FSConfig.py revision 8898:f777750a00e2 
1# Copyright (c) 2010-2012 ARM Limited
2# All rights reserved.
3#
4# The license below extends only to copyright in the software and shall
5# not be construed as granting a license to any other intellectual
6# property including but not limited to intellectual property relating
7# to a hardware implementation of the functionality of the software
8# licensed hereunder.  You may use the software subject to the license
9# terms below provided that you ensure that this notice is replicated
10# unmodified and in its entirety in all distributions of the software,
11# modified or unmodified, in source code or in binary form.
12#
13# Copyright (c) 2010-2011 Advanced Micro Devices, Inc.
14# Copyright (c) 2006-2008 The Regents of The University of Michigan
15# All rights reserved.
16#
17# Redistribution and use in source and binary forms, with or without
18# modification, are permitted provided that the following conditions are
19# met: redistributions of source code must retain the above copyright
20# notice, this list of conditions and the following disclaimer;
21# redistributions in binary form must reproduce the above copyright
22# notice, this list of conditions and the following disclaimer in the
23# documentation and/or other materials provided with the distribution;
24# neither the name of the copyright holders nor the names of its
25# contributors may be used to endorse or promote products derived from
26# this software without specific prior written permission.
27#
28# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39#
40# Authors: Kevin Lim
41
42from m5.objects import *
43from Benchmarks import *
44from m5.util import convert
45
46class CowIdeDisk(IdeDisk):
47    image = CowDiskImage(child=RawDiskImage(read_only=True),
48                         read_only=False)
49
50    def childImage(self, ci):
51        self.image.child.image_file = ci
52
53class MemBus(Bus):
54    badaddr_responder = BadAddr()
55    default = Self.badaddr_responder.pio
56
57
58def makeLinuxAlphaSystem(mem_mode, mdesc = None):
59    IO_address_space_base = 0x80000000000
60    class BaseTsunami(Tsunami):
61        ethernet = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
62        ide = IdeController(disks=[Parent.disk0, Parent.disk2],
63                            pci_func=0, pci_dev=0, pci_bus=0)
64
65    self = LinuxAlphaSystem()
66    if not mdesc:
67        # generic system
68        mdesc = SysConfig()
69    self.readfile = mdesc.script()
70    self.iobus = Bus(bus_id=0)
71    self.membus = MemBus(bus_id=1)
72    # By default the bridge responds to all addresses above the I/O
73    # base address (including the PCI config space)
74    self.bridge = Bridge(delay='50ns', nack_delay='4ns',
75                         ranges = [AddrRange(IO_address_space_base, Addr.max)])
76    self.physmem = PhysicalMemory(range = AddrRange(mdesc.mem()))
77    self.bridge.master = self.iobus.slave
78    self.bridge.slave = self.membus.master
79    self.physmem.port = self.membus.master
80    self.disk0 = CowIdeDisk(driveID='master')
81    self.disk2 = CowIdeDisk(driveID='master')
82    self.disk0.childImage(mdesc.disk())
83    self.disk2.childImage(disk('linux-bigswap2.img'))
84    self.tsunami = BaseTsunami()
85    self.tsunami.attachIO(self.iobus)
86    self.tsunami.ide.pio = self.iobus.master
87    self.tsunami.ide.config = self.iobus.master
88    self.tsunami.ide.dma = self.iobus.slave
89    self.tsunami.ethernet.pio = self.iobus.master
90    self.tsunami.ethernet.config = self.iobus.master
91    self.tsunami.ethernet.dma = self.iobus.slave
92    self.simple_disk = SimpleDisk(disk=RawDiskImage(image_file = mdesc.disk(),
93                                               read_only = True))
94    self.intrctrl = IntrControl()
95    self.mem_mode = mem_mode
96    self.terminal = Terminal()
97    self.kernel = binary('vmlinux')
98    self.pal = binary('ts_osfpal')
99    self.console = binary('console')
100    self.boot_osflags = 'root=/dev/hda1 console=ttyS0'
