xref: /gem5/src/arch/x86/SConscript

# -*- mode:python -*-

# Copyright (c) 2005-2006 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Gabe Black

# Copyright (c) 2007-2008 The Hewlett-Packard Development Company
# All rights reserved.
#
# Redistribution and use of this software in source and binary forms,
# with or without modification, are permitted provided that the
# following conditions are met:
#
# The software must be used only for Non-Commercial Use which means any
# use which is NOT directed to receiving any direct monetary
# compensation for, or commercial advantage from such use.  Illustrative
# examples of non-commercial use are academic research, personal study,
# teaching, education and corporate research & development.
# Illustrative examples of commercial use are distributing products for
# commercial advantage and providing services using the software for
# commercial advantage.
#
# If you wish to use this software or functionality therein that may be
# covered by patents for commercial use, please contact:
#     Director of Intellectual Property Licensing
#     Office of Strategy and Technology
#     Hewlett-Packard Company
#     1501 Page Mill Road
#     Palo Alto, California  94304
#
# Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.  Redistributions
# in binary form must reproduce the above copyright notice, this list of
# conditions and the following disclaimer in the documentation and/or
# other materials provided with the distribution.  Neither the name of
# the COPYRIGHT HOLDER(s), HEWLETT-PACKARD COMPANY, nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.  No right of
# sublicense is granted herewith.  Derivatives of the software and
# output created using the software may be prepared, but only for
# Non-Commercial Uses.  Derivatives of the software may be shared with
# others provided: (i) the others agree to abide by the list of
# conditions herein which includes the Non-Commercial Use restrictions;
# and (ii) such Derivatives of the software include the above copyright
# notice to acknowledge the contribution from this software where
# applicable, this list of conditions and the disclaimer below.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Gabe Black

Import('*')

if env['TARGET_ISA'] == 'x86':
    Source('emulenv.cc')
    Source('floatregfile.cc')
    Source('faults.cc')
    Source('insts/microfpop.cc')
    Source('insts/microldstop.cc')
    Source('insts/microop.cc')
    Source('insts/microregop.cc')
    Source('insts/static_inst.cc')
    Source('intregfile.cc')
    Source('miscregfile.cc')
    Source('pagetable.cc')
    Source('predecoder.cc')
    Source('predecoder_tables.cc')
    Source('regfile.cc')
    Source('remote_gdb.cc')
    Source('tlb.cc')
    Source('utility.cc')

    SimObject('X86TLB.py')
    TraceFlag('Predecoder')
    TraceFlag('X86')

    if env['FULL_SYSTEM']:
        SimObject('X86System.py')

        # Full-system sources
        Source('linux/system.cc')
        Source('pagetable_walker.cc')
	Source('smbios.cc')
        Source('system.cc')
        Source('stacktrace.cc')
        Source('vtophys.cc')
    else:
        Source('process.cc')

        Source('linux/linux.cc')
        Source('linux/process.cc')
        Source('linux/syscalls.cc')

