Searched hist:11730 (Results 1 - 14 of 14) sorted by relevance
/gem5/tests/test-progs/insttest/src/riscv/ | ||
H A D | rv64a.h | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | rv64d.cpp | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | rv64d.h | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | rv64f.cpp | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | rv64f.h | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | rv64i.h | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | rv64m.cpp | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | rv64m.h | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | rv64a.cpp | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | insttest.h | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | rv64i.cpp | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
H A D | Makefile | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
/gem5/tests/test-progs/hello/bin/riscv/linux/ | ||
H A D | hello | 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
/gem5/util/ | ||
H A D | regress | diff 11730:08ab68477ea0 Wed Nov 30 17:12:00 EST 2016 Alec Roelke <ar4jc@virginia.edu> riscv: [Patch 8/5] Added some regression tests to RISC-V This patch is the eighth patch in a series adding RISC-V to gem5, and third of the bonus patches to the original series of five. It adds some regression tests to RISC-V. Regression tests included: - se/00.hello - se/02.insttest (split into several binaries which are not included due to large size) The tests added to 00.insttest will need to be build manually; to facilitate this, a Makefile is included. The required toolchain and compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools GitHub repository at https://github.com/riscv/riscv-tools. Note that because EBREAK only makes sense when gdb is running or while in FS mode, it is not included in the linux-rv64i insttest. ERET is not included because it does not make sense in SE mode and, in fact, causes a panic by design. Note also that not every system call is tested in linux-rv64i; of the ones defined in linux/process.hh, some have been given numbers but not definitions for the toolchain, or are merely stubs that always return 0. Of the ones that do work properly, only a subset are tested due to similar functionality. Signed-off by: Alec Roelke Signed-off by: Jason Lowe-Power <jason@lowepower.com> |
Completed in 36 milliseconds