FSConfig.py revision 10353:dfebd39c48a7 
1# Copyright (c) 2010-2012 ARM Limited
2# All rights reserved.
3#
4# The license below extends only to copyright in the software and shall
5# not be construed as granting a license to any other intellectual
6# property including but not limited to intellectual property relating
7# to a hardware implementation of the functionality of the software
8# licensed hereunder.  You may use the software subject to the license
9# terms below provided that you ensure that this notice is replicated
10# unmodified and in its entirety in all distributions of the software,
11# modified or unmodified, in source code or in binary form.
12#
13# Copyright (c) 2010-2011 Advanced Micro Devices, Inc.
14# Copyright (c) 2006-2008 The Regents of The University of Michigan
15# All rights reserved.
16#
17# Redistribution and use in source and binary forms, with or without
18# modification, are permitted provided that the following conditions are
19# met: redistributions of source code must retain the above copyright
20# notice, this list of conditions and the following disclaimer;
21# redistributions in binary form must reproduce the above copyright
22# notice, this list of conditions and the following disclaimer in the
23# documentation and/or other materials provided with the distribution;
24# neither the name of the copyright holders nor the names of its
25# contributors may be used to endorse or promote products derived from
26# this software without specific prior written permission.
27#
28# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39#
40# Authors: Kevin Lim
41
42from m5.objects import *
43from Benchmarks import *
44from m5.util import *
45
46class CowIdeDisk(IdeDisk):
47    image = CowDiskImage(child=RawDiskImage(read_only=True),
48                         read_only=False)
49
50    def childImage(self, ci):
51        self.image.child.image_file = ci
52
53class MemBus(CoherentBus):
54    badaddr_responder = BadAddr()
55    default = Self.badaddr_responder.pio
56
57
58def makeLinuxAlphaSystem(mem_mode, mdesc = None, ruby = False):
59
60    class BaseTsunami(Tsunami):
61        ethernet = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
62        ide = IdeController(disks=[Parent.disk0, Parent.disk2],
63                            pci_func=0, pci_dev=0, pci_bus=0)
64
65    self = LinuxAlphaSystem()
66    if not mdesc:
67        # generic system
68        mdesc = SysConfig()
69    self.readfile = mdesc.script()
70
71    self.tsunami = BaseTsunami()
72
73    # Create the io bus to connect all device ports
74    self.iobus = NoncoherentBus()
75    self.tsunami.attachIO(self.iobus)
76
77    self.tsunami.ide.pio = self.iobus.master
78    self.tsunami.ide.config = self.iobus.master
79
80    self.tsunami.ethernet.pio = self.iobus.master
81    self.tsunami.ethernet.config = self.iobus.master
82
83    if ruby:
84        # Store the dma devices for later connection to dma ruby ports.
85        # Append an underscore to dma_ports to avoid the SimObjectVector check.
86        self._dma_ports = [self.tsunami.ide.dma, self.tsunami.ethernet.dma]
87    else:
88        self.membus = MemBus()
89
90        # By default the bridge responds to all addresses above the I/O
91        # base address (including the PCI config space)
92        IO_address_space_base = 0x80000000000
93        self.bridge = Bridge(delay='50ns',
94                         ranges = [AddrRange(IO_address_space_base, Addr.max)])
95        self.bridge.master = self.iobus.slave
96        self.bridge.slave = self.membus.master
97
98        self.tsunami.ide.dma = self.iobus.slave
99        self.tsunami.ethernet.dma = self.iobus.slave
100
101        self.system_port = self.membus.slave
102
103    self.mem_ranges = [AddrRange(mdesc.mem())]
104    self.disk0 = CowIdeDisk(driveID='master')
105    self.disk2 = CowIdeDisk(driveID='master')
106    self.disk0.childImage(mdesc.disk())
107    self.disk2.childImage(disk('linux-bigswap2.img'))
108    self.simple_disk = SimpleDisk(disk=RawDiskImage(image_file = mdesc.disk(),
109                                               read_only = True))
