RubyPort.cc revision 11025:4872dbdea907
1/* 2 * Copyright (c) 2012-2013 ARM Limited 3 * All rights reserved. 4 * 5 * The license below extends only to copyright in the software and shall 6 * not be construed as granting a license to any other intellectual 7 * property including but not limited to intellectual property relating 8 * to a hardware implementation of the functionality of the software 9 * licensed hereunder. You may use the software subject to the license 10 * terms below provided that you ensure that this notice is replicated 11 * unmodified and in its entirety in all distributions of the software, 12 * modified or unmodified, in source code or in binary form. 13 * 14 * Copyright (c) 2009 Advanced Micro Devices, Inc. 15 * Copyright (c) 2011 Mark D. Hill and David A. Wood 16 * All rights reserved. 17 * 18 * Redistribution and use in source and binary forms, with or without 19 * modification, are permitted provided that the following conditions are 20 * met: redistributions of source code must retain the above copyright 21 * notice, this list of conditions and the following disclaimer; 22 * redistributions in binary form must reproduce the above copyright 23 * notice, this list of conditions and the following disclaimer in the 24 * documentation and/or other materials provided with the distribution; 25 * neither the name of the copyright holders nor the names of its 26 * contributors may be used to endorse or promote products derived from 27 * this software without specific prior written permission. 28 * 29 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 30 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 31 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 32 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 33 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 34 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 35 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 36 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 37 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 38 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 39 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 40 */ 41 42#include "cpu/testers/rubytest/RubyTester.hh" 43#include "debug/Config.hh" 44#include "debug/Drain.hh" 45#include "debug/Ruby.hh" 46#include "mem/protocol/AccessPermission.hh" 47#include "mem/ruby/slicc_interface/AbstractController.hh" 48#include "mem/ruby/system/RubyPort.hh" 49#include "mem/simple_mem.hh" 50#include "sim/full_system.hh" 51#include "sim/system.hh" 52 53RubyPort::RubyPort(const Params *p) 54 : MemObject(p), m_ruby_system(p->ruby_system), m_version(p->version), 55 m_controller(NULL), m_mandatory_q_ptr(NULL), 56 m_usingRubyTester(p->using_ruby_tester), system(p->system), 57 pioMasterPort(csprintf("%s.pio-master-port", name()), this), 58 pioSlavePort(csprintf("%s.pio-slave-port", name()), this), 59 memMasterPort(csprintf("%s.mem-master-port", name()), this), 60 memSlavePort(csprintf("%s-mem-slave-port", name()), this, 61 p->ruby_system->getAccessBackingStore(), -1), 62 gotAddrRanges(p->port_master_connection_count) 63{ 64 assert(m_version != -1); 65 66 // create the slave ports based on the number of connected ports 67 for (size_t i = 0; i < p->port_slave_connection_count; ++i) { 68 slave_ports.push_back(new MemSlavePort(csprintf("%s.slave%d", name(), 69 i), this, p->ruby_system->getAccessBackingStore(), i)); 70 } 71 72 // create the master ports based on the number of connected ports 73 for (size_t i = 0; i < p->port_master_connection_count; ++i) { 74 master_ports.push_back(new