xref: /gem5/src/arch/arm/isa/insts/macromem.isa

// -*- mode:c++ -*-

// Copyright (c) 2007-2008 The Florida State University
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met: redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer;
// redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution;
// neither the name of the copyright holders nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Authors: Stephen Hines

////////////////////////////////////////////////////////////////////
//
// Macro Memory-format instructions
//

output header {{

    /**
     * Arm Macro Memory operations like LDM/STM
     */
    class ArmMacroMemoryOp : public PredMacroOp
    {
        protected:
        /// Memory request flags.  See mem_req_base.hh.
        unsigned memAccessFlags;
        /// Pointer to EAComp object.
        const StaticInstPtr eaCompPtr;
        /// Pointer to MemAcc object.
        const StaticInstPtr memAccPtr;

        uint32_t reglist;
        uint32_t ones;
        uint32_t puswl,
                 prepost,
                 up,
                 psruser,
                 writeback,
                 loadop;

        ArmMacroMemoryOp(const char *mnem, MachInst _machInst, OpClass __opClass,
                     StaticInstPtr _eaCompPtr = nullStaticInstPtr,
                     StaticInstPtr _memAccPtr = nullStaticInstPtr)
            : PredMacroOp(mnem, _machInst, __opClass),
            memAccessFlags(0), eaCompPtr(_eaCompPtr), memAccPtr(_memAccPtr),
            reglist(REGLIST), ones(0), puswl(PUSWL), prepost(PREPOST), up(UP),
            psruser(PSRUSER), writeback(WRITEBACK), loadop(LOADOP)
        {
            ones = number_of_ones(reglist);
            numMicroops = ones + writeback + 1;
            // Remember that writeback adds a uop
            microOps = new StaticInstPtr[numMicroops];
        }
    };

    /**
     * Arm Macro FPA operations to fix ldfd and stfd instructions
     */
    class ArmMacroFPAOp : public PredMacroOp
    {
        protected:
        uint32_t puswl,
                 prepost,
                 up,
                 psruser,
                 writeback,
                 loadop;
        int32_t disp8;

        ArmMacroFPAOp(const char *mnem, MachInst _machInst, OpClass __opClass)
            : PredMacroOp(mnem, _machInst, __opClass),
            puswl(PUSWL), prepost(PREPOST), up(UP),
            psruser(PSRUSER), writeback(WRITEBACK), loadop(LOADOP),
            disp8(IMMED_7_0 << 2)
        {
            numMicroops = 3 + writeback;
            microOps = new StaticInstPtr[numMicroops];
        }
    };

    /**
     * Arm Macro FM operations to fix lfm and sfm
     */
    class ArmMacroFMOp : public PredMacroOp
    {
        protected:
        uint32_t punwl,
                 prepost,
                 up,
                 n1bit,
                 writeback,
                 loadop,
                 n0bit,
                 count;
        int32_t disp8;

        ArmMacroFMOp(const char *mnem, MachInst _machInst, OpClass __opClass)
            : PredMacroOp(mnem, _machInst, __opClass),
            punwl(PUNWL), prepost(PREPOST), up(UP),
            n1bit(OPCODE_22), writeback(WRITEBACK), loadop(LOADOP),
            n0bit(OPCODE_15), disp8(IMMED_7_0 << 2)
        {
            // Transfer 1-4 registers based on n1 and n0 bits (with 00 repr. 4)
            count = (n1bit << 1) | n0bit;
            if (count == 0)
                count = 4;
            numMicroops = (3*count) + writeback;
            microOps = new StaticInstPtr[numMicroops];
        }
    };


