RealView.py revision 8742
15081Sgblack@eecs.umich.edu# Copyright (c) 2009 ARM Limited 25081Sgblack@eecs.umich.edu# All rights reserved. 35081Sgblack@eecs.umich.edu# 47087Snate@binkert.org# The license below extends only to copyright in the software and shall 57087Snate@binkert.org# not be construed as granting a license to any other intellectual 67087Snate@binkert.org# property including but not limited to intellectual property relating 77087Snate@binkert.org# to a hardware implementation of the functionality of the software 87087Snate@binkert.org# licensed hereunder. You may use the software subject to the license 97087Snate@binkert.org# terms below provided that you ensure that this notice is replicated 107087Snate@binkert.org# unmodified and in its entirety in all distributions of the software, 117087Snate@binkert.org# modified or unmodified, in source code or in binary form. 125081Sgblack@eecs.umich.edu# 137087Snate@binkert.org# Copyright (c) 2006-2007 The Regents of The University of Michigan 147087Snate@binkert.org# All rights reserved. 157087Snate@binkert.org# 167087Snate@binkert.org# Redistribution and use in source and binary forms, with or without 177087Snate@binkert.org# modification, are permitted provided that the following conditions are 187087Snate@binkert.org# met: redistributions of source code must retain the above copyright 197087Snate@binkert.org# notice, this list of conditions and the following disclaimer; 207087Snate@binkert.org# redistributions in binary form must reproduce the above copyright 215081Sgblack@eecs.umich.edu# notice, this list of conditions and the following disclaimer in the 227087Snate@binkert.org# documentation and/or other materials provided with the distribution; 235081Sgblack@eecs.umich.edu# neither the name of the copyright holders nor the names of its 245081Sgblack@eecs.umich.edu# contributors may be used to endorse or promote products derived from 255081Sgblack@eecs.umich.edu# this software without specific prior written permission. 265081Sgblack@eecs.umich.edu# 275081Sgblack@eecs.umich.edu# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 285081Sgblack@eecs.umich.edu# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 295081Sgblack@eecs.umich.edu# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 305081Sgblack@eecs.umich.edu# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 315081Sgblack@eecs.umich.edu# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 325081Sgblack@eecs.umich.edu# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 335081Sgblack@eecs.umich.edu# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 345081Sgblack@eecs.umich.edu# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 355081Sgblack@eecs.umich.edu# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 365081Sgblack@eecs.umich.edu# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 375081Sgblack@eecs.umich.edu# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 385081Sgblack@eecs.umich.edu# 