110    self.intrctrl = IntrControl()
111    self.mem_mode = mem_mode
112    self.terminal = Terminal()
113    self.kernel = binary('vmlinux')
114    self.pal = binary('ts_osfpal')
115    self.console = binary('console')
116    self.boot_osflags = 'root=/dev/hda1 console=ttyS0'
117
118    return self
119
120def makeSparcSystem(mem_mode, mdesc = None):
121    # Constants from iob.cc and uart8250.cc
122    iob_man_addr = 0x9800000000
123    uart_pio_size = 8
124
125    class CowMmDisk(MmDisk):
126        image = CowDiskImage(child=RawDiskImage(read_only=True),
127                             read_only=False)
128
129        def childImage(self, ci):
130            self.image.child.image_file = ci
131
132    self = SparcSystem()
133    if not mdesc:
134        # generic system
135        mdesc = SysConfig()
136    self.readfile = mdesc.script()
137    self.iobus = NoncoherentBus()
138    self.membus = MemBus()
139    self.bridge = Bridge(delay='50ns')
140    self.t1000 = T1000()
141    self.t1000.attachOnChipIO(self.membus)
142    self.t1000.attachIO(self.iobus)
143    self.mem_ranges = [AddrRange(Addr('1MB'), size = '64MB'),
144                       AddrRange(Addr('2GB'), size ='256MB')]
145    self.bridge.master = self.iobus.slave
146    self.bridge.slave = self.membus.master
147    self.rom.port = self.membus.master
148    self.nvram.port = self.membus.master
149    self.hypervisor_desc.port = self.membus.master
150    self.partition_desc.port = self.membus.master
151    self.intrctrl = IntrControl()
152    self.disk0 = CowMmDisk()
153    self.disk0.childImage(disk('disk.s10hw2'))
154    self.disk0.pio = self.iobus.master
155
156    # The puart0 and hvuart are placed on the IO bus, so create ranges
157    # for them. The remaining IO range is rather fragmented, so poke
158    # holes for the iob and partition descriptors etc.
159    self.bridge.ranges = \
160        [
161        AddrRange(self.t1000.puart0.pio_addr,
162                  self.t1000.puart0.pio_addr + uart_pio_size - 1),
163        AddrRange(self.disk0.pio_addr,
164                  self.t1000.fake_jbi.pio_addr +
165                  self.t1000.fake_jbi.pio_size - 1),
166        AddrRange(self.t1000.fake_clk.pio_addr,
167                  iob_man_addr - 1),
168        AddrRange(self.t1000.fake_l2_1.pio_addr,
169                  self.t1000.fake_ssi.pio_addr +
170                  self.t1000.fake_ssi.pio_size - 1),
171        AddrRange(self.t1000.hvuart.pio_addr,
172                  self.t1000.hvuart.pio_addr + uart_pio_size - 1)
173        ]
174    self.reset_bin = binary('reset_new.bin')
175    self.hypervisor_bin = binary('q_new.bin')
176    self.openboot_bin = binary('openboot_new.bin')
177    self.nvram_bin = binary('nvram1')
178    self.hypervisor_desc_bin = binary('1up-hv.bin')
179    self.partition_desc_bin = binary('1up-md.bin')
180
181    self.system_port = self.membus.slave
182
183    return self
184
185def makeArmSystem(mem_mode, machine_type, mdesc = None,
186                  dtb_filename = None, bare_metal=False):
187    assert machine_type
188
189    if bare_metal:
190        self = ArmSystem()
191    else:
192        self = LinuxArmSystem()
193
194    if not mdesc:
195        # generic system
196        mdesc = SysConfig()
197
198    self.readfile = mdesc.script()
199    self.iobus = NoncoherentBus()
200    self.membus = MemBus()
201    self.membus.badaddr_responder.warn_access = "warn"
202    self.bridge = Bridge(delay='50ns')
203    self.bridge.master = self.iobus.slave
204    self.bridge.slave = self.membus.master
205
206    self.mem_mode = mem_mode
207
208    if machine_type == "RealView_PBX":
209        self.realview = RealViewPBX()
210    elif machine_type == "RealView_EB":
211        self.realview = RealViewEB()
212    elif machine_type == "VExpress_ELT":
213        self.realview = VExpress_ELT()
214    elif machine_type == "VExpress_EMM":
215        self.realview = VExpress_EMM()
216    elif machine_type == "VExpress_EMM64":
217        self.realview = VExpress_EMM64()
218    else:
219        print "Unknown Machine Type"
220        sys.exit(1)
221
222    self.cf0 = CowIdeDisk(driveID='master')
