sparc: Move translation constants from isa_traits.hh into tlb.hh.

These aren't used outside of SPARC. Also get rid of some unused
constants.

Change-Id: Icfe119f88189348245a6f225a61e62dfa93ea951
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18470
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Using smart pointers for memory Requests

This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.

Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

arch,cpu: "virtualize" the TLB interface.

CPUs have historically instantiated the architecture specific version
of the TLBs to avoid a virtual function call, making them a little bit
more dependent on what the current ISA is. Some simple performance
measurement, the x86 twolf regression on the atomic CPU, shows that
there isn't actually any performance benefit, and if anything the
simulator goes slightly faster (although still within margin of error)
when the TLB functions are virtual.

This change switches everything outside of the architectures themselves
to use the generic BaseTLB type, and then inside the ISA for them to
cast that to their architecture specific type to call into architecture
specific interfaces.

The ARM TLB needed the most adjustment since it was using non-standard
translation function signatures. Specifically, they all took an extra
"type" parameter which defaulted to normal, and translateTiming
returned a Fault. translateTiming actually doesn't need to return a
Fault because everywhere that consumed it just stored it into a
structure which it then deleted(?), and the fault is stored in the
Translation object when the translation is done.

A little more work is needed to fully obviate the arch/tlb.hh header,
so the TheISA::TLB type is still visible outside of the ISAs.
Specifically, the TlbEntry type is used in the generic PageTable which
lives in src/mem.

Change-Id: I51b68ee74411f9af778317eff222f9349d2ed575
Reviewed-on: https://gem5-review.googlesource.com/6921
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

misc: Rename misc.(hh|cc) to logging.(hh|cc)

These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).

Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

misc: Add missing overrides to appease clang

Since the last round of fixes a few new issues have snuck in. We
should consider switching the regression runs to clang.

misc: Remove redundant compiler-specific defines

This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap
(and similar) abstractions, as these are no longer needed with gcc 4.7
and clang 3.1 as minimum compiler versions.

sim: Refactor the serialization base class

Objects that are can be serialized are supposed to inherit from the
Serializable class. This class is meant to provide a unified API for
such objects. However, so far it has mainly been used by SimObjects
due to some fundamental design limitations. This changeset redesigns
to the serialization interface to make it more generic and hide the
underlying checkpoint storage. Specifically:

* Add a set of APIs to serialize into a subsection of the current
object. Previously, objects that needed this functionality would
use ad-hoc solutions using nameOut() and section name
generation. In the new world, an object that implements the
interface has the methods serializeSection() and
unserializeSection() that serialize into a named /subsection/ of
the current object. Calling serialize() serializes an object into
the current section.

* Move the name() method from Serializable to SimObject as it is no
longer needed for serialization. The fully qualified section name
is generated by the main serialization code on the fly as objects
serialize sub-objects.

* Add a scoped ScopedCheckpointSection helper class. Some objects
need to serialize data structures, that are not deriving from
Serializable, into subsections. Previously, this was done using
nameOut() and manual section name generation. To simplify this,
this changeset introduces a ScopedCheckpointSection() helper
class. When this class is instantiated, it adds a new /subsection/
and subsequent serialization calls during the lifetime of this
helper class happen inside this section (or a subsection in case
of nested sections).

* The serialize() call is now const which prevents accidental state
manipulation during serialization. Objects that rely on modifying
state can use the serializeOld() call instead. The default
implementation simply calls serialize(). Note: The old-style calls
need to be explicitly called using the
serializeOld()/serializeSectionOld() style APIs. These are used by
default when serializing SimObjects.

