Searched hist:31 (Results 526 - 550 of 1011) sorted by relevance

<<21222324252627282930>>

/gem5/src/mem/cache/prefetch/
H A Dtagged.ccdiff 10623:b9646f4546ad Tue Dec 23 09:31:00 EST 2014 Mitch Hayenga <mitch.hayenga@arm.com> mem: Rework the structuring of the prefetchers

Re-organizes the prefetcher class structure. Previously the
BasePrefetcher forced multiple assumptions on the prefetchers that
inherited from it. This patch makes the BasePrefetcher class truly
representative of base functionality. For example, the base class no
longer enforces FIFO order. Instead, prefetchers with FIFO requests
(like the existing stride and tagged prefetchers) now inherit from a
new QueuedPrefetcher base class.

Finally, the stride-based prefetcher now assumes a custimizable lookup table
(sets/ways) rather than the previous fully associative structure.
H A DPrefetcher.pydiff 13772:31b71dadc472 Thu Mar 07 09:42:00 EST 2019 Javier Bueno <javier.bueno@metempsy.com> mem-cache: Added the Indirect Memory Prefetcher

Reference:
Xiangyao Yu, Christopher J. Hughes, Nadathur Satish, and Srinivas Devadas.
2015. IMP: indirect memory prefetcher. In Proceedings of the 48th
International Symposium on Microarchitecture (MICRO-48). ACM,
New York, NY, USA, 178-190. DOI: https://doi.org/10.1145/2830772.2830807

Change-Id: I52790f69c13ec55b8c1c8b9396ef9a1fb1be9797
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/16223
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
diff 13700:56fa28e6fab4 Thu Jan 31 10:24:00 EST 2019 Javier Bueno <javier.bueno@metempsy.com> mem-cache: Added the Slim AMPM Prefetcher

Reference:
Towards Bandwidth-Efficient Prefetching with Slim AMPM.
Young, V., & Krishna, A. (2015). The 2nd Data Prefetching Championship.

Slim AMPM is composed of two prefetchers, the DPCT and the AMPM (both already
in gem5).

Change-Id: I6e868faf216e3e75231cf181d59884ed6f0d382a
Reviewed-on: https://gem5-review.googlesource.com/c/16383
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
diff 13667:e3ae3619b9ab Tue Feb 05 17:31:00 EST 2019 Javier Bueno <javier.bueno@metempsy.com> mem-cache: Added the Delta Correlating Prediction Tables Prefetcher

Reference:
Multi-level hardware prefetching using low complexity delta correlating
prediction tables with partial matching.
Marius Grannaes, Magnus Jahre, and Lasse Natvig. 2010.
In Proceedings of the 5th international conference on High Performance
Embedded Architectures and Compilers (HiPEAC'10)
Change-Id: I7b5d7ede9284862a427cfd5693a47652a69ed49d
Reviewed-on: https://gem5-review.googlesource.com/c/16062
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
diff 10623:b9646f4546ad Tue Dec 23 09:31:00 EST 2014 Mitch Hayenga <mitch.hayenga@arm.com> mem: Rework the structuring of the prefetchers

Re-organizes the prefetcher class structure. Previously the
BasePrefetcher forced multiple assumptions on the prefetchers that
inherited from it. This patch makes the BasePrefetcher class truly
representative of base functionality. For example, the base class no
longer enforces FIFO order. Instead, prefetchers with FIFO requests
(like the existing stride and tagged prefetchers) now inherit from a
new QueuedPrefetcher base class.

Finally, the stride-based prefetcher now assumes a custimizable lookup table
(sets/ways) rather than the previous fully associative structure.
/gem5/src/python/pybind11/
H A Devent.ccdiff 12172:33b5ccf51d7f Mon Jul 31 06:19:00 EDT 2017 Andreas Sandberg <andreas.sandberg@arm.com> python: Make GlobalExitEvent.getCode() return an int

PyBind normally casts integers returned from the C to long in
Python. This is normally fine since long in most cases behaves just
like an int. However, when passing the return value from getcode() to
sys.exit, unexpected behavior ensues. Due to the way the function is
defined, any type other than int (with the exception of None) will be
treated as an error and be equivalent to sys.exit(1).

Since we frequently use the sys.exit(event.getCode()) pattern, we need
to ensure that the function returns an integer. This change adds an
explicit type conversion to a Python integer in the wrapper code.