    python_files = (
        '__init__.py',
        'general_purpose/__init__.py',
        'general_purpose/arithmetic/__init__.py',
        'general_purpose/arithmetic/add_and_subtract.py',
        'general_purpose/arithmetic/increment_and_decrement.py',
        'general_purpose/arithmetic/multiply_and_divide.py',
        'general_purpose/cache_and_memory_management.py',
        'general_purpose/compare_and_test/__init__.py',
        'general_purpose/compare_and_test/bit_scan.py',
        'general_purpose/compare_and_test/bit_test.py',
        'general_purpose/compare_and_test/bounds.py',
        'general_purpose/compare_and_test/compare.py',
        'general_purpose/compare_and_test/set_byte_on_condition.py',
        'general_purpose/compare_and_test/test.py',
        'general_purpose/control_transfer/__init__.py',
        'general_purpose/control_transfer/call.py',
        'general_purpose/control_transfer/conditional_jump.py',
        'general_purpose/control_transfer/interrupts_and_exceptions.py',
        'general_purpose/control_transfer/jump.py',
        'general_purpose/control_transfer/loop.py',
        'general_purpose/control_transfer/xreturn.py',
        'general_purpose/data_conversion/__init__.py',
        'general_purpose/data_conversion/ascii_adjust.py',
        'general_purpose/data_conversion/bcd_adjust.py',
        'general_purpose/data_conversion/endian_conversion.py',
        'general_purpose/data_conversion/extract_sign_mask.py',
        'general_purpose/data_conversion/sign_extension.py',
        'general_purpose/data_conversion/translate.py',
        'general_purpose/data_transfer/__init__.py',
        'general_purpose/data_transfer/conditional_move.py',
        'general_purpose/data_transfer/move.py',
        'general_purpose/data_transfer/stack_operations.py',
        'general_purpose/data_transfer/xchg.py',
        'general_purpose/flags/__init__.py',
        'general_purpose/flags/load_and_store.py',
        'general_purpose/flags/push_and_pop.py',
        'general_purpose/flags/set_and_clear.py',
        'general_purpose/input_output/__init__.py',
        'general_purpose/input_output/general_io.py',
        'general_purpose/input_output/string_io.py',
        'general_purpose/load_effective_address.py',
        'general_purpose/load_segment_registers.py',
        'general_purpose/logical.py',
        'general_purpose/no_operation.py',
        'general_purpose/processor_information.py',
        'general_purpose/rotate_and_shift/__init__.py',
        'general_purpose/rotate_and_shift/rotate.py',
        'general_purpose/rotate_and_shift/shift.py',
        'general_purpose/semaphores.py',
        'general_purpose/string/__init__.py',
        'general_purpose/string/compare_strings.py',
        'general_purpose/string/load_string.py',
        'general_purpose/string/move_string.py',
        'general_purpose/string/scan_string.py',
        'general_purpose/string/store_string.py',
        'general_purpose/system_calls.py',
        'system/__init__.py',
        'system/halt.py',
        'system/invlpg.py',
        'system/undefined_operation.py',
        'system/msrs.py',
        'system/segmentation.py',
        'simd128/__init__.py',
        'simd128/integer/__init__.py',
        'simd128/integer/data_transfer/__init__.py',
        'simd128/integer/data_transfer/move.py',
        'simd128/integer/data_transfer/move_non_temporal.py',
        'simd128/integer/data_transfer/move_mask.py',
        'simd128/integer/data_conversion/__init__.py',
        'simd128/integer/data_conversion/convert_mmx_integer_to_floating_point.py',
        'simd128/integer/data_conversion/convert_integer_to_floating_point.py',
        'simd128/integer/data_conversion/convert_gpr_integer_to_floating_point.py',
        'simd128/integer/data_reordering/__init__.py',
        'simd128/integer/data_reordering/unpack_and_interleave.py',
        'simd128/integer/data_reordering/pack_with_saturation.py',
        'simd128/integer/data_reordering/extract_and_insert.py',
        'simd128/integer/data_reordering/shuffle.py',
