1[    0.000000] Initializing cgroup subsys cpu
2[    0.000000] Linux version 3.16.0-rc6 (tony@vamp) (gcc version 4.8.2 20140110 (prerelease) [ibm/gcc-4_8-branch merged from gcc-4_8-branch, revision 205847] (Ubuntu/Linaro 4.8.2-13ubuntu1) ) #1 SMP PREEMPT Wed Oct 1 14:39:23 EDT 2014
3[    0.000000] CPU: AArch64 Processor [410fc0f0] revision 0
4[    0.000000] No Cache Writeback Granule information, assuming cache line size 64
5[    0.000000] Memory limited to 256MB
6[    0.000000] cma: CMA: reserved 16 MiB at 8f000000
7[    0.000000] On node 0 totalpages: 65536
8[    0.000000]   DMA zone: 896 pages used for memmap
9[    0.000000]   DMA zone: 0 pages reserved
10[    0.000000]   DMA zone: 65536 pages, LIFO batch:15
11[    0.000000] PERCPU: Embedded 11 pages/cpu @ffffffc00efc5000 s12800 r8192 d24064 u45056
12[    0.000000] pcpu-alloc: s12800 r8192 d24064 u45056 alloc=11*4096
13[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
14[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64640
15[    0.000000] Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=256MB root=/dev/sda1
16[    0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
17[    0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
18[    0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
19[    0.000000] Memory: 223784K/262144K available (4569K kernel code, 308K rwdata, 1640K rodata, 208K init, 187K bss, 38360K reserved)
20[    0.000000] Virtual kernel memory layout:
21[    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000   (245759 MB)
22[    0.000000]     vmemmap : 0xffffffbc01c00000 - 0xffffffbc01f80000   (     3 MB)
23[    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
24[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc010000000   (   256 MB)
25[    0.000000]       .init : 0xffffffc000692000 - 0xffffffc0006c6200   (   209 kB)
26[    0.000000]       .text : 0xffffffc000080000 - 0xffffffc0006914e4   (  6214 kB)
27[    0.000000]       .data : 0xffffffc0006c7000 - 0xffffffc0007141e0   (   309 kB)
28[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
29[    0.000000] Preemptible hierarchical RCU implementation.
30[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
31[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
32[    0.000000] NR_IRQS:64 nr_irqs:64 0
33[    0.000000] Architected cp15 timer(s) running at 100.00MHz (phys).
34[    0.000000] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 2748779069440ns
35[    0.000013] Console: colour dummy device 80x25
36[    0.000014] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
37[    0.000015] pid_max: default: 32768 minimum: 301
38[    0.000022] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
39[    0.000023] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
40[    0.000066] hw perfevents: no hardware support available
41[    0.060015] CPU1: Booted secondary processor
42[    1.080050] CPU2: failed to come online
43[    2.100100] CPU3: failed to come online
44[    2.100101] Brought up 2 CPUs
45[    2.100102] SMP: Total of 2 processors activated.
46[    2.100134] devtmpfs: initialized
47[    2.100536] atomic64_test: passed
48[    2.100559] regulator-dummy: no parameters
49[    2.100800] NET: Registered protocol family 16
50[    2.100894] vdso: 2 pages (1 code, 1 data) at base ffffffc0006cd000
51[    2.100898] hw-breakpoint: found 2 breakpoint and 2 watchpoint registers.
52[    2.100937] software IO TLB [mem 0x8d400000-0x8d800000] (4MB) mapped at [ffffffc00d400000-ffffffc00d7fffff]
53[    2.100938] Serial: AMBA PL011 UART driver
54[    2.101059] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000
55[    2.101082] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
56[    2.101116] console [ttyAMA0] enabled
57[    2.101154] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000
58[    2.101168] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000
59[    2.101183] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000
60[    2.101195] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000
61[    2.140179] 3V3: 3300 mV 
62[    2.140202] vgaarb: loaded
63[    2.140232] SCSI subsystem initialized
64[    2.140246] libata version 3.00 loaded.
65[    2.140272] usbcore: registered new interface driver usbfs
66[    2.140279] usbcore: registered new interface driver hub
67[    2.140288] usbcore: registered new device driver usb
68[    2.140300] pps_core: LinuxPPS API ver. 1 registered
69[    2.140301] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
70[    2.140304] PTP clock support registered
71[    2.140381] Switched to clocksource arch_sys_counter
72[    2.141215] NET: Registered protocol family 2
73[    2.141272] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
74[    2.141277] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
75[    2.141282] TCP: Hash tables configured (established 2048 bind 2048)
76[    2.141285] TCP: reno registered
77[    2.141286] UDP hash table entries: 256 (order: 1, 8192 bytes)
78[    2.141288] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
79[    2.141303] NET: Registered protocol family 1
80[    2.141330] RPC: Registered named UNIX socket transport module.
81[    2.141331] RPC: Registered udp transport module.
82[    2.141331] RPC: Registered tcp transport module.
83[    2.141332] RPC: Registered tcp NFSv4.1 backchannel transport module.
