dev-arm: Fix GICv3 ITS cmdq wrapping

Change-Id: I979e8d1378d5b5d2647158798479cf4238f2c349
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20633
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Allow 32-bit access to GITS_TYPER

Change-Id: I9d19174b38ba70f82050102f955ccc162965d1fb
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20618
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix GITS_BASER initialization/access

The patch is fixing/improving GITS_BASER registers initialization.

* Not using reserved table types anymore (GITS_BASER.TYPE)
* Using write mask for handling WI bits

Change-Id: Ibe24667fdf22b42b86496167c19fc00bbb0ba191
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20328
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Start using GITS_CTLR.quiescent bit

The GITS_CTLR.quiescent bit is used by priviledged sw to check when the
ITS has finished draining its state (all pending translations/table
walks have ended) once it has been disabled (by setting the
GITS_CTLR.enable bit to 0).
This patch is modelling this behaviour by

* Changing the reset state to enable=0, quiescent=1
* Making the GITS_CTLR.quiescent bit RO
* Updating the bit once a new translation/command is being processed
(quiescent=0) and when there are no pending translation/commands
(quiescent=1)

Change-Id: I7cfe94b25d603400364b1cdfc2d2397acf5dfad8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20257
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Allow 32 bit accesses to GITS_C(WRITER/READR/BASER)

For those registers (GITS_CWRITER, GITS_READR and GITS_CBASER)
Bits [63:32] and bits [31:0] are accessible separately.

Change-Id: Ibf60b5e4fd20efb21a63570e6012862e37946877
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20256
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add GITS_PIDR2 register to the ITS memory map

The GITS Peripheral Identification Register #2 bits assignments are the
same as those for GICD_PIDR2.

Change-Id: I235008a383e08dd557d899cb3aa18202ef943f8b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20254
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Provide a GICv3 ITS Implementation

This patch introduces the GICv3 ITS module, which is in charge of
translating MSIs into physical (GICv3) and virtual (GICv4) LPIs. The
patch is only GICv3 compliant, which means that there is no direct
virtual LPI injection (this also means V* commands are unimplemented)
Other missing features are:

* No 2level ITS tables (only flat table supported)

* Command errors: when there is an error in the ITS, it is
IMPLEMENTATION DEFINED on how the ITS behaves. There are three possible
scenarios (see GICv3 TRM) and this implementation only supports one of
these (which is, aborting the command and jumping to the next one).
Furter patches could make it possible to select different reactions

* Invalidation commands (INV, INVALL) are only doing the memory table
walks, assuming the current Gicv3Redistributor is not caching any
configuration table entry.

Change-Id: If4ae9267ac1de7b20a04986a2af3ca3109743211
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18601
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>