Change-Id: I73d6b881025064afa2b2e6eb4512fa2a4b0a87da
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4280
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Joe Gross <joe.gross@amd.com>
/gem5/src/systemc/core/
H A DSystemC.pydiff 13081:fd1b50840830 Wed Aug 22 23:31:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Keep track of how sc_main completes and expose that to python.

That makes it possible for the config script to retrieve the result of
running sc_main. sc_main (or at least the python front end for it)
can't return results directly since it usually doesn't run to
completion when it's first called.

Change-Id: I9740e9688571e2ca824a684be70480f1eadddcdb
Reviewed-on: https://gem5-review.googlesource.com/12253
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
/gem5/util/stats/
H A Dprofile.pydiff 2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
/gem5/src/arch/riscv/isa/formats/
H A Dcompressed.isadiff 13931:31e62b71cca6 Thu Apr 04 16:20:00 EDT 2019 Avishai Tvila <avishai.tvila@gmail.com> arch-riscv,isa: Fix for compressed jump (c_j) imm

c_j(al) has a special format, called CJ.
The jump offset format is instbits[12:2] --> offset[11|4|9:8|10|6|7|3:1|5]
Currently in decoder.isa, c_j format is JOp, the imm and branchTarget are incorrect
In the execute section (decoder.isa:228), the imm fields is ignored and the offset is calculated correctlly.
As a result, we get decoder flush for each c_j instance
I've added CJOp format in compressed.isa, and use it in execute section.
In addition, c_j is mappped to jal zero, cj_imm, and actually is neither indirect control nor a function call
I fixed the flags accordently.
I'll fix all IsRet, IsCall and IsIndirectControl flags for rest of (c_)jal(r) in my next commit.
I ran coremark -O0 before my fix and I got 37.7% branch miss-rate, after the fix the branch miss-rate is <13%

Change-Id: I608d5894a78a1ebefe36f21e21aaea68b42bccfc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17808
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Alec Roelke <alec.roelke@gmail.com>
/gem5/src/arch/x86/bios/
H A Dintelmp.ccdiff 8737:770ccf3af571 Tue Jan 31 00:05:00 EST 2012 Koan-Sin Tan <koansin.tan@gmail.com> clang: Enable compiling gem5 using clang 2.9 and 3.0

This patch adds the necessary flags to the SConstruct and SConscript
files for compiling using clang 2.9 and later (on Ubuntu et al and OSX
XCode 4.2), and also cleans up a bunch of compiler warnings found by
clang. Most of the warnings are related to hidden virtual functions,
comparisons with unsigneds >= 0, and if-statements with empty
bodies. A number of mismatches between struct and class are also
fixed. clang 2.8 is not working as it has problems with class names
that occur in multiple namespaces (e.g. Statistics in
kernel_stats.hh).

clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which
causes confusion between the container std::set and the function
Packet::set, and this is currently addressed by not including the
entire namespace std, but rather selecting e.g. "using std::vector" in
the appropriate places.
/gem5/src/cpu/o3/
H A Drob_impl.hhdiff 10231:cb2e6950956d Sat May 31 21:00:00 EDT 2014 Steve Reinhardt <steve.reinhardt@amd.com> style: eliminate equality tests with true and false

Using '== true' in a boolean expression is totally redundant,
and using '== false' is pretty verbose (and arguably less
readable in most cases) compared to '!'.

It's somewhat of a pet peeve, perhaps, but I had some time
waiting for some tests to run and decided to clean these up.

Unfortunately, SLICC appears not to have the '!' operator,
so I had to leave the '== false' tests in the SLICC code.
diff 9954:72a72649a156 Thu Oct 31 14:41:00 EDT 2013 Faissal Sleiman <Faissal.Sleiman@arm.com> cpu: Construct ROB with cpu params struct instead of each variable

Most other structures/stages get passed the cpu params struct.
diff 7720:65d338a8dba4 Sun Oct 31 03:07:00 EDT 2010 Gabe Black <gblack@eecs.umich.edu> ISA,CPU,etc: Create an ISA defined PC type that abstracts out ISA behaviors.