223    self.cf0.childImage(mdesc.disk())
224
225    # Attach any PCI devices this platform supports
226    self.realview.attachPciDevices()
227    # default to an IDE controller rather than a CF one
228    # assuming we've got one; EMM64 is an exception for the moment
229    if machine_type != "VExpress_EMM64":
230        try:
231            self.realview.ide.disks = [self.cf0]
232        except:
233            self.realview.cf_ctrl.disks = [self.cf0]
234    else:
235        self.realview.cf_ctrl.disks = [self.cf0]
236
237    if bare_metal:
238        # EOT character on UART will end the simulation
239        self.realview.uart.end_on_eot = True
240        self.mem_ranges = [AddrRange(self.realview.mem_start_addr,
241                                     size = mdesc.mem())]
242    else:
243        if machine_type == "VExpress_EMM64":
244            self.kernel = binary('vmlinux-3.14-aarch64-vexpress-emm64')
245        elif machine_type == "VExpress_EMM":
246            self.kernel = binary('vmlinux-3.3-arm-vexpress-emm-pcie')
247        else:
248            self.kernel = binary('vmlinux.arm.smp.fb.2.6.38.8')
249
250        if dtb_filename:
251            self.dtb_filename = binary(dtb_filename)
252        self.machine_type = machine_type
253        if convert.toMemorySize(mdesc.mem()) > int(self.realview.max_mem_size):
254            print "The currently selected ARM platforms doesn't support"
255            print " the amount of DRAM you've selected. Please try"
256            print " another platform"
257            sys.exit(1)
258
259        # Ensure that writes to the UART actually go out early in the boot
260        boot_flags = 'earlyprintk=pl011,0x1c090000 console=ttyAMA0 ' + \
261                     'lpj=19988480 norandmaps rw loglevel=8 ' + \
262                     'mem=%s root=/dev/sda1' % mdesc.mem()
263
264        self.mem_ranges = [AddrRange(self.realview.mem_start_addr,
265                                     size = mdesc.mem())]
266        self.realview.setupBootLoader(self.membus, self, binary)
267        self.gic_cpu_addr = self.realview.gic.cpu_addr
268        self.flags_addr = self.realview.realview_io.pio_addr + 0x30
269
270        if mdesc.disk().lower().count('android'):
271            boot_flags += " init=/init "
272        self.boot_osflags = boot_flags
273    self.realview.attachOnChipIO(self.membus, self.bridge)
274    self.realview.attachIO(self.iobus)
275    self.intrctrl = IntrControl()
276    self.terminal = Terminal()
277    self.vncserver = VncServer()
278
279    self.system_port = self.membus.slave
280
281    return self
282
283
284def makeLinuxMipsSystem(mem_mode, mdesc = None):
285    class BaseMalta(Malta):
286        ethernet = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
287        ide = IdeController(disks=[Parent.disk0, Parent.disk2],
288                            pci_func=0, pci_dev=0, pci_bus=0)
289
290    self = LinuxMipsSystem()
291    if not mdesc:
292        # generic system
293        mdesc = SysConfig()
294    self.readfile = mdesc.script()
295    self.iobus = NoncoherentBus()
296    self.membus = MemBus()
297    self.bridge = Bridge(delay='50ns')
298    self.mem_ranges = [AddrRange('1GB')]
299    self.bridge.master = self.iobus.slave
300    self.bridge.slave = self.membus.master
301    self.disk0 = CowIdeDisk(driveID='master')
302    self.disk2 = CowIdeDisk(driveID='master')
303    self.disk0.childImage(mdesc.disk())
304    self.disk2.childImage(disk('linux-bigswap2.img'))
305    self.malta = BaseMalta()
306    self.malta.attachIO(self.iobus)
307    self.malta.ide.pio = self.iobus.master
308    self.malta.ide.config = self.iobus.master
309    self.malta.ide.dma = self.iobus.slave
310    self.malta.ethernet.pio = self.iobus.master
311    self.malta.ethernet.config = self.iobus.master
312    self.malta.ethernet.dma = self.iobus.slave
313    self.simple_disk = SimpleDisk(disk=RawDiskImage(image_file = mdesc.disk(),
314                                               read_only = True))
315    self.intrctrl = IntrControl()
316    self.mem_mode = mem_mode
317    self.terminal = Terminal()
318    self.kernel = binary('mips/vmlinux')
