xref: /gem5/ext/dsent/model/std_cells/AND2.cc

#include "model/std_cells/AND2.h"

#include <cmath>

#include "model/PortInfo.h"
#include "model/TransitionInfo.h"
#include "model/EventInfo.h"
#include "model/std_cells/StdCellLib.h"
#include "model/std_cells/CellMacros.h"
#include "model/timing_graph/ElectricalNet.h"
#include "model/timing_graph/ElectricalDriver.h"
#include "model/timing_graph/ElectricalLoad.h"
#include "model/timing_graph/ElectricalDelay.h"

namespace DSENT
{
    using std::max;

    AND2::AND2(const String& instance_name_, const TechModel* tech_model_)
        : StdCell(instance_name_, tech_model_)
    {
        initProperties();
    }

    AND2::~AND2()
    {}

    void AND2::initProperties()
    {
        return;
    }

    void AND2::constructModel()
    {
        // All constructModel should do is create Area/NDDPower/Energy Results as
        // well as instantiate any sub-instances using only the hard parameters

        createInputPort("A");
        createInputPort("B");
        createOutputPort("Y");

        createLoad("A_Cap");
        createLoad("B_Cap");
        createDelay("A_to_Y_delay");
        createDelay("B_to_Y_delay");
        createDriver("Y_Ron", true);

        ElectricalLoad* a_cap = getLoad("A_Cap");
        ElectricalLoad* b_cap = getLoad("B_Cap");
        ElectricalDelay* a_to_y_delay = getDelay("A_to_Y_delay");
        ElectricalDelay* b_to_y_delay = getDelay("B_to_Y_delay");
        ElectricalDriver* y_ron = getDriver("Y_Ron");

        getNet("A")->addDownstreamNode(a_cap);
        getNet("B")->addDownstreamNode(b_cap);
        a_cap->addDownstreamNode(a_to_y_delay);
        b_cap->addDownstreamNode(b_to_y_delay);
        a_to_y_delay->addDownstreamNode(y_ron);
        b_to_y_delay->addDownstreamNode(y_ron);
        y_ron->addDownstreamNode(getNet("Y"));

        // Create Area result
        // Create NDD Power result
        createElectricalAtomicResults();
        getEventInfo("Idle")->setStaticTransitionInfos();
        // Create AND Event Energy Result
        createElectricalEventAtomicResult("AND2");

        return;
    }

    void AND2::updateModel()
    {
        // All updateModel should do is calculate numbers for the Area/NDDPower/Energy
        // Results as anything else that needs to be done using either soft or hard parameters

        // Get parameters
        double drive_strength = getDrivingStrength();
        Map<double>* cache = getTechModel()->getStdCellLib()->getStdCellCache();

        // Standard cell cache string
        String cell_name = "AND2_X" + (String) drive_strength;

        // Get timing parameters
        getLoad("A_Cap")->setLoadCap(cache->get(cell_name + "->Cap->A"));
        getLoad("B_Cap")->setLoadCap(cache->get(cell_name + "->Cap->B"));
        getDelay("A_to_Y_delay")->setDelay(cache->get(cell_name + "->Delay->A_to_Y"));
        getDelay("B_to_Y_delay")->setDelay(cache->get(cell_name + "->Delay->B_to_Y"));
        getDriver("Y_Ron")->setOutputRes(cache->get(cell_name + "->DriveRes->Y"));

        // Set the cell area
        getAreaResult("Active")->setValue(cache->get(cell_name + "->ActiveArea"));
        getAreaResult("Metal1Wire")->setValue(cache->get(cell_name + "->ActiveArea"));

        return;
    }

    void AND2::evaluateModel()
    {
        return;
    }

    void AND2::useModel()
    {
        // Get parameters
        double drive_strength = getDrivingStrength();
        Map<double>* cache = getTechModel()->getStdCellLib()->getStdCellCache();

        // Standard cell cache string
        String cell_name = "AND2_X" + (String) drive_strength;

        // Propagate the transition info and get the 0->1 transtion count
        propagateTransitionInfo();
        double P_A = getInputPort("A")->getTransitionInfo().getProbability1();
        double P_B = getInputPort("B")->getTransitionInfo().getProbability1();
        double Y_num_trans_01 = getOutputPort("Y")->getTransitionInfo().getNumberTransitions01();

