Searched hist:13294 (Results 1 - 14 of 14) sorted by relevance

/gem5/src/systemc/ext/channel/
H A Dsc_signal_in_if.hh13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
H A Dsc_signal.hh13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
/gem5/src/systemc/channel/
H A Dsc_signal.cc13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
/gem5/src/systemc/core/
H A Dport.cc13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
H A Dport.hh13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
H A Dsensitivity.cc13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
H A Dsensitivity.hh13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
H A Devent.hh13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
H A Dsc_spawn.cc13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
H A Devent.cc13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
H A Dprocess.hh13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
H A Dsc_module.cc13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
H A Dprocess.cc13288:f1c04129f709 Thu Oct 04 17:59:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Change how signal based resets work.

The previous implementation used the value changed event to track when
signals changed value, but there were a couple problems with this
approach. First, this piggybacked on the sensitivity mechanism in some
ways, but diverged in others. The sensitivity didn't notify a process
when it was satisfied like other sensitivity types would, and it also
ignored whether the process was disabled.

Second, the value_changed_event is notified by a signal instance as a
delta notification, but reset signals are supposed to act immediately.
That means they should happen before all delta notifications, or in
other words all delta notifications should see the reset status of a
given process. That's particularly important in the case of wait(int n)
where setting the reset clears the reset count, and the count is
checked when determining whether or not to wake up a process when its
sensitivity is satisfied, potentially by a delta notification.

Third, by removing the middle man and not trying to repurpose the
sensitivity mechanism, the code gets simpler and easier to understand.

Change-Id: I0d05d11437291d368b060f6a45a207813615f113
Reviewed-on: https://gem5-review.googlesource.com/c/13294
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
/gem5/src/systemc/ext/core/
H A Dsc_event.hh13294:c4bdd09fe163 Fri Oct 05 18:09:00 EDT 2018 Gabe Black <gabeblack@google.com> systemc: Report an error if an sc_event_finder is used on an unbound port.

Rather than assuming the port is bound, check and report an error.

Change-Id: I4af89d104bc6de9932ff044740446833732d01d9
Reviewed-on: https://gem5-review.googlesource.com/c/13300
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

Completed in 79 milliseconds