Searched hist:5 (Results 176 - 200 of 1055) sorted by relevance

1234567891011>>

/gem5/src/arch/riscv/isa/formats/
H A Dformats.isadiff 11726:11950d45640b Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 4/5] Added RISC-V atomic memory extension RV64A

Fourth of five patches adding RISC-V to GEM5. This patch adds the RV64A
extension, which includes atomic memory instructions. These instructions
atomically read a value from memory, modify it with a value contained in a
source register, and store the original memory value in the destination
register and modified value back into memory. Because this requires two
memory accesses and GEM5 does not support two timing memory accesses in
a single instruction, each of these instructions is split into two micro-
ops: A "load" micro-op, which reads the memory, and a "store" micro-op,
which modifies and writes it back. Each atomic memory instruction also has
two bits that acquire and release a lock on its memory location.
Additionally, there are atomic load and store instructions that only either
load or store, but not both, and can acquire or release memory locks.

Note that because the current implementation of RISC-V only supports one
core and one thread, it doesn't make sense to make use of AMO instructions.
However, they do form a standard extension of the RISC-V ISA, so they are
included mostly as a placeholder for when multithreaded execution is
implemented. As a result, any tests for their correctness in a future
patch may be abbreviated.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I;
patch 2 implemented the integer multiply extension, RV64M; and patch 3
implemented the single- and double-precision floating point extensions,
RV64FD.

Patch 5 will add support for timing, minor, and detailed CPU models that
isn't present in patches 1-4.

[Added missing file amo.isa]
[Replaced information removed from initial patch that was missed during
division into multiple patches.]
[Fixed some minor formatting issues.]
[Fixed oversight where LR and SC didn't have both AQ and RL flags.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
diff 11726:11950d45640b Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 4/5] Added RISC-V atomic memory extension RV64A

Fourth of five patches adding RISC-V to GEM5. This patch adds the RV64A
extension, which includes atomic memory instructions. These instructions
atomically read a value from memory, modify it with a value contained in a
source register, and store the original memory value in the destination
register and modified value back into memory. Because this requires two
memory accesses and GEM5 does not support two timing memory accesses in
a single instruction, each of these instructions is split into two micro-
ops: A "load" micro-op, which reads the memory, and a "store" micro-op,
which modifies and writes it back. Each atomic memory instruction also has
two bits that acquire and release a lock on its memory location.
Additionally, there are atomic load and store instructions that only either
load or store, but not both, and can acquire or release memory locks.

Note that because the current implementation of RISC-V only supports one
core and one thread, it doesn't make sense to make use of AMO instructions.
However, they do form a standard extension of the RISC-V ISA, so they are
included mostly as a placeholder for when multithreaded execution is
implemented. As a result, any tests for their correctness in a future
patch may be abbreviated.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I;
patch 2 implemented the integer multiply extension, RV64M; and patch 3
implemented the single- and double-precision floating point extensions,
RV64FD.

Patch 5 will add support for timing, minor, and detailed CPU models that
isn't present in patches 1-4.

[Added missing file amo.isa]
[Replaced information removed from initial patch that was missed during
division into multiple patches.]
[Fixed some minor formatting issues.]
[Fixed oversight where LR and SC didn't have both AQ and RL flags.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
diff 11725:eb58f1bbeac8 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 3/5] Added RISCV floating point extensions RV64FD

Third of five patches adding RISC-V to GEM5. This patch adds the RV64FD
extensions, which include single- and double-precision floating point
instructions.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I
and patch 2 implemented the integer multiply extension, RV64M.

Patch 4 will implement the atomic memory instructions, RV64A, and patch
5 will add support for timing, minor, and detailed CPU models that is
missing from the first four patches.

[Fixed exception handling in floating-point instructions to conform better
to IEEE-754 2008 standard and behavior of the Chisel-generated RISC-V
simulator.]
[Fixed style errors in decoder.isa.]
[Fixed some fuzz caused by modifying a previous patch.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
diff 11725:eb58f1bbeac8 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 3/5] Added RISCV floating point extensions RV64FD

Third of five patches adding RISC-V to GEM5. This patch adds the RV64FD
extensions, which include single- and double-precision floating point
instructions.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I
and patch 2 implemented the integer multiply extension, RV64M.

Patch 4 will implement the atomic memory instructions, RV64A, and patch
5 will add support for timing, minor, and detailed CPU models that is
missing from the first four patches.

