FSConfig.py revision 7949:e59dac494020 
1# Copyright (c) 2010 ARM Limited
2# All rights reserved.
3#
4# The license below extends only to copyright in the software and shall
5# not be construed as granting a license to any other intellectual
6# property including but not limited to intellectual property relating
7# to a hardware implementation of the functionality of the software
8# licensed hereunder.  You may use the software subject to the license
9# terms below provided that you ensure that this notice is replicated
10# unmodified and in its entirety in all distributions of the software,
11# modified or unmodified, in source code or in binary form.
12#
13# Copyright (c) 2010-2011 Advanced Micro Devices, Inc.
14# Copyright (c) 2006-2008 The Regents of The University of Michigan
15# All rights reserved.
16#
17# Redistribution and use in source and binary forms, with or without
18# modification, are permitted provided that the following conditions are
19# met: redistributions of source code must retain the above copyright
20# notice, this list of conditions and the following disclaimer;
21# redistributions in binary form must reproduce the above copyright
22# notice, this list of conditions and the following disclaimer in the
23# documentation and/or other materials provided with the distribution;
24# neither the name of the copyright holders nor the names of its
25# contributors may be used to endorse or promote products derived from
26# this software without specific prior written permission.
27#
28# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39#
40# Authors: Kevin Lim
41
42from m5.objects import *
43from Benchmarks import *
44
45class CowIdeDisk(IdeDisk):
46    image = CowDiskImage(child=RawDiskImage(read_only=True),
47                         read_only=False)
48
49    def childImage(self, ci):
50        self.image.child.image_file = ci
51
52class MemBus(Bus):
53    badaddr_responder = BadAddr()
54    default = Self.badaddr_responder.pio
55
56
57def makeLinuxAlphaSystem(mem_mode, mdesc = None):
58    class BaseTsunami(Tsunami):
59        ethernet = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
60        ide = IdeController(disks=[Parent.disk0, Parent.disk2],
61                            pci_func=0, pci_dev=0, pci_bus=0)
62
63    self = LinuxAlphaSystem()
64    if not mdesc:
65        # generic system
66        mdesc = SysConfig()
67    self.readfile = mdesc.script()
68    self.iobus = Bus(bus_id=0)
69    self.membus = MemBus(bus_id=1)
70    self.bridge = Bridge(delay='50ns', nack_delay='4ns')
71    self.physmem = PhysicalMemory(range = AddrRange(mdesc.mem()))
72    self.bridge.side_a = self.iobus.port
73    self.bridge.side_b = self.membus.port
74    self.physmem.port = self.membus.port
75    self.disk0 = CowIdeDisk(driveID='master')
76    self.disk2 = CowIdeDisk(driveID='master')
77    self.disk0.childImage(mdesc.disk())
78    self.disk2.childImage(disk('linux-bigswap2.img'))
79    self.tsunami = BaseTsunami()
80    self.tsunami.attachIO(self.iobus)
81    self.tsunami.ide.pio = self.iobus.port
82    self.tsunami.ethernet.pio = self.iobus.port
83    self.simple_disk = SimpleDisk(disk=RawDiskImage(image_file = mdesc.disk(),
84                                               read_only = True))
85    self.intrctrl = IntrControl()
86    self.mem_mode = mem_mode
87    self.terminal = Terminal()
88    self.kernel = binary('vmlinux')
89    self.pal = binary('ts_osfpal')
90    self.console = binary('console')
91    self.boot_osflags = 'root=/dev/hda1 console=ttyS0'
92
93    return self
94
95def makeLinuxAlphaRubySystem(mem_mode, mdesc = None):
96    class BaseTsunami(Tsunami):
97        ethernet = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
98        ide = IdeController(disks=[Parent.disk0, Parent.disk2],
99                            pci_func=0, pci_dev=0, pci_bus=0)
100
101    physmem = PhysicalMemory(range = AddrRange(mdesc.mem()))
102    self = LinuxAlphaSystem(physmem = physmem)
103    if not mdesc:
104        # generic system
105        mdesc = SysConfig()
106    self.readfile = mdesc.script()
107
108    # Create pio bus to connect all device pio ports to rubymem's pio port
109    self.piobus = Bus(bus_id=0)
110
111    #
112    # Pio functional accesses from devices need direct access to memory
113    # RubyPort currently does support functional accesses.  Therefore provide
114    # the piobus a direct connection to physical memory
115    #
116    self.piobus.port = physmem.port
117
118    self.disk0 = CowIdeDisk(driveID='master')
119    self.disk2 = CowIdeDisk(driveID='master')
120    self.disk0.childImage(mdesc.disk())
121    self.disk2.childImage(disk('linux-bigswap2.img'))
122    self.tsunami = BaseTsunami()
123    self.tsunami.attachIO(self.piobus)
124    self.tsunami.ide.pio = self.piobus.port
125    self.tsunami.ethernet.pio = self.piobus.port
126
127    #
128    # Store the dma devices for later connection to dma ruby ports.