101
102    self.system_port = self.membus.slave
103
104    return self
105
106def makeLinuxAlphaRubySystem(mem_mode, mdesc = None):
107    class BaseTsunami(Tsunami):
108        ethernet = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
109        ide = IdeController(disks=[Parent.disk0, Parent.disk2],
110                            pci_func=0, pci_dev=0, pci_bus=0)
111
112    physmem = PhysicalMemory(range = AddrRange(mdesc.mem()))
113    self = LinuxAlphaSystem(physmem = physmem)
114    if not mdesc:
115        # generic system
116        mdesc = SysConfig()
117    self.readfile = mdesc.script()
118
119    # Create pio bus to connect all device pio ports to rubymem's pio port
120    self.piobus = Bus(bus_id=0)
121
122    #
123    # Pio functional accesses from devices need direct access to memory
124    # RubyPort currently does support functional accesses.  Therefore provide
125    # the piobus a direct connection to physical memory
126    #
127    self.piobus.master = physmem.port
128
129    self.disk0 = CowIdeDisk(driveID='master')
130    self.disk2 = CowIdeDisk(driveID='master')
131    self.disk0.childImage(mdesc.disk())
132    self.disk2.childImage(disk('linux-bigswap2.img'))
133    self.tsunami = BaseTsunami()
134    self.tsunami.attachIO(self.piobus)
135    self.tsunami.ide.pio = self.piobus.master
136    self.tsunami.ide.config = self.piobus.master
137    self.tsunami.ide.dma = self.piobus.slave
138    self.tsunami.ethernet.pio = self.piobus.master
139    self.tsunami.ethernet.config = self.piobus.master
140    self.tsunami.ethernet.dma = self.piobus.slave
141
142    #
143    # Store the dma devices for later connection to dma ruby ports.
144    # Append an underscore to dma_devices to avoid the SimObjectVector check.
145    #
146    self._dma_devices = [self.tsunami.ide, self.tsunami.ethernet]
147
148    self.simple_disk = SimpleDisk(disk=RawDiskImage(image_file = mdesc.disk(),
149                                               read_only = True))
150    self.intrctrl = IntrControl()
151    self.mem_mode = mem_mode
152    self.terminal = Terminal()
153    self.kernel = binary('vmlinux')
154    self.pal = binary('ts_osfpal')
155    self.console = binary('console')
156    self.boot_osflags = 'root=/dev/hda1 console=ttyS0'
157
158    return self
159
160def makeSparcSystem(mem_mode, mdesc = None):
161    # Constants from iob.cc and uart8250.cc
162    iob_man_addr = 0x9800000000
163    uart_pio_size = 8
164
165    class CowMmDisk(MmDisk):
166        image = CowDiskImage(child=RawDiskImage(read_only=True),
167                             read_only=False)
168
169        def childImage(self, ci):
170            self.image.child.image_file = ci
171
172    self = SparcSystem()
173    if not mdesc:
174        # generic system
175        mdesc = SysConfig()
176    self.readfile = mdesc.script()
177    self.iobus = Bus(bus_id=0)
178    self.membus = MemBus(bus_id=1)
179    self.bridge = Bridge(delay='50ns', nack_delay='4ns')
180    self.t1000 = T1000()
181    self.t1000.attachOnChipIO(self.membus)
182    self.t1000.attachIO(self.iobus)
183    self.physmem = PhysicalMemory(range = AddrRange(Addr('1MB'), size = '64MB'), zero = True)
184    self.physmem2 = PhysicalMemory(range = AddrRange(Addr('2GB'), size ='256MB'), zero = True)
185    self.bridge.master = self.iobus.slave
186    self.bridge.slave = self.membus.master
187    self.physmem.port = self.membus.master
188    self.physmem2.port = self.membus.master
189    self.rom.port = self.membus.master
190    self.nvram.port = self.membus.master
191    self.hypervisor_desc.port = self.membus.master
192    self.partition_desc.port = self.membus.master
193    self.intrctrl = IntrControl()
194    self.disk0 = CowMmDisk()
195    self.disk0.childImage(disk('disk.s10hw2'))
196    self.disk0.pio = self.iobus.master
197
198    # The puart0 and hvuart are placed on the IO bus, so create ranges
199    # for them. The remaining IO range is rather fragmented, so poke
200    # holes for the iob and partition descriptors etc.