[Fixed exception handling in floating-point instructions to conform better
to IEEE-754 2008 standard and behavior of the Chisel-generated RISC-V
simulator.]
[Fixed style errors in decoder.isa.]
[Fixed some fuzz caused by modifying a previous patch.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
/gem5/src/arch/riscv/isa/
H A Doperands.isadiff 11726:11950d45640b Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 4/5] Added RISC-V atomic memory extension RV64A

Fourth of five patches adding RISC-V to GEM5. This patch adds the RV64A
extension, which includes atomic memory instructions. These instructions
atomically read a value from memory, modify it with a value contained in a
source register, and store the original memory value in the destination
register and modified value back into memory. Because this requires two
memory accesses and GEM5 does not support two timing memory accesses in
a single instruction, each of these instructions is split into two micro-
ops: A "load" micro-op, which reads the memory, and a "store" micro-op,
which modifies and writes it back. Each atomic memory instruction also has
two bits that acquire and release a lock on its memory location.
Additionally, there are atomic load and store instructions that only either
load or store, but not both, and can acquire or release memory locks.

Note that because the current implementation of RISC-V only supports one
core and one thread, it doesn't make sense to make use of AMO instructions.
However, they do form a standard extension of the RISC-V ISA, so they are
included mostly as a placeholder for when multithreaded execution is
implemented. As a result, any tests for their correctness in a future
patch may be abbreviated.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I;
patch 2 implemented the integer multiply extension, RV64M; and patch 3
implemented the single- and double-precision floating point extensions,
RV64FD.

Patch 5 will add support for timing, minor, and detailed CPU models that
isn't present in patches 1-4.

[Added missing file amo.isa]
[Replaced information removed from initial patch that was missed during
division into multiple patches.]
[Fixed some minor formatting issues.]
[Fixed oversight where LR and SC didn't have both AQ and RL flags.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
diff 11726:11950d45640b Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 4/5] Added RISC-V atomic memory extension RV64A

Fourth of five patches adding RISC-V to GEM5. This patch adds the RV64A
extension, which includes atomic memory instructions. These instructions
atomically read a value from memory, modify it with a value contained in a
source register, and store the original memory value in the destination
register and modified value back into memory. Because this requires two
memory accesses and GEM5 does not support two timing memory accesses in
a single instruction, each of these instructions is split into two micro-
ops: A "load" micro-op, which reads the memory, and a "store" micro-op,
which modifies and writes it back. Each atomic memory instruction also has
two bits that acquire and release a lock on its memory location.
Additionally, there are atomic load and store instructions that only either
load or store, but not both, and can acquire or release memory locks.

Note that because the current implementation of RISC-V only supports one
core and one thread, it doesn't make sense to make use of AMO instructions.
However, they do form a standard extension of the RISC-V ISA, so they are
included mostly as a placeholder for when multithreaded execution is
implemented. As a result, any tests for their correctness in a future
patch may be abbreviated.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I;
patch 2 implemented the integer multiply extension, RV64M; and patch 3
implemented the single- and double-precision floating point extensions,
RV64FD.

Patch 5 will add support for timing, minor, and detailed CPU models that
isn't present in patches 1-4.

[Added missing file amo.isa]
[Replaced information removed from initial patch that was missed during
division into multiple patches.]
[Fixed some minor formatting issues.]
[Fixed oversight where LR and SC didn't have both AQ and RL flags.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
diff 11725:eb58f1bbeac8 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 3/5] Added RISCV floating point extensions RV64FD

Third of five patches adding RISC-V to GEM5. This patch adds the RV64FD
extensions, which include single- and double-precision floating point
instructions.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I
and patch 2 implemented the integer multiply extension, RV64M.

Patch 4 will implement the atomic memory instructions, RV64A, and patch
5 will add support for timing, minor, and detailed CPU models that is
missing from the first four patches.

[Fixed exception handling in floating-point instructions to conform better
to IEEE-754 2008 standard and behavior of the Chisel-generated RISC-V
simulator.]
[Fixed style errors in decoder.isa.]
[Fixed some fuzz caused by modifying a previous patch.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
diff 11725:eb58f1bbeac8 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 3/5] Added RISCV floating point extensions RV64FD

Third of five patches adding RISC-V to GEM5. This patch adds the RV64FD
extensions, which include single- and double-precision floating point
instructions.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I
and patch 2 implemented the integer multiply extension, RV64M.

Patch 4 will implement the atomic memory instructions, RV64A, and patch
5 will add support for timing, minor, and detailed CPU models that is
missing from the first four patches.