129    # Append an underscore to dma_devices to avoid the SimObjectVector check.
130    #
131    self._dma_devices = [self.tsunami.ide, self.tsunami.ethernet]
132
133    self.simple_disk = SimpleDisk(disk=RawDiskImage(image_file = mdesc.disk(),
134                                               read_only = True))
135    self.intrctrl = IntrControl()
136    self.mem_mode = mem_mode
137    self.terminal = Terminal()
138    self.kernel = binary('vmlinux')
139    self.pal = binary('ts_osfpal')
140    self.console = binary('console')
141    self.boot_osflags = 'root=/dev/hda1 console=ttyS0'
142
143    return self
144
145def makeSparcSystem(mem_mode, mdesc = None):
146    class CowMmDisk(MmDisk):
147        image = CowDiskImage(child=RawDiskImage(read_only=True),
148                             read_only=False)
149
150        def childImage(self, ci):
151            self.image.child.image_file = ci
152
153    self = SparcSystem()
154    if not mdesc:
155        # generic system
156        mdesc = SysConfig()
157    self.readfile = mdesc.script()
158    self.iobus = Bus(bus_id=0)
159    self.membus = MemBus(bus_id=1)
160    self.bridge = Bridge(delay='50ns', nack_delay='4ns')
161    self.t1000 = T1000()
162    self.t1000.attachOnChipIO(self.membus)
163    self.t1000.attachIO(self.iobus)
164    self.physmem = PhysicalMemory(range = AddrRange(Addr('1MB'), size = '64MB'), zero = True)
165    self.physmem2 = PhysicalMemory(range = AddrRange(Addr('2GB'), size ='256MB'), zero = True)
166    self.bridge.side_a = self.iobus.port
167    self.bridge.side_b = self.membus.port
168    self.physmem.port = self.membus.port
169    self.physmem2.port = self.membus.port
170    self.rom.port = self.membus.port
171    self.nvram.port = self.membus.port
172    self.hypervisor_desc.port = self.membus.port
173    self.partition_desc.port = self.membus.port
174    self.intrctrl = IntrControl()
175    self.disk0 = CowMmDisk()
176    self.disk0.childImage(disk('disk.s10hw2'))
177    self.disk0.pio = self.iobus.port
178    self.reset_bin = binary('reset_new.bin')
179    self.hypervisor_bin = binary('q_new.bin')
180    self.openboot_bin = binary('openboot_new.bin')
181    self.nvram_bin = binary('nvram1')
182    self.hypervisor_desc_bin = binary('1up-hv.bin')
183    self.partition_desc_bin = binary('1up-md.bin')
184
185    return self
186
187def makeLinuxArmSystem(mem_mode, mdesc = None, bare_metal=False,
188        machine_type = None):
189    if bare_metal:
190        self = ArmSystem()
191    else:
192        self = LinuxArmSystem()
193
194    if not mdesc:
195        # generic system
196        mdesc = SysConfig()
197
198    self.readfile = mdesc.script()
199    self.iobus = Bus(bus_id=0)
200    self.membus = MemBus(bus_id=1)
201    self.membus.badaddr_responder.warn_access = "warn"
202    self.bridge = Bridge(delay='50ns', nack_delay='4ns')
203    self.physmem = PhysicalMemory(range = AddrRange(mdesc.mem()), zero = True)
204    self.diskmem = PhysicalMemory(range = AddrRange(Addr('128MB'), size = '128MB'),
205                                  file = disk('ael-arm.ext2'))
206    self.bridge.side_a = self.iobus.port
207    self.bridge.side_b = self.membus.port
208    self.physmem.port = self.membus.port
209    self.diskmem.port = self.membus.port
210
211    self.mem_mode = mem_mode
212
213    #self.cf0 = CowIdeDisk(driveID='master')
214    #self.cf0.childImage(mdesc.disk())
215    #self.cf_ctrl = IdeController(disks=[self.cf0],
216    #                             pci_func = 0, pci_dev = 0, pci_bus = 0,
217    #                             io_shift = 1, ctrl_offset = 2, Command = 0x1,
218    #                             BAR0 = 0x18000000, BAR0Size = '16B',
219    #                             BAR1 = 0x18000100, BAR1Size = '1B',