84[    2.141334] PCI: CLS 0 bytes, default 64
85[    2.141433] futex hash table entries: 1024 (order: 4, 65536 bytes)
86[    2.141477] HugeTLB registered 2 MB page size, pre-allocated 0 pages
87[    2.143024] fuse init (API version 7.23)
88[    2.143091] msgmni has been set to 469
89[    2.143142] io scheduler noop registered
90[    2.143175] io scheduler cfq registered (default)
91[    2.143447] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00
92[    2.143448] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
93[    2.143450] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]
94[    2.143452] pci_bus 0000:00: root bus resource [bus 00-ff]
95[    2.143453] pci_bus 0000:00: scanning bus
96[    2.143455] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
97[    2.143457] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
98[    2.143460] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
99[    2.143476] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
100[    2.143477] pci 0000:00:01.0: reg 0x10: [io  0x0000-0x0007]
101[    2.143479] pci 0000:00:01.0: reg 0x14: [io  0x0000-0x0003]
102[    2.143481] pci 0000:00:01.0: reg 0x18: [io  0x0000-0x0007]
103[    2.143483] pci 0000:00:01.0: reg 0x1c: [io  0x0000-0x0003]
104[    2.143484] pci 0000:00:01.0: reg 0x20: [io  0x0000-0x000f]
105[    2.143486] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
106[    2.143503] pci_bus 0000:00: fixups for bus
107[    2.143505] pci_bus 0000:00: bus scan returning with max=00
108[    2.143506] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1cc
109[    2.143511] pci 0000:00:00.0: fixup irq: got 33
110[    2.143512] pci 0000:00:00.0: assigning IRQ 33
111[    2.143515] pci 0000:00:01.0: fixup irq: got 34
112[    2.143516] pci 0000:00:01.0: assigning IRQ 34
113[    2.143519] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
114[    2.143520] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
115[    2.143522] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
116[    2.143524] pci 0000:00:01.0: BAR 4: assigned [io  0x1000-0x100f]
117[    2.143525] pci 0000:00:01.0: BAR 0: assigned [io  0x1010-0x1017]
118[    2.143527] pci 0000:00:01.0: BAR 2: assigned [io  0x1018-0x101f]
119[    2.143529] pci 0000:00:01.0: BAR 1: assigned [io  0x1020-0x1023]
120[    2.143531] pci 0000:00:01.0: BAR 3: assigned [io  0x1024-0x1027]
121[    2.143891] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
122[    2.144060] ata_piix 0000:00:01.0: version 2.13
123[    2.144062] ata_piix 0000:00:01.0: enabling device (0000 -> 0001)
124[    2.144068] ata_piix 0000:00:01.0: enabling bus mastering
125[    2.144250] scsi0 : ata_piix
126[    2.144297] scsi1 : ata_piix
127[    2.144314] ata1: PATA max UDMA/33 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 34
128[    2.144315] ata2: PATA max UDMA/33 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 34
129[    2.144376] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
130[    2.144377] e1000: Copyright (c) 1999-2006 Intel Corporation.
131[    2.144381] e1000 0000:00:00.0: enabling device (0000 -> 0002)
132[    2.144382] e1000 0000:00:00.0: enabling bus mastering
133[    2.290387] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
134[    2.290388] ata1.00: 2096640 sectors, multi 0: LBA 
135[    2.290395] ata1.00: configured for UDMA/33
136[    2.290411] scsi 0:0:0:0: Direct-Access     ATA      M5 IDE Disk      n/a  PQ: 0 ANSI: 5
137[    2.290465] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB)
138[    2.290468] sd 0:0:0:0: Attached scsi generic sg0 type 0
139[    2.290484] sd 0:0:0:0: [sda] Write Protect is off
140[    2.290485] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
141[    2.290492] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
142[    2.290547]  sda: sda1
143[    2.290609] sd 0:0:0:0: [sda] Attached SCSI disk
144[    2.410644] e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01
145[    2.410646] e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection
146[    2.410652] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
147[    2.410653] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
148[    2.410661] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
149[    2.410662] igb: Copyright (c) 2007-2014 Intel Corporation.
150[    2.410706] usbcore: registered new interface driver usb-storage
151[    2.410735] mousedev: PS/2 mouse device common for all mice
152[    2.410834] usbcore: registered new interface driver usbhid
153[    2.410835] usbhid: USB HID core driver
154[    2.410850] TCP: cubic registered
155[    2.410852] NET: Registered protocol family 17
156[    2.411039] VFS: Mounted root (ext2 filesystem) on device 8:1.
157[    2.411050] devtmpfs: mounted
158[    2.411057] Freeing unused kernel memory: 208K (ffffffc000692000 - ffffffc0006c6000)
159
160INIT: version 2.88 booting
161
162Starting udev
163[    2.446370] udevd[609]: starting version 182
164Starting Bootlog daemon: bootlogd.
165
166[    2.521984] random: dd urandom read with 17 bits of entropy available
167Populating dev cache
168
169net.ipv4.conf.default.rp_filter = 1
170
171net.ipv4.conf.all.rp_filter = 1
172
173hwclock: can't open '/dev/misc/rtc': No such file or directory
174
175Mon Jan 27 08:00:00 UTC 2014
176
177hwclock: can't open '/dev/misc/rtc': No such file or directory
178
179
180INIT: Entering runlevel: 5
181
182
183Configuring network interfaces... udhcpc (v1.21.1) started
184
185[    2.620646] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
186Sending discover...
187
188Sending discover...
189
190Sending discover...
191
192No lease, forking to background
193
194done.
195
196Starting rpcbind daemon...rpcbind: cannot create socket for udp6
197
198
199rpcbind: cannot create socket for tcp6
200
201
202rpcbind: cannot get uid of '': Success
203
204
205done.
206
207creating NFS state directory: done
208
209starting statd: done
210
211Starting auto-serial-console: