Searched hist:2014 (Results 1401 - 1425 of 1681) sorted by relevance

<<51525354555657585960>>

/gem5/src/arch/mips/isa/formats/
H A Dbasic.isa10196:be0e1724eb39 Fri May 09 18:58:00 EDT 2014 Curtis Dunham <Curtis.Dunham@arm.com> arch: teach ISA parser how to split code across files

This patch encompasses several interrelated and interdependent changes
to the ISA generation step. The end goal is to reduce the size of the
generated compilation units for instruction execution and decoding so
that batch compilation can proceed with all CPUs active without
exhausting physical memory.

The ISA parser (src/arch/isa_parser.py) has been improved so that it can
accept 'split [output_type];' directives at the top level of the grammar
and 'split(output_type)' python calls within 'exec {{ ... }}' blocks.
This has the effect of "splitting" the files into smaller compilation
units. I use air-quotes around "splitting" because the files themselves
are not split, but preprocessing directives are inserted to have the same
effect.

Architecturally, the ISA parser has had some changes in how it works.
In general, it emits code sooner. It doesn't generate per-CPU files,
and instead defers to the C preprocessor to create the duplicate copies
for each CPU type. Likewise there are more files emitted and the C
preprocessor does more substitution that used to be done by the ISA parser.

Finally, the build system (SCons) needs to be able to cope with a
dynamic list of source files coming out of the ISA parser. The changes
to the SCons{cript,truct} files support this. In broad strokes, the
targets requested on the command line are hidden from SCons until all
the build dependencies are determined, otherwise it would try, realize
it can't reach the goal, and terminate in failure. Since build steps
(i.e. running the ISA parser) must be taken to determine the file list,
several new build stages have been inserted at the very start of the
build. First, the build dependencies from the ISA parser will be emitted
to arch/$ISA/generated/inc.d, which is then read by a new SCons builder
to finalize the dependencies. (Once inc.d exists, the ISA parser will not
need to be run to complete this step.) Once the dependencies are known,
the 'Environments' are made by the makeEnv() function. This function used
to be called before the build began but now happens during the build.
It is easy to see that this step is quite slow; this is a known issue
and it's important to realize that it was already slow, but there was
no obvious cause to attribute it to since nothing was displayed to the
terminal. Since new steps that used to be performed serially are now in a
potentially-parallel build phase, the pathname handling in the SCons scripts
has been tightened up to deal with chdir() race conditions. In general,
pathnames are computed earlier and more likely to be stored, passed around,
and processed as absolute paths rather than relative paths. In the end,
some of these issues had to be fixed by inserting serializing dependencies
in the build.

Minor note:
For the null ISA, we just provide a dummy inc.d so SCons is never
compelled to try to generate it. While it seems slightly wrong to have
anything in src/arch/*/generated (i.e. a non-generated 'generated' file),
it's by far the simplest solution.
10184:bbfa3152bdea Fri May 09 18:58:00 EDT 2014 Curtis Dunham <Curtis.Dunham@arm.com> arch: remove inline specifiers on all inst constrs, all ISAs

With (upcoming) separate compilation, they are useless. Only
link-time optimization could re-inline them, but ideally
feedback-directed optimization would choose to do so only for
profitable (i.e. common) instructions.
H A Dfp.isa10474:799c8ee4ecba Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use shared_ptr for all Faults

This patch takes quite a large step in transitioning from the ad-hoc
RefCountingPtr to the c++11 shared_ptr by adopting its use for all
Faults. There are no changes in behaviour, and the code modifications
are mostly just replacing "new" with "make_shared".
10196:be0e1724eb39 Fri May 09 18:58:00 EDT 2014 Curtis Dunham <Curtis.Dunham@arm.com> arch: teach ISA parser how to split code across files

This patch encompasses several interrelated and interdependent changes
to the ISA generation step. The end goal is to reduce the size of the
generated compilation units for instruction execution and decoding so
that batch compilation can proceed with all CPUs active without
exhausting physical memory.