}};


output decoder {{
}};

def template MacroStoreDeclare {{
    /**
     * Static instructions class for a store multiple instruction
     */
    class %(class_name)s : public %(base_class)s
    {
        public:
            // Constructor
            %(class_name)s(MachInst machInst);
            %(BasicExecDeclare)s
    };
}};

def template MacroStoreConstructor {{
    inline %(class_name)s::%(class_name)s(MachInst machInst)
        : %(base_class)s("%(mnemonic)s", machInst, %(op_class)s)
    {
        %(constructor)s;
        uint32_t regs_to_handle = reglist;
        uint32_t j = 0,
                 start_addr = 0,
                 end_addr = 0;

        switch (puswl)
        {
            case 0x01: //     L ldmda_l
                start_addr = (ones << 2) - 4;
                end_addr = 0;
                break;
            case 0x03: //    WL ldmda_wl
                start_addr = (ones << 2) - 4;
                end_addr = 0;
                break;
            case 0x08: //  U    stmia_u
                start_addr = 0;
                end_addr = (ones << 2) - 4;
                break;
            case 0x09: //  U  L ldmia_ul
                start_addr = 0;
                end_addr = (ones << 2) - 4;
                break;
            case 0x0b: //  U WL ldmia
                start_addr = 0;
                end_addr = (ones << 2) - 4;
                break;
            case 0x11: // P   L ldmdb
                start_addr = (ones << 2); // U-bit is already 0 for subtract
                end_addr = 4; // negative 4
                break;
            case 0x12: // P  W  stmdb
                start_addr = (ones << 2); // U-bit is already 0 for subtract
                end_addr = 4; // negative 4
                break;
            case 0x18: // PU    stmib
                start_addr = 4;
                end_addr = (ones << 2) + 4;
                break;
            case 0x19: // PU  L ldmib
                start_addr = 4;
                end_addr = (ones << 2) + 4;
                break;
            default:
                panic("Unhandled Load/Store Multiple Instruction");
                break;
        }

        //TODO - Add addi_uop/subi_uop here to create starting addresses
        //Just using addi with 0 offset makes a "copy" of Rn for our use
        uint32_t newMachInst = 0;
        newMachInst = machInst & 0xffff0000;
        microOps[0] = new Addi_uop(newMachInst);

        for (int i = 1; i < ones+1; i++)
        {
            // Get next available bit for transfer
            while (! ( regs_to_handle & (1<<j)))
                j++;
            regs_to_handle &= ~(1<<j);

            microOps[i] = gen_ldrstr_uop(machInst, loadop, j, start_addr);

            if (up)
                start_addr += 4;
            else
                start_addr -= 4;
        }

        /* TODO: Take a look at how these 2 values should meet together
        if (start_addr != (end_addr - 4))
        {
            fprintf(stderr, "start_addr: %d\n", start_addr);
            fprintf(stderr, "end_addr:   %d\n", end_addr);
            panic("start_addr does not meet end_addr");
        }
        */

        if (writeback)
        {
            uint32_t newMachInst = machInst & 0xf0000000;
            uint32_t rn = (machInst >> 16) & 0x0f;
            // 3322 2222 2222 1111 1111 11
            // 1098 7654 3210 9876 5432 1098 7654 3210
            // COND 0010 0100 [RN] [RD] 0000 [  IMM  ]
            // sub rn, rn, imm
            newMachInst |= 0x02400000;
            newMachInst |= ((rn << 16) | (rn << 12));
            newMachInst |= (ones << 2);
            if (up)
            {
                microOps[numMicroops-1] = new Addi_rd_uop(newMachInst);
            }
            else
            {
                microOps[numMicroops-1] = new Subi_rd_uop(newMachInst);
            }
        }
        microOps[numMicroops-1]->setLastMicroop();
    }

}};

def template MacroStoreExecute {{
    Fault %(class_name)s::execute(%(CPU_exec_context)s *xc, Trace::InstRecord *traceData) const
    {
        Fault fault = NoFault;