PioMasterPort(csprintf("%s.master%d", 75 name(), i), this)); 76 } 77} 78 79void 80RubyPort::init() 81{ 82 assert(m_controller != NULL); 83 m_mandatory_q_ptr = m_controller->getMandatoryQueue(); 84 m_mandatory_q_ptr->setSender(this); 85} 86 87BaseMasterPort & 88RubyPort::getMasterPort(const std::string &if_name, PortID idx) 89{ 90 if (if_name == "mem_master_port") { 91 return memMasterPort; 92 } 93 94 if (if_name == "pio_master_port") { 95 return pioMasterPort; 96 } 97 98 // used by the x86 CPUs to connect the interrupt PIO and interrupt slave 99 // port 100 if (if_name != "master") { 101 // pass it along to our super class 102 return MemObject::getMasterPort(if_name, idx); 103 } else { 104 if (idx >= static_cast<PortID>(master_ports.size())) { 105 panic("RubyPort::getMasterPort: unknown index %d\n", idx); 106 } 107 108 return *master_ports[idx]; 109 } 110} 111 112BaseSlavePort & 113RubyPort::getSlavePort(const std::string &if_name, PortID idx) 114{ 115 if (if_name == "mem_slave_port") { 116 return memSlavePort; 117 } 118 119 if (if_name == "pio_slave_port") 120 return pioSlavePort; 121 122 // used by the CPUs to connect the caches to the interconnect, and 123 // for the x86 case also the interrupt master 124 if (if_name != "slave") { 125 // pass it along to our super class 126 return MemObject::getSlavePort(if_name, idx); 127 } else { 128 if (idx >= static_cast<PortID>(slave_ports.size())) { 129 panic("RubyPort::getSlavePort: unknown index %d\n", idx); 130 } 131 132 return *slave_ports[idx]; 133 } 134} 135 136RubyPort::PioMasterPort::PioMasterPort(const std::string &_name, 137 RubyPort *_port) 138 : QueuedMasterPort(_name, _port, reqQueue, snoopRespQueue), 139 reqQueue(*_port, *this), snoopRespQueue(*_port, *this) 140{ 141 DPRINTF(RubyPort, "Created master pioport on sequencer %s\n", _name); 142} 143 144RubyPort::PioSlavePort::PioSlavePort(const std::string &_name, 145 RubyPort *_port) 146 : QueuedSlavePort(_name, _port, queue), queue(*_port, *this) 147{ 148 DPRINTF(RubyPort, "Created slave pioport on sequencer %s\n", _name); 149} 150 151RubyPort::MemMasterPort::MemMasterPort(const std::string &_name, 152 RubyPort *_port) 153 : QueuedMasterPort(_name, _port, reqQueue, snoopRespQueue), 154 reqQueue(*_port, *this), snoopRespQueue(*_port, *this) 155{ 156 DPRINTF(RubyPort, "Created master memport on ruby sequencer %s\n", _name); 157} 158 159RubyPort::MemSlavePort::MemSlavePort(const std::string &_name, RubyPort *_port, 160 bool _access_backing_store, PortID id) 161 : QueuedSlavePort(_name, _port, queue, id), queue(*_port, *this), 162 access_backing_store(_access_backing_store) 163{ 164 DPRINTF(RubyPort, "Created slave memport on ruby sequencer %s\n", _name); 165} 166 167bool 168RubyPort::PioMasterPort::recvTimingResp(PacketPtr pkt) 169{ 170 RubyPort *rp = static_cast<RubyPort *>(&owner); 171 DPRINTF(RubyPort, "Response for address: 0x%#x\n", pkt->getAddr()); 172 173 // send next cycle 174 rp->pioSlavePort.schedTimingResp( 175 pkt, curTick() + rp->m_ruby_system->clockPeriod()); 176 return true; 177} 178 179bool RubyPort::MemMasterPort::recvTimingResp(PacketPtr pkt) 180{ 181 // got a response from a device 182 assert(pkt->isResponse()); 183 184 // First we must retrieve the request port from the sender State 185 RubyPort::SenderState *senderState = 186 safe_cast<RubyPort::SenderState *>(pkt->popSenderState()); 187 MemSlavePort *port = senderState->port; 188 assert(port != NULL); 189 delete senderState; 190 191 // In FS mode, ruby memory will receive pio responses from devices 192 // and it must forward these responses