Searched hist:5 (Results 201 - 225 of 1055) sorted by relevance

1234567891011>>

/gem5/src/arch/riscv/
H A Dstacktrace.hh11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
11723:0596db108c53 Wed Nov 30 17:10:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> arch: [Patch 1/5] Added RISC-V base instruction set RV64I

First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.

Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).

[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
/gem5/src/dev/
H A Dbaddev.hh9235:5aa4896ed55a Wed Sep 19 06:15:00 EDT 2012 Andreas Hansson <andreas.hansson@arm.com> AddrRange: Transition from Range<T> to AddrRange

This patch takes the final plunge and transitions from the templated
Range class to the more specific AddrRange. In doing so it changes the
obvious Range<Addr> to AddrRange, and also bumps the range_map to be
AddrRangeMap.

In addition to the obvious changes, including the removal of redundant
includes, this patch also does some house keeping in preparing for the
introduction of address interleaving support in the ranges. The Range
class is also stripped of all the functionality that is never used.
/gem5/src/arch/mips/
H A Dmt_constants.hh5268:5bfc53fe60e7 Fri Nov 16 21:32:00 EST 2007 Korey Sewell <ksewell@umich.edu> go back and fix up MIPS copyright headers
H A Dsystem.hh5268:5bfc53fe60e7 Fri Nov 16 21:32:00 EST 2007 Korey Sewell <ksewell@umich.edu> go back and fix up MIPS copyright headers
H A Dvtophys.hh5268:5bfc53fe60e7 Fri Nov 16 21:32:00 EST 2007 Korey Sewell <ksewell@umich.edu> go back and fix up MIPS copyright headers
/gem5/src/arch/sparc/
H A Dmiscregs.hh6329:5d8b91875859 Thu Jul 09 02:02:00 EDT 2009 Gabe Black <gblack@eecs.umich.edu> Registers: Add a registers.hh file as an ISA switched header.
This file is for register indices, Num* constants, and register types.
copyRegs and copyMiscRegs were moved to utility.hh and utility.cc.
/gem5/src/arch/x86/bios/
H A DSConscript7799:5d0f62927d75 Mon Dec 20 16:24:00 EST 2010 Gabe Black <gblack@eecs.umich.edu> Style: Replace some tabs with spaces.
/gem5/src/arch/x86/isa/insts/
H A D__init__.py4529:5f32651bc10e Fri Jun 08 12:13:00 EDT 2007 Gabe Black <gblack@eecs.umich.edu> Move the microcode assembly to a python package instead of isa_parser files. Also, the code is now a single string which runs through the microcode assembler rather than docstrings associated with classes named after each architectural level instruction.
/gem5/src/arch/x86/isa/insts/general_purpose/compare_and_test/
H A Dbit_scan.py5415:5c28e3dbdc8e Thu Jun 12 00:46:00 EDT 2008 Gabe Black <gblack@eecs.umich.edu> X86: Fix the implementation of BSF.
/gem5/src/arch/x86/isa/insts/general_purpose/
H A Dlogical.py6082:5db340cc3c47 Sun Apr 19 07:56:00 EDT 2009 Gabe Black <gblack@eecs.umich.edu> X86: Implement a locking version of OR.
/gem5/src/arch/x86/isa/insts/simd128/integer/data_reordering/
H A Dunpack_and_interleave.py6528:5c3a713ec1bb Mon Aug 17 21:19:00 EDT 2009 Gabe Black <gblack@eecs.umich.edu> X86: Implement PUNPCKLDQ.
/gem5/src/arch/x86/isa/insts/simd64/integer/data_reordering/
H A Dunpack_and_interleave.py6528:5c3a713ec1bb Mon Aug 17 21:19:00 EDT 2009 Gabe Black <gblack@eecs.umich.edu> X86: Implement PUNPCKLDQ.
/gem5/src/arch/x86/isa/insts/system/
H A D__init__.py5291:5d38610cff05 Sun Dec 02 02:01:00 EST 2007 Gabe Black <gblack@eecs.umich.edu> X86: Implement the lgdt instruction.
/gem5/src/dev/mips/
H A DSConscript5481:5afd4f01c824 Tue Jun 17 23:39:00 EDT 2008 Nathan Binkert <nate@binkert.org> rename MipsConsole to MipsBackdoor
/gem5/tests/quick/se/70.tgen/
H A Dtgen-simple-mem.cfg10218:5a45f124a2f7 Fri May 09 18:58:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> tests: Reflect name change in DRAM tests