[Fixed exception handling in floating-point instructions to conform better
to IEEE-754 2008 standard and behavior of the Chisel-generated RISC-V
simulator.]
[Fixed style errors in decoder.isa.]
[Fixed some fuzz caused by modifying a previous patch.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Dbitfields.isadiff 13931:31e62b71cca6 Thu Apr 04 16:20:00 EDT 2019 Avishai Tvila <avishai.tvila@gmail.com> arch-riscv,isa: Fix for compressed jump (c_j) imm

c_j(al) has a special format, called CJ.
The jump offset format is instbits[12:2] --> offset[11|4|9:8|10|6|7|3:1|5]
Currently in decoder.isa, c_j format is JOp, the imm and branchTarget are incorrect
In the execute section (decoder.isa:228), the imm fields is ignored and the offset is calculated correctlly.
As a result, we get decoder flush for each c_j instance
I've added CJOp format in compressed.isa, and use it in execute section.
In addition, c_j is mappped to jal zero, cj_imm, and actually is neither indirect control nor a function call
I fixed the flags accordently.
I'll fix all IsRet, IsCall and IsIndirectControl flags for rest of (c_)jal(r) in my next commit.
I ran coremark -O0 before my fix and I got 37.7% branch miss-rate, after the fix the branch miss-rate is <13%

Change-Id: I608d5894a78a1ebefe36f21e21aaea68b42bccfc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17808
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Alec Roelke <alec.roelke@gmail.com>
diff 11726:11950d45640b Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 4/5] Added RISC-V atomic memory extension RV64A

Fourth of five patches adding RISC-V to GEM5. This patch adds the RV64A
extension, which includes atomic memory instructions. These instructions
atomically read a value from memory, modify it with a value contained in a
source register, and store the original memory value in the destination
register and modified value back into memory. Because this requires two
memory accesses and GEM5 does not support two timing memory accesses in
a single instruction, each of these instructions is split into two micro-
ops: A "load" micro-op, which reads the memory, and a "store" micro-op,
which modifies and writes it back. Each atomic memory instruction also has
two bits that acquire and release a lock on its memory location.
Additionally, there are atomic load and store instructions that only either
load or store, but not both, and can acquire or release memory locks.

Note that because the current implementation of RISC-V only supports one
core and one thread, it doesn't make sense to make use of AMO instructions.
However, they do form a standard extension of the RISC-V ISA, so they are
included mostly as a placeholder for when multithreaded execution is
implemented. As a result, any tests for their correctness in a future
patch may be abbreviated.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I;
patch 2 implemented the integer multiply extension, RV64M; and patch 3
implemented the single- and double-precision floating point extensions,
RV64FD.

Patch 5 will add support for timing, minor, and detailed CPU models that
isn't present in patches 1-4.

[Added missing file amo.isa]
[Replaced information removed from initial patch that was missed during
division into multiple patches.]
[Fixed some minor formatting issues.]
[Fixed oversight where LR and SC didn't have both AQ and RL flags.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
diff 11726:11950d45640b Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 4/5] Added RISC-V atomic memory extension RV64A

Fourth of five patches adding RISC-V to GEM5. This patch adds the RV64A
extension, which includes atomic memory instructions. These instructions
atomically read a value from memory, modify it with a value contained in a
source register, and store the original memory value in the destination
register and modified value back into memory. Because this requires two
memory accesses and GEM5 does not support two timing memory accesses in
a single instruction, each of these instructions is split into two micro-
ops: A "load" micro-op, which reads the memory, and a "store" micro-op,
which modifies and writes it back. Each atomic memory instruction also has
two bits that acquire and release a lock on its memory location.
Additionally, there are atomic load and store instructions that only either
load or store, but not both, and can acquire or release memory locks.

Note that because the current implementation of RISC-V only supports one
core and one thread, it doesn't make sense to make use of AMO instructions.
However, they do form a standard extension of the RISC-V ISA, so they are
included mostly as a placeholder for when multithreaded execution is
implemented. As a result, any tests for their correctness in a future
patch may be abbreviated.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I;
patch 2 implemented the integer multiply extension, RV64M; and patch 3
implemented the single- and double-precision floating point extensions,
RV64FD.

Patch 5 will add support for timing, minor, and detailed CPU models that
isn't present in patches 1-4.

[Added missing file amo.isa]
[Replaced information removed from initial patch that was missed during
division into multiple patches.]
[Fixed some minor formatting issues.]
[Fixed oversight where LR and SC didn't have both AQ and RL flags.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
diff 11725:eb58f1bbeac8 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 3/5] Added RISCV floating point extensions RV64FD

Third of five patches adding RISC-V to GEM5. This patch adds the RV64FD
extensions, which include single- and double-precision floating point
instructions.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I
and patch 2 implemented the integer multiply extension, RV64M.

