0a1,12
> # Copyright (c) 2015 ARM Limited
> # All rights reserved.
> #
> # The license below extends only to copyright in the software and shall
> # not be construed as granting a license to any other intellectual
> # property including but not limited to intellectual property relating
> # to a hardware implementation of the functionality of the software
> # licensed hereunder. You may use the software subject to the license
> # terms below provided that you ensure that this notice is replicated
> # unmodified and in its entirety in all distributions of the software,
> # modified or unmodified, in source code or in binary form.
> #
27a40
> # Andreas Hansson
36,47c49,63
< max_loads = Param.Counter(0, "number of loads to execute")
< atomic = Param.Bool(False, "Execute tester in atomic mode? (or timing)\n")
< memory_size = Param.Int(65536, "memory size")
< percent_dest_unaligned = Param.Percent(50,
< "percent of copy dest address that are unaligned")
< percent_reads = Param.Percent(65, "target read percentage")
< issue_dmas = Param.Bool(False, "this memtester should issue dma requests")
< percent_source_unaligned = Param.Percent(50,
< "percent of copy source address that are unaligned")
< percent_functional = Param.Percent(50, "percent of access that are functional")
< percent_uncacheable = Param.Percent(10,
< "target uncacheable percentage")
---
>
> # Interval of packet injection, the size of the memory range
> # touched, and an optional stop condition
> interval = Param.Cycles(1, "Interval between request packets")
> size = Param.Unsigned(65536, "Size of memory region to use (bytes)")
> max_loads = Param.Counter(0, "Number of loads to execute before exiting")
>
> # Control the mix of packets and if functional accesses are part of
> # the mix or not
> percent_reads = Param.Percent(65, "Percentage reads")
> percent_functional = Param.Percent(50, "Percentage functional accesses")
> percent_uncacheable = Param.Percent(10, "Percentage uncacheable")
>
> # Determine how often to print progress messages and what timeout
> # to use for checking progress of both requests and responses
49,50c65,67
< "progress report interval (in accesses)")
< trace_addr = Param.Addr(0, "address to trace")
---
> "Progress report interval (in accesses)")
> progress_check = Param.Cycles(5000000, "Cycles before exiting " \
> "due to lack of progress")
52,57c69,70
< test = MasterPort("Port to the memory system to test")
< functional = MasterPort("Port to the functional memory " \
< "used for verification")
< suppress_func_warnings = Param.Bool(False,
< "suppress warnings when functional accesses fail.\n")
< sys = Param.System(Parent.any, "System Parameter")
---
> port = MasterPort("Port to the memory system")
> system = Param.System(Parent.any, "System this tester is part of")
58a72,75
> # Add the ability to supress error responses on functional
> # accesses as Ruby needs this
> suppress_func_warnings = Param.Bool(False, "Suppress warnings when "\
> "functional accesses fail.")
> # Copyright (c) 2015 ARM Limited
> # All rights reserved.
> #
> # The license below extends only to copyright in the software and shall
> # not be construed as granting a license to any other intellectual
> # property including but not limited to intellectual property relating
> # to a hardware implementation of the functionality of the software
> # licensed hereunder. You may use the software subject to the license
> # terms below provided that you ensure that this notice is replicated
> # unmodified and in its entirety in all distributions of the software,
> # modified or unmodified, in source code or in binary form.
> #
27a40
> # Andreas Hansson
36,47c49,63
< max_loads = Param.Counter(0, "number of loads to execute")
< atomic = Param.Bool(False, "Execute tester in atomic mode? (or timing)\n")
< memory_size = Param.Int(65536, "memory size")
< percent_dest_unaligned = Param.Percent(50,
< "percent of copy dest address that are unaligned")
< percent_reads = Param.Percent(65, "target read percentage")
< issue_dmas = Param.Bool(False, "this memtester should issue dma requests")
< percent_source_unaligned = Param.Percent(50,
< "percent of copy source address that are unaligned")
< percent_functional = Param.Percent(50, "percent of access that are functional")
< percent_uncacheable = Param.Percent(10,
< "target uncacheable percentage")
---
>
> # Interval of packet injection, the size of the memory range
> # touched, and an optional stop condition
> interval = Param.Cycles(1, "Interval between request packets")
> size = Param.Unsigned(65536, "Size of memory region to use (bytes)")
> max_loads = Param.Counter(0, "Number of loads to execute before exiting")
>
> # Control the mix of packets and if functional accesses are part of
> # the mix or not
> percent_reads = Param.Percent(65, "Percentage reads")
> percent_functional = Param.Percent(50, "Percentage functional accesses")
> percent_uncacheable = Param.Percent(10, "Percentage uncacheable")
>
> # Determine how often to print progress messages and what timeout
> # to use for checking progress of both requests and responses
49,50c65,67
< "progress report interval (in accesses)")
< trace_addr = Param.Addr(0, "address to trace")
---
> "Progress report interval (in accesses)")
> progress_check = Param.Cycles(5000000, "Cycles before exiting " \
> "due to lack of progress")
52,57c69,70
< test = MasterPort("Port to the memory system to test")
< functional = MasterPort("Port to the functional memory " \
< "used for verification")
< suppress_func_warnings = Param.Bool(False,
< "suppress warnings when functional accesses fail.\n")
< sys = Param.System(Parent.any, "System Parameter")
---
> port = MasterPort("Port to the memory system")
> system = Param.System(Parent.any, "System this tester is part of")
58a72,75
> # Add the ability to supress error responses on functional
> # accesses as Ruby needs this
> suppress_func_warnings = Param.Bool(False, "Suppress warnings when "\
> "functional accesses fail.")