back to the particular CPU. 193 DPRINTF(RubyPort, "Pio response for address %#x, going to %s\n", 194 pkt->getAddr(), port->name()); 195 196 // attempt to send the response in the next cycle 197 RubyPort *rp = static_cast<RubyPort *>(&owner); 198 port->schedTimingResp(pkt, curTick() + rp->m_ruby_system->clockPeriod()); 199 200 return true; 201} 202 203bool 204RubyPort::PioSlavePort::recvTimingReq(PacketPtr pkt) 205{ 206 RubyPort *ruby_port = static_cast<RubyPort *>(&owner); 207 208 for (size_t i = 0; i < ruby_port->master_ports.size(); ++i) { 209 AddrRangeList l = ruby_port->master_ports[i]->getAddrRanges(); 210 for (auto it = l.begin(); it != l.end(); ++it) { 211 if (it->contains(pkt->getAddr())) { 212 // generally it is not safe to assume success here as 213 // the port could be blocked 214 bool M5_VAR_USED success = 215 ruby_port->master_ports[i]->sendTimingReq(pkt); 216 assert(success); 217 return true; 218 } 219 } 220 } 221 panic("Should never reach here!\n"); 222} 223 224bool 225RubyPort::MemSlavePort::recvTimingReq(PacketPtr pkt) 226{ 227 DPRINTF(RubyPort, "Timing request for address %#x on port %d\n", 228 pkt->getAddr(), id); 229 RubyPort *ruby_port = static_cast<RubyPort *>(&owner); 230 231 if (pkt->memInhibitAsserted()) 232 panic("RubyPort should never see an inhibited request\n"); 233 234 // Check for pio requests and directly send them to the dedicated 235 // pio port. 236 if (!isPhysMemAddress(pkt->getAddr())) { 237 assert(ruby_port->memMasterPort.isConnected()); 238 DPRINTF(RubyPort, "Request address %#x assumed to be a pio address\n", 239 pkt->getAddr()); 240 241 // Save the port in the sender state object to be used later to 242 // route the response 243 pkt->pushSenderState(new SenderState(this)); 244 245 // send next cycle 246 RubySystem *rs = ruby_port->m_ruby_system; 247 ruby_port->memMasterPort.schedTimingReq(pkt, 248 curTick() + rs->clockPeriod()); 249 return true; 250 } 251 252 assert(getOffset(pkt->getAddr()) + pkt->getSize() <= 253 RubySystem::getBlockSizeBytes()); 254 255 // Submit the ruby request 256 RequestStatus requestStatus = ruby_port->makeRequest(pkt); 257 258 // If the request successfully issued then we should return true. 259 // Otherwise, we need to tell the port to retry at a later point 260 // and return false. 261 if (requestStatus == RequestStatus_Issued) { 262 // Save the port in the sender state object to be used later to 263 // route the response 264 pkt->pushSenderState(new SenderState(this)); 265 266 DPRINTF(RubyPort, "Request %s 0x%x issued\n", pkt->cmdString(), 267 pkt->getAddr()); 268 return true; 269 } 270 271 // 272 // Unless one is using the ruby tester, record the stalled M5 port for 273 // later retry when the sequencer becomes free. 274 // 275 if (!ruby_port->m_usingRubyTester) { 276 ruby_port->addToRetryList(this); 277 } 278 279 DPRINTF(RubyPort, "Request for address %#x did not issued because %s\n", 280 pkt->getAddr(), RequestStatus_to_string(requestStatus)); 281 282 return false; 283} 284 285void 286RubyPort::MemSlavePort::recvFunctional(PacketPtr pkt) 287{ 288 DPRINTF(RubyPort, "Functional access for address: %#x\n", pkt->getAddr()); 289 290 RubyPort *rp M5_VAR_USED = static_cast<RubyPort *>(&owner); 291 RubySystem *rs = rp->m_ruby_system; 292 293 // Check for pio requests and directly send them to the dedicated 294 // pio port. 295 if (!isPhysMemAddress(pkt->getAddr())) { 296 assert(rp->memMasterPort.isConnected()); 297 DPRINTF(RubyPort, "Pio Request for address: 0x%#x\n", pkt->getAddr()); 298 panic("RubyPort::PioMasterPort::recvFunctional() not implemented!