1/*
2 * Copyright (c) 1999-2008 Mark D. Hill and David A. Wood
3 * Copyright (c) 2013 Advanced Micro Devices, Inc.
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are
8 * met: redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer;
10 * redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution;
13 * neither the name of the copyright holders nor the names of its
14 * contributors may be used to endorse or promote products derived from
15 * this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
20 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
21 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
23 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 */
29
30/*
31 * These are the functions that exported to slicc from ruby.
32 */
33
34#ifndef __MEM_RUBY_SLICC_INTERFACE_RUBYSLICC_UTIL_HH__
35#define __MEM_RUBY_SLICC_INTERFACE_RUBYSLICC_UTIL_HH__
36
37#include <cassert>
38
39#include "debug/RubySlicc.hh"
40#include "mem/packet.hh"
41#include "mem/ruby/common/Address.hh"
42#include "mem/ruby/common/BoolVec.hh"
43#include "mem/ruby/common/DataBlock.hh"
44#include "mem/ruby/common/TypeDefines.hh"
45#include "mem/ruby/common/WriteMask.hh"
46
47inline Cycles zero_time() { return Cycles(0); }
48
49inline NodeID
50intToID(int nodenum)
51{
52    NodeID id = nodenum;
53    return id;
54}
55
56inline int
57IDToInt(NodeID id)
58{
59    int nodenum = id;
60    return nodenum;
61}
62
63inline int
64addressToInt(Addr addr)
65{
66    assert(!(addr & 0xffffffff00000000));
67    return addr;
68}
69
70inline Addr
71intToAddress(int addr)
72{
73    assert(!(addr & 0xffffffff00000000));
74    return addr;
75}
76
77inline int
78mod(int val, int mod)
79{
80    return val % mod;
81}
82
83inline int max_tokens()
84{
85  return 1024;
86}
87
88/**
89 * This function accepts an address, a data block and a packet. If the address
90 * range for the data block contains the address which the packet needs to
91 * read, then the data from the data block is written to the packet. True is
92 * returned if the data block was read, otherwise false is returned.
93 *
94 * This is used during a functional access "search the world" operation. The
95 * functional access looks in every place that might hold a valid data block
96 * and, if it finds one, checks to see if it is holding the address the access
97 * is searching for. During the access check, the WriteMask could be in any
98 * state, including empty.
99 */
100inline bool
101testAndRead(Addr addr, DataBlock& blk, Packet *pkt)
102{
103    Addr pktLineAddr = makeLineAddress(pkt->getAddr());
104    Addr lineAddr = makeLineAddress(addr);
105
106    if (pktLineAddr == lineAddr) {
107        uint8_t *data = pkt->getPtr<uint8_t>();
108        unsigned int size_in_bytes = pkt->getSize();
109        unsigned startByte = pkt->getAddr() - lineAddr;
110
111        for (unsigned i = 0; i < size_in_bytes; ++i) {
112            data[i] = blk.getByte(i + startByte);
113        }
114        return true;
115    }
116    return false;
117}
118
119/**
120 * This function accepts an address, a data block, a write mask and a packet.
121 * If the valid address range for the data block contains the address which
122 * the packet needs to read, then the data from the data block is written to
123 * the packet. True is returned if any part of the data block was read,
124 * otherwise false is returned.
125 */
126inline bool
127testAndReadMask(Addr addr, DataBlock& blk, WriteMask& mask, Packet *pkt)
128{
129    Addr pktLineAddr = makeLineAddress(pkt->getAddr());
130    Addr lineAddr = makeLineAddress(addr);
131
132    if (pktLineAddr == lineAddr) {
133        uint8_t *data = pkt->getPtr<uint8_t>();
134        unsigned int size_in_bytes = pkt->getSize();
135        unsigned startByte = pkt->getAddr() - lineAddr;
136        bool was_read = false;
137
138        for (unsigned i = 0; i < size_in_bytes; ++i) {
139            if (mask.test(i + startByte)) {
140                was_read = true;
141                data[i] = blk.getByte(i + startByte);
142            }
143        }
144        return was_read;
145    }
146    return false;
147}
148
149/**
150 * This function accepts an address, a data block and a packet. If the address
151 * range for the data block contains the address which the packet needs to
152 * write, then the data from the packet is written to the data block. True is
153 * returned if the data block was written, otherwise false is returned.
154 */
155inline bool
156testAndWrite(Addr addr, DataBlock& blk, Packet *pkt)
157{
158    Addr pktLineAddr = makeLineAddress(pkt->getAddr());
159    Addr lineAddr = makeLineAddress(addr);
160
161    if (pktLineAddr == lineAddr) {
162        const uint8_t *data = pkt->getConstPtr<uint8_t>();
163        unsigned int size_in_bytes = pkt->getSize();
164        unsigned startByte = pkt->getAddr() - lineAddr;
165
166        for (unsigned i = 0; i < size_in_bytes; ++i) {
167            blk.setByte(i + startByte, data[i]);
168        }
169        return true;
170    }
171    return false;
172}
173
174inline int
175countBoolVec(BoolVec bVec)
176{
177    int count = 0;
178    for (const auto &it: bVec) {
179        if (it) {
180            count++;
181        }
182    }
183    return count;
184}
185
186#endif //__MEM_RUBY_SLICC_INTERFACE_RUBYSLICC_UTIL_HH__
187