220    #                             BAR0LegacyIO = True, BAR1LegacyIO = True,)
221    #self.cf_ctrl.pio = self.iobus.port
222
223    if machine_type == "RealView_PBX":
224        self.realview = RealViewPBX()
225    elif machine_type == "RealView_EB":
226        self.realview = RealViewEB()
227    else:
228        print "Unknown Machine Type"
229        sys.exit(1)
230
231    if not bare_metal and machine_type:
232        self.machine_type = machine_type
233    elif bare_metal:
234        self.realview.uart.end_on_eot = True
235
236    self.realview.attachOnChipIO(self.membus)
237    self.realview.attachIO(self.iobus)
238
239    self.intrctrl = IntrControl()
240    self.terminal = Terminal()
241    self.vncserver = VncServer()
242    self.kernel = binary('vmlinux.arm')
243    self.boot_osflags = 'earlyprintk mem=128MB console=ttyAMA0 lpj=19988480' + \
244                        ' norandmaps slram=slram0,0x8000000,+0x8000000' +      \
245                        ' mtdparts=slram0:- rw loglevel=8 root=/dev/mtdblock0'
246
247    return self
248
249
250def makeLinuxMipsSystem(mem_mode, mdesc = None):
251    class BaseMalta(Malta):
252        ethernet = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
253        ide = IdeController(disks=[Parent.disk0, Parent.disk2],
254                            pci_func=0, pci_dev=0, pci_bus=0)
255
256    self = LinuxMipsSystem()
257    if not mdesc:
258        # generic system
259        mdesc = SysConfig()
260    self.readfile = mdesc.script()
261    self.iobus = Bus(bus_id=0)
262    self.membus = MemBus(bus_id=1)
263    self.bridge = Bridge(delay='50ns', nack_delay='4ns')
264    self.physmem = PhysicalMemory(range = AddrRange('1GB'))
265    self.bridge.side_a = self.iobus.port
266    self.bridge.side_b = self.membus.port
267    self.physmem.port = self.membus.port
268    self.disk0 = CowIdeDisk(driveID='master')
269    self.disk2 = CowIdeDisk(driveID='master')
270    self.disk0.childImage(mdesc.disk())
271    self.disk2.childImage(disk('linux-bigswap2.img'))
272    self.malta = BaseMalta()
273    self.malta.attachIO(self.iobus)
274    self.malta.ide.pio = self.iobus.port
275    self.malta.ethernet.pio = self.iobus.port
276    self.simple_disk = SimpleDisk(disk=RawDiskImage(image_file = mdesc.disk(),
277                                               read_only = True))
278    self.intrctrl = IntrControl()
279    self.mem_mode = mem_mode
280    self.terminal = Terminal()
281    self.kernel = binary('mips/vmlinux')
282    self.console = binary('mips/console')
283    self.boot_osflags = 'root=/dev/hda1 console=ttyS0'
284
285    return self
286
287def x86IOAddress(port):
288    IO_address_space_base = 0x8000000000000000
289    return IO_address_space_base + port;
290
291def connectX86ClassicSystem(x86_sys):
292    x86_sys.membus = MemBus(bus_id=1)
293    x86_sys.physmem.port = x86_sys.membus.port
294
295    # North Bridge
296    x86_sys.iobus = Bus(bus_id=0)
297    x86_sys.bridge = Bridge(delay='50ns', nack_delay='4ns')
298    x86_sys.bridge.side_a = x86_sys.iobus.port
299    x86_sys.bridge.side_b = x86_sys.membus.port
300
301    # connect the io bus
302    x86_sys.pc.attachIO(x86_sys.iobus)
303
304def connectX86RubySystem(x86_sys):
305    # North Bridge
306    x86_sys.piobus = Bus(bus_id=0)
307
308    #
309    # Pio functional accesses from devices need direct access to memory
310    # RubyPort currently does support functional accesses.  Therefore provide
311    # the piobus a direct connection to physical memory
312    #
313    x86_sys.piobus.port = x86_sys.physmem.port
314
315    x86_sys.pc.attachIO(x86_sys.piobus)
316
317
318def makeX86System(mem_mode, numCPUs = 1, mdesc = None, self = None, Ruby = False):
319    if self == None:
320        self = X86System()
321
322    if not mdesc:
323        # generic system
324        mdesc = SysConfig()
325    self.readfile = mdesc.script()
326
327    self.mem_mode = mem_mode
328
329    # Physical memory
330    self.physmem = PhysicalMemory(range = AddrRange(mdesc.mem()))
331
332    # Platform
333    self.pc = Pc()
334
335    # Create and connect the busses required by each memory system
336    if Ruby:
337        connectX86RubySystem(self)
338        # add the ide to the list of dma devices that later need to attach to
339        # dma controllers
340        self._dma_devices = [self.pc.south_bridge.ide]
341    else:
342        connectX86ClassicSystem(self)
343
344    self.intrctrl = IntrControl()
345
346    # Disks
347    disk0 = CowIdeDisk(driveID='master')
348    disk2 = CowIdeDisk(driveID='master')
349    disk0.childImage(mdesc.disk())
350    disk2.childImage(disk('linux-bigswap2.img'))
351    self.pc.south_bridge.ide.disks = [disk0, disk2]
352
353    # Add in a Bios information structure.
354    structures = [X86SMBiosBiosInformation()]
355    self.smbios_table.structures = structures
356
357    # Set up the Intel MP table
358    for i in xrange(numCPUs):
359        bp = X86IntelMPProcessor(
360                local_apic_id = i,
361                local_apic_version = 0x14,
362                enable = True,
363                bootstrap = (i == 0))
364        self.intel_mp_table.add_entry(bp)
365    io_apic = X86IntelMPIOAPIC(
366            id = numCPUs,
367            version = 0x11,
368            enable = True,
369            address = 0xfec00000)
370    self.pc.south_bridge.io_apic.apic_id = io_apic.id
371    self.intel_mp_table.add_entry(io_apic)
372    isa_bus = X86IntelMPBus(bus_id = 0, bus_type='ISA')
373    self.intel_mp_table.add_entry(isa_bus)
374    pci_bus = X86IntelMPBus(bus_id = 1, bus_type='PCI')
375    self.intel_mp_table.add_entry(pci_bus)
376    connect_busses = X86IntelMPBusHierarchy(bus_id=0,
377            subtractive_decode=True, parent_bus=1)
378    self.intel_mp_table.add_entry(connect_busses)
379    pci_dev4_inta = X86IntelMPIOIntAssignment(
380            interrupt_type = 'INT',
381            polarity = 'ConformPolarity',
382            trigger = 'ConformTrigger',
383            source_bus_id = 1,
384            source_bus_irq = 0 + (4 << 2),
385            dest_io_apic_id = io_apic.id,
386            dest_io_apic_intin = 16)
387    self.intel_mp_table.add_entry(pci_dev4_inta);
388    def assignISAInt(irq, apicPin):
389        assign_8259_to_apic = X86IntelMPIOIntAssignment(
390                interrupt_type = 'ExtInt',
391                polarity = 'ConformPolarity',
392                trigger = 'ConformTrigger',
393                source_bus_id = 0,
394                source_bus_irq = irq,
395                dest_io_apic_id = io_apic.id,
396                dest_io_apic_intin = 0)
397        self.intel_mp_table.add_entry(assign_8259_to_apic)
398        assign_to_apic = X86IntelMPIOIntAssignment(
399                interrupt_type = 'INT',
400                polarity = 'ConformPolarity',
401                trigger = 'ConformTrigger',
402                source_bus_id = 0,
403                source_bus_irq = irq,
404                dest_io_apic_id = io_apic.id,
405                dest_io_apic_intin = apicPin)
406        self.intel_mp_table.add_entry(assign_to_apic)
407    assignISAInt(0, 2)
408    assignISAInt(1, 1)
409    for i in range(3, 15):
410        assignISAInt(i, i)
411
412def setWorkCountOptions(system, options):
413    if options.work_item_id != None:
414        system.work_item_id = options.work_item_id
415    if options.work_begin_cpu_id_exit != None:
416        system.work_begin_cpu_id_exit = options.work_begin_cpu_id_exit