* Both the input and output checkpoints now use their own named
types. This hides underlying checkpoint implementation from
objects that need checkpointing and makes it easier to change the
underlying checkpoint storage code.

sim: Move the BaseTLB to src/arch/generic/

The TLB-related code is generally architecture dependent and should
live in the arch directory to signify that.

arch: Use shared_ptr for all Faults

This patch takes quite a large step in transitioning from the ad-hoc
RefCountingPtr to the c++11 shared_ptr by adopting its use for all
Faults. There are no changes in behaviour, and the code modifications
are mostly just replacing "new" with "make_shared".

arch, arm: Preserve TLB bootUncacheability when switching CPUs

The ARM TLBs have a bootUncacheability flag used to make some loads
and stores become uncacheable when booting in FS mode. Later the
flag is cleared to let those loads and stores operate as normal. When
doing a takeOverFrom(), this flag's state is not preserved and is
momentarily reset until the CPSR is touched. On single core runs this
is a non-issue. On multi-core runs this can lead to crashes on the O3
CPU model from the following series of events:
1) takeOverFrom executed to switch from Atomic -> O3
2) All bootUncacheability flags are reset to true
3) Core2 tries to execute a load covered by bootUncacheability, it
is flagged as uncacheable
4) Core2's load needs to replay due to a pipeline flush
3) Core1 core does an action on CPSR
4) The handling code for CPSR then checks all other cores
to determine if bootUncacheability can be set to false
5) Asynchronously set bootUncacheability on all cores to false
6) Core2 replays load previously set as uncacheable and notices
it is now flagged as cacheable, leads to a panic.
This patch implements takeOverFrom() functionality for the ARM TLBs
to preserve flag values when switching from atomic -> detailed.

arch: Create a method to finalize physical addresses
in the TLB

Some architectures (currently only x86) require some fixing-up of
physical addresses after a normal address translation. This is usually
to remap devices such as the APIC, but could be used for other memory
mapped devices as well. When running the CPU in a using hardware
virtualization, we still need to do these address fix-ups before
inserting the request into the memory system. This patch moves this
patch allows that code to be used by such CPUs without doing full
address translations.

cpu: Flush TLBs on switchOut()

This changeset inserts a TLB flush in BaseCPU::switchOut to prevent
stale translations when doing repeated switching. Additionally, the
TLB flushing functionality is exported to the Python to make debugging
of switching/checkpointing easier.

A simulation script will typically use the TLB flushing functionality
to generate a reference trace. The following sequence can be used to
simulate a handover (this depends on how drain is implemented, but is
generally the case) between identically configured CPU models:

m5.drain(test_sys)
[ cpu.flushTLBs() for cpu in test_sys.cpu ]
m5.resume(test_sys)

The generated trace should normally be identical to a trace generated
when switching between identically configured CPU models or
checkpointing and resuming.

arch: Add support for invalidating TLBs when draining

This patch adds support for the memInvalidate() drain method. TLB
flushing is requested by calling the virtual flushAll() method on the
TLB.

Note: This patch renames invalidateAll() to flushAll() on x86 and
SPARC to make the interface consistent across all supported
architectures.

Clock: Add a Cycles wrapper class and use where applicable

This patch addresses the comments and feedback on the preceding patch
that reworks the clocks and now more clearly shows where cycles
(relative cycle counts) are used to express time.

Instead of bumping the existing patch I chose to make this a separate
patch, merely to try and focus the discussion around a smaller set of
changes. The two patches will be pushed together though.

This changes done as part of this patch are mostly following directly
from the introduction of the wrapper class, and change enough code to
make things compile and run again. There are definitely more places
where int/uint/Tick is still used to represent cycles, and it will
take some time to chase them all down. Similarly, a lot of parameters
should be changed from Param.Tick and Param.Unsigned to
Param.Cycles.

In addition, the use of curTick is questionable as there should not be
an absolute cycle. Potential solutions can be built on top of this
patch. There is a similar situation in the o3 CPU where
lastRunningCycle is currently counting in Cycles, and is still an
absolute time. More discussion to be had in other words.

An additional change that would be appropriate in the future is to
perform a similar wrapping of Tick and probably also introduce a
Ticks class along with suitable operators for all these classes.