Patch 4 will implement the atomic memory instructions, RV64A, and patch
5 will add support for timing, minor, and detailed CPU models that is
missing from the first four patches.

[Fixed exception handling in floating-point instructions to conform better
to IEEE-754 2008 standard and behavior of the Chisel-generated RISC-V
simulator.]
[Fixed style errors in decoder.isa.]
[Fixed some fuzz caused by modifying a previous patch.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
diff 11725:eb58f1bbeac8 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 3/5] Added RISCV floating point extensions RV64FD

Third of five patches adding RISC-V to GEM5. This patch adds the RV64FD
extensions, which include single- and double-precision floating point
instructions.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I
and patch 2 implemented the integer multiply extension, RV64M.

Patch 4 will implement the atomic memory instructions, RV64A, and patch
5 will add support for timing, minor, and detailed CPU models that is
missing from the first four patches.

[Fixed exception handling in floating-point instructions to conform better
to IEEE-754 2008 standard and behavior of the Chisel-generated RISC-V
simulator.]
[Fixed style errors in decoder.isa.]
[Fixed some fuzz caused by modifying a previous patch.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
/gem5/src/arch/arm/linux/
H A Dlinux.ccdiff 11383:5ac090acd180 Thu Mar 17 13:24:00 EDT 2016 Brandon Potter <brandon.potter@amd.com> syscall_emul: extend mmap system call to support file backed mmaps

For O3, which has a stat that counts reg reads, there is an additional
reg read per mmap() call since there's an arg we no longer ignore.
Otherwise, stats should not be affected.
diff 10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
diff 7799:5d0f62927d75 Mon Dec 20 16:24:00 EST 2010 Gabe Black <gblack@eecs.umich.edu> Style: Replace some tabs with spaces.
H A Dprocess.hhdiff 11851:824055fe6b30 Wed Nov 09 15:27:00 EST 2016 Brandon Potter <brandon.potter@amd.com> syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead

The EIOProcess class was removed recently and it was the only other class
which derived from Process. Since every Process invocation is also a
LiveProcess invocation, it makes sense to simplify the organization by
combining the fields from LiveProcess into Process.
diff 10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
diff 6236:9c0f2130478b Wed Jun 10 02:41:00 EDT 2009 Gabe Black <gblack@eecs.umich.edu> ARM: Hook in the mmap2 system call. Make ArmLinuxProcess handle 5,6 syscall params.
/gem5/ext/libelf/
H A Delf_common.hdiff 11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
diff 11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
diff 10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
/gem5/src/cpu/
H A Dreg_class.ccdiff 13610:5d5404ac6288 Tue Oct 16 11:04:00 EDT 2018 Giacomo Gabrielli <giacomo.gabrielli@arm.com> arch,cpu: Add vector predicate registers

Latest-gen. vector/SIMD extensions, including the Arm Scalable Vector
Extension (SVE), introduce the notion of a predicate register file.
This changeset adds this feature across architectures and CPU models.

Change-Id: Iebcadbad89c0a582ff8b1b70de353305db603946
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13715
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
diff 10935:acd48ddd725f Tue Jul 28 02:58:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> revert 5af8f40d8f2c
diff 10934:5af8f40d8f2c Sun Jul 26 11:21:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> cpu: implements vector registers

This adds a vector register type. The type is defined as a std::array of a
fixed number of uint64_ts. The isa_parser.py has been modified to parse vector
register operands and generate the required code. Different cpus have vector
register files now.
H A DStaticInstFlags.pydiff 10935:acd48ddd725f Tue Jul 28 02:58:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> revert 5af8f40d8f2c
diff 10934:5af8f40d8f2c Sun Jul 26 11:21:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> cpu: implements vector registers

This adds a vector register type. The type is defined as a std::array of a
fixed number of uint64_ts. The isa_parser.py has been modified to parse vector
register operands and generate the required code. Different cpus have vector
register files now.
/gem5/src/arch/riscv/
H A Dfaults.hhdiff 13547:2aff46b9bbc5 Sun Feb 18 22:28:00 EST 2018 Alec Roelke <ar4jc@virginia.edu> arch-riscv: Fix reset function and style