This change is a low level and pervasive reorganization of how PCs are managed
in M5. Back when Alpha was the only ISA, there were only 2 PCs to worry about,
the PC and the NPC, and the lsb of the PC signaled whether or not you were in
PAL mode. As other ISAs were added, we had to add an NNPC, micro PC and next
micropc, x86 and ARM introduced variable length instruction sets, and ARM
started to keep track of mode bits in the PC. Each CPU model handled PCs in
its own custom way that needed to be updated individually to handle the new
dimensions of variability, or, in the case of ARMs mode-bit-in-the-pc hack,
the complexity could be hidden in the ISA at the ISA implementation's expense.
Areas like the branch predictor hadn't been updated to handle branch delay
slots or micropcs, and it turns out that had introduced a significant (10s of
percent) performance bug in SPARC and to a lesser extend MIPS. Rather than
perpetuate the problem by reworking O3 again to handle the PC features needed
by x86, this change was introduced to rework PC handling in a more modular,
transparent, and hopefully efficient way.


PC type:

Rather than having the superset of all possible elements of PC state declared
in each of the CPU models, each ISA defines its own PCState type which has
exactly the elements it needs. A cross product of canned PCState classes are
defined in the new "generic" ISA directory for ISAs with/without delay slots
and microcode. These are either typedef-ed or subclassed by each ISA. To read
or write this structure through a *Context, you use the new pcState() accessor
which reads or writes depending on whether it has an argument. If you just
want the address of the current or next instruction or the current micro PC,
you can get those through read-only accessors on either the PCState type or
the *Contexts. These are instAddr(), nextInstAddr(), and microPC(). Note the
move away from readPC. That name is ambiguous since it's not clear whether or
not it should be the actual address to fetch from, or if it should have extra
bits in it like the PAL mode bit. Each class is free to define its own
functions to get at whatever values it needs however it needs to to be used in
ISA specific code. Eventually Alpha's PAL mode bit could be moved out of the
PC and into a separate field like ARM.

These types can be reset to a particular pc (where npc = pc +
sizeof(MachInst), nnpc = npc + sizeof(MachInst), upc = 0, nupc = 1 as
appropriate), printed, serialized, and compared. There is a branching()
function which encapsulates code in the CPU models that checked if an
instruction branched or not. Exactly what that means in the context of branch
delay slots which can skip an instruction when not taken is ambiguous, and
ideally this function and its uses can be eliminated. PCStates also generally
know how to advance themselves in various ways depending on if they point at
an instruction, a microop, or the last microop of a macroop. More on that
later.

Ideally, accessing all the PCs at once when setting them will improve
performance of M5 even though more data needs to be moved around. This is
because often all the PCs need to be manipulated together, and by getting them
all at once you avoid multiple function calls. Also, the PCs of a particular
thread will have spatial locality in the cache. Previously they were grouped
by element in arrays which spread out accesses.


Advancing the PC:

The PCs were previously managed entirely by the CPU which had to know about PC
semantics, try to figure out which dimension to increment the PC in, what to
set NPC/NNPC, etc. These decisions are best left to the ISA in conjunction
with the PC type itself. Because most of the information about how to
increment the PC (mainly what type of instruction it refers to) is contained
in the instruction object, a new advancePC virtual function was added to the
StaticInst class. Subclasses provide an implementation that moves around the
right element of the PC with a minimal amount of decision making. In ISAs like
Alpha, the instructions always simply assign NPC to PC without having to worry
about micropcs, nnpcs, etc. The added cost of a virtual function call should
be outweighed by not having to figure out as much about what to do with the
PCs and mucking around with the extra elements.

One drawback of making the StaticInsts advance the PC is that you have to
actually have one to advance the PC. This would, superficially, seem to
require decoding an instruction before fetch could advance. This is, as far as
I can tell, realistic. fetch would advance through memory addresses, not PCs,
perhaps predicting new memory addresses using existing ones. More
sophisticated decisions about control flow would be made later on, after the
instruction was decoded, and handed back to fetch. If branching needs to
happen, some amount of decoding needs to happen to see that it's a branch,
what the target is, etc. This could get a little more complicated if that gets
done by the predecoder, but I'm choosing to ignore that for now.


Variable length instructions:

To handle variable length instructions in x86 and ARM, the predecoder now
takes in the current PC by reference to the getExtMachInst function. It can
modify the PC however it needs to (by setting NPC to be the PC + instruction
length, for instance). This could be improved since the CPU doesn't know if
the PC was modified and always has to write it back.