201    self.bridge.ranges = \
202        [
203        AddrRange(self.t1000.puart0.pio_addr,
204                  self.t1000.puart0.pio_addr + uart_pio_size - 1),
205        AddrRange(self.disk0.pio_addr,
206                  self.t1000.fake_jbi.pio_addr +
207                  self.t1000.fake_jbi.pio_size - 1),
208        AddrRange(self.t1000.fake_clk.pio_addr,
209                  iob_man_addr - 1),
210        AddrRange(self.t1000.fake_l2_1.pio_addr,
211                  self.t1000.fake_ssi.pio_addr +
212                  self.t1000.fake_ssi.pio_size - 1),
213        AddrRange(self.t1000.hvuart.pio_addr,
214                  self.t1000.hvuart.pio_addr + uart_pio_size - 1)
215        ]
216    self.reset_bin = binary('reset_new.bin')
217    self.hypervisor_bin = binary('q_new.bin')
218    self.openboot_bin = binary('openboot_new.bin')
219    self.nvram_bin = binary('nvram1')
220    self.hypervisor_desc_bin = binary('1up-hv.bin')
221    self.partition_desc_bin = binary('1up-md.bin')
222
223    self.system_port = self.membus.slave
224
225    return self
226
227def makeArmSystem(mem_mode, machine_type, mdesc = None, bare_metal=False):
228    assert machine_type
229
230    if bare_metal:
231        self = ArmSystem()
232    else:
233        self = LinuxArmSystem()
234
235    if not mdesc:
236        # generic system
237        mdesc = SysConfig()
238
239    self.readfile = mdesc.script()
240    self.iobus = Bus(bus_id=0)
241    self.membus = MemBus(bus_id=1)
242    self.membus.badaddr_responder.warn_access = "warn"
243    self.bridge = Bridge(delay='50ns', nack_delay='4ns')
244    self.bridge.master = self.iobus.slave
245    self.bridge.slave = self.membus.master
246
247    self.mem_mode = mem_mode
248
249    if machine_type == "RealView_PBX":
250        self.realview = RealViewPBX()
251    elif machine_type == "RealView_EB":
252        self.realview = RealViewEB()
253    elif machine_type == "VExpress_ELT":
254        self.realview = VExpress_ELT()
255    elif machine_type == "VExpress_EMM":
256        self.realview = VExpress_EMM()
257        self.load_addr_mask = 0xffffffff
258    else:
259        print "Unknown Machine Type"
260        sys.exit(1)
261
262    self.cf0 = CowIdeDisk(driveID='master')
263    self.cf0.childImage(mdesc.disk())
264    # default to an IDE controller rather than a CF one
265    # assuming we've got one
266    try:
267        self.realview.ide.disks = [self.cf0]
268    except:
269        self.realview.cf_ctrl.disks = [self.cf0]
270
271    if bare_metal:
272        # EOT character on UART will end the simulation
273        self.realview.uart.end_on_eot = True
274        self.physmem = PhysicalMemory(range = AddrRange(Addr(mdesc.mem())),
275                                      zero = True)
276    else:
277        self.kernel = binary('vmlinux.arm.smp.fb.2.6.38.8')
278        self.machine_type = machine_type
279        if convert.toMemorySize(mdesc.mem()) > int(self.realview.max_mem_size):
280            print "The currently selected ARM platforms doesn't support"
281            print " the amount of DRAM you've selected. Please try"
282            print " another platform"
283            sys.exit(1)
284
285        boot_flags = 'earlyprintk console=ttyAMA0 lpj=19988480 norandmaps ' + \
286                     'rw loglevel=8 mem=%s root=/dev/sda1' % mdesc.mem()
287
288        self.physmem = PhysicalMemory(range = AddrRange(self.realview.mem_start_addr,
289                                                        size = mdesc.mem()))
290        self.realview.setupBootLoader(self.membus, self, binary)
291        self.gic_cpu_addr = self.realview.gic.cpu_addr
292        self.flags_addr = self.realview.realview_io.pio_addr + 0x30
293
294        if mdesc.disk().lower().count('android'):
295            boot_flags += " init=/init "
296        self.boot_osflags = boot_flags
297
298    self.physmem.port = self.membus.master
299    self.realview.attachOnChipIO(self.membus, self.bridge)
300    self.realview.attachIO(self.iobus)
301    self.intrctrl = IntrControl()
302    self.terminal = Terminal()
303    self.vncserver = VncServer()
304
305    self.system_port = self.membus.slave
306
307    return self
308
309
310def makeLinuxMipsSystem(mem_mode, mdesc = None):
311    class BaseMalta(Malta):
312        ethernet = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
313        ide = IdeController(disks=[Parent.disk0, Parent.disk2],
314                            pci_func=0, pci_dev=0, pci_bus=0)