CheckerCPU: Add function stubs to non-ARM ISA source to compile with CheckerCPU

Making the CheckerCPU a runtime time option requires the code to be compatible
with ISAs other than ARM. This patch adds the appropriate function
stubs to allow compilation.

SPARC: Remove the last checks of FULL_SYSTEM.

SPARC: Let the TLB have friends in FS mode.

SPARC: Turn on handleIprRead and handleIprWrite in SE in SPARC.

Fault: Rename sim/fault.hh to fault_fwd.hh to distinguish it from faults.hh.

SPARC: Clean up some historical style issues.

Faults: Pass the StaticInst involved, if any, to a Fault's invoke method.

Also move the "Fault" reference counted pointer type into a separate file,
sim/fault.hh. It would be better to name this less similarly to sim/faults.hh
to reduce confusion, but fault.hh matches the name of the type. We could change
Fault to FaultPtr to match other pointer types, and then changing the name of
the file would make more sense.

tlb: More fixing of unified TLB

tlb: Don't separate the TLB classes into an instruction TLB and a data TLB

CPU: Implement translateTiming which defers to translateAtomic, and convert the timing simple CPU to use it.

ISA: Replace the translate functions in the TLBs with translateAtomic.

sparc: Fix style, create a helper function for translation.
The translate function simplifies code and removes some compiler
warnings in gcc 3.4

TLB: Make a TLB base class and put a virtual demapPage function in it.

params: Deprecate old-style constructors; update most SimObject constructors.

SimObjects not yet updated:
- Process and subclasses
- BaseCPU and subclasses

The SimObject(const std::string &name) constructor was removed. Subclasses
that still rely on that behavior must call the parent initializer as
: SimObject(makeParams(name))

Address Translation: Make SE mode use an actual TLB/MMU for translation like FS.

SPARC: Move tlb state into the tlb.
Each "strand" may need to have a private copy of this state, but I couldn't
find anywhere in the spec that said that after looking briefly.
This prevents writes to the thread context in o3 which was causing the
pipeline to be flushed and stopping any forward progress. The other ASI
accessible state will probably need to be accessed differently if/when we get
O3 full system up and running.

implement vtophys and 32bit gdb support

src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
src/arch/sparc/arguments.hh:
move Copy* to vport since it's generic for all the ISAs
src/arch/sparc/isa_traits.hh:
the Solaris kernel sets up a virtual-> real mapping for all memory starting at SegKPMBase
src/arch/sparc/pagetable.hh:
add a class for getting bits out of the TteTag
src/arch/sparc/remote_gdb.cc:
add 32bit support kinda.... If its 32 bit
src/arch/sparc/remote_gdb.hh:
Add 32bit register offsets too.
src/arch/sparc/tlb.cc:
cleanup generation of tsb pointers
src/arch/sparc/tlb.hh:
add function to return tsb pointers for an address
make lookup public so vtophys can use it
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
write vtophys for sparc
src/base/bitfield.hh:
return a mask of bits first->last
src/mem/vport.cc:
src/mem/vport.hh:
move Copy* here since it's ISA generic

Merge zizzer:/bk/newmem
into zower.eecs.umich.edu:/eecshome/m5/newmem

Merge zizzer:/bk/newmem
into zower.eecs.umich.edu:/eecshome/m5/newmem

src/arch/sparc/isa/formats/mem/blockmem.isa:
src/arch/sparc/isa/operands.isa:
Hand Merge

Compilation fix after messy merge.

Bug fixes in the TLB
Make our replacement algorithm same as legion (although not same as the spec)
itb should be 64 entries not 48

src/arch/sparc/tlb.cc:
Bug fixes in the TLB
Make our replacement algorithm same as legion (although not same as the spec)
src/arch/sparc/tlb.hh:
Make our replacement algorithm same as legion (although not same as the spec)
src/python/m5/objects/SparcTLB.py:
itb should be 64 entries too

Merge zizzer:/bk/sparcfs/
into zower.eecs.umich.edu:/eecshome/m5/sparcfs

Optimized the TLB translations with some caching

Compiler error fix.