The ISA parser (src/arch/isa_parser.py) has been improved so that it can
accept 'split [output_type];' directives at the top level of the grammar
and 'split(output_type)' python calls within 'exec {{ ... }}' blocks.
This has the effect of "splitting" the files into smaller compilation
units. I use air-quotes around "splitting" because the files themselves
are not split, but preprocessing directives are inserted to have the same
effect.

Architecturally, the ISA parser has had some changes in how it works.
In general, it emits code sooner. It doesn't generate per-CPU files,
and instead defers to the C preprocessor to create the duplicate copies
for each CPU type. Likewise there are more files emitted and the C
preprocessor does more substitution that used to be done by the ISA parser.

Finally, the build system (SCons) needs to be able to cope with a
dynamic list of source files coming out of the ISA parser. The changes
to the SCons{cript,truct} files support this. In broad strokes, the
targets requested on the command line are hidden from SCons until all
the build dependencies are determined, otherwise it would try, realize
it can't reach the goal, and terminate in failure. Since build steps
(i.e. running the ISA parser) must be taken to determine the file list,
several new build stages have been inserted at the very start of the
build. First, the build dependencies from the ISA parser will be emitted
to arch/$ISA/generated/inc.d, which is then read by a new SCons builder
to finalize the dependencies. (Once inc.d exists, the ISA parser will not
need to be run to complete this step.) Once the dependencies are known,
the 'Environments' are made by the makeEnv() function. This function used
to be called before the build began but now happens during the build.
It is easy to see that this step is quite slow; this is a known issue
and it's important to realize that it was already slow, but there was
no obvious cause to attribute it to since nothing was displayed to the
terminal. Since new steps that used to be performed serially are now in a
potentially-parallel build phase, the pathname handling in the SCons scripts
has been tightened up to deal with chdir() race conditions. In general,
pathnames are computed earlier and more likely to be stored, passed around,
and processed as absolute paths rather than relative paths. In the end,
some of these issues had to be fixed by inserting serializing dependencies
in the build.

Minor note:
For the null ISA, we just provide a dummy inc.d so SCons is never
compelled to try to generate it. While it seems slightly wrong to have
anything in src/arch/*/generated (i.e. a non-generated 'generated' file),
it's by far the simplest solution.
/gem5/src/arch/sparc/isa/formats/
H A Dbasic.isa10196:be0e1724eb39 Fri May 09 18:58:00 EDT 2014 Curtis Dunham <Curtis.Dunham@arm.com> arch: teach ISA parser how to split code across files

This patch encompasses several interrelated and interdependent changes
to the ISA generation step. The end goal is to reduce the size of the
generated compilation units for instruction execution and decoding so
that batch compilation can proceed with all CPUs active without
exhausting physical memory.

The ISA parser (src/arch/isa_parser.py) has been improved so that it can
accept 'split [output_type];' directives at the top level of the grammar
and 'split(output_type)' python calls within 'exec {{ ... }}' blocks.
This has the effect of "splitting" the files into smaller compilation
units. I use air-quotes around "splitting" because the files themselves
are not split, but preprocessing directives are inserted to have the same
effect.

Architecturally, the ISA parser has had some changes in how it works.
In general, it emits code sooner. It doesn't generate per-CPU files,
and instead defers to the C preprocessor to create the duplicate copies
for each CPU type. Likewise there are more files emitted and the C
preprocessor does more substitution that used to be done by the ISA parser.