319    self.console = binary('mips/console')
320    self.boot_osflags = 'root=/dev/hda1 console=ttyS0'
321
322    self.system_port = self.membus.slave
323
324    return self
325
326def x86IOAddress(port):
327    IO_address_space_base = 0x8000000000000000
328    return IO_address_space_base + port
329
330def connectX86ClassicSystem(x86_sys, numCPUs):
331    # Constants similar to x86_traits.hh
332    IO_address_space_base = 0x8000000000000000
333    pci_config_address_space_base = 0xc000000000000000
334    interrupts_address_space_base = 0xa000000000000000
335    APIC_range_size = 1 << 12;
336
337    x86_sys.membus = MemBus()
338
339    # North Bridge
340    x86_sys.iobus = NoncoherentBus()
341    x86_sys.bridge = Bridge(delay='50ns')
342    x86_sys.bridge.master = x86_sys.iobus.slave
343    x86_sys.bridge.slave = x86_sys.membus.master
344    # Allow the bridge to pass through the IO APIC (two pages),
345    # everything in the IO address range up to the local APIC, and
346    # then the entire PCI address space and beyond
347    x86_sys.bridge.ranges = \
348        [
349        AddrRange(x86_sys.pc.south_bridge.io_apic.pio_addr,
350                  x86_sys.pc.south_bridge.io_apic.pio_addr +
351                  APIC_range_size - 1),
352        AddrRange(IO_address_space_base,
353                  interrupts_address_space_base - 1),
354        AddrRange(pci_config_address_space_base,
355                  Addr.max)
356        ]
357
358    # Create a bridge from the IO bus to the memory bus to allow access to
359    # the local APIC (two pages)
360    x86_sys.apicbridge = Bridge(delay='50ns')
361    x86_sys.apicbridge.slave = x86_sys.iobus.master
362    x86_sys.apicbridge.master = x86_sys.membus.slave
363    x86_sys.apicbridge.ranges = [AddrRange(interrupts_address_space_base,
364                                           interrupts_address_space_base +
365                                           numCPUs * APIC_range_size
366                                           - 1)]
367
368    # connect the io bus
369    x86_sys.pc.attachIO(x86_sys.iobus)
370
371    x86_sys.system_port = x86_sys.membus.slave
372
373def connectX86RubySystem(x86_sys):
374    # North Bridge
375    x86_sys.iobus = NoncoherentBus()
376
377    # add the ide to the list of dma devices that later need to attach to
378    # dma controllers
379    x86_sys._dma_ports = [x86_sys.pc.south_bridge.ide.dma]
380    x86_sys.pc.attachIO(x86_sys.iobus, x86_sys._dma_ports)
381
382
383def makeX86System(mem_mode, numCPUs = 1, mdesc = None, self = None,
384                  Ruby = False):
385    if self == None:
386        self = X86System()
387
388    if not mdesc:
389        # generic system
390        mdesc = SysConfig()
391    self.readfile = mdesc.script()
392
393    self.mem_mode = mem_mode
394
395    # Physical memory
396    # On the PC platform, the memory region 0xC0000000-0xFFFFFFFF is reserved
397    # for various devices.  Hence, if the physical memory size is greater than
398    # 3GB, we need to split it into two parts.
399    excess_mem_size = \
400        convert.toMemorySize(mdesc.mem()) - convert.toMemorySize('3GB')
401    if excess_mem_size <= 0:
402        self.mem_ranges = [AddrRange(mdesc.mem())]
403    else:
404        warn("Physical memory size specified is %s which is greater than " \
405             "3GB.  Twice the number of memory controllers would be " \
406             "created."  % (mdesc.mem()))
407
408        self.mem_ranges = [AddrRange('3GB'),
409            AddrRange(Addr('4GB'), size = excess_mem_size)]
410
411    # Platform
412    self.pc = Pc()
413
414    # Create and connect the busses required by each memory system
415    if Ruby:
416        connectX86RubySystem(self)
417    else:
418        connectX86ClassicSystem(self, numCPUs)
419
420    self.intrctrl = IntrControl()
421
422    # Disks
423    disk0 = CowIdeDisk(driveID='master')
424    disk2 = CowIdeDisk(driveID='master')
425    disk0.childImage(mdesc.disk())
426    disk2.childImage(disk('linux-bigswap2.img'))
427    self.pc.south_bridge.ide.disks = [disk0, disk2]
428
429    # Add in a Bios information structure.