        'simd128/integer/arithmetic/__init__.py',
        'simd128/integer/arithmetic/subtraction.py',
        'simd128/integer/arithmetic/addition.py',
        'simd128/integer/arithmetic/multiplication.py',
        'simd128/integer/arithmetic/multiply_add.py',
        'simd128/integer/arithmetic/average.py',
        'simd128/integer/arithmetic/sum_of_absolute_differences.py',
        'simd128/integer/shift/__init__.py',
        'simd128/integer/shift/right_arithmetic_shift.py',
        'simd128/integer/shift/left_logical_shift.py',
        'simd128/integer/shift/right_logical_shift.py',
        'simd128/integer/compare/__init__.py',
        'simd128/integer/compare/compare_and_write_mask.py',
        'simd128/integer/compare/compare_and_write_minimum_or_maximum.py',
        'simd128/integer/logical/__init__.py',
        'simd128/integer/logical/pand.py',
        'simd128/integer/logical/por.py',
        'simd128/integer/logical/exclusive_or.py',
        'simd128/integer/save_and_restore_state/__init__.py',
        'simd128/integer/save_and_restore_state/save_and_restore_state.py',
        'simd128/integer/save_and_restore_state/save_and_restore_control_and_status.py',
        'simd128/floating_point/__init__.py',
        'simd128/floating_point/data_transfer/__init__.py',
        'simd128/floating_point/data_transfer/move_mask.py',
        'simd128/floating_point/data_transfer/move.py',
        'simd128/floating_point/data_transfer/move_with_duplication.py',
        'simd128/floating_point/data_transfer/move_non_temporal.py',
        'simd128/floating_point/data_conversion/__init__.py',
        'simd128/floating_point/data_conversion/convert_floating_point_to_floating_point.py',
        'simd128/floating_point/data_conversion/convert_floating_point_to_xmm_integer.py',
        'simd128/floating_point/data_conversion/convert_floating_point_to_mmx_integer.py',
        'simd128/floating_point/data_conversion/convert_floating_point_to_gpr_integer.py',
        'simd128/floating_point/data_reordering/__init__.py',
        'simd128/floating_point/data_reordering/unpack_and_interleave.py',
        'simd128/floating_point/data_reordering/shuffle.py',
        'simd128/floating_point/arithmetic/__init__.py',
        'simd128/floating_point/arithmetic/subtraction.py',
        'simd128/floating_point/arithmetic/addition.py',
        'simd128/floating_point/arithmetic/horizontal_subtraction.py',
        'simd128/floating_point/arithmetic/horizontal_addition.py',
        'simd128/floating_point/arithmetic/square_root.py',
        'simd128/floating_point/arithmetic/simultaneous_addition_and_subtraction.py',
        'simd128/floating_point/arithmetic/multiplication.py',
        'simd128/floating_point/arithmetic/division.py',
        'simd128/floating_point/arithmetic/reciprocal_square_root.py',
        'simd128/floating_point/arithmetic/reciprocal_estimation.py',
        'simd128/floating_point/compare/__init__.py',
        'simd128/floating_point/compare/compare_and_write_mask.py',
        'simd128/floating_point/compare/compare_and_write_rflags.py',
        'simd128/floating_point/compare/compare_and_write_minimum_or_maximum.py',
        'simd128/floating_point/logical/__init__.py',
        'simd128/floating_point/logical/andp.py',
        'simd128/floating_point/logical/orp.py',
        'simd128/floating_point/logical/exclusive_or.py',
        'simd64/__init__.py',
        'simd64/integer/__init__.py',
        'simd64/integer/data_transfer/__init__.py',
        'simd64/integer/data_transfer/move_mask.py',
        'simd64/integer/data_transfer/move.py',
        'simd64/integer/data_transfer/move_non_temporal.py',
        'simd64/integer/exit_media_state.py',
        'simd64/integer/data_reordering/__init__.py',
        'simd64/integer/data_reordering/unpack_and_interleave.py',
        'simd64/integer/data_reordering/pack_with_saturation.py',
        'simd64/integer/data_reordering/extract_and_insert.py',
        'simd64/integer/data_reordering/shuffle_and_swap.py',
        'simd64/integer/data_conversion.py',
        'simd64/integer/arithmetic/__init__.py',