\n"); 299 } 300 301 assert(pkt->getAddr() + pkt->getSize() <= 302 makeLineAddress(pkt->getAddr()) + RubySystem::getBlockSizeBytes()); 303 304 if (access_backing_store) { 305 // The attached physmem contains the official version of data. 306 // The following command performs the real functional access. 307 // This line should be removed once Ruby supplies the official version 308 // of data. 309 rs->getPhysMem()->functionalAccess(pkt); 310 } else { 311 bool accessSucceeded = false; 312 bool needsResponse = pkt->needsResponse(); 313 314 // Do the functional access on ruby memory 315 if (pkt->isRead()) { 316 accessSucceeded = rs->functionalRead(pkt); 317 } else if (pkt->isWrite()) { 318 accessSucceeded = rs->functionalWrite(pkt); 319 } else { 320 panic("Unsupported functional command %s\n", pkt->cmdString()); 321 } 322 323 // Unless the requester explicitly said otherwise, generate an error if 324 // the functional request failed 325 if (!accessSucceeded && !pkt->suppressFuncError()) { 326 fatal("Ruby functional %s failed for address %#x\n", 327 pkt->isWrite() ? "write" : "read", pkt->getAddr()); 328 } 329 330 // turn packet around to go back to requester if response expected 331 if (needsResponse) { 332 pkt->setFunctionalResponseStatus(accessSucceeded); 333 } 334 335 DPRINTF(RubyPort, "Functional access %s!\n", 336 accessSucceeded ? "successful":"failed"); 337 } 338} 339 340void 341RubyPort::ruby_hit_callback(PacketPtr pkt) 342{ 343 DPRINTF(RubyPort, "Hit callback for %s 0x%x\n", pkt->cmdString(), 344 pkt->getAddr()); 345 346 // The packet was destined for memory and has not yet been turned 347 // into a response 348 assert(system->isMemAddr(pkt->getAddr())); 349 assert(pkt->isRequest()); 350 351 // First we must retrieve the request port from the sender State 352 RubyPort::SenderState *senderState = 353 safe_cast<RubyPort::SenderState *>(pkt->popSenderState()); 354 MemSlavePort *port = senderState->port; 355 assert(port != NULL); 356 delete senderState; 357 358 port->hitCallback(pkt); 359 360 // 361 // If we had to stall the MemSlavePorts, wake them up because the sequencer 362 // likely has free resources now. 363 // 364 if (!retryList.empty()) { 365 // 366 // Record the current list of ports to retry on a temporary list before 367 // calling sendRetry on those ports. sendRetry will cause an 368 // immediate retry, which may result in the ports being put back on the 369 // list. Therefore we want to clear the retryList before calling 370 // sendRetry. 371 // 372 std::vector<MemSlavePort *> curRetryList(retryList); 373 374 retryList.clear(); 375 376 for (auto i = curRetryList.begin(); i != curRetryList.end(); ++i) { 377 DPRINTF(RubyPort, 378 "Sequencer may now be free. SendRetry to port %s\n", 379 (*i)->name()); 380 (*i)->sendRetryReq(); 381 } 382 } 383 384 testDrainComplete(); 385} 386 387void 388RubyPort::testDrainComplete() 389{ 390 //If we weren't able to drain before, we might be able to now. 391 if (drainState() == DrainState::Draining) { 392 unsigned int drainCount = outstandingCount(); 393 DPRINTF(Drain, "Drain count: %u\n", drainCount); 394 if (drainCount == 0) { 395 DPRINTF(Drain, "RubyPort done draining, signaling drain done\n"); 396 signalDrainDone(); 397 } 398 } 399} 400 401DrainState 402RubyPort::drain() 403{ 404 if (isDeadlockEventScheduled()) { 405 descheduleDeadlockEvent(); 406 } 407 408 // 409 // If the RubyPort is not empty, then it needs to clear all outstanding 410 // requests before it should call signalDrainDone() 411 // 412 DPRINTF(Config, "outstanding count %d\n", outstandingCount()); 413 if (outstandingCount() > 0) { 414 DPRINTF(Drain, "RubyPort not drained\n"); 415 return DrainState::Draining; 416 } else { 417 return DrainState::Drained; 418 } 419} 420 421void 422RubyPort::MemSlavePort::hitCallback(PacketPtr pkt) 423{ 424 bool needsResponse = pkt->needsResponse(); 425 426 // Unless specified at configuraiton, all responses except failed SC 427 // and Flush operations access M5 physical memory. 