315
316    self = LinuxMipsSystem()
317    if not mdesc:
318        # generic system
319        mdesc = SysConfig()
320    self.readfile = mdesc.script()
321    self.iobus = Bus(bus_id=0)
322    self.membus = MemBus(bus_id=1)
323    self.bridge = Bridge(delay='50ns', nack_delay='4ns')
324    self.physmem = PhysicalMemory(range = AddrRange('1GB'))
325    self.bridge.master = self.iobus.slave
326    self.bridge.slave = self.membus.master
327    self.physmem.port = self.membus.master
328    self.disk0 = CowIdeDisk(driveID='master')
329    self.disk2 = CowIdeDisk(driveID='master')
330    self.disk0.childImage(mdesc.disk())
331    self.disk2.childImage(disk('linux-bigswap2.img'))
332    self.malta = BaseMalta()
333    self.malta.attachIO(self.iobus)
334    self.malta.ide.pio = self.iobus.master
335    self.malta.ide.config = self.iobus.master
336    self.malta.ide.dma = self.iobus.slave
337    self.malta.ethernet.pio = self.iobus.master
338    self.malta.ethernet.config = self.iobus.master
339    self.malta.ethernet.dma = self.iobus.slave
340    self.simple_disk = SimpleDisk(disk=RawDiskImage(image_file = mdesc.disk(),
341                                               read_only = True))
342    self.intrctrl = IntrControl()
343    self.mem_mode = mem_mode
344    self.terminal = Terminal()
345    self.kernel = binary('mips/vmlinux')
346    self.console = binary('mips/console')
347    self.boot_osflags = 'root=/dev/hda1 console=ttyS0'
348
349    self.system_port = self.membus.slave
350
351    return self
352
353def x86IOAddress(port):
354    IO_address_space_base = 0x8000000000000000
355    return IO_address_space_base + port
356
357def connectX86ClassicSystem(x86_sys, numCPUs):
358    # Constants similar to x86_traits.hh
359    IO_address_space_base = 0x8000000000000000
360    pci_config_address_space_base = 0xc000000000000000
361    interrupts_address_space_base = 0xa000000000000000
362    APIC_range_size = 1 << 12;
363
364    x86_sys.membus = MemBus(bus_id=1)
365    x86_sys.physmem.port = x86_sys.membus.master
366
367    # North Bridge
368    x86_sys.iobus = Bus(bus_id=0)
369    x86_sys.bridge = Bridge(delay='50ns', nack_delay='4ns')
370    x86_sys.bridge.master = x86_sys.iobus.slave
371    x86_sys.bridge.slave = x86_sys.membus.master
372    # Allow the bridge to pass through the IO APIC (two pages),
373    # everything in the IO address range up to the local APIC, and
374    # then the entire PCI address space and beyond
375    x86_sys.bridge.ranges = \
376        [
377        AddrRange(x86_sys.pc.south_bridge.io_apic.pio_addr,
378                  x86_sys.pc.south_bridge.io_apic.pio_addr +
379                  APIC_range_size - 1),
380        AddrRange(IO_address_space_base,
381                  interrupts_address_space_base - 1),
382        AddrRange(pci_config_address_space_base,
383                  Addr.max)
384        ]
385
386    # Create a bridge from the IO bus to the memory bus to allow access to
387    # the local APIC (two pages)
388    x86_sys.apicbridge = Bridge(delay='50ns', nack_delay='4ns')
389    x86_sys.apicbridge.slave = x86_sys.iobus.master
390    x86_sys.apicbridge.master = x86_sys.membus.slave
391    x86_sys.apicbridge.ranges = [AddrRange(interrupts_address_space_base,
392                                           interrupts_address_space_base +
393                                           numCPUs * APIC_range_size
394                                           - 1)]
395
396    # connect the io bus
397    x86_sys.pc.attachIO(x86_sys.iobus)
398
399    x86_sys.system_port = x86_sys.membus.slave
400
401def connectX86RubySystem(x86_sys):
402    # North Bridge
403    x86_sys.piobus = Bus(bus_id=0)
404
405    #
406    # Pio functional accesses from devices need direct access to memory
407    # RubyPort currently does support functional accesses.  Therefore provide
408    # the piobus a direct connection to physical memory
409    #
410    x86_sys.piobus.master = x86_sys.physmem.port
411
412    x86_sys.pc.attachIO(x86_sys.piobus)
413
414
415def makeX86System(mem_mode, numCPUs = 1, mdesc = None, self = None, Ruby = False):
416    if self == None:
417        self = X86System()
418
419    if not mdesc:
420        # generic system
421        mdesc = SysConfig()
422    self.readfile = mdesc.script()
423
424    self.mem_mode = mem_mode
425
426    # Physical memory
427    self.physmem = PhysicalMemory(range = AddrRange(mdesc.mem()))
428
429    # Platform
430    self.pc = Pc()
431