395084Sgblack@eecs.umich.edu# Authors: Ali Saidi 405084Sgblack@eecs.umich.edu# Gabe Black 415121Sgblack@eecs.umich.edu# William Wang 425084Sgblack@eecs.umich.edu 435084Sgblack@eecs.umich.edufrom m5.params import * 445084Sgblack@eecs.umich.edufrom m5.proxy import * 455084Sgblack@eecs.umich.edufrom Device import BasicPioDevice, PioDevice, IsaFake, BadAddr, DmaDevice 465084Sgblack@eecs.umich.edufrom Pci import PciConfigAll 475121Sgblack@eecs.umich.edufrom Ethernet import NSGigE, IGbE_e1000, IGbE_igb 485084Sgblack@eecs.umich.edufrom Ide import * 495084Sgblack@eecs.umich.edufrom Platform import Platform 509582Snilay@cs.wisc.edufrom Terminal import Terminal 519582Snilay@cs.wisc.edufrom Uart import Uart 529582Snilay@cs.wisc.edu 539582Snilay@cs.wisc.educlass AmbaDevice(BasicPioDevice): 546619Sgblack@eecs.umich.edu type = 'AmbaDevice' 556619Sgblack@eecs.umich.edu abstract = True 566619Sgblack@eecs.umich.edu amba_id = Param.UInt32("ID of AMBA device for kernel detection") 576619Sgblack@eecs.umich.edu 585084Sgblack@eecs.umich.educlass AmbaIntDevice(AmbaDevice): 595117Sgblack@eecs.umich.edu type = 'AmbaIntDevice' 605084Sgblack@eecs.umich.edu abstract = True 615084Sgblack@eecs.umich.edu gic = Param.Gic(Parent.any, "Gic to use for interrupting") 625084Sgblack@eecs.umich.edu int_num = Param.UInt32("Interrupt number that connects to GIC") 635084Sgblack@eecs.umich.edu int_delay = Param.Latency("100ns", 645117Sgblack@eecs.umich.edu "Time between action and interrupt generation by device") 655084Sgblack@eecs.umich.edu 665084Sgblack@eecs.umich.educlass AmbaDmaDevice(DmaDevice): 676619Sgblack@eecs.umich.edu type = 'AmbaDmaDevice' 686619Sgblack@eecs.umich.edu abstract = True 696619Sgblack@eecs.umich.edu pio_addr = Param.Addr("Address for AMBA slave interface") 706619Sgblack@eecs.umich.edu pio_latency = Param.Latency("10ns", "Time between action and write/read result by AMBA DMA Device") 715084Sgblack@eecs.umich.edu gic = Param.Gic(Parent.any, "Gic to use for interrupting") 729893Sandreas@sandberg.pp.se int_num = Param.UInt32("Interrupt number that connects to GIC") 735084Sgblack@eecs.umich.edu amba_id = Param.UInt32("ID of AMBA device for kernel detection") 749893Sandreas@sandberg.pp.se 755084Sgblack@eecs.umich.educlass A9SCU(BasicPioDevice): 765084Sgblack@eecs.umich.edu type = 'A9SCU' 775084Sgblack@eecs.umich.edu 789893Sandreas@sandberg.pp.seclass RealViewCtrl(BasicPioDevice): 795084Sgblack@eecs.umich.edu type = 'RealViewCtrl' 805084Sgblack@eecs.umich.edu proc_id0 = Param.UInt32(0x0C000000, "Processor ID, SYS_PROCID") 819893Sandreas@sandberg.pp.se proc_id1 = Param.UInt32(0x0C000222, "Processor ID, SYS_PROCID1") 825084Sgblack@eecs.umich.edu idreg = Param.UInt32(0x00000000, "ID Register, SYS_ID") 835081Sgblack@eecs.umich.edu 84class Gic(PioDevice): 85 type = 'Gic' 86 platform = Param.Platform(Parent.any, "Platform this device is part of.") 87 dist_addr = Param.Addr(0x1f001000, "Address for distributor") 88 cpu_addr = Param.Addr(0x1f000100, "Address for cpu") 89 dist_pio_delay = Param.Latency('10ns', "Delay for PIO r/w to distributor") 90 cpu_pio_delay = Param.Latency('10ns', "Delay for PIO r/w to cpu interface") 91 int_latency = Param.Latency('10ns', "Delay for interrupt to get to CPU") 92 it_lines = Param.UInt32(128, "Number of interrupt lines supported (max = 1020)") 93 94class AmbaFake(AmbaDevice): 95 type = 'AmbaFake' 96 ignore_access = Param.Bool(False, "Ignore reads/writes to this device, (e.g. IsaFake + AMBA)") 97 amba_id = 0; 98 99class Pl011(Uart): 100 type = 'Pl011' 101 gic = Param.Gic(Parent.any, "Gic to use for interrupting") 102 int_num = Param.UInt32("Interrupt number that connects to GIC") 103 end_on_eot = Param.Bool(False, "End the simulation when a EOT is received on the UART") 104 int_delay = Param.Latency("100ns", "Time between action and interrupt generation by UART") 105 106class Sp804(AmbaDevice): 107 type = 'Sp804' 108 gic = Param.Gic(Parent.any, "Gic to use for interrupting") 109 int_num0 = Param.UInt32("Interrupt number that connects to GIC") 110 clock0 = Param.Clock('1MHz', "Clock speed of the input") 111 int_num1 = Param.UInt32("Interrupt number that connects to GIC") 112 clock1 = Param.Clock('1MHz', "Clock speed of the input") 113 amba_id = 0x00141804 114 115class CpuLocalTimer(BasicPioDevice): 116 type = 'CpuLocalTimer' 117 gic = Param.Gic(Parent.any, "Gic to use for interrupting") 118 int_num_timer = Param.UInt32("Interrrupt number used per-cpu to GIC") 119 int_num_watchdog = Param.UInt32("Interrupt number for per-cpu watchdog to GIC") 120 clock = Param.Clock('1GHz', "Clock speed at which the timer counts") 121 122class Pl050(AmbaIntDevice): 123 type = 'Pl050' 124 vnc = Param.VncServer(Parent.any, "Vnc server for remote frame buffer display") 125 is_mouse = Param.Bool(False, "Is this interface a mouse, if not a keyboard") 126 int_delay = '1us' 127 amba_id = 0x00141050 128 129class Pl111(AmbaDmaDevice): 130 type = 'Pl111' 131 clock = Param.Clock('24MHz', "Clock speed of the input") 132 vnc = Param.VncServer(Parent.any, "Vnc server for remote frame buffer display") 133 amba_id = 0x00141111 134 135class RealView(Platform): 136 type = 'RealView' 137 system = Param.System(Parent.any, "system") 138 pci_cfg_base = Param.Addr(0, "Base address of PCI Configuraiton Space") 139 140# Reference for memory map and interrupt number 141# RealView Platform Baseboard Explore for Cortex-A9 User Guide(ARM DUI 0440A) 142# Chapter 4: Programmer's Reference 143class RealViewPBX(RealView): 144 uart = Pl011(pio_addr=0x10009000, int_num=44) 145 realview_io = RealViewCtrl(pio_addr=0x10000000) 146 gic = Gic() 147 timer0 = Sp804(int_num0=36, int_num1=36, pio_addr=0x10011000) 148 timer1 = Sp804(int_num0=37, int_num1=37, pio_addr=0x10012000) 149 local_cpu_timer = CpuLocalTimer(int_num_timer=29, int_num_watchdog=30, pio_addr=0x1f000600) 150 clcd = Pl111(pio_addr=0x10020000, int_num=55) 151 kmi0 = Pl050(pio_addr=0x10006000, int_num=52) 152 kmi1 = Pl050(pio_addr=0x10007000, int_num=53, is_mouse=True) 153 a9scu = A9SCU(pio_addr=0x1f000000) 154 cf_ctrl = IdeController(disks=[], pci_func=0, pci_dev=7, pci_bus=2, 155 io_shift = 1, ctrl_offset = 2, Command = 0x1, 156 BAR0 = 0x18000000, BAR0Size = '16B', 157 BAR1 = 0x18000100, BAR1Size = '1B', 158 BAR0LegacyIO = True, BAR1LegacyIO = True) 159 160 161 l2x0_fake = IsaFake(pio_addr=0x1f002000, pio_size=0xfff) 162 flash_fake = IsaFake(pio_addr=0x40000000, pio_size=0x20000000, 163 fake_mem=True) 164 dmac_fake = AmbaFake(pio_addr=0x10030000) 165 uart1_fake = AmbaFake(pio_addr=0x1000a000) 166 uart2_fake = AmbaFake(pio_addr=0x1000b000) 167 uart3_fake = AmbaFake(pio_addr=0x1000c000) 168 smc_fake = AmbaFake(pio_addr=0x100e1000) 169 sp810_fake = AmbaFake(pio_addr=0x10001000, ignore_access=True) 170 watchdog_fake = AmbaFake(pio_addr=0x10010000) 171 gpio0_fake = AmbaFake(pio_addr=0x10013000) 172 gpio1_fake = AmbaFake(pio_addr=0x10014000) 173 gpio2_fake = AmbaFake(pio_addr=0x10015000) 174 ssp_fake = AmbaFake(pio_addr=0x1000d000) 175 sci_fake = AmbaFake(pio_addr=0x1000e000) 176 aaci_fake = AmbaFake(pio_addr=0x10004000) 177 mmc_fake = AmbaFake(pio_addr=0x10005000) 178 rtc_fake = AmbaFake(pio_addr=0x10017000, amba_id=0x41031) 179 180 181 # Attach I/O devices that are on chip 182 def attachOnChipIO(self, bus): 183 self.gic.pio = bus.port 184 self.l2x0_fake.pio = bus.port 185 self.a9scu.pio = bus.port 186 self.local_cpu_timer.pio = bus.port 187 188 # Attach I/O devices to specified bus object. Can't do this 189 # earlier, since the bus object itself is typically defined at the 190 # System level. 191 def attachIO(self, bus): 192 self.uart.pio = bus.port 193 self.realview_io.pio = bus.port 194 self.timer0.pio = bus.port 195 self.timer1.pio = bus.port 196 self.clcd.pio = bus.port 197 self.kmi0.pio = bus.port 198 self.kmi1.pio = bus.port 199 self.cf_ctrl.pio = bus.port 200 self.dmac_fake.pio = bus.port 201 self.uart1_fake.pio = bus.port 202 self.uart2_fake.pio = bus.port 203 self.uart3_fake.pio = bus.port 204 self.smc_fake.pio = bus.port 205 self.sp810_fake.pio = bus.port 206 self.watchdog_fake.pio = bus.port 207 self.gpio0_fake.pio = bus.port 208 self.gpio1_fake.pio = bus.port 209 self.gpio2_fake.pio = bus.port 210 self.ssp_fake.pio = bus.port 211 self.sci_fake.pio = bus.port 212 self.aaci_fake.pio = bus.port 213 self.mmc_fake.pio = bus.port 214 self.rtc_fake.pio = bus.port 215 self.flash_fake.pio = bus.port 216 217# Reference for memory map and interrupt number 218# RealView Emulation Baseboard User Guide (ARM DUI 0143B) 219# Chapter 4: Programmer's Reference 220class RealViewEB(RealView): 221 uart = Pl011(pio_addr=0x10009000, int_num=44) 222 realview_io = RealViewCtrl(pio_addr=0x10000000) 223 gic = Gic(dist_addr=0x10041000, cpu_addr=0x10040000) 224 timer0 = Sp804(int_num0=36, int_num1=36, pio_addr=0x10011000) 225 timer1 = Sp804(int_num0=37, int_num1=37, pio_addr=0x10012000) 226 clcd = Pl111(pio_addr=0x10020000, int_num=23) 227 kmi0 = Pl050(pio_addr=0x10006000, int_num=20) 228 kmi1 = Pl050(pio_addr=0x10007000, int_num=21, is_mouse=True) 