428 bool accessPhysMem = access_backing_store; 429 430 if (pkt->isLLSC()) { 431 if (pkt->isWrite()) { 432 if (pkt->req->getExtraData() != 0) { 433 // 434 // Successful SC packets convert to normal writes 435 // 436 pkt->convertScToWrite(); 437 } else { 438 // 439 // Failed SC packets don't access physical memory and thus 440 // the RubyPort itself must convert it to a response. 441 // 442 accessPhysMem = false; 443 } 444 } else { 445 // 446 // All LL packets convert to normal loads so that M5 PhysMem does 447 // not lock the blocks. 448 // 449 pkt->convertLlToRead(); 450 } 451 } 452 453 // Flush requests don't access physical memory 454 if (pkt->isFlush()) { 455 accessPhysMem = false; 456 } 457 458 DPRINTF(RubyPort, "Hit callback needs response %d\n", needsResponse); 459 460 RubyPort *ruby_port = static_cast<RubyPort *>(&owner); 461 RubySystem *rs = ruby_port->m_ruby_system; 462 if (accessPhysMem) { 463 rs->getPhysMem()->access(pkt); 464 } else if (needsResponse) { 465 pkt->makeResponse(); 466 } 467 468 // turn packet around to go back to requester if response expected 469 if (needsResponse) { 470 DPRINTF(RubyPort, "Sending packet back over port\n"); 471 // Send a response in the same cycle. There is no need to delay the 472 // response because the response latency is already incurred in the 473 // Ruby protocol. 474 schedTimingResp(pkt, curTick()); 475 } else { 476 delete pkt; 477 } 478 479 DPRINTF(RubyPort, "Hit callback done!\n"); 480} 481 482AddrRangeList 483RubyPort::PioSlavePort::getAddrRanges() const 484{ 485 // at the moment the assumption is that the master does not care 486 AddrRangeList ranges; 487 RubyPort *ruby_port = static_cast<RubyPort *>(&owner); 488 489 for (size_t i = 0; i < ruby_port->master_ports.size(); ++i) { 490 ranges.splice(ranges.begin(), 491 ruby_port->master_ports[i]->getAddrRanges()); 492 } 493 for (const auto M5_VAR_USED &r : ranges) 494 DPRINTF(RubyPort, "%s\n", r.to_string()); 495 return ranges; 496} 497 498bool 499RubyPort::MemSlavePort::isPhysMemAddress(Addr addr) const 500{ 501 RubyPort *ruby_port = static_cast<RubyPort *>(&owner); 502 return ruby_port->system->isMemAddr(addr); 503} 504 505void 506RubyPort::ruby_eviction_callback(Addr address) 507{ 508 DPRINTF(RubyPort, "Sending invalidations.\n"); 509 // This request is deleted in the stack-allocated packet destructor 510 // when this function exits 511 // TODO: should this really be using funcMasterId? 512 RequestPtr req = new Request(address, 0, 0, Request::funcMasterId); 513 // Use a single packet to signal all snooping ports of the invalidation. 514 // This assumes that snooping ports do NOT modify the packet/request 515 Packet pkt(req, MemCmd::InvalidateReq); 516 for (CpuPortIter p = slave_ports.begin(); p != slave_ports.end(); ++p) { 517 // check if the connected master port is snooping 518 if ((*p)->isSnooping()) { 519 // send as a snoop request 520 (*p)->sendTimingSnoopReq(&pkt); 521 } 522 } 523} 524 525void 526RubyPort::PioMasterPort::recvRangeChange() 527{ 528 RubyPort &r = static_cast<RubyPort &>(owner); 529 r.gotAddrRanges--; 530 if (r.gotAddrRanges == 0 && FullSystem) { 531 r.pioSlavePort.sendRangeChange(); 532 } 533} 534