ISA parser:

To support the new API, all PC related operand types were removed from the
parser and replaced with a PCState type. There are two warts on this
implementation. First, as with all the other operand types, the PCState still
has to have a valid operand type even though it doesn't use it. Second, using
syntax like PCS.npc(target) doesn't work for two reasons, this looks like the
syntax for operand type overriding, and the parser can't figure out if you're
reading or writing. Instructions that use the PCS operand (which I've
consistently called it) need to first read it into a local variable,
manipulate it, and then write it back out.


Return address stack:

The return address stack needed a little extra help because, in the presence
of branch delay slots, it has to merge together elements of the return PC and
the call PC. To handle that, a buildRetPC utility function was added. There
are basically only two versions in all the ISAs, but it didn't seem short
enough to put into the generic ISA directory. Also, the branch predictor code
in O3 and InOrder were adjusted so that they always store the PC of the actual
call instruction in the RAS, not the next PC. If the call instruction is a
microop, the next PC refers to the next microop in the same macroop which is
probably not desirable. The buildRetPC function advances the PC intelligently
to the next macroop (in an ISA specific way) so that that case works.


Change in stats:

There were no change in stats except in MIPS and SPARC in the O3 model. MIPS
runs in about 9% fewer ticks. SPARC runs with 30%-50% fewer ticks, which could
likely be improved further by setting call/return instruction flags and taking
advantage of the RAS.


TODO:

Add != operators to the PCState classes, defined trivially to be !(a==b).
Smooth out places where PCs are split apart, passed around, and put back
together later. I think this might happen in SPARC's fault code. Add ISA
specific constructors that allow setting PC elements without calling a bunch
of accessors. Try to eliminate the need for the branching() function. Factor
out Alpha's PAL mode pc bit into a separate flag field, and eliminate places
where it's blindly masked out or tested in the PC.
diff 2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
/gem5/configs/example/
H A Dread_config.pydiff 14051:aff599136be8 Fri Jun 07 08:31:00 EDT 2019 Nikos Nikoleris <nikos.nikoleris@arm.com> configs: Fix read_config to work with new AddrRange serialization

Change-Id: I122c77c34c2f8c75f8b32682be858f651112ce89
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19151
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
/gem5/src/mem/
H A DCommMonitor.pydiff 10615:cd8aae15f89a Tue Dec 23 09:31:00 EST 2014 Kanishk Sugand <kanishk.sugand@arm.com> mem: Add stack distance statistics to the CommMonitor

This patch adds the stack distance calculator to the CommMonitor. The
stats are disabled by default.
H A DXBar.pydiff 12341:6eebba99d117 Tue May 31 08:43:00 EDT 2016 Nikos Nikoleris <nikos.nikoleris@arm.com> mem: Add the notion of point of unification in the coherent xbar

The point of unification is the first crossbar at which the
instruction cache, the data cache and the translation table walks of
the core are guaranteed to see the same copy of a memory location.

Change-Id: Ica79b34c8ed4f1a8f2379748e8520a8f8afffa90
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5040
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
H A Dserial_link.ccdiff 11284:b3926db25371 Thu Dec 31 09:32:00 EST 2015 Andreas Hansson <andreas.hansson@arm.com> mem: Make cache terminology easier to understand

This patch changes the name of a bunch of packet flags and MSHR member
functions and variables to make the coherency protocol easier to
understand. In addition the patch adds and updates lots of
descriptions, explicitly spelling out assumptions.

The following name changes are made:

* the packet memInhibit flag is renamed to cacheResponding

* the packet sharedAsserted flag is renamed to hasSharers

* the packet NeedsExclusive attribute is renamed to NeedsWritable

* the packet isSupplyExclusive is renamed responderHadWritable

* the MSHR pendingDirty is renamed to pendingModified

The cache states, Modified, Owned, Exclusive, Shared are also called
out in the cache and MSHR code to make it easier to understand.
H A Dcomm_monitor.ccdiff 13573:3223a8c1c3dd Wed Nov 14 11:31:00 EST 2018 Sascha Bischoff <sascha.bischoff@arm.com> mem: Add tryTiming suppport to CommMonitor

The CommMonitor did not support tryTiming, which resulted in gem5
panicing if the CommMonitor was used.