Allocate the correct number of global registers
Fix fault formating and code for traps
fix a couple of bugs in the decoder
Cleanup/fix page table entry code
Implement more mmaped iprs, fix numbered tlb insertion code, add function to dump tlb contents
Don't panic if we differ from legion on a tcc instruction because of where legion prints its data and where we print our data

src/arch/sparc/faults.cc:
Fix fault formating and code for traps
src/arch/sparc/intregfile.hh:
allocate the correct number of global registers
src/arch/sparc/isa/decoder.isa:
fix a couple of bugs in the decoder: wrasi should write asi not ccr, done/retry should get hpstate from htstate
src/arch/sparc/pagetable.hh:
cleanup/fix page table code
src/arch/sparc/tlb.cc:
implement more mmaped iprs, fix numbered insertion code, add function to dump tlb contents
src/arch/sparc/tlb.hh:
add functions to write TagAccess register on tlb miss and to dump all tlb entries for debugging
src/cpu/exetrace.cc:
dump tlb entries on error, don't consider differences the cycle we take a trap to be bad.

Add support for mmapped iprs to atomic cpu

src/arch/SConscript:
add mmaped_ipr.hh to switch headers
src/arch/sparc/asi.hh:
make ASI_IMPLICT=0 so by default nothing needs to be done
src/arch/sparc/miscregfile.hh:
miscregfile no longer needs to include asi.hh
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
implement panic instructions for mmaped ipr reads
src/cpu/simple/atomic.cc:
add check for mmaped iprs and handle them if it exists
src/mem/request.hh:
allocate space in the flags for mmaped iprs. Put in in the first 8 bits so that by default its fast. Move the other flags up 8 bits

first cut at a sparc tlb

src/arch/sparc/SConscript:
Add code to serialize/unserialze tlb entries
src/arch/sparc/asi.cc:
src/arch/sparc/asi.hh:
update asi names for how they're listed in the supplement
add asis
add more asi functions
src/arch/sparc/isa_traits.hh:
move the interrupt stuff and some basic address space stuff into isa traits
src/arch/sparc/miscregfile.cc:
src/arch/sparc/miscregfile.hh:
add mmu registers to tlb
get rid of implicit asi stuff... the tlb will handle it
src/arch/sparc/regfile.hh:
make isnt/dataAsid return ints not asis
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
first cut at sparc tlb
src/arch/sparc/vtophys.hh:
pagatable nedes to be included here
src/mem/request.hh:
add asi and if the request is a memory mapped register to the requset object
src/sim/host.hh:
fix incorrect definition of LL

fix endian issues with condition codes
use memcpy instead of bcopy
s/u_int32_t/uint32_t/g
fixup endian code to work with solaris
hack to make sure htole() works... Nate, have a good idea to fix this?

src/arch/sparc/faults.cc:
set the reset address to be 40 bits. Makes PC printing easier at least for now.
src/arch/sparc/isa/base.isa:
fix endian issues with condition codes
src/arch/sparc/tlb.hh:
add implemented physical addres constants
src/arch/sparc/utility.hh:
add tlb.hh to utilities
src/base/loader/raw_object.cc:
add a symbol <filename>_start to the symbol table for binaries files
src/base/remote_gdb.cc:
use memcpy instead of bcopy
src/cpu/exetrace.cc:
clean up printing a bit more
src/cpu/m5legion_interface.h:
add tons to the shared interface
src/dev/ethertap.cc:
s/u_int32_t/uint32_t/g
src/dev/ide_atareg.h:
fixup endian code to work with solaris
src/dev/pcidev.cc:
src/sim/param.hh:
hack to make sure htole() works...

Elaborated on the tlb stubs so that they just set the physical address to the virtual address.

