mem: Make PortProxy use a delegate for a sendFunctional function.

The only part of the MaserPort the PortProxy uses is the sendFunctional
function which is part of the functional protocol. Rather than require
a MasterPort which comes along with a lot of other mechanisms, this
change slightly adjusts the PortProxy to only require that function
through the use of a delegate. That allows lots of flexibility in how
the actual packet gets sent and what sends it.

In cases where code constructs a PortProxy and passes its constructor
an unbound MasterPort, the PortProxy will create a delegate to the
sendFunctional method on its own.

This should also make it easier for objects which don't have
traditional gem5 style ports, for instance systemc models, to implement
just the little bit of the protocol they need, rather than having to
stub out a whole port class, most of which will be ignored.

Change-Id: I234b42ce050f12313b551a61736186ddf2c9e2c7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20229
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem, arm: Replace the pointer type in PortProxy with void *.

The void * type is for pointers which point to an unknown type. We
should use that when handling anonymous buffers in the PortProxy
functions, instead of uint8_t * which points to bytes.

Importantly, C/C++ doesn't require you to do any casting to turn an
arbitrary pointer type into a void *. This will get rid of lots of
tedious, verbose casting throughout the code base.

Change-Id: Id1adecc283c866d8e24524efd64f37b079088bd9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18571
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem, arm: Move some helper methods into the base PortProxy class.

These were originally in the SETranslatingPortProxy class, but they're
not specific to SE mode in any way and are an unnecessary divergence
between the SE and FS mode translating port proxies.

Change-Id: I8cb77531cc287bd15b2386410ffa7b43cdfa67d0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18570
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem: Refactor port proxies to support secure accesses

The current physical port proxy doesn't know how to tag memory
accesses as secure. Refactor the class slightly to create a set of
methods (readBlobPhys, writeBlobPhys, memsetBlobPhys) that always
access physical memory and take a set of Request::Flags as an
argument. The new port proxy, SecurePortProxy, uses this interface to
issue secure physical accesses.

Change-Id: I8232a4b35025be04ec8f91a00f0580266bacb338
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8364
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

arch, mem, sim: Consolidate and rename the SE mode page table classes.

Now that Nothing inherits from PageTableBase directly, it can be
merged into FuncPageTable. This change also takes the opportunity to
rename the combined class to EmulationPageTable which lets you know
that it's specifically for SE mode.

Also remove the page table entry cache since it doesn't seem to
actually improve performance. The TLBs likely absorb the majority of
the locality, essentially acting like a cache like they would in real
hardware.

Change-Id: If1bcb91aed08686603bf7bee37298c0eee826e13
Reviewed-on: https://gem5-review.googlesource.com/7342
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

syscall_emul: [PATCH 15/22] add clone/execve for threading and multiprocess simulations

Modifies the clone system call and adds execve system call. Requires allowing
processes to steal thread contexts from other processes in the same system
object and the ability to detach pieces of process state (such as MemState)
to allow dynamic sharing.

style: [patch 3/22] reduce include dependencies in some headers

Used cppclean to help identify useless includes and removed them. This
involved erroneously included headers, but also cases where forward
declarations could have been used rather than a full include.

mem: Use const pointers for port proxy write functions

This patch changes the various write functions in the port proxies
to use const pointers for all sources (similar to how memcpy works).

The one unfortunate aspect is the need for a const_cast in the packet,
to avoid having to juggle a const and a non-const data pointer. This
design decision can always be re-evaluated at a later stage.

mem: adding a multi-level page table class
This patch defines a multi-level page table class that stores the page table in
system memory, consistent with ISA specifications. In this way, cpu models that
use the actual hardware to execute (e.g. KvmCPU), are able to traverse the page
table.

MEM: Introduce the master/slave port sub-classes in C++

This patch introduces the notion of a master and slave port in the C++
code, thus bringing the previous classification from the Python
classes into the corresponding simulation objects and memory objects.

The patch enables us to classify behaviours into the two bins and add
assumptions and enfore compliance, also simplifying the two
interfaces. As a starting point, isSnooping is confined to a master
port, and getAddrRanges to slave ports. More of these specilisations
are to come in later patches.

The getPort function is not getMasterPort and getSlavePort, and
returns a port reference rather than a pointer as NULL would never be
a valid return value. The default implementation of these two
functions is placed in MemObject, and calls fatal.

The one drawback with this specific patch is that it requires some
code duplication, e.g. QueuedPort becomes QueuedMasterPort and
QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort
(avoiding multiple inheritance). With the later introduction of the
port interfaces, moving the functionality outside the port itself, a
lot of the duplicated code will disappear again.

MEM: Make all the port proxy members const

This is a trivial patch that merely makes all the member functions of
the port proxies const. There is no good reason why they should not
be, and this change only serves to make it explicit that they are not
modified through their use.

MEM: Make port proxies use references rather than pointers

This patch is adding a clearer design intent to all objects that would
not be complete without a port proxy by making the proxies members
rathen than dynamically allocated. In essence, if NULL would not be a
valid value for the proxy, then we avoid using a pointer to make this
clear.

The same approach is used for the methods using these proxies, such as
loadSections, that now use references rather than pointers to better
reflect the fact that NULL would not be an acceptable value (in fact
the code would break and that is how this patch started out).

Overall the concept of "using a reference to express unconditional
composition where a NULL pointer is never valid" could be done on a
much broader scale throughout the code base, but for now it is only
done in the locations affected by the proxies.

Merge with the main repo.

MEM: Add port proxies instead of non-structural ports

Port proxies are used to replace non-structural ports, and thus enable
all ports in the system to correspond to a structural entity. This has
the advantage of accessing memory through the normal memory subsystem
and thus allowing any constellation of distributed memories, address
maps, etc. Most accesses are done through the "system port" that is
used for loading binaries, debugging etc. For the entities that belong
to the CPU, e.g. threads and thread contexts, they wrap the CPU data
port in a port proxy.

The following replacements are made:
FunctionalPort > PortProxy
TranslatingPort > SETranslatingPortProxy
VirtualPort > FSTranslatingPortProxy