Finally, the build system (SCons) needs to be able to cope with a
dynamic list of source files coming out of the ISA parser. The changes
to the SCons{cript,truct} files support this. In broad strokes, the
targets requested on the command line are hidden from SCons until all
the build dependencies are determined, otherwise it would try, realize
it can't reach the goal, and terminate in failure. Since build steps
(i.e. running the ISA parser) must be taken to determine the file list,
several new build stages have been inserted at the very start of the
build. First, the build dependencies from the ISA parser will be emitted
to arch/$ISA/generated/inc.d, which is then read by a new SCons builder
to finalize the dependencies. (Once inc.d exists, the ISA parser will not
need to be run to complete this step.) Once the dependencies are known,
the 'Environments' are made by the makeEnv() function. This function used
to be called before the build began but now happens during the build.
It is easy to see that this step is quite slow; this is a known issue
and it's important to realize that it was already slow, but there was
no obvious cause to attribute it to since nothing was displayed to the
terminal. Since new steps that used to be performed serially are now in a
potentially-parallel build phase, the pathname handling in the SCons scripts
has been tightened up to deal with chdir() race conditions. In general,
pathnames are computed earlier and more likely to be stored, passed around,
and processed as absolute paths rather than relative paths. In the end,
some of these issues had to be fixed by inserting serializing dependencies
in the build.

Minor note:
For the null ISA, we just provide a dummy inc.d so SCons is never
compelled to try to generate it. While it seems slightly wrong to have
anything in src/arch/*/generated (i.e. a non-generated 'generated' file),
it's by far the simplest solution.
10184:bbfa3152bdea Fri May 09 18:58:00 EDT 2014 Curtis Dunham <Curtis.Dunham@arm.com> arch: remove inline specifiers on all inst constrs, all ISAs

With (upcoming) separate compilation, they are useless. Only
link-time optimization could re-inline them, but ideally
feedback-directed optimization would choose to do so only for
profitable (i.e. common) instructions.
/gem5/src/dev/arm/
H A Dpl111.cc10565:23593fdaadcd Tue Dec 02 06:07:00 EST 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Remove redundant Packet::allocate calls

This patch cleans up the packet memory allocation confusion. The data
is always allocated at the requesting side, when a packet is created
(or copied), and there is never a need for any device to allocate any
space if it is merely responding to a paket. This behaviour is in line
with how SystemC and TLM works as well, thus increasing
interoperability, and matching established conventions.

The redundant calls to Packet::allocate are removed, and the checks in
the function are tightened up to make sure data is only ever allocated
once. There are still some oddities in the packet copy constructor
where we copy the data pointer if it is static (without ownership),
and allocate new space if the data is dynamic (with ownership). The
latter is being worked on further in a follow-on patch.
10367:bf52480abd01 Fri Sep 12 10:22:00 EDT 2014 Andrew Bardsley <Andrew.Bardsley@arm.com> style: Fix line continuation, especially in debug messages

This patch closes a number of space gaps in debug messages caused by
the incorrect use of line continuation within strings. (There's also
one consistency change to a similar, but correct, use of line
continuation)
H A DSConscript10396:5eede8466691 Sat Sep 20 17:18:00 EDT 2014 Akash Bagdia <akash.bagdia@arm.com> energy: Memory-mapped Energy Controller component

This patch provides an Energy Controller device that provides software
(driver) access to a DVFS handler. The device is currently residing in
the dev/arm tree, but there is nothing inherently ARM specific in the
behaviour. It is currently only tested and supported for ARM Linux,
hence the location.
10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
/gem5/src/arch/arm/
H A Dnativetrace.cc10338:8bee5f4edb92 Tue Apr 29 17:05:00 EDT 2014 Curtis Dunham <Curtis.Dunham@arm.com> arm: use condition code registers for ARM ISA

Analogous to ee049bf (for x86). Requires a bump of the checkpoint version
and corresponding upgrader code to move the condition code register values
to the new register file.
10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
H A Dregisters.hh10338:8bee5f4edb92 Tue Apr 29 17:05:00 EDT 2014 Curtis Dunham <Curtis.Dunham@arm.com> arm: use condition code registers for ARM ISA

Analogous to ee049bf (for x86). Requires a bump of the checkpoint version
and corresponding upgrader code to move the condition code register values
to the new register file.
10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
H A Disa.cc10609:ae5582819481 Tue Dec 23 09:31:00 EST 2014 Andreas Sandberg <andreas.sandberg@arm.com> arm: Add support for filtering in the PMU

This patch adds support for filtering events in the PMU. In order to
do so, it updates the ISADevice base class to forward an ISA pointer
to ISA devices. This enables such devices to access the MiscReg file
to determine the current execution level.
10508:aa46a8ae3487 Thu Oct 30 00:18:00 EDT 2014 Ali Saidi <Ali.Saidi@ARM.com> arm: Fix multi-system AArch64 boot w/caches.