        // Calculate leakage
        double leakage = 0;
        leakage += cache->get(cell_name + "->Leakage->!A!B") * (1 - P_A) * (1 - P_B);
        leakage += cache->get(cell_name + "->Leakage->!AB") * (1 - P_A) * P_B;
        leakage += cache->get(cell_name + "->Leakage->A!B") * P_A * (1 - P_B);
        leakage += cache->get(cell_name + "->Leakage->AB") * P_A * P_B;
        getNddPowerResult("Leakage")->setValue(leakage);

        // Get VDD
        double vdd = getTechModel()->get("Vdd");

        // Get capacitances
        double y_b_cap = cache->get(cell_name + "->Cap->Y_b");
        double y_cap = cache->get(cell_name + "->Cap->Y");
        double y_load_cap = getNet("Y")->getTotalDownstreamCap();

        // Calculate AND2Event energy
        double energy_per_trans_01 = (y_b_cap + y_cap + y_load_cap) * vdd * vdd;
        getEventResult("AND2")->setValue(energy_per_trans_01 * Y_num_trans_01);

        return;
    }

    void AND2::propagateTransitionInfo()
    {
        // Get input signal transition info
        const TransitionInfo& trans_A = getInputPort("A")->getTransitionInfo();
        const TransitionInfo& trans_B = getInputPort("B")->getTransitionInfo();

        double max_freq_mult = max(trans_A.getFrequencyMultiplier(), trans_B.getFrequencyMultiplier());
        const TransitionInfo& scaled_trans_A = trans_A.scaleFrequencyMultiplier(max_freq_mult);
        const TransitionInfo& scaled_trans_B = trans_B.scaleFrequencyMultiplier(max_freq_mult);

        double A_prob_00 = scaled_trans_A.getNumberTransitions00() / max_freq_mult;
        double A_prob_01 = scaled_trans_A.getNumberTransitions01() / max_freq_mult;
        double A_prob_10 = A_prob_01;
        double A_prob_11 = scaled_trans_A.getNumberTransitions11() / max_freq_mult;
        double B_prob_00 = scaled_trans_B.getNumberTransitions00() / max_freq_mult;
        double B_prob_01 = scaled_trans_B.getNumberTransitions01() / max_freq_mult;
        double B_prob_10 = B_prob_01;
        double B_prob_11 = scaled_trans_B.getNumberTransitions11() / max_freq_mult;

        // Set output transition info
        double Y_prob_00 = A_prob_00 +
                        A_prob_01 * (B_prob_00 + B_prob_10) +
                        A_prob_10 * (B_prob_00 + B_prob_01) +
                        A_prob_11 * B_prob_00;
        double Y_prob_01 = A_prob_01 * (B_prob_01 + B_prob_11) +
                        A_prob_11 * B_prob_01;
        double Y_prob_11 = A_prob_11 * B_prob_11;

        // Check that probabilities add up to 1.0 with some finite tolerance
        ASSERT(LibUtil::Math::isEqual(Y_prob_00 + Y_prob_01 + Y_prob_01 + Y_prob_11, 1.0), "[Error] " + getInstanceName() +
            "Output transition probabilities must add up to 1 (" + (String) Y_prob_00 + ", " +
            (String) Y_prob_01 + ", " + (String) Y_prob_11 + ")!");

        // Turn probability of transitions per cycle into number of transitions per time unit
        TransitionInfo trans_Y(Y_prob_00 * max_freq_mult, Y_prob_01 * max_freq_mult, Y_prob_11 * max_freq_mult);
        getOutputPort("Y")->setTransitionInfo(trans_Y);
        return;
    }

    void AND2::cacheStdCell(StdCellLib* cell_lib_, double drive_strength_)
    {
        // Standard cell cache string
        String cell_name = "AND2_X" + (String) drive_strength_;

        Log::printLine("=== " + cell_name + " ===");

        // Get parameters
        double gate_pitch = cell_lib_->getTechModel()->get("Gate->PitchContacted");
        Map<double>* cache = cell_lib_->getStdCellCache();

        // Now actually build the full standard cell model
        // Create the two input ports
        createInputPort("A");
        createInputPort("B");
        createOutputPort("Y");

        createNet("Y_b");