432    # Create and connect the busses required by each memory system
433    if Ruby:
434        connectX86RubySystem(self)
435        # add the ide to the list of dma devices that later need to attach to
436        # dma controllers
437        self._dma_devices = [self.pc.south_bridge.ide]
438    else:
439        connectX86ClassicSystem(self, numCPUs)
440
441    self.intrctrl = IntrControl()
442
443    # Disks
444    disk0 = CowIdeDisk(driveID='master')
445    disk2 = CowIdeDisk(driveID='master')
446    disk0.childImage(mdesc.disk())
447    disk2.childImage(disk('linux-bigswap2.img'))
448    self.pc.south_bridge.ide.disks = [disk0, disk2]
449
450    # Add in a Bios information structure.
451    structures = [X86SMBiosBiosInformation()]
452    self.smbios_table.structures = structures
453
454    # Set up the Intel MP table
455    base_entries = []
456    ext_entries = []
457    for i in xrange(numCPUs):
458        bp = X86IntelMPProcessor(
459                local_apic_id = i,
460                local_apic_version = 0x14,
461                enable = True,
462                bootstrap = (i == 0))
463        base_entries.append(bp)
464    io_apic = X86IntelMPIOAPIC(
465            id = numCPUs,
466            version = 0x11,
467            enable = True,
468            address = 0xfec00000)
469    self.pc.south_bridge.io_apic.apic_id = io_apic.id
470    base_entries.append(io_apic)
471    isa_bus = X86IntelMPBus(bus_id = 0, bus_type='ISA')
472    base_entries.append(isa_bus)
473    pci_bus = X86IntelMPBus(bus_id = 1, bus_type='PCI')
474    base_entries.append(pci_bus)
475    connect_busses = X86IntelMPBusHierarchy(bus_id=0,
476            subtractive_decode=True, parent_bus=1)
477    ext_entries.append(connect_busses)
478    pci_dev4_inta = X86IntelMPIOIntAssignment(
479            interrupt_type = 'INT',
480            polarity = 'ConformPolarity',
481            trigger = 'ConformTrigger',
482            source_bus_id = 1,
483            source_bus_irq = 0 + (4 << 2),
484            dest_io_apic_id = io_apic.id,
485            dest_io_apic_intin = 16)
486    base_entries.append(pci_dev4_inta)
487    def assignISAInt(irq, apicPin):
488        assign_8259_to_apic = X86IntelMPIOIntAssignment(
489                interrupt_type = 'ExtInt',
490                polarity = 'ConformPolarity',
491                trigger = 'ConformTrigger',
492                source_bus_id = 0,
493                source_bus_irq = irq,
494                dest_io_apic_id = io_apic.id,
495                dest_io_apic_intin = 0)
496        base_entries.append(assign_8259_to_apic)
497        assign_to_apic = X86IntelMPIOIntAssignment(
498                interrupt_type = 'INT',
499                polarity = 'ConformPolarity',
500                trigger = 'ConformTrigger',
501                source_bus_id = 0,
502                source_bus_irq = irq,
503                dest_io_apic_id = io_apic.id,
504                dest_io_apic_intin = apicPin)
505        base_entries.append(assign_to_apic)
506    assignISAInt(0, 2)
507    assignISAInt(1, 1)
508    for i in range(3, 15):
509        assignISAInt(i, i)
510    self.intel_mp_table.base_entries = base_entries
511    self.intel_mp_table.ext_entries = ext_entries
512
513def setWorkCountOptions(system, options):
514    if options.work_item_id != None:
515        system.work_item_id = options.work_item_id
516    if options.work_begin_cpu_id_exit != None:
517        system.work_begin_cpu_id_exit = options.work_begin_cpu_id_exit
518    if options.work_end_exit_count != None:
519        system.work_end_exit_count = options.work_end_exit_count
520    if options.work_end_checkpoint_count != None:
521        system.work_end_ckpt_count = options.work_end_checkpoint_count
522    if options.work_begin_exit_count != None:
523        system.work_begin_exit_count = options.work_begin_exit_count
524    if options.work_begin_checkpoint_count != None:
525        system.work_begin_ckpt_count = options.work_begin_checkpoint_count
526    if options.work_cpus_checkpoint_count != None:
527        system.work_cpus_ckpt_count = options.work_cpus_checkpoint_count
528
529
530def makeLinuxX86System(mem_mode, numCPUs = 1, mdesc = None, Ruby = False):
531    self = LinuxX86System()
532
533    # Build up the x86 system and then specialize it for Linux
534    makeX86System(mem_mode, numCPUs, mdesc, self, Ruby)
535
536    # We assume below that there's at least 1MB of memory. We'll require 2
537    # just to avoid corner cases.