Stubs for SPARC's tlbs

Adjustments for the AlphaTLB changing to AlphaISA::TLB and changing register file functions to not take faults

split off fullsystem and se iprs into two functions to remove lots of #ifs
setup all initialization stuff for UA2005
Setup fullsys build options
Start to make fullsystem compile

src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
RCS to BitKeeper
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add support for doing virtual to physical translation using the in-memory
page table
src/arch/sparc/vtophys.cc:
a tad bit of error checking
src/arch/sparc/vtophys.hh:
Cleanup of full-system global variables, primarily in simple_cpu.cc,
to allow multi-system simulations. (Multiple systems not yet yested
though.) Also changes to build sim_smt in full-system mode (though
with only SimpleCPU and not the full timing CPU for now).

Still to do: minimize changes in SimpleCPU code between full-system
and application modes... way too many ifdefs there. Much of the
full-system stuff moved into SimpleCPU should be put in a new System
object to allow multiprocessor simulations.

Converted last remaining modules from C to C++ (mostly in /old).
Renamed all .c files to .cc and a few .h files to .hh.

Renamed architecture-specific files in arch/$TARGET from
$TARGET.{cc,hh,def} to machine.{cc,hh,def} to get rid of pointless
intermediate files in object directory. Split exo-specific
definitions out of machine.hh into machine_exo.h.

Specifics:

In machine.def, null resource descriptors must be FUClamd_NA (and not
NA) to pass C++ type checking.

Enhanced error checking/reporting in bas
src/arch/sparc/vtophys.cc:
- Get rid of my String class, the Vector class, the bitvector class, and my
doubly linked list class.
- Convert tokenize, to_number (formerly StringToNumber) and eat_white to
function on stl strings.
- Change most cases of char * and const char * to string, or const string &
- Some formatting and style nits, but not too many.
src/arch/sparc/vtophys.cc:
simplify
src/arch/sparc/vtophys.cc:

Renamed SimpleCPU::(read|write)_(byte|half|word|qword) to just read &
write, overloaded on the type of the 'data' argument. Merged the
full-system and non-full-system implementations of these eight
original functions into two common template functions.

To support this, also renamed (read|write)[1248] on memory_object and
derivatives to just read & write, again overloaded on the type of the
'data' argument. Many of these functions could now be condensed into
a few template functions (though with a level of indirection so that
the interface can remain virtual). I did not do that though.
src/arch/sparc/vtophys.cc:
First pass at compiling with gcc 3.x. Lots of "std::" in header files,
"using namespace std" in source files. (Note policy of not putting "using"
statements in headers or before includes in sources.)

Still not able to compile with gcc 3.2.
Errors:
- Can't create an ifstream from a file descriptor anymore (breaks IniFile).
- "`class MSHR::MSHRegister' is private" errors in mshr.cc and prefetch_cache.cc:
not clear why since it's in the public part of the class declaration.
- cpu.cc:879: can't match a reference and 0 (specifically "no match for `bool ?
SimObjectParam<PipeTrace*>& : int' operator")
- pipetrace.cc: "invalid conversion from `int' to `std::_Ios_Fmtflags'"
Warnings:
- strstream now deprecated... needs some rewriting in sat_counter.hh
and hybrid_pred.hh (need to get all that code out of the headers anyway)
- trace.hh macro problem: cpp now says 'pasting "::" and "Event" does not
give a valid preprocessing token'
- major "implicit typename" issues in base/sized.hh
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Implement some interval statistics for full system mode.
Create a callpal function that is called when a callpal occurs so it's easier
to manipulate the statics.
Rework the vtophys stuff to make it a bit cleaner.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Get rid of almost all old-style object names. This commit is equivalent
to running the following script on the current head:

#! /bin/sh

find \( -name '*.cc' -o -name '*.hh' \) -exec perl -pi -e '\
s/\bmemory_object\b(?!\.hh)/FunctionalMemory/g;\
s/\bvirtual_memory\b(?!\.hh)/VirtualMemory/g;\
s/\bmain_memory\b(?!\.hh)/MainMemory/g;\
s/\bphysical_memory\b(?!\.hh)/PhysicalMemory/g;\
s/\bspec_memory\b(?!\.hh)/SpeculativeMemory/g;\
s/\bMemObj\b(?!\.hh)/TimingMemObj/g;\
s/\bmemory_translation\b(?!\.hh)/AddressTranslator/g;\
s/\balpha_tlb\b(?!\.hh)/AlphaTlb/g;\
s/\balpha_itb\b(?!\.hh)/AlphaItb/g;\
s/\balpha_dtb\b(?!\.hh)/AlphaDtb/g;\
s/\bmemory_controller\b(?!\.hh)/MemoryController/g;\
s/\bstorebuffer_t\b(?!\.hh)/StoreBuffer/g;\
s/\bstorebuffer_entry_t\b(?!\.hh)/StoreBufferEntry/g;\
s/\bcreate_vector_t\b(?!\.hh)/CreateVector/g;\
s/\bcv_spec_state\b(?!\.hh)/CreateVecSpecState/g;\
s/\bspec_state_list\b(?!\.hh)/SpecStateList/g;\
s/\bdyn_inst_t\b(?!\.hh)/DynInst/g;' {} \;
src/arch/sparc/vtophys.cc:
since cprintf properly deals with 64-bit types, stop using FMT* as much as
possible
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Change byte_t etc. to C99 standard int8_t etc.
Other than old/host.h, all other changes were produced by this script:

#! /bin/sh

find \( -name '*.cc' -o -name '*.hh' -o -name '*.c' -o -name '*.h' -o -name 'machine.def' \) -exec perl -pi -e '\
s/\bbyte_t\b(?!\.hh)/uint8_t/g;\
s/\bsbyte_t\b(?!\.hh)/int8_t/g;\
s/\bhalf_t\b(?!\.hh)/uint16_t/g;\
s/\bshalf_t\b(?!\.hh)/int16_t/g;\
s/\bword_t\b(?!\.hh)/uint32_t/g;\
s/\bsword_t\b(?!\.hh)/int32_t/g;\
s/\bqword_t\b(?!\.hh)/uint64_t/g;\
s/\bsqword_t\b(?!\.hh)/int64_t/g;\
s/\bbool_t\b(?!\.hh)/bool/g;\
s/\bdfloat_t\b(?!\.hh)/double/g;\
s/\bsfloat_t\b(?!\.hh)/float/g;' {} \;
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add CVS Id tags
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Massive renaming to (almost) eliminate all md_* and MD_* names
in preparation for total exorcism of machine.def.

Most of the changes in this commit were performed with the
following perl script (perl -pi <script> <files>). A small
amount of manual fixup was needed to (mostly getting rid of
the Addr typedefs in the various memory objects now that
the former md_addr_t has that name).