417    if options.work_end_exit_count != None:
418        system.work_end_exit_count = options.work_end_exit_count
419    if options.work_end_checkpoint_count != None:
420        system.work_end_ckpt_count = options.work_end_checkpoint_count
421    if options.work_begin_exit_count != None:
422        system.work_begin_exit_count = options.work_begin_exit_count
423    if options.work_begin_checkpoint_count != None:
424        system.work_begin_ckpt_count = options.work_begin_checkpoint_count
425    if options.work_cpus_checkpoint_count != None:
426        system.work_cpus_ckpt_count = options.work_cpus_checkpoint_count
427
428
429def makeLinuxX86System(mem_mode, numCPUs = 1, mdesc = None, Ruby = False):
430    self = LinuxX86System()
431
432    # Build up the x86 system and then specialize it for Linux
433    makeX86System(mem_mode, numCPUs, mdesc, self, Ruby)
434
435    # We assume below that there's at least 1MB of memory. We'll require 2
436    # just to avoid corner cases.
437    assert(self.physmem.range.second.getValue() >= 0x200000)
438
439    # Mark the first megabyte of memory as reserved
440    self.e820_table.entries.append(X86E820Entry(
441                addr = 0,
442                size = '1MB',
443                range_type = 2))
444
445    # Mark the rest as available
446    self.e820_table.entries.append(X86E820Entry(
447                addr = 0x100000,
448                size = '%dB' % (self.physmem.range.second - 0x100000 + 1),
449                range_type = 1))
450
451    # Command line
452    self.boot_osflags = 'earlyprintk=ttyS0 console=ttyS0 lpj=7999923 ' + \
453                        'root=/dev/hda1'
454    return self
455
456
457def makeDualRoot(testSystem, driveSystem, dumpfile):
458    self = Root()
459    self.testsys = testSystem
460    self.drivesys = driveSystem
461    self.etherlink = EtherLink()
462    self.etherlink.int0 = Parent.testsys.tsunami.ethernet.interface
463    self.etherlink.int1 = Parent.drivesys.tsunami.ethernet.interface
464
465    if dumpfile:
466        self.etherdump = EtherDump(file=dumpfile)
467        self.etherlink.dump = Parent.etherdump
468
469    return self
470
471def setMipsOptions(TestCPUClass):
472        #CP0 Configuration
473        TestCPUClass.CoreParams.CP0_PRId_CompanyOptions = 0
474        TestCPUClass.CoreParams.CP0_PRId_CompanyID = 1
475        TestCPUClass.CoreParams.CP0_PRId_ProcessorID = 147
476        TestCPUClass.CoreParams.CP0_PRId_Revision = 0
477
478        #CP0 Interrupt Control
479        TestCPUClass.CoreParams.CP0_IntCtl_IPTI = 7
480        TestCPUClass.CoreParams.CP0_IntCtl_IPPCI = 7
481
482        # Config Register
483        #TestCPUClass.CoreParams.CP0_Config_K23 = 0 # Since TLB
484        #TestCPUClass.CoreParams.CP0_Config_KU = 0 # Since TLB
485        TestCPUClass.CoreParams.CP0_Config_BE = 0 # Little Endian
486        TestCPUClass.CoreParams.CP0_Config_AR = 1 # Architecture Revision 2
487        TestCPUClass.CoreParams.CP0_Config_AT = 0 # MIPS32
488        TestCPUClass.CoreParams.CP0_Config_MT = 1 # TLB MMU
489        #TestCPUClass.CoreParams.CP0_Config_K0 = 2 # Uncached
490
491        #Config 1 Register
492        TestCPUClass.CoreParams.CP0_Config1_M = 1 # Config2 Implemented
493        TestCPUClass.CoreParams.CP0_Config1_MMU = 63 # TLB Size
494        # ***VERY IMPORTANT***
495        # Remember to modify CP0_Config1 according to cache specs
496        # Examine file ../common/Cache.py
497        TestCPUClass.CoreParams.CP0_Config1_IS = 1 # I-Cache Sets Per Way, 16KB cache, i.e., 1 (128)
498        TestCPUClass.CoreParams.CP0_Config1_IL = 5 # I-Cache Line Size, default in Cache.py is 64, i.e 5
499        TestCPUClass.CoreParams.CP0_Config1_IA = 1 # I-Cache Associativity, default in Cache.py is 2, i.e, a value of 1