538    assert(self.physmem.range.second.getValue() >= 0x200000)
539
540    self.e820_table.entries = \
541       [
542        # Mark the first megabyte of memory as reserved
543        X86E820Entry(addr = 0, size = '1MB', range_type = 2),
544        # Mark the rest as available
545        X86E820Entry(addr = 0x100000,
546                size = '%dB' % (self.physmem.range.second - 0x100000 + 1),
547                range_type = 1)
548        ]
549
550    # Command line
551    self.boot_osflags = 'earlyprintk=ttyS0 console=ttyS0 lpj=7999923 ' + \
552                        'root=/dev/hda1'
553    return self
554
555
556def makeDualRoot(full_system, testSystem, driveSystem, dumpfile):
557    self = Root(full_system = full_system)
558    self.testsys = testSystem
559    self.drivesys = driveSystem
560    self.etherlink = EtherLink()
561    self.etherlink.int0 = Parent.testsys.tsunami.ethernet.interface
562    self.etherlink.int1 = Parent.drivesys.tsunami.ethernet.interface
563
564    if hasattr(testSystem, 'realview'):
565        self.etherlink.int0 = Parent.testsys.realview.ethernet.interface
566        self.etherlink.int1 = Parent.drivesys.realview.ethernet.interface
567    elif hasattr(testSystem, 'tsunami'):
568        self.etherlink.int0 = Parent.testsys.tsunami.ethernet.interface
569        self.etherlink.int1 = Parent.drivesys.tsunami.ethernet.interface
570    else:
571        fatal("Don't know how to connect these system together")
572
573    if dumpfile:
574        self.etherdump = EtherDump(file=dumpfile)
575        self.etherlink.dump = Parent.etherdump
576
577    return self
578
579def setMipsOptions(TestCPUClass):
580        #CP0 Configuration
581        TestCPUClass.CoreParams.CP0_PRId_CompanyOptions = 0
582        TestCPUClass.CoreParams.CP0_PRId_CompanyID = 1
583        TestCPUClass.CoreParams.CP0_PRId_ProcessorID = 147
584        TestCPUClass.CoreParams.CP0_PRId_Revision = 0
585
586        #CP0 Interrupt Control
587        TestCPUClass.CoreParams.CP0_IntCtl_IPTI = 7
588        TestCPUClass.CoreParams.CP0_IntCtl_IPPCI = 7
589
590        # Config Register
591        #TestCPUClass.CoreParams.CP0_Config_K23 = 0 # Since TLB
592        #TestCPUClass.CoreParams.CP0_Config_KU = 0 # Since TLB
593        TestCPUClass.CoreParams.CP0_Config_BE = 0 # Little Endian
594        TestCPUClass.CoreParams.CP0_Config_AR = 1 # Architecture Revision 2
595        TestCPUClass.CoreParams.CP0_Config_AT = 0 # MIPS32
596        TestCPUClass.CoreParams.CP0_Config_MT = 1 # TLB MMU
597        #TestCPUClass.CoreParams.CP0_Config_K0 = 2 # Uncached
598
599        #Config 1 Register
600        TestCPUClass.CoreParams.CP0_Config1_M = 1 # Config2 Implemented
601        TestCPUClass.CoreParams.CP0_Config1_MMU = 63 # TLB Size
602        # ***VERY IMPORTANT***
603        # Remember to modify CP0_Config1 according to cache specs
604        # Examine file ../common/Cache.py
605        TestCPUClass.CoreParams.CP0_Config1_IS = 1 # I-Cache Sets Per Way, 16KB cache, i.e., 1 (128)