        'simd64/integer/arithmetic/subtraction.py',
        'simd64/integer/arithmetic/addition.py',
        'simd64/integer/arithmetic/multiplication.py',
        'simd64/integer/arithmetic/multiply_add.py',
        'simd64/integer/arithmetic/average.py',
        'simd64/integer/arithmetic/sum_of_absolute_differences.py',
        'simd64/integer/shift/__init__.py',
        'simd64/integer/shift/right_arithmetic_shift.py',
        'simd64/integer/shift/left_logical_shift.py',
        'simd64/integer/shift/right_logical_shift.py',
        'simd64/integer/compare/__init__.py',
        'simd64/integer/compare/compare_and_write_mask.py',
        'simd64/integer/compare/compare_and_write_minimum_or_maximum.py',
        'simd64/integer/logical/__init__.py',
        'simd64/integer/logical/pand.py',
        'simd64/integer/logical/por.py',
        'simd64/integer/logical/exclusive_or.py',
        'simd64/integer/save_and_restore_state.py',
        'simd64/floating_point/__init__.py',
        'simd64/floating_point/arithmetic/__init__.py',
        'simd64/floating_point/arithmetic/subtraction.py',
        'simd64/floating_point/arithmetic/addition.py',
        'simd64/floating_point/arithmetic/reciprocal_estimation.py',
        'simd64/floating_point/arithmetic/multiplication.py',
        'simd64/floating_point/arithmetic/accumulation.py',
        'simd64/floating_point/arithmetic/reciprocal_square_root.py',
        'simd64/floating_point/data_conversion.py',
        'simd64/floating_point/compare/__init__.py',
        'simd64/floating_point/compare/compare_and_write_mask.py',
        'simd64/floating_point/compare/compare_and_write_minimum_or_maximum.py',
        'x87/__init__.py',
        'x87/data_transfer_and_conversion/__init__.py',
        'x87/data_transfer_and_conversion/convert_and_load_or_store_integer.py',
        'x87/data_transfer_and_conversion/load_or_store_floating_point.py',
        'x87/data_transfer_and_conversion/exchange.py',
        'x87/data_transfer_and_conversion/convert_and_load_or_store_bcd.py',
        'x87/data_transfer_and_conversion/conditional_move.py',
        'x87/data_transfer_and_conversion/extract.py',
        'x87/load_constants/__init__.py',
        'x87/load_constants/load_0_1_or_pi.py',
        'x87/load_constants/load_logarithm.py',
        'x87/arithmetic/__init__.py',
        'x87/arithmetic/subtraction.py',
        'x87/arithmetic/addition.py',
        'x87/arithmetic/partial_remainder.py',
        'x87/arithmetic/multiplication.py',
        'x87/arithmetic/division.py',
        'x87/arithmetic/change_sign.py',
        'x87/arithmetic/round.py',
        'x87/arithmetic/square_root.py',
        'x87/transcendental_functions/__init__.py',
        'x87/transcendental_functions/trigonometric_functions.py',
        'x87/transcendental_functions/logarithmic_functions.py',
        'x87/compare_and_test/__init__.py',
        'x87/compare_and_test/classify.py',
        'x87/compare_and_test/test.py',
        'x87/compare_and_test/floating_point_ordered_compare.py',
        'x87/compare_and_test/floating_point_unordered_compare.py',
        'x87/compare_and_test/integer_compare.py',
        'x87/stack_management/__init__.py',
        'x87/stack_management/stack_control.py',
        'x87/stack_management/clear_state.py',
        'x87/control/__init__.py',
        'x87/control/clear_exceptions.py',
        'x87/control/initialize.py',
        'x87/control/wait_for_exceptions.py',
        'x87/control/save_x87_status_word.py',
        'x87/control/save_and_restore_x87_control_word.py',
        'x87/control/save_and_restore_x87_environment.py',
        'x87/no_operation.py'
        )


    # Add in files generated by the ISA description.
    isa_desc_files = env.ISADesc('isa/main.isa')
    for f in isa_desc_files:
        # Add in python file dependencies that won't be caught otherwise
        for pyfile in python_files:
            env.Depends(f, "isa/insts/%s" % pyfile)
        # Only non-header files need to be compiled.
        if not f.path.endswith('.hh'):
            Source(f)