistent_randomize array are undefined. It's not clear what they should be from the current code. 5ab13e2deb shows when the lines were last modified. The functionality contained in the comments probably have not been used since that time. (This is an example of why one should never add commented code that is enabled by removing defines. The code rots and sits in the source forever.) Change-Id: I3e0e7c9afc0b6088130e6f319075809fb6f16e5a Reviewed-on: https://gem5-review.googlesource.com/8481 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> |
/gem5/src/cpu/o3/ | ||
H A D | deriv.cc | 13559:e9983a972327 Thu Jan 03 12:45:00 EST 2019 Nikos Nikoleris <nikos.nikoleris@arm.com> cpu-o3: Make the smtFetchPolicy a Param.ScopedEnum The smtFetchPolicy is a parameter in the o3 cpu that can have 5 different values. Previously this setting was done through a string and a parser function would turn it into a c++ enum value. This changeset turns the string into a python Param.ScopedEnum. Change-Id: Iafb4b4b27587541185ea912e5ed581bce09695f5 Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/15396 Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com> Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com> |
Completed in 57 milliseconds