This patch reflects the recent name change in the DRAM TrafficGen
tests and also tidies up the test directory.
/gem5/src/dev/net/
H A Ddist_packet.hh11701:5e7599457b97 Wed Oct 26 22:48:00 EDT 2016 mlebeane <michael.lebeane@amd.com> dev: Add 'simLength' parameter in EthPacketData
Currently, all the network devices create a 16K buffer for the 'data' field
in EthPacketData, and use 'length' to keep track of the size of the packet
in the buffer. This patch introduces the 'simLength' parameter to
EthPacketData, which is used to hold the effective length of the packet used
for all timing calulations in the simulator. Serialization is performed using
only the useful data in the packet ('length') and not necessarily the entire
original buffer.
H A Detherpkt.hh11701:5e7599457b97 Wed Oct 26 22:48:00 EDT 2016 mlebeane <michael.lebeane@amd.com> dev: Add 'simLength' parameter in EthPacketData
Currently, all the network devices create a 16K buffer for the 'data' field
in EthPacketData, and use 'length' to keep track of the size of the packet
in the buffer. This patch introduces the 'simLength' parameter to
EthPacketData, which is used to hold the effective length of the packet used
for all timing calulations in the simulator. Serialization is performed using
only the useful data in the packet ('length') and not necessarily the entire
original buffer.
/gem5/ext/fputils/
H A Dfpbits.h10480:5d4ebc92d32e Thu Oct 16 05:49:00 EDT 2014 Andreas Sandberg <Andreas.Sandberg@ARM.com> ext: Update fputils to rev 6a47fd8358

This patch updates fputils to the latest revision (6a47fd8358) from
the upstream repository (github.com/andysan/fputils). Most notably,
this includes changes that export a limited set of 64-bit float
manipulation and avoids a warning about unused 64-bit floats in clang.
/gem5/tests/test-progs/insttest/src/riscv/
H A Drv64a.h11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V

This patch is the eighth patch in a series adding RISC-V to gem5, and
third of the bonus patches to the original series of five. It adds some
regression tests to RISC-V.

Regression tests included:
- se/00.hello
- se/02.insttest (split into several binaries which are not included due
to large size)

The tests added to 00.insttest will need to be build manually; to
facilitate this, a Makefile is included. The required toolchain and
compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools
GitHub repository at https://github.com/riscv/riscv-tools.

Note that because EBREAK only makes sense when gdb is running or while in
FS mode, it is not included in the linux-rv64i insttest. ERET is not
included because it does not make sense in SE mode and, in fact, causes
a panic by design.

Note also that not every system call is tested in linux-rv64i; of the ones
defined in linux/process.hh, some have been given numbers but not
definitions for the toolchain, or are merely stubs that always return 0. Of
the ones that do work properly, only a subset are tested due to similar
functionality.

Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Drv64d.cpp11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V

This patch is the eighth patch in a series adding RISC-V to gem5, and
third of the bonus patches to the original series of five. It adds some
regression tests to RISC-V.

Regression tests included:
- se/00.hello
- se/02.insttest (split into several binaries which are not included due
to large size)

The tests added to 00.insttest will need to be build manually; to
facilitate this, a Makefile is included. The required toolchain and
compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools
GitHub repository at https://github.com/riscv/riscv-tools.

Note that because EBREAK only makes sense when gdb is running or while in
FS mode, it is not included in the linux-rv64i insttest. ERET is not
included because it does not make sense in SE mode and, in fact, causes
a panic by design.

Note also that not every system call is tested in linux-rv64i; of the ones
defined in linux/process.hh, some have been given numbers but not
definitions for the toolchain, or are merely stubs that always return 0. Of
the ones that do work properly, only a subset are tested due to similar
functionality.

Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Drv64d.h11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V

This patch is the eighth patch in a series adding RISC-V to gem5, and
third of the bonus patches to the original series of five. It adds some
regression tests to RISC-V.

Regression tests included:
- se/00.hello
- se/02.insttest (split into several binaries which are not included due
to large size)

The tests added to 00.insttest will need to be build manually; to
facilitate this, a Makefile is included. The required toolchain and
compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools
GitHub repository at https://github.com/riscv/riscv-tools.