Automatically extract cpu release address from DTB file.
Check SCTLR_EL1 to verify all caches are enabled.
10461:afeb5cdb3907 Thu Oct 16 05:49:00 EDT 2014 Andreas Sandberg <Andreas.Sandberg@ARM.com> arm: Add a model of an ARM PMUv3

This class implements a subset of the ARM PMU v3 specification as
described in the ARMv8 reference manual. It supports most of the
features of the PMU, however the following features are known to be
missing:

* Event filtering (e.g., from different privilege levels).
* Access controls (the PMU currently ignores the execution level).
* The chain counter (event no. 0x1E) is unimplemented.

The PMU itself does not implement any events, it merely provides an
interface for the configuration scripts to hook up probes that drive
events. Configuration scripts should call addEventProbe() to configure
custom events or high-level methods to configure architected
events. The Python implementation of addEventProbe() automatically
delays event type registration until after instantiation.

In order to support CPU switching and some combined counters (e.g.,
memory references synthesized from loads and stores), the PMU allows
multiple probes per event type. When creating a system that switches
between CPU models that share the same PMU, PMU events for all of the
CPU models can be registered with the PMU.

Kudos to Matt Horsnell for the initial gem5 implementation of the PMU.
10338:8bee5f4edb92 Tue Apr 29 17:05:00 EDT 2014 Curtis Dunham <Curtis.Dunham@arm.com> arm: use condition code registers for ARM ISA

Analogous to ee049bf (for x86). Requires a bump of the checkpoint version
and corresponding upgrader code to move the condition code register values
to the new register file.
10204:82d8f37e5b57 Thu Apr 17 17:55:00 EDT 2014 Ali Saidi <Ali.Saidi@ARM.com> arm: allow DC instructions by default so SE mode works
10188:c09802451018 Fri May 09 18:58:00 EDT 2014 Geoffrey Blake <geoffrey.blake@arm.com> arm: Panics in miscreg read functions can be tripped by O3 model

Unimplemented miscregs for the generic timer were guarded by panics
in arm/isa.cc which can be tripped by the O3 model if it speculatively
executes a wrong path containing a mrs instruction with a bad miscreg
index. These registers were flagged as implemented and accessible.
This patch changes the miscreg info bit vector to flag them as
unimplemented and inaccessible. In this case, and UndefinedInst
fault will be generated if the register access is not trapped
by a hypervisor.
10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
10035:2a0fbecfeb14 Fri Jan 24 16:29:00 EST 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Make all register index flattening const

This patch makes all the register index flattening methods const for
all the ISAs. As part of this, readMiscRegNoEffect for ARM is also
made const.
/gem5/src/sim/
H A Dinit.cc10453:d0365cc3d05f Thu Oct 16 05:49:00 EDT 2014 Andrew Bardsley <Andrew.Bardsley@arm.com> config: Add a --without-python option to build process

Add the ability to build libgem5 without embedded Python or the
ability to configure with Python.

This is a prelude to a patch to allow config.ini files to be loaded
into libgem5 using only C++ which would make embedding gem5 within
other simulation systems easier.

This adds a few registration interfaces to things which cross
between Python and C++. Namely: stats dumping and SimObject resolving
10178:0d8e24faf1f8 Wed Apr 23 05:18:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> sim: Use correct unit for abort message

This patch fixes the unit in the abort printout.
H A Dclocked_object.hh11422:4f749e00b667 Tue Nov 18 09:00:00 EST 2014 Akash Bagdia <akash.bagdia@ARM.com> power: Add power states to ClockedObject

Add 4 power states to the ClockedObject, provides necessary access functions
to check and update the power state. Default power state is UNDEFINED, it is
responsibility of the respective simulation model to provide the startup state
and any other logic for state change.