        // Adds macros
        CellMacros::addNand2(this, "NAND2", false, true, true, "A", "B", "Y_b");
        CellMacros::addInverter(this, "INV", false, true, "Y_b", "Y");
        CellMacros::updateNand2(this, "NAND2", drive_strength_ * 0.5);
        CellMacros::updateInverter(this, "INV", drive_strength_ * 1.0);

        // Cache area result
        double area = 0.0;
        area += gate_pitch * getTotalHeight() * 1;
        area += gate_pitch * getTotalHeight() * getGenProperties()->get("NAND2_GatePitches").toDouble();
        area += gate_pitch * getTotalHeight() * getGenProperties()->get("INV_GatePitches").toDouble();
        cache->set(cell_name + "->ActiveArea", area);
        Log::printLine(cell_name + "->ActiveArea=" + (String) area);

        // --------------------------------------------------------------------
        // Leakage Model Calculation
        // --------------------------------------------------------------------
        double leakage_00 = getGenProperties()->get("NAND2_LeakagePower_00").toDouble() +
                            getGenProperties()->get("INV_LeakagePower_0").toDouble();
        double leakage_01 = getGenProperties()->get("NAND2_LeakagePower_01").toDouble() +
                            getGenProperties()->get("INV_LeakagePower_0").toDouble();
        double leakage_10 = getGenProperties()->get("NAND2_LeakagePower_10").toDouble() +
                            getGenProperties()->get("INV_LeakagePower_0").toDouble();
        double leakage_11 = getGenProperties()->get("NAND2_LeakagePower_11").toDouble() +
                            getGenProperties()->get("INV_LeakagePower_1").toDouble();
        cache->set(cell_name + "->Leakage->!A!B", leakage_00);
        cache->set(cell_name + "->Leakage->!AB", leakage_01);
        cache->set(cell_name + "->Leakage->A!B", leakage_10);
        cache->set(cell_name + "->Leakage->AB", leakage_11);
        Log::printLine(cell_name + "->Leakage->!A!B=" + (String) leakage_00);
        Log::printLine(cell_name + "->Leakage->!AB=" + (String) leakage_01);
        Log::printLine(cell_name + "->Leakage->A!B=" + (String) leakage_10);
        Log::printLine(cell_name + "->Leakage->AB=" + (String) leakage_11);
        // --------------------------------------------------------------------

        // --------------------------------------------------------------------
        // Get Node Capacitances
        // --------------------------------------------------------------------
        double a_cap = getNet("A")->getTotalDownstreamCap();
        double b_cap = getNet("B")->getTotalDownstreamCap();
        double y_b_cap = getNet("Y_b")->getTotalDownstreamCap();
        double y_cap = getNet("Y")->getTotalDownstreamCap();

        cache->set(cell_name + "->Cap->A", a_cap);
        cache->set(cell_name + "->Cap->B", b_cap);
        cache->set(cell_name + "->Cap->Y_b", y_b_cap);
        cache->set(cell_name + "->Cap->Y", y_cap);
        Log::printLine(cell_name + "->Cap->A=" + (String) a_cap);
        Log::printLine(cell_name + "->Cap->B=" + (String) b_cap);
        Log::printLine(cell_name + "->Cap->Y=" + (String) y_b_cap);
        Log::printLine(cell_name + "->Cap->Y=" + (String) y_cap);
        // --------------------------------------------------------------------

        // --------------------------------------------------------------------
        // Build Internal Delay Model
        // --------------------------------------------------------------------
        double y_ron = getDriver("INV_RonZN")->getOutputRes();
        double a_to_y_delay = getDriver("NAND2_RonZN")->calculateDelay() +
                              getDriver("INV_RonZN")->calculateDelay();
        double b_to_y_delay = getDriver("NAND2_RonZN")->calculateDelay() +
                              getDriver("INV_RonZN")->calculateDelay();

        cache->set(cell_name + "->DriveRes->Y", y_ron);
        cache->set(cell_name + "->Delay->A_to_Y", a_to_y_delay);
        cache->set(cell_name + "->Delay->B_to_Y", b_to_y_delay);
        Log::printLine(cell_name + "->DriveRes->Y=" + (String) y_ron);
        Log::printLine(cell_name + "->Delay->A_to_Y=" + (String) a_to_y_delay);
        Log::printLine(cell_name + "->Delay->B_to_Y=" + (String) b_to_y_delay);
        // --------------------------------------------------------------------

        return;

    }
} // namespace DSENT