229 230 l2x0_fake = IsaFake(pio_addr=0x1f002000, pio_size=0xfff, warn_access="1") 231 flash_fake = IsaFake(pio_addr=0x40000000, pio_size=0x20000000-1, 232 fake_mem=True) 233 dmac_fake = AmbaFake(pio_addr=0x10030000) 234 uart1_fake = AmbaFake(pio_addr=0x1000a000) 235 uart2_fake = AmbaFake(pio_addr=0x1000b000) 236 uart3_fake = AmbaFake(pio_addr=0x1000c000) 237 smcreg_fake = IsaFake(pio_addr=0x10080000, pio_size=0x10000-1) 238 smc_fake = AmbaFake(pio_addr=0x100e1000) 239 sp810_fake = AmbaFake(pio_addr=0x10001000, ignore_access=True) 240 watchdog_fake = AmbaFake(pio_addr=0x10010000) 241 gpio0_fake = AmbaFake(pio_addr=0x10013000) 242 gpio1_fake = AmbaFake(pio_addr=0x10014000) 243 gpio2_fake = AmbaFake(pio_addr=0x10015000) 244 ssp_fake = AmbaFake(pio_addr=0x1000d000) 245 sci_fake = AmbaFake(pio_addr=0x1000e000) 246 aaci_fake = AmbaFake(pio_addr=0x10004000) 247 mmc_fake = AmbaFake(pio_addr=0x10005000) 248 rtc_fake = AmbaFake(pio_addr=0x10017000, amba_id=0x41031) 249 250 251 252 # Attach I/O devices that are on chip 253 def attachOnChipIO(self, bus): 254 self.gic.pio = bus.port 255 self.l2x0_fake.pio = bus.port 256 257 # Attach I/O devices to specified bus object. Can't do this 258 # earlier, since the bus object itself is typically defined at the 259 # System level. 260 def attachIO(self, bus): 261 self.uart.pio = bus.port 262 self.realview_io.pio = bus.port 263 self.timer0.pio = bus.port 264 self.timer1.pio = bus.port 265 self.clcd.pio = bus.port 266 self.kmi0.pio = bus.port 267 self.kmi1.pio = bus.port 268 self.dmac_fake.pio = bus.port 269 self.uart1_fake.pio = bus.port 270 self.uart2_fake.pio = bus.port 271 self.uart3_fake.pio = bus.port 272 self.smc_fake.pio = bus.port 273 self.sp810_fake.pio = bus.port 274 self.watchdog_fake.pio = bus.port 275 self.gpio0_fake.pio = bus.port 276 self.gpio1_fake.pio = bus.port 277 self.gpio2_fake.pio = bus.port 278 self.ssp_fake.pio = bus.port 279 self.sci_fake.pio = bus.port 280 self.aaci_fake.pio = bus.port 281 self.mmc_fake.pio = bus.port 282 self.rtc_fake.pio = bus.port 283 self.flash_fake.pio = bus.port 284 self.smcreg_fake.pio = bus.port 285 286class VExpress_ELT(RealView): 287 pci_cfg_base = 0xD0000000 288 elba_uart = Pl011(pio_addr=0xE0009000, int_num=42) 289 uart = Pl011(pio_addr=0xFF009000, int_num=121) 290 realview_io = RealViewCtrl(proc_id0=0x0C000222, pio_addr=0xFF000000) 291 gic = Gic(dist_addr=0xE0201000, cpu_addr=0xE0200100) 292 local_cpu_timer = CpuLocalTimer(int_num_timer=29, int_num_watchdog=30, pio_addr=0xE0200600) 293 v2m_timer0 = Sp804(int_num0=120, int_num1=120, pio_addr=0xFF011000) 294 v2m_timer1 = Sp804(int_num0=121, int_num1=121, pio_addr=0xFF012000) 295 elba_timer0 = Sp804(int_num0=36, int_num1=36, pio_addr=0xE0011000, clock0='50MHz', clock1='50MHz') 296 elba_timer1 = Sp804(int_num0=37, int_num1=37, pio_addr=0xE0012000, clock0='50MHz', clock1='50MHz') 297 clcd = Pl111(pio_addr=0xE0022000, int_num=46) # CLCD interrupt no. unknown 298 kmi0 = Pl050(pio_addr=0xFF006000, int_num=124) 