Add number of transition stat.
Add distribution of time spent in clock gated state.
Add power state residency stat.

Add dump call back function to allow stats update of distribution and residency
stats.
10236:79af6cc0384d Mon Jun 09 23:01:00 EDT 2014 Joel Hestness <jthestness@gmail.com> sim: More rigorous clocking comments

The language describing the clockEdge and nextCycle functions were ambiguous,
and so were prone to misinterpretation/misuse. Clear up the comments to more
rigorously describe their functionality.
H A Dfaults.hh10474:799c8ee4ecba Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use shared_ptr for all Faults

This patch takes quite a large step in transitioning from the ad-hoc
RefCountingPtr to the c++11 shared_ptr by adopting its use for all
Faults. There are no changes in behaviour, and the code modifications
are mostly just replacing "new" with "make_shared".
10417:710ee116eb68 Sat Sep 27 09:08:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use const StaticInstPtr references where possible

This patch optimises the passing of StaticInstPtr by avoiding copying
the reference-counting pointer. This avoids first incrementing and
then decrementing the reference-counting pointer.
/gem5/tests/configs/
H A Dbase_config.py10512:b423e1d0735e Thu Oct 30 00:18:00 EDT 2014 Ali Saidi <Ali.Saidi@ARM.com> arm, tests: Update config files to more recent kernels and create 64-bit regressions.

This changes the default ARM system to a Versatile Express-like system that supports
2GB of memory and PCI devices and updates the default kernels/file-systems for
AArch64 ARM systems (64-bit) to support up to 32GB of memory and PCI devices. Some
platforms that are no longer supported have been pruned from the configuration files.

In addition a set of 64-bit ARM regressions have been added to the regression system.
10405:7a618c07e663 Sat Sep 20 17:18:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Rename Bus to XBar to better reflect its behaviour

This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.

As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.
/gem5/configs/common/
H A DCacheConfig.py10613:9d0aef7a9b2e Tue Dec 23 09:31:00 EST 2014 Marco Elver <Marco.Elver@ARM.com> config: Add --memchecker option

This patch adds the --memchecker option, to denote that a MemChecker
should be instantiated for the system. The exact usage of the MemChecker
depends on the system configuration.

For now CacheConfig.py makes use of the option, adding MemCheckerMonitor
instances between CPUs and D-Caches.

Note, however, that currently this only provides limited checking on a
running system; other parts of the system, such as I/O devices are not
monitored, and may cause warnings to be issued by the monitor.
10405:7a618c07e663 Sat Sep 20 17:18:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Rename Bus to XBar to better reflect its behaviour

This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.

As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.
/gem5/src/arch/mips/
H A Dmt.hh10474:799c8ee4ecba Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use shared_ptr for all Faults

This patch takes quite a large step in transitioning from the ad-hoc
RefCountingPtr to the c++11 shared_ptr by adopting its use for all
Faults. There are no changes in behaviour, and the code modifications
are mostly just replacing "new" with "make_shared".
10407:a9023811bf9e Sat Sep 20 17:18:00 EDT 2014 Mitch Hayenga <mitch.hayenga@arm.com> alpha,arm,mips,power,x86,cpu,sim: Cleanup activate/deactivate

activate(), suspend(), and halt() used on thread contexts had an optional
delay parameter. However this parameter was often ignored. Also, when used,
the delay was seemily arbitrarily set to 0 or 1 cycle (no other delays were
ever specified). This patch removes the delay parameter and 'Events'
associated with them across all ISAs and cores. Unused activate logic
is also removed.
/gem5/src/arch/arm/isa/insts/
H A Dfp.isa10474:799c8ee4ecba Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use shared_ptr for all Faults

This patch takes quite a large step in transitioning from the ad-hoc
RefCountingPtr to the c++11 shared_ptr by adopting its use for all
Faults. There are no changes in behaviour, and the code modifications
are mostly just replacing "new" with "make_shared".
10037:5cac77888310 Fri Jan 24 16:29:00 EST 2014 ARM gem5 Developers arm: Add support for ARMv8 (AArch64 & AArch32)

Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
/gem5/src/base/
H A Dbitfield.hh10537:47fe87b0cf97 Fri Nov 14 03:53:00 EST 2014 Andreas Hansson <andreas.hansson@arm.com> arm: Fixes based on UBSan and static analysis

Another churn to clean up undefined behaviour, mostly ARM, but some
parts also touching the generic part of the code base.