606        TestCPUClass.CoreParams.CP0_Config1_IL = 5 # I-Cache Line Size, default in Cache.py is 64, i.e 5
607        TestCPUClass.CoreParams.CP0_Config1_IA = 1 # I-Cache Associativity, default in Cache.py is 2, i.e, a value of 1
608        TestCPUClass.CoreParams.CP0_Config1_DS = 2 # D-Cache Sets Per Way (see below), 32KB cache, i.e., 2
609        TestCPUClass.CoreParams.CP0_Config1_DL = 5 # D-Cache Line Size, default is 64, i.e., 5
610        TestCPUClass.CoreParams.CP0_Config1_DA = 1 # D-Cache Associativity, default is 2, i.e. 1
611        TestCPUClass.CoreParams.CP0_Config1_C2 = 0 # Coprocessor 2 not implemented(?)
612        TestCPUClass.CoreParams.CP0_Config1_MD = 0 # MDMX ASE not implemented in Mips32
613        TestCPUClass.CoreParams.CP0_Config1_PC = 1 # Performance Counters Implemented
614        TestCPUClass.CoreParams.CP0_Config1_WR = 0 # Watch Registers Implemented
615        TestCPUClass.CoreParams.CP0_Config1_CA = 0 # Mips16e NOT implemented
616        TestCPUClass.CoreParams.CP0_Config1_EP = 0 # EJTag Not Implemented
617        TestCPUClass.CoreParams.CP0_Config1_FP = 0 # FPU Implemented
618
619        #Config 2 Register
620        TestCPUClass.CoreParams.CP0_Config2_M = 1 # Config3 Implemented
621        TestCPUClass.CoreParams.CP0_Config2_TU = 0 # Tertiary Cache Control
622        TestCPUClass.CoreParams.CP0_Config2_TS = 0 # Tertiary Cache Sets Per Way
623        TestCPUClass.CoreParams.CP0_Config2_TL = 0 # Tertiary Cache Line Size
624        TestCPUClass.CoreParams.CP0_Config2_TA = 0 # Tertiary Cache Associativity
625        TestCPUClass.CoreParams.CP0_Config2_SU = 0 # Secondary Cache Control
626        TestCPUClass.CoreParams.CP0_Config2_SS = 0 # Secondary Cache Sets Per Way
627        TestCPUClass.CoreParams.CP0_Config2_SL = 0 # Secondary Cache Line Size
628        TestCPUClass.CoreParams.CP0_Config2_SA = 0 # Secondary Cache Associativity
629
630
631        #Config 3 Register
632        TestCPUClass.CoreParams.CP0_Config3_M = 0 # Config4 Not Implemented
633        TestCPUClass.CoreParams.CP0_Config3_DSPP = 1 # DSP ASE Present
634        TestCPUClass.CoreParams.CP0_Config3_LPA = 0 # Large Physical Addresses Not supported in Mips32
635        TestCPUClass.CoreParams.CP0_Config3_VEIC = 0 # EIC Supported
636        TestCPUClass.CoreParams.CP0_Config3_VInt = 0 # Vectored Interrupts Implemented
637        TestCPUClass.CoreParams.CP0_Config3_SP = 0 # Small Pages Supported (PageGrain reg. exists)
638        TestCPUClass.CoreParams.CP0_Config3_MT = 0 # MT Not present
639        TestCPUClass.CoreParams.CP0_Config3_SM = 0 # SmartMIPS ASE Not implemented
640        TestCPUClass.CoreParams.CP0_Config3_TL = 0 # TraceLogic Not implemented
641
642        #SRS Ctl - HSS
643        TestCPUClass.CoreParams.CP0_SrsCtl_HSS = 3 # Four shadow register sets implemented
644
645
646        #TestCPUClass.CoreParams.tlb = TLB()
647        #TestCPUClass.CoreParams.UnifiedTLB = 1
648