430    structures = [X86SMBiosBiosInformation()]
431    self.smbios_table.structures = structures
432
433    # Set up the Intel MP table
434    base_entries = []
435    ext_entries = []
436    for i in xrange(numCPUs):
437        bp = X86IntelMPProcessor(
438                local_apic_id = i,
439                local_apic_version = 0x14,
440                enable = True,
441                bootstrap = (i == 0))
442        base_entries.append(bp)
443    io_apic = X86IntelMPIOAPIC(
444            id = numCPUs,
445            version = 0x11,
446            enable = True,
447            address = 0xfec00000)
448    self.pc.south_bridge.io_apic.apic_id = io_apic.id
449    base_entries.append(io_apic)
450    isa_bus = X86IntelMPBus(bus_id = 0, bus_type='ISA')
451    base_entries.append(isa_bus)
452    pci_bus = X86IntelMPBus(bus_id = 1, bus_type='PCI')
453    base_entries.append(pci_bus)
454    connect_busses = X86IntelMPBusHierarchy(bus_id=0,
455            subtractive_decode=True, parent_bus=1)
456    ext_entries.append(connect_busses)
457    pci_dev4_inta = X86IntelMPIOIntAssignment(
458            interrupt_type = 'INT',
459            polarity = 'ConformPolarity',
460            trigger = 'ConformTrigger',
461            source_bus_id = 1,
462            source_bus_irq = 0 + (4 << 2),
463            dest_io_apic_id = io_apic.id,
464            dest_io_apic_intin = 16)
465    base_entries.append(pci_dev4_inta)
466    def assignISAInt(irq, apicPin):
467        assign_8259_to_apic = X86IntelMPIOIntAssignment(
468                interrupt_type = 'ExtInt',
469                polarity = 'ConformPolarity',
470                trigger = 'ConformTrigger',
471                source_bus_id = 0,
472                source_bus_irq = irq,
473                dest_io_apic_id = io_apic.id,
474                dest_io_apic_intin = 0)
475        base_entries.append(assign_8259_to_apic)
476        assign_to_apic = X86IntelMPIOIntAssignment(
477                interrupt_type = 'INT',
478                polarity = 'ConformPolarity',
479                trigger = 'ConformTrigger',
480                source_bus_id = 0,
481                source_bus_irq = irq,
482                dest_io_apic_id = io_apic.id,
483                dest_io_apic_intin = apicPin)
484        base_entries.append(assign_to_apic)
485    assignISAInt(0, 2)
486    assignISAInt(1, 1)
487    for i in range(3, 15):
488        assignISAInt(i, i)
489    self.intel_mp_table.base_entries = base_entries
490    self.intel_mp_table.ext_entries = ext_entries
491
492def makeLinuxX86System(mem_mode, numCPUs = 1, mdesc = None,
493                       Ruby = False):
494    self = LinuxX86System()
495
496    # Build up the x86 system and then specialize it for Linux
497    makeX86System(mem_mode, numCPUs, mdesc, self, Ruby)
498
499    # We assume below that there's at least 1MB of memory. We'll require 2
500    # just to avoid corner cases.
501    phys_mem_size = sum(map(lambda r: r.size(), self.mem_ranges))
502    assert(phys_mem_size >= 0x200000)
503    assert(len(self.mem_ranges) <= 2)
504
505    entries = \
506       [
507        # Mark the first megabyte of memory as reserved
508        X86E820Entry(addr = 0, size = '639kB', range_type = 1),
509        X86E820Entry(addr = 0x9fc00, size = '385kB', range_type = 2),
510        # Mark the rest of physical memory as available
511        X86E820Entry(addr = 0x100000,
512                size = '%dB' % (self.mem_ranges[0].size() - 0x100000),
513                range_type = 1),
514        # Reserve the last 16kB of the 32-bit address space for the
515        # m5op interface
516        X86E820Entry(addr=0xFFFF0000, size='64kB', range_type=2),
517        ]
518
519    # In case the physical memory is greater than 3GB, we split it into two
520    # parts and add a separate e820 entry for the second part.  This entry
521    # starts at 0x100000000,  which is the first address after the space
522    # reserved for devices.
523    if len(self.mem_ranges) == 2:
524        entries.append(X86E820Entry(addr = 0x100000000,
525            size = '%dB' % (self.mem_ranges[1].size()), range_type = 1))
526
527    self.e820_table.entries = entries
528
529    # Command line
530    self.boot_osflags = 'earlyprintk=ttyS0 console=ttyS0 lpj=7999923 ' + \
531                        'root=/dev/hda1'
532    self.kernel = binary('x86_64-vmlinux-2.6.22.9')
533    return self
534
535
536def makeDualRoot(full_system, testSystem, driveSystem, dumpfile):
537    self = Root(full_system = full_system)
538    self.testsys = testSystem
539    self.drivesys = driveSystem
540    self.etherlink = EtherLink()
541
542    if hasattr(testSystem, 'realview'):
543        self.etherlink.int0 = Parent.testsys.realview.ethernet.interface
544        self.etherlink.int1 = Parent.drivesys.realview.ethernet.interface
545    elif hasattr(testSystem, 'tsunami'):
546        self.etherlink.int0 = Parent.testsys.tsunami.ethernet.interface
547        self.etherlink.int1 = Parent.drivesys.tsunami.ethernet.interface
548    else:
549        fatal("Don't know how to connect these system together")
550
551    if dumpfile:
552        self.etherdump = EtherDump(file=dumpfile)
553        self.etherlink.dump = Parent.etherdump
554
555    return self
556