# rename machine-dependent types and constants (will be moving into ISA traits object)
s/md_addr_t/Addr/g;
s/md_intreg_t/IntReg/g;
s/md_gpr_t/IntRegFile/g;
s/md_fpreg_t/FloatReg/g;
s/md_fpr_t/FloatRegFile/g;
s/md_ctrlreg_t/MiscReg/g;
s/md_ctrl_t/MiscRegFile/g;
s/md_ipr_t/InternalProcReg/g;
s/md_anyreg_t/AnyReg/g;
s/md_inst_t/MachInst/g;
s/regs_t/RegFile/g;
# manually fix declaration in old/regs.h and a few forward decls
s/struct RegFile/RegFile/g;
s/MD_NUM_IREGS/NumIntRegs/g;
s/MD_NUM_FREGS/NumFloatRegs/g;
s/MD_NUM_CREGS/NumMiscRegs/g;
s/MD_IPR_NUM/NumInternalProcRegs/g;
s/MD_TOTAL_REGS/TotalNumRegs/g;
s/MD_REG_ZERO/ZeroReg/g;
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
New ISA description system. No more machine.def!
Instructions are now decoded into StaticInst objects, and all static
instruction properties (including execution behavior) are associated
with those objects. Extended documentation in progress.
Currently supports Alpha only; PISA will not compile.
Use END_OF_MACHINE_DOT_DEF tag to extract previous version.
src/arch/sparc/vtophys.cc:
get rid of MD_IPR_foo and call it IPR_foo
add some comments to describe what the various PALtemp registers do
formatting
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
license
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
a little style
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add attribution to license.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Make include paths explicit.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
CopyData and CopyString moved from kernel.cc to vtophys.cc
kernel.cc and kernel.hh moved to kern/tru64
src/arch/sparc/vtophys.hh:
Include isa_traits.hh for Addr
src/arch/sparc/vtophys.cc:
formatting fixes
src/arch/sparc/vtophys.cc:
fix up vtophys to deal with translations if there
is no ptbr, and to deal with PAL addresses
add ptomem which is just a wrapper for dma_addr
src/arch/sparc/vtophys.hh:
add ptomem which is a wrapper for dma_addr with the
same usage as vtomem
src/arch/sparc/vtophys.cc:
Fix to remote debugger while in PAL code
src/arch/sparc/vtophys.cc:
Remote an old hack that is now unnecessary
src/arch/sparc/vtophys.cc:
Removed buggy code that tries to fix PAL addresses (may cause problems
while trying to debug in PAL code, but that should do this fix outside
of vtophys)
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Updated Copyright
src/arch/sparc/vtophys.cc:
added back some code andrew removed and couldn't remember why.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
rename CopyData to CopyOut and implement CopyIn to copy data
from the simulator into the simulatee
src/arch/sparc/vtophys.cc:
fixed a bad merge from linux<->tru64
src/arch/sparc/vtophys.cc:
Check max address pal can be at so we don't do the wrong conversion
if gdb asks for an unaligned access.
src/arch/sparc/vtophys.cc:
PGOFSET -> ALPHA_PGOFSET to avoid include file problems
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
in the arch/alpha directory we should use arch/alpha, not
targetarch. sort includes while we're here.
src/arch/sparc/vtophys.cc:
use new constants, functions and structs to clean up the
vtophys code.
src/arch/sparc/vtophys.hh:
Clean up a little bit and make the protypes match new changes.
src/arch/sparc/vtophys.cc:
deal with isa addition
src/arch/sparc/vtophys.cc:
shuffle files around for new directory structure
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Remove RCS Id string
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Update copyright dates and author list
src/arch/sparc/vtophys.cc:
Added a using directive for AlphaISA
src/arch/sparc/vtophys.hh:
Added the AlphaISA namespace specifier where needed
src/arch/sparc/vtophys.hh:
Made Addr a global type
src/arch/sparc/vtophys.cc:
Change access to the IPR to go through the XC.
src/arch/sparc/vtophys.cc:
Avoid directly accessing objects within the XC.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
fixed for new memory system
put in namespace AlphaISA
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
Remove authors from copyright.
src/arch/sparc/vtophys.cc:
bk cp alpha/vtophys.cc sparc/vtophys.cc
src/arch/sparc/vtophys.hh:
bk cp alpha/vtophys.hh sparc/vtophys.hh
src/arch/sparc/SConscript:
remove fullsystem files that don't exist
src/arch/sparc/isa_traits.hh:
split off fullsystem and se iprs into two functions to remove lots of #ifs
src/arch/sparc/regfile.hh:
split off fullsystem and se iprs into two functions to remove lots of #ifs
setup all initialization stuff for UA2005
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
Add system level tick storage to make stick be syncronized across multiple processors
src/arch/sparc/vtophys.hh:
start to create a vtophys for Sparc
src/base/loader/symtab.hh:
Addr is defined in sim/host.hh