misc: Using smart pointers for memory Requests

This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.

Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

arch,cpu: "virtualize" the TLB interface.

CPUs have historically instantiated the architecture specific version
of the TLBs to avoid a virtual function call, making them a little bit
more dependent on what the current ISA is. Some simple performance
measurement, the x86 twolf regression on the atomic CPU, shows that
there isn't actually any performance benefit, and if anything the
simulator goes slightly faster (although still within margin of error)
when the TLB functions are virtual.

This change switches everything outside of the architectures themselves
to use the generic BaseTLB type, and then inside the ISA for them to
cast that to their architecture specific type to call into architecture
specific interfaces.

The ARM TLB needed the most adjustment since it was using non-standard
translation function signatures. Specifically, they all took an extra
"type" parameter which defaulted to normal, and translateTiming
returned a Fault. translateTiming actually doesn't need to return a
Fault because everywhere that consumed it just stored it into a
structure which it then deleted(?), and the fault is stored in the
Translation object when the translation is done.

A little more work is needed to fully obviate the arch/tlb.hh header,
so the TheISA::TLB type is still visible outside of the ISAs.
Specifically, the TlbEntry type is used in the generic PageTable which
lives in src/mem.

Change-Id: I51b68ee74411f9af778317eff222f9349d2ed575
Reviewed-on: https://gem5-review.googlesource.com/6921
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

style: [patch 1/22] use /r/3648/ to reorganize includes

stats: Fixing regStats function for some SimObjects

Fixing an issue with regStats not calling the parent class method
for most SimObjects in Gem5. This causes issues if one adds new
stats in the base class (since they are never initialized properly!).

Change-Id: Iebc5aa66f58816ef4295dc8e48a357558d76a77c
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

Revert to 74c1e6513bd0 (sim: Thermal support for Linux)

power: Add power states to ClockedObject

Add 4 power states to the ClockedObject, provides necessary access functions
to check and update the power state. Default power state is UNDEFINED, it is
responsibility of the respective simulation model to provide the startup state
and any other logic for state change.

Add number of transition stat.
Add distribution of time spent in clock gated state.
Add power state residency stat.

Add dump call back function to allow stats update of distribution and residency
stats.

sim: Refactor the serialization base class

Objects that are can be serialized are supposed to inherit from the
Serializable class. This class is meant to provide a unified API for
such objects. However, so far it has mainly been used by SimObjects
due to some fundamental design limitations. This changeset redesigns
to the serialization interface to make it more generic and hide the
underlying checkpoint storage. Specifically:

* Add a set of APIs to serialize into a subsection of the current
object. Previously, objects that needed this functionality would
use ad-hoc solutions using nameOut() and section name
generation. In the new world, an object that implements the
interface has the methods serializeSection() and
unserializeSection() that serialize into a named /subsection/ of
the current object. Calling serialize() serializes an object into
the current section.

* Move the name() method from Serializable to SimObject as it is no
longer needed for serialization. The fully qualified section name
is generated by the main serialization code on the fly as objects
serialize sub-objects.

* Add a scoped ScopedCheckpointSection helper class. Some objects
need to serialize data structures, that are not deriving from
Serializable, into subsections. Previously, this was done using
nameOut() and manual section name generation. To simplify this,
this changeset introduces a ScopedCheckpointSection() helper
class. When this class is instantiated, it adds a new /subsection/
and subsequent serialization calls during the lifetime of this
helper class happen inside this section (or a subsection in case
of nested sections).

* The serialize() call is now const which prevents accidental state
manipulation during serialization. Objects that rely on modifying
state can use the serializeOld() call instead. The default
implementation simply calls serialize(). Note: The old-style calls
need to be explicitly called using the
serializeOld()/serializeSectionOld() style APIs. These are used by
default when serializing SimObjects.

* Both the input and output checkpoints now use their own named
types. This hides underlying checkpoint implementation from
objects that need checkpointing and makes it easier to change the
underlying checkpoint storage code.

mem, cpu: Add a separate flag for strictly ordered memory

The Request::UNCACHEABLE flag currently has two different
functions. The first, and obvious, function is to prevent the memory
system from caching data in the request. The second function is to
prevent reordering and speculation in CPU models.

This changeset gives the order/speculation requirement a separate flag
(Request::STRICT_ORDER). This flag prevents CPU models from doing the
following optimizations:

* Speculation: CPU models are not allowed to issue speculative
loads.

* Write combining: CPU models and caches are not allowed to merge
writes to the same cache line.

Note: The memory system may still reorder accesses unless the
UNCACHEABLE flag is set. It is therefore expected that the
STRICT_ORDER flag is combined with the UNCACHEABLE flag to prevent
this behavior.

mips: Remove unused private members to fix compile-time warning

Certain versions of clang complain about unused private members if
they are not used. This changeset removes such members from the
MIPS-specific classes to silence the warning.

style: eliminate equality tests with true and false

Using '== true' in a boolean expression is totally redundant,
and using '== false' is pretty verbose (and arguably less
readable in most cases) compared to '!'.