500        TestCPUClass.CoreParams.CP0_Config1_DS = 2 # D-Cache Sets Per Way (see below), 32KB cache, i.e., 2
501        TestCPUClass.CoreParams.CP0_Config1_DL = 5 # D-Cache Line Size, default is 64, i.e., 5
502        TestCPUClass.CoreParams.CP0_Config1_DA = 1 # D-Cache Associativity, default is 2, i.e. 1
503        TestCPUClass.CoreParams.CP0_Config1_C2 = 0 # Coprocessor 2 not implemented(?)
504        TestCPUClass.CoreParams.CP0_Config1_MD = 0 # MDMX ASE not implemented in Mips32
505        TestCPUClass.CoreParams.CP0_Config1_PC = 1 # Performance Counters Implemented
506        TestCPUClass.CoreParams.CP0_Config1_WR = 0 # Watch Registers Implemented
507        TestCPUClass.CoreParams.CP0_Config1_CA = 0 # Mips16e NOT implemented
508        TestCPUClass.CoreParams.CP0_Config1_EP = 0 # EJTag Not Implemented
509        TestCPUClass.CoreParams.CP0_Config1_FP = 0 # FPU Implemented
510
511        #Config 2 Register
512        TestCPUClass.CoreParams.CP0_Config2_M = 1 # Config3 Implemented
513        TestCPUClass.CoreParams.CP0_Config2_TU = 0 # Tertiary Cache Control
514        TestCPUClass.CoreParams.CP0_Config2_TS = 0 # Tertiary Cache Sets Per Way
515        TestCPUClass.CoreParams.CP0_Config2_TL = 0 # Tertiary Cache Line Size
516        TestCPUClass.CoreParams.CP0_Config2_TA = 0 # Tertiary Cache Associativity
517        TestCPUClass.CoreParams.CP0_Config2_SU = 0 # Secondary Cache Control
518        TestCPUClass.CoreParams.CP0_Config2_SS = 0 # Secondary Cache Sets Per Way
519        TestCPUClass.CoreParams.CP0_Config2_SL = 0 # Secondary Cache Line Size
520        TestCPUClass.CoreParams.CP0_Config2_SA = 0 # Secondary Cache Associativity
521
522
523        #Config 3 Register
524        TestCPUClass.CoreParams.CP0_Config3_M = 0 # Config4 Not Implemented
525        TestCPUClass.CoreParams.CP0_Config3_DSPP = 1 # DSP ASE Present
526        TestCPUClass.CoreParams.CP0_Config3_LPA = 0 # Large Physical Addresses Not supported in Mips32
527        TestCPUClass.CoreParams.CP0_Config3_VEIC = 0 # EIC Supported
528        TestCPUClass.CoreParams.CP0_Config3_VInt = 0 # Vectored Interrupts Implemented
529        TestCPUClass.CoreParams.CP0_Config3_SP = 0 # Small Pages Supported (PageGrain reg. exists)
530        TestCPUClass.CoreParams.CP0_Config3_MT = 0 # MT Not present
531        TestCPUClass.CoreParams.CP0_Config3_SM = 0 # SmartMIPS ASE Not implemented
532        TestCPUClass.CoreParams.CP0_Config3_TL = 0 # TraceLogic Not implemented
533
534        #SRS Ctl - HSS
535        TestCPUClass.CoreParams.CP0_SrsCtl_HSS = 3 # Four shadow register sets implemented
536
537
538        #TestCPUClass.CoreParams.tlb = TLB()
539        #TestCPUClass.CoreParams.UnifiedTLB = 1
540