In addition to fixing some style issues with resetting, this patch fixes
what happens on reset. The RISC-V privileged ISA reference manual says
that,
on reset:
1. Privilege mode is set to M
2. mstatus.mie <- 0; mstatus.mprv <- 0
3. PC <- reset vector
4. mcause <- reset cause (0 if there is no distinguishing causes)
5. Everything else is undefined
Because of 5, everything else will be left alone

Change-Id: I81bdf7a88b08874e3c3d5fc6c7f3ca2d796496b8
Reviewed-on: https://gem5-review.googlesource.com/c/14376
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
diff 13547:2aff46b9bbc5 Sun Feb 18 22:28:00 EST 2018 Alec Roelke <ar4jc@virginia.edu> arch-riscv: Fix reset function and style

In addition to fixing some style issues with resetting, this patch fixes
what happens on reset. The RISC-V privileged ISA reference manual says
that,
on reset:
1. Privilege mode is set to M
2. mstatus.mie <- 0; mstatus.mprv <- 0
3. PC <- reset vector
4. mcause <- reset cause (0 if there is no distinguishing causes)
5. Everything else is undefined
Because of 5, everything else will be left alone

Change-Id: I81bdf7a88b08874e3c3d5fc6c7f3ca2d796496b8
Reviewed-on: https://gem5-review.googlesource.com/c/14376
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
diff 11725:eb58f1bbeac8 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 3/5] Added RISCV floating point extensions RV64FD

Third of five patches adding RISC-V to GEM5. This patch adds the RV64FD
extensions, which include single- and double-precision floating point
instructions.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I
and patch 2 implemented the integer multiply extension, RV64M.

Patch 4 will implement the atomic memory instructions, RV64A, and patch
5 will add support for timing, minor, and detailed CPU models that is
missing from the first four patches.

[Fixed exception handling in floating-point instructions to conform better
to IEEE-754 2008 standard and behavior of the Chisel-generated RISC-V
simulator.]
[Fixed style errors in decoder.isa.]
[Fixed some fuzz caused by modifying a previous patch.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
diff 11725:eb58f1bbeac8 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 3/5] Added RISCV floating point extensions RV64FD

Third of five patches adding RISC-V to GEM5. This patch adds the RV64FD
extensions, which include single- and double-precision floating point
instructions.

Patch 1 introduced RISC-V and implemented the base instruction set, RV64I
and patch 2 implemented the integer multiply extension, RV64M.

Patch 4 will implement the atomic memory instructions, RV64A, and patch
5 will add support for timing, minor, and detailed CPU models that is
missing from the first four patches.

[Fixed exception handling in floating-point instructions to conform better
to IEEE-754 2008 standard and behavior of the Chisel-generated RISC-V
simulator.]
[Fixed style errors in decoder.isa.]
[Fixed some fuzz caused by modifying a previous patch.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Dkernel_stats.hh11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Dpagetable.hh11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Dpseudo_inst.hh11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Dsystem.hh11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Dsystem.cc11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A DRiscvSystem.py11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A DRiscvTLB.py11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
/gem5/src/base/
H A Ddebug.hhdiff 8269:5a9a639ce16f Wed May 04 10:08:00 EDT 2011 Nathan Binkert <nate@binkert.org> debug: fix help output
5882:5a047c3f3795 Mon Feb 23 14:48:00 EST 2009 Nathan Binkert <nate@binkert.org> debug: Move debug_break into src/base
H A Ddebug.ccdiff 8269:5a9a639ce16f Wed May 04 10:08:00 EDT 2011 Nathan Binkert <nate@binkert.org> debug: fix help output
5882:5a047c3f3795 Mon Feb 23 14:48:00 EST 2009 Nathan Binkert <nate@binkert.org> debug: Move debug_break into src/base
/gem5/util/tlm/examples/master_port/
H A Dmain.ccdiff 11822:9018cadf6c87 Thu Feb 09 19:15:00 EST 2017 Christian Menard <Christian.Menard@tu-dresden.de> misc: Clean up and complete the gem5<->SystemC-TLM bridge [5/10]

Changeset 11798:3a490c57058d
---------------------------
misc: Clean up and complete the gem5<->SystemC-TLM bridge [5/10]

The current TLM bridge only provides a Slave Port that allows the gem5
world to send request to the SystemC world. This patch series refractors
and cleans up the existing code, and adds a Master Port that allows the
SystemC world to send requests to the gem5 world.

This patch:
* Introduce transactor modules that represent the gem5 ports in the
* SystemC world.
* Update the SimControl module and let it keep track of the gem5 ports.