Note that because EBREAK only makes sense when gdb is running or while in
FS mode, it is not included in the linux-rv64i insttest. ERET is not
included because it does not make sense in SE mode and, in fact, causes
a panic by design.

Note also that not every system call is tested in linux-rv64i; of the ones
defined in linux/process.hh, some have been given numbers but not
definitions for the toolchain, or are merely stubs that always return 0. Of
the ones that do work properly, only a subset are tested due to similar
functionality.

Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Drv64f.cpp11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V

This patch is the eighth patch in a series adding RISC-V to gem5, and
third of the bonus patches to the original series of five. It adds some
regression tests to RISC-V.

Regression tests included:
- se/00.hello
- se/02.insttest (split into several binaries which are not included due
to large size)

The tests added to 00.insttest will need to be build manually; to
facilitate this, a Makefile is included. The required toolchain and
compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools
GitHub repository at https://github.com/riscv/riscv-tools.

Note that because EBREAK only makes sense when gdb is running or while in
FS mode, it is not included in the linux-rv64i insttest. ERET is not
included because it does not make sense in SE mode and, in fact, causes
a panic by design.

Note also that not every system call is tested in linux-rv64i; of the ones
defined in linux/process.hh, some have been given numbers but not
definitions for the toolchain, or are merely stubs that always return 0. Of
the ones that do work properly, only a subset are tested due to similar
functionality.

Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Drv64f.h11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V

This patch is the eighth patch in a series adding RISC-V to gem5, and
third of the bonus patches to the original series of five. It adds some
regression tests to RISC-V.

Regression tests included:
- se/00.hello
- se/02.insttest (split into several binaries which are not included due
to large size)

The tests added to 00.insttest will need to be build manually; to
facilitate this, a Makefile is included. The required toolchain and
compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools
GitHub repository at https://github.com/riscv/riscv-tools.

Note that because EBREAK only makes sense when gdb is running or while in
FS mode, it is not included in the linux-rv64i insttest. ERET is not
included because it does not make sense in SE mode and, in fact, causes
a panic by design.

Note also that not every system call is tested in linux-rv64i; of the ones
defined in linux/process.hh, some have been given numbers but not
definitions for the toolchain, or are merely stubs that always return 0. Of
the ones that do work properly, only a subset are tested due to similar
functionality.

Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Drv64i.h11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V

This patch is the eighth patch in a series adding RISC-V to gem5, and
third of the bonus patches to the original series of five. It adds some
regression tests to RISC-V.

Regression tests included:
- se/00.hello
- se/02.insttest (split into several binaries which are not included due
to large size)

The tests added to 00.insttest will need to be build manually; to
facilitate this, a Makefile is included. The required toolchain and
compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools
GitHub repository at https://github.com/riscv/riscv-tools.

Note that because EBREAK only makes sense when gdb is running or while in
FS mode, it is not included in the linux-rv64i insttest. ERET is not
included because it does not make sense in SE mode and, in fact, causes
a panic by design.

Note also that not every system call is tested in linux-rv64i; of the ones
defined in linux/process.hh, some have been given numbers but not
definitions for the toolchain, or are merely stubs that always return 0. Of
the ones that do work properly, only a subset are tested due to similar
functionality.

Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>
H A Drv64m.cpp11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V

This patch is the eighth patch in a series adding RISC-V to gem5, and
third of the bonus patches to the original series of five. It adds some
regression tests to RISC-V.

Regression tests included:
- se/00.hello
- se/02.insttest (split into several binaries which are not included due
to large size)

The tests added to 00.insttest will need to be build manually; to
facilitate this, a Makefile is included. The required toolchain and
compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools
GitHub repository at https://github.com/riscv/riscv-tools.

Note that because EBREAK only makes sense when gdb is running or while in
FS mode, it is not included in the linux-rv64i insttest. ERET is not
included because it does not make sense in SE mode and, in fact, causes
a panic by design.

Note also that not every system call is tested in linux-rv64i; of the ones
defined in linux/process.hh, some have been given numbers but not
definitions for the toolchain, or are merely stubs that always return 0. Of
the ones that do work properly, only a subset are tested due to similar
functionality.

Signed-off by: Alec Roelke

Signed-off by: Jason Lowe-Power <jason@lowepower.com>

Completed in 59 milliseconds

1234567891011>>