With this change, we update the CommMonitor pass through the
tryTiming() calls.

Change-Id: I86810170e5e10a0c5d63af76fc4a6ab70710d2fb
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15736
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
diff 11284:b3926db25371 Thu Dec 31 09:32:00 EST 2015 Andreas Hansson <andreas.hansson@arm.com> mem: Make cache terminology easier to understand

This patch changes the name of a bunch of packet flags and MSHR member
functions and variables to make the coherency protocol easier to
understand. In addition the patch adds and updates lots of
descriptions, explicitly spelling out assumptions.

The following name changes are made:

* the packet memInhibit flag is renamed to cacheResponding

* the packet sharedAsserted flag is renamed to hasSharers

* the packet NeedsExclusive attribute is renamed to NeedsWritable

* the packet isSupplyExclusive is renamed responderHadWritable

* the MSHR pendingDirty is renamed to pendingModified

The cache states, Modified, Owned, Exclusive, Shared are also called
out in the cache and MSHR code to make it easier to understand.
diff 10615:cd8aae15f89a Tue Dec 23 09:31:00 EST 2014 Kanishk Sugand <kanishk.sugand@arm.com> mem: Add stack distance statistics to the CommMonitor

This patch adds the stack distance calculator to the CommMonitor. The
stats are disabled by default.
diff 9814:7ad2b0186a32 Thu Jul 18 08:31:00 EDT 2013 Andreas Hansson <andreas.hansson@arm.com> mem: Set the cache line size on a system level

This patch removes the notion of a peer block size and instead sets
the cache line size on the system level.

Previously the size was set per cache, and communicated through the
interconnect. There were plenty checks to ensure that everyone had the
same size specified, and these checks are now removed. Another benefit
that is not yet harnessed is that the cache line size is now known at
construction time, rather than after the port binding. Hence, the
block size can be locally stored and does not have to be queried every
time it is used.

A follow-on patch updates the configuration scripts accordingly.
/gem5/src/mem/cache/
H A Dnoncoherent_cache.hhdiff 14035:60068a2d56e0 Fri May 31 20:01:00 EDT 2019 Daniel Carvalho <odanrc@yahoo.com.br> Revert "mem-cache: Remove writebacks packet list"

This reverts commit bf0a722acdd8247602e83720a5f81a0b69c76250.

Reason for revert: This patch introduces a bug:

The problem here is that the insertion of block A may cause the
eviction of block B, which on the lower level may cause the
eviction of block A. Since A is not marked as present yet, A is
"safely" removed from the snoop filter

However, by reverting it, using atomic and a Tags sub-class that
can generate multiple evictions at once becomes broken when using
Atomic mode and shall be fixed in a future patch.

Change-Id: I5b27e54b54ae5b50255588835c1a2ebf3015f002
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19088
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
H A Dwrite_queue_entry.ccdiff 12345:70c783a93195 Tue May 31 13:03:00 EDT 2016 Nikos Nikoleris <nikos.nikoleris@arm.com> mem: Add support for WriteClean packets in the memory system

This change adds support for creating and handling WriteClean
packets. The WriteClean operation is almost identical to a
WritebackDirty with the exception that the cache generating a
WriteClean retains a copy of the block.

Change-Id: I63c8de62919fad0f9547d412f8266aa4292ebecd
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5045
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
/gem5/src/mem/ruby/common/
H A DSet.hhdiff 8351:f897d0483b06 Tue Jun 14 20:51:00 EDT 2011 Nilay Vaish<nilay@cs.wisc.edu> Ruby: Correct set LONG_BITS and INDEX_SHIFT in class Set.
The code for Set class was written under the assumption that
std::numeric_limits<long>::digits returns the number of bits used for
data type long, which was presumed to be either 32 or 64. But return value
is actually one less, that is, it is either 31 or 63. The value is now
being incremented by 1 so as to correctly set it.
/gem5/src/sim/
H A Darguments.hhdiff 9034:8b9f227b64d8 Wed May 30 05:31:00 EDT 2012 Andreas Hansson <andreas.hansson@arm.com> gcc: Small fixes to compile with gcc 4.7