It's somewhat of a pet peeve, perhaps, but I had some time
waiting for some tests to run and decided to clean these up.

Unfortunately, SLICC appears not to have the '!' operator,
so I had to leave the '== false' tests in the SLICC code.

arch: Create a method to finalize physical addresses
in the TLB

Some architectures (currently only x86) require some fixing-up of
physical addresses after a normal address translation. This is usually
to remap devices such as the APIC, but could be used for other memory
mapped devices as well. When running the CPU in a using hardware
virtualization, we still need to do these address fix-ups before
inserting the request into the memory system. This patch moves this
patch allows that code to be used by such CPUs without doing full
address translations.

CheckerCPU: Add function stubs to non-ARM ISA source to compile with CheckerCPU

Making the CheckerCPU a runtime time option requires the code to be compatible
with ISAs other than ARM. This patch adds the appropriate function
stubs to allow compilation.

Implement Ali's review feedback.

Try to decrease indentation, and remove some redundant FullSystem checks.

Merge yet again with the main repository.

Merge with main repository.

SE/FS: Make getProcessPtr available in both modes, and get rid of FULL_SYSTEMs.

mips: Fix bugs in faults.cc/hh and tlb.cc for MIPS_FS

GCC: Get everything working with gcc 4.6.1.

And by "everything" I mean all the quick regressions.

MIPS: Use inheritance to consolidate class definitions.

MIPS: Consolidate TLB related faults.

Pass in a bool to indicate if the fault is from a store instead of having two
different classes. The classes were also misleadingly named since loads are
also processed by the DTB but should return ITB faults since they aren't
stores. The TLB may be returning the wrong fault in this case, but I haven't
looked at it closely.

MIPS: Consolidate the two AddressErrorFault variants.

MIPS: Get rid of cruft in the fault classes.

Get rid of Fault classes left over from when this file was copied from Alpha,
and rename ArithmeticOverflowFault to be IntegerOverflowFault and get rid of
the old IntegerOverflowFault stub. The Integer version is what's actually in
the manual, but the Arithmetic version had the implementation.

MIPS: Add constructors to the fault classes.

trace: reimplement the DTRACE function so it doesn't use a vector
At the same time, rename the trace flags to debug flags since they
have broader usage than simply tracing. This means that
--trace-flags is now --debug-flags and --trace-help is now --debug-help

includes: sort all includes

Mem: Reclaim some request flags used by MIPS for alignment checking.

These flags were being used to identify what alignment a request needed, but
the same information is available using the request size. This change also
eliminates the isMisaligned function. If more complicated alignment checks are
needed, they can be signaled using the ASI_BITS space in the flags vector like
is currently done with ARM.

style: fix sorting of includes and whitespace in some files

stats: only consider a formula initialized if there is a formula

MIPS: Format the register index constants like the other ISAs.
Also a few more style fixes.

MIPS: Get MIPS_FS to compile, more style fixes.
Some breakage was from my BitUnion change, some was much older.

MIPS: Many style fixes.
White space, commented out code, some other minor fixes.

Registers: Add a registers.hh file as an ISA switched header.
This file is for register indices, Num* constants, and register types.
copyRegs and copyMiscRegs were moved to utility.hh and utility.cc.

mips-tlb-fix: check for alignment faults.\nMIPS was never updated to use TLBS correcty in SE mode. The error was forwarding translations directly to pageTable. The TLB should check for alignment faults at bare minimum here but in the long run we should be using TLBs in SE mode for MIPS.

tlb: More fixing of unified TLB

tlb: Don't separate the TLB classes into an instruction TLB and a data TLB

CPU: Implement translateTiming which defers to translateAtomic, and convert the timing simple CPU to use it.

ISA: Replace the translate functions in the TLBs with translateAtomic.

mem: update stuff for changes to Packet and Request

style: Remove non-leading tabs everywhere they shouldn't be. Developers should configure their editors to not insert tabs

TLB: Make a TLB base class and put a virtual demapPage function in it.

go back and fix up MIPS copyright headers

fix MIPS headers

Get MIPS_SE actually working again by actually by fixing TLB stuff and running hello world

Add in files from merge-bare-iron, get them compiling in FS and SE mode

TLB: Fix serialization issues with the tlb entries and make the page table store the process, not the system.

params: Deprecate old-style constructors; update most SimObject constructors.

SimObjects not yet updated:
- Process and subclasses
- BaseCPU and subclasses

The SimObject(const std::string &name) constructor was removed. Subclasses
that still rely on that behavior must call the parent initializer as
: SimObject(makeParams(name))

Address translation: De-templatize the GenericTLB class.

MIPS: Fixes to get mips to compile.

Address Translation: Make SE mode use an actual TLB/MMU for translation like FS.