Most of the fixes are simply ensuring that proper intialisation. One
of the more subtle changes is the return type of the sign-extension,
which is changed to uint64_t. This is to avoid shifting negative
values (undefined behaviour) in the ISA code.
10400:0655a3d869ad Thu Apr 24 12:41:00 EDT 2014 Stephan Diestelhorst <stephan.diestelhorst@arm.com> misc: Add functions for doing popcount and power-of-two checking

Adds two public domain algorithms for determining number of set bits and also
whether a value is a power of two, uses the builtin that is available in GCC
and clang for popcount.
/gem5/src/cpu/testers/rubytest/
H A DRubyTester.cc10412:6400a2ab4e22 Sat Sep 27 09:08:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> misc: Fix a bunch of minor issues identified by static analysis

Add some missing initialisation, and fix a handful benign resource
leaks (including some false positives).
10302:0e9e99e6369a Mon Sep 01 17:55:00 EDT 2014 Nilay Vaish <nilay@cs.wisc.edu> ruby: eliminate type Time
There is another type Time in src/base class which results in a conflict.
/gem5/src/mem/
H A Dpacket_queue.cc10423:cc7f3988c5a9 Thu Oct 09 17:51:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Allow packet queue to move next send event forward

This patch changes the packet queue such that when scheduling a send,
the queue is allowed to move the event forward.
10322:7f4059e4f2d5 Wed Sep 03 07:42:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> mem: Packet queue clean up

No change in functionality, just a bit of tidying up.
/gem5/src/cpu/o3/
H A Dlsq_unit.hh10537:47fe87b0cf97 Fri Nov 14 03:53:00 EST 2014 Andreas Hansson <andreas.hansson@arm.com> arm: Fixes based on UBSan and static analysis

Another churn to clean up undefined behaviour, mostly ARM, but some
parts also touching the generic part of the code base.

Most of the fixes are simply ensuring that proper intialisation. One
of the more subtle changes is the return type of the sign-extension,
which is changed to uint64_t. This is to avoid shifting negative
values (undefined behaviour) in the ISA code.
10474:799c8ee4ecba Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use shared_ptr for all Faults

This patch takes quite a large step in transitioning from the ad-hoc
RefCountingPtr to the c++11 shared_ptr by adopting its use for all
Faults. There are no changes in behaviour, and the code modifications
are mostly just replacing "new" with "make_shared".
10342:711eb0e64249 Tue May 13 01:20:00 EDT 2014 Curtis Dunham <Curtis.Dunham@arm.com> mem: Refactor assignment of Packet types

Put the packet type swizzling (that is currently done in a lot of places)
into a refineCommand() member function.
10333:6be8945d226b Wed Sep 03 07:42:00 EDT 2014 Mitch Hayenga <mitch.hayenga@arm.com> cpu: Fix cache blocked load behavior in o3 cpu

This patch fixes the load blocked/replay mechanism in the o3 cpu. Rather than
flushing the entire pipeline, this patch replays loads once the cache becomes
unblocked.

Additionally, deferred memory instructions (loads which had conflicting stores),
when replayed would not respect the number of functional units (only respected
issue width). This patch also corrects that.