299 kmi1 = Pl050(pio_addr=0xFF007000, int_num=125) 300 elba_kmi0 = Pl050(pio_addr=0xE0006000, int_num=52) 301 elba_kmi1 = Pl050(pio_addr=0xE0007000, int_num=53) 302 a9scu = A9SCU(pio_addr=0xE0200000) 303 cf_ctrl = IdeController(disks=[], pci_func=0, pci_dev=0, pci_bus=2, 304 io_shift = 2, ctrl_offset = 2, Command = 0x1, 305 BAR0 = 0xFF01A000, BAR0Size = '256B', 306 BAR1 = 0xFF01A100, BAR1Size = '4096B', 307 BAR0LegacyIO = True, BAR1LegacyIO = True) 308 309 pciconfig = PciConfigAll() 310 ethernet = IGbE_e1000(pci_bus=0, pci_dev=0, pci_func=0, 311 InterruptLine=1, InterruptPin=1) 312 313 ide = IdeController(disks = [], pci_bus=0, pci_dev=1, pci_func=0, 314 InterruptLine=2, InterruptPin=2) 315 316 l2x0_fake = IsaFake(pio_addr=0xE0202000, pio_size=0xfff) 317 dmac_fake = AmbaFake(pio_addr=0xE0020000) 318 uart1_fake = AmbaFake(pio_addr=0xE000A000) 319 uart2_fake = AmbaFake(pio_addr=0xE000B000) 320 uart3_fake = AmbaFake(pio_addr=0xE000C000) 321 smc_fake = AmbaFake(pio_addr=0xEC000000) 322 sp810_fake = AmbaFake(pio_addr=0xFF001000, ignore_access=True) 323 watchdog_fake = AmbaFake(pio_addr=0xE0010000) 324 aaci_fake = AmbaFake(pio_addr=0xFF004000) 325 elba_aaci_fake = AmbaFake(pio_addr=0xE0004000) 326 mmc_fake = AmbaFake(pio_addr=0xE0005000) # not sure if we need this 327 rtc_fake = AmbaFake(pio_addr=0xE0017000, amba_id=0x41031) 328 spsc_fake = IsaFake(pio_addr=0xE001B000, pio_size=0x2000) 329 lan_fake = IsaFake(pio_addr=0xFA000000, pio_size=0xffff) 330 usb_fake = IsaFake(pio_addr=0xFB000000, pio_size=0x1ffff) 331 332 333 # Attach I/O devices that are on chip 334 def attachOnChipIO(self, bus): 335 self.gic.pio = bus.port 336 self.a9scu.pio = bus.port 337 338 # Attach I/O devices to specified bus object. Can't do this 339 # earlier, since the bus object itself is typically defined at the 340 # System level. 341 def attachIO(self, bus): 342 self.elba_uart.pio = bus.port 343 self.uart.pio = bus.port 344 self.realview_io.pio = bus.port 345 self.local_cpu_timer.pio = bus.port 346 self.v2m_timer0.pio = bus.port 347 self.v2m_timer1.pio = bus.port 348 self.elba_timer0.pio = bus.port 349 self.elba_timer1.pio = bus.port 350 self.clcd.pio = bus.port 351 self.kmi0.pio = bus.port 352 self.kmi1.pio = bus.port 353 self.elba_kmi0.pio = bus.port 354 self.elba_kmi1.pio = bus.port 355 self.cf_ctrl.pio = bus.port 356 self.ide.pio = bus.port 357 self.ethernet.pio = bus.port 358 self.pciconfig.pio = bus.default 359 bus.use_default_range = True 360 361 self.l2x0_fake.pio = bus.port 362 self.dmac_fake.pio = bus.port 363 self.uart1_fake.pio = bus.port 364 self.uart2_fake.pio = bus.port 365 self.uart3_fake.pio = bus.port 366 self.smc_fake.pio = bus.port 367 self.sp810_fake.pio = bus.port 368 self.watchdog_fake.pio = bus.port 369 self.aaci_fake.pio = bus.port 370 self.elba_aaci_fake.pio = bus.port 371 self.mmc_fake.pio = bus.port 372 self.rtc_fake.pio = bus.port 373 self.spsc_fake.pio = bus.port 374 self.lan_fake.pio = bus.port 375 self.usb_fake.pio = bus.port 376 377