Reviewed at http://reviews.gem5.org/r/3775/

Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
diff 11822:9018cadf6c87 Thu Feb 09 19:15:00 EST 2017 Christian Menard <Christian.Menard@tu-dresden.de> misc: Clean up and complete the gem5<->SystemC-TLM bridge [5/10]

Changeset 11798:3a490c57058d
---------------------------
misc: Clean up and complete the gem5<->SystemC-TLM bridge [5/10]

The current TLM bridge only provides a Slave Port that allows the gem5
world to send request to the SystemC world. This patch series refractors
and cleans up the existing code, and adds a Master Port that allows the
SystemC world to send requests to the gem5 world.

This patch:
* Introduce transactor modules that represent the gem5 ports in the
* SystemC world.
* Update the SimControl module and let it keep track of the gem5 ports.

Reviewed at http://reviews.gem5.org/r/3775/

Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
/gem5/util/tlm/examples/slave_port/
H A Dmain.ccdiff 11822:9018cadf6c87 Thu Feb 09 19:15:00 EST 2017 Christian Menard <Christian.Menard@tu-dresden.de> misc: Clean up and complete the gem5<->SystemC-TLM bridge [5/10]

Changeset 11798:3a490c57058d
---------------------------
misc: Clean up and complete the gem5<->SystemC-TLM bridge [5/10]

The current TLM bridge only provides a Slave Port that allows the gem5
world to send request to the SystemC world. This patch series refractors
and cleans up the existing code, and adds a Master Port that allows the
SystemC world to send requests to the gem5 world.

This patch:
* Introduce transactor modules that represent the gem5 ports in the
* SystemC world.
* Update the SimControl module and let it keep track of the gem5 ports.

Reviewed at http://reviews.gem5.org/r/3775/

Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
diff 11822:9018cadf6c87 Thu Feb 09 19:15:00 EST 2017 Christian Menard <Christian.Menard@tu-dresden.de> misc: Clean up and complete the gem5<->SystemC-TLM bridge [5/10]

Changeset 11798:3a490c57058d
---------------------------
misc: Clean up and complete the gem5<->SystemC-TLM bridge [5/10]

The current TLM bridge only provides a Slave Port that allows the gem5
world to send request to the SystemC world. This patch series refractors
and cleans up the existing code, and adds a Master Port that allows the
SystemC world to send requests to the gem5 world.

This patch:
* Introduce transactor modules that represent the gem5 ports in the
* SystemC world.
* Update the SimControl module and let it keep track of the gem5 ports.

Reviewed at http://reviews.gem5.org/r/3775/

Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
/gem5/src/arch/power/insts/
H A Dstatic_inst.ccdiff 10935:acd48ddd725f Tue Jul 28 02:58:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> revert 5af8f40d8f2c
diff 10934:5af8f40d8f2c Sun Jul 26 11:21:00 EDT 2015 Nilay Vaish <nilay@cs.wisc.edu> cpu: implements vector registers

This adds a vector register type. The type is defined as a std::array of a
fixed number of uint64_ts. The isa_parser.py has been modified to parse vector
register operands and generate the required code. Different cpus have vector
register files now.
/gem5/src/arch/arm/isa/insts/
H A Dstr64.isadiff 12219:5c42cf79d862 Wed Jul 12 08:49:00 EDT 2017 Nikos Nikoleris <nikos.nikoleris@arm.com> arch-arm: Signal an event when executing store exclusives

When a store exclusive is executed, whether it is successful or not,
the exclusives monitor is cleared and therefore we need to signal an
event for the PE.

Change-Id: I383c88c769c0ac5f5d36c4b5d39c9681134d3a20
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4480
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
/gem5/src/arch/x86/isa/insts/system/
H A Dsegmentation.pydiff 5927:5e3367b103da Wed Feb 25 13:20:00 EST 2009 Gabe Black <gblack@eecs.umich.edu> X86: Do a merge for the zero extension microop.
5291:5d38610cff05 Sun Dec 02 02:01:00 EST 2007 Gabe Black <gblack@eecs.umich.edu> X86: Implement the lgdt instruction.
/gem5/src/arch/arm/isa/decoder/
H A Ddecoder.isadiff 10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
7117:5d18ca349ca1 Wed Jun 02 01:58:00 EDT 2010 Gabe Black <gblack@eecs.umich.edu> ARM: Create a "decoder" directory for the files implementing the decoder.
/gem5/src/arch/riscv/linux/
H A Dlinux.cc11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>

Completed in 45 milliseconds

1234567891011>>