This patch makes two very minor changes to please gcc 4.7. The
CopyData function no longer exists and this has been replaced. For
some reason previous versions of gcc did not complain on the const
char casting not having an implementation, but this is now addressed.
H A Dprocess_impl.hhdiff 8737:770ccf3af571 Tue Jan 31 00:05:00 EST 2012 Koan-Sin Tan <koansin.tan@gmail.com> clang: Enable compiling gem5 using clang 2.9 and 3.0

This patch adds the necessary flags to the SConstruct and SConscript
files for compiling using clang 2.9 and later (on Ubuntu et al and OSX
XCode 4.2), and also cleans up a bunch of compiler warnings found by
clang. Most of the warnings are related to hidden virtual functions,
comparisons with unsigneds >= 0, and if-statements with empty
bodies. A number of mismatches between struct and class are also
fixed. clang 2.8 is not working as it has problems with class names
that occur in multiple namespaces (e.g. Statistics in
kernel_stats.hh).

clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which
causes confusion between the container std::set and the function
Packet::set, and this is currently addressed by not including the
entire namespace std, but rather selecting e.g. "using std::vector" in
the appropriate places.
/gem5/src/mem/ruby/profiler/
H A DAddressProfiler.ccdiff 7054:7d6862b80049 Wed Mar 31 19:56:00 EDT 2010 Nathan Binkert <nate@binkert.org> style: another ruby style pass
/gem5/src/mem/ruby/network/
H A DTopology.hhdiff 11715:31b2c4b52047 Mon Nov 21 15:41:00 EST 2016 Jieming Yin <jieming.yin@amd.com> ruby: Fix potential bugs in garnet2.0

1. Delete unused variable from struct LinkEntry
2. Correct GarnetExtLink and GarnetIntLink inheritance
/gem5/src/cpu/
H A Dthread_state.ccdiff 9814:7ad2b0186a32 Thu Jul 18 08:31:00 EDT 2013 Andreas Hansson <andreas.hansson@arm.com> mem: Set the cache line size on a system level

This patch removes the notion of a peer block size and instead sets
the cache line size on the system level.

Previously the size was set per cache, and communicated through the
interconnect. There were plenty checks to ensure that everyone had the
same size specified, and these checks are now removed. Another benefit
that is not yet harnessed is that the cache line size is now known at
construction time, rather than after the port binding. Hence, the
block size can be locally stored and does not have to be queried every
time it is used.

A follow-on patch updates the configuration scripts accordingly.
diff 8777:dd43f1c9fa0a Mon Oct 31 05:58:00 EDT 2011 Gabe Black <gblack@eecs.umich.edu> SE/FS: Make the functions available from the TC consistent between SE and FS.
diff 3476:0e26b5458236 Tue Oct 31 14:37:00 EST 2006 Kevin Lim <ktlim@umich.edu> Merge ktlim@zizzer:/bk/newmem
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

configs/example/fs.py:
configs/example/se.py:
src/mem/tport.hh:
Hand merge.
diff 3402:db60546818d0 Tue Oct 31 14:33:00 EST 2006 Kevin Lim <ktlim@umich.edu> Remove mem parameter. Now the translating port asks the CPU's dcache's peer for its MemObject instead of having to have a paramter for the MemObject.

configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
/gem5/src/base/stats/
H A Dtext.hhdiff 2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
H A Doutput.hhdiff 2665:a124942bacb8 Wed May 31 19:26:00 EDT 2006 Ali Saidi <saidi@eecs.umich.edu> Updated Authors from bk prs info
/gem5/src/dev/arm/
H A Dsmmu_v3_transl.ccdiff 14065:f925f90bda01 Mon Jun 24 11:31:00 EDT 2019 Giacomo Travaglini <giacomo.travaglini@arm.com> dev-arm: Remove un-needed Q_CONS_PROD_MASK macro

Change-Id: I858d7eea088bbdd2dc12123e21e59991c896597f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Michiel Van Tol <michiel.vantol@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19310
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
/gem5/src/arch/arm/insts/
H A Dmem64.hhdiff 14240:5b9499c2ae14 Fri Aug 30 09:31:00 EDT 2019 Giacomo Travaglini <giacomo.travaglini@arm.com> arch-arm: SySDC64 Instructions (CMO) using MiscRegIndex

Change-Id: Ia66d6abf965b1d33579e8fa048608d99c93ff2ce
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20621
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

Completed in 133 milliseconds

<<21222324252627282930>>