Improvements over 20% have been observed on a microbenchmark designed to
exercise this behavior.
10327:5b6279635c49 Wed Sep 03 07:42:00 EDT 2014 Mitch Hayenga <mitch.hayenga@arm.com> cpu: Change writeback modeling for outstanding instructions

As highlighed on the mailing list gem5's writeback modeling can impact
performance. This patch removes the limitation on maximum outstanding issued
instructions, however the number that can writeback in a single cycle is still
respected in instToCommit().
10239:592f0bb6bd6f Sat Jun 21 13:26:00 EDT 2014 Binh Pham <binhpham@cs.rutgers.edu> o3: split load & store queue full cases in rename

Check for free entries in Load Queue and Store Queue separately to
avoid cases when load cannot be renamed due to full Store Queue and
vice versa.

This work was done while Binh was an intern at AMD Research.
10175:e639ff917d2e Tue Apr 01 15:22:00 EDT 2014 Mitch Hayenga <Mitch.Hayenga@ARM.com> cpu: Fix case where o3 lsq could print out uninitialized data

In the O3 LSQ, data read/written is printed out in DPRINTFs. However,
the data field is treated as a character string with a null terminated.
However the data field is not encoded this way. This patch removes
that possibility by removing the data part of the print.
10031:79d034cd6ba3 Fri Jan 24 16:29:00 EST 2014 Ali Saidi <Ali.Saidi@ARM.com> cpu: Add support for instructions that zero cache lines.
/gem5/src/python/m5/stats/
H A D__init__.py10453:d0365cc3d05f Thu Oct 16 05:49:00 EDT 2014 Andrew Bardsley <Andrew.Bardsley@arm.com> config: Add a --without-python option to build process

Add the ability to build libgem5 without embedded Python or the
ability to configure with Python.

This is a prelude to a patch to allow config.ini files to be loaded
into libgem5 using only C++ which would make embedding gem5 within
other simulation systems easier.

This adds a few registration interfaces to things which cross
between Python and C++. Namely: stats dumping and SimObject resolving
10169:628ed23d37af Mon Feb 10 19:24:00 EST 2014 Curtis Dunham <Curtis.Dunham@arm.com> stats: better error message for uninitialized statistic

As suggested by Nathan Binkert in 2008:
http://permalink.gmane.org/gmane.comp.emulators.m5.users/2676
/gem5/
H A DREADME10284:d02872388224 Tue Aug 26 10:12:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> misc: README direct to website for dependencies

This patch updates the README to direct the user to the appropriate
sections on the gem5.org website rather than duplicating information.
/gem5/src/arch/alpha/
H A Dstacktrace.hh10417:710ee116eb68 Sat Sep 27 09:08:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use const StaticInstPtr references where possible

This patch optimises the passing of StaticInstPtr by avoiding copying
the reference-counting pointer. This avoids first incrementing and
then decrementing the reference-counting pointer.
/gem5/src/arch/sparc/
H A Dstacktrace.hh10417:710ee116eb68 Sat Sep 27 09:08:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> arch: Use const StaticInstPtr references where possible

This patch optimises the passing of StaticInstPtr by avoiding copying
the reference-counting pointer. This avoids first incrementing and
then decrementing the reference-counting pointer.
/gem5/src/arch/x86/insts/
H A Dmicroop.hh10201:30a20d2072c1 Fri May 09 18:58:00 EDT 2014 Andrew Bardsley <Andrew.Bardsley@arm.com> cpu: Add flag name printing to StaticInst

This patch adds a the member function StaticInst::printFlags to allow all
of an instruction's flags to be printed without using the individual
is... member functions or resorting to exposing the 'flags' vector

It also replaces the enum definition StaticInst::Flags with a
Python-generated enumeration and adds to the enum generation mechanism
in src/python/m5/params.py to allow Enums to be placed in namespaces
other than Enums or, alternatively, in wrapper structs allowing them to
be inherited by other classes (so populating that class's name-space
with the enumeration element names).
/gem5/util/stats/
H A Ddb.py2014:7df693ff6fa4 Mon Dec 19 02:02:00 EST 2005 Nathan Binkert <binkertn@umich.edu> Add a little bit of support to grab info for making graphs
without using the jobfile.

util/stats/db.py:
util/stats/profile.py:
Make it possible to send job as a string and to set the system
separately from the job.

Completed in 215 milliseconds

<<51525354555657585960>>