        %(fp_enable_check)s;
        %(op_decl)s;
        %(op_rd)s;
        %(code)s;
        if (fault == NoFault)
        {
            %(op_wb)s;
        }

        return fault;
    }
}};

def template MacroFPAConstructor {{
    inline %(class_name)s::%(class_name)s(MachInst machInst)
        : %(base_class)s("%(mnemonic)s", machInst, %(op_class)s)
    {
        %(constructor)s;

        uint32_t start_addr = 0;

        if (prepost)
            start_addr = disp8;
        else
            start_addr = 0;

        emit_ldfstf_uops(microOps, 0, machInst, loadop, up, start_addr);

        if (writeback)
        {
            uint32_t newMachInst = machInst & 0xf0000000;
            uint32_t rn = (machInst >> 16) & 0x0f;
            // 3322 2222 2222 1111 1111 11
            // 1098 7654 3210 9876 5432 1098 7654 3210
            // COND 0010 0100 [RN] [RD] 0000 [  IMM  ]
            // sub rn, rn, imm
            newMachInst |= 0x02400000;
            newMachInst |= ((rn << 16) | (rn << 12));
            if (up)
            {
                newMachInst |= disp8;
                microOps[numMicroops-1] = new Addi_rd_uop(newMachInst);
            }
            else
            {
                newMachInst |= disp8;
                microOps[numMicroops-1] = new Subi_rd_uop(newMachInst);
            }
        }
        microOps[numMicroops-1]->setLastMicroop();
    }

}};


def template MacroFMConstructor {{
    inline %(class_name)s::%(class_name)s(MachInst machInst)
        : %(base_class)s("%(mnemonic)s", machInst, %(op_class)s)
    {
        %(constructor)s;

        uint32_t start_addr = 0;

        if (prepost)
            start_addr = disp8;
        else
            start_addr = 0;

        for (int i = 0; i < count; i++)
        {
            emit_ldfstf_uops(microOps, 3*i, machInst, loadop, up, start_addr);
        }

        if (writeback)
        {
            uint32_t newMachInst = machInst & 0xf0000000;
            uint32_t rn = (machInst >> 16) & 0x0f;
            // 3322 2222 2222 1111 1111 11
            // 1098 7654 3210 9876 5432 1098 7654 3210
            // COND 0010 0100 [RN] [RD] 0000 [  IMM  ]
            // sub rn, rn, imm
            newMachInst |= 0x02400000;
            newMachInst |= ((rn << 16) | (rn << 12));
            if (up)
            {
                newMachInst |= disp8;
                microOps[numMicroops-1] = new Addi_rd_uop(newMachInst);
            }
            else
            {
                newMachInst |= disp8;
                microOps[numMicroops-1] = new Subi_rd_uop(newMachInst);
            }
        }
        microOps[numMicroops-1]->setLastMicroop();
    }

}};


def format ArmMacroStore(code, mem_flags = [], inst_flag = [], *opt_flags) {{
    iop = InstObjParams(name, Name, 'ArmMacroMemoryOp', code, opt_flags)
    header_output = MacroStoreDeclare.subst(iop)
    decoder_output = MacroStoreConstructor.subst(iop)
    decode_block = BasicDecode.subst(iop)
    exec_output = MacroStoreExecute.subst(iop)
}};

def format ArmMacroFPAOp(code, mem_flags = [], inst_flag = [], *opt_flags) {{
    iop = InstObjParams(name, Name, 'ArmMacroFPAOp', code, opt_flags)
    header_output = BasicDeclare.subst(iop)
    decoder_output = MacroFPAConstructor.subst(iop)
    decode_block = BasicDecode.subst(iop)
    exec_output = PredOpExecute.subst(iop)
}};

def format ArmMacroFMOp(code, mem_flags = [], inst_flag = [], *opt_flags) {{
    iop = InstObjParams(name, Name, 'ArmMacroFMOp', code, opt_flags)
    header_output = BasicDeclare.subst(iop)
    decoder_output = MacroFMConstructor.subst(iop)
    decode_block = BasicDecode.subst(iop)
    exec_output = PredOpExecute.subst(iop)
}};