mem: Allow packet to provide its own addr range

Add a getter to Packet to allow it to provide its own addr
range.

Change-Id: I2128ea3b71906502d10d9376b050a62407defd23
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17536
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem: Use address range to find the right physical address

Previously, we used the start address to determine the right physical
memory while servicing memory requests. This change uses the full
address range to correctly determine the right physical memory and
expose bugs where requests might not fully map to a single physical
memory.

Change-Id: I183d7552918106000f917a62ceb877511ff0ff71
Reviewed-on: https://gem5-review.googlesource.com/11118
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem: Use the caching in the AddrRangeMap class in PhysicalMemory

Use it instead of custom implemented caching.

Change-Id: Ie21012a77a3cb6ce57f34f879fa391678913896a
Reviewed-on: https://gem5-review.googlesource.com/5244
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

base, mem: Disambiguate if an addr range is contained or overlaps

We need to determined whether an address range is fully contained or
it overlaps with an address range in the address range in the mmap. As
an example, we use address range maps to associate ports to address
ranges and we determine which port we will forward the request based
on which address range contains the addresses accessed by the
request. We also need to make sure that when we add a new port to the
address range map, its address range does not overlap with any of the
existing ports.

This patch splits the function find() into two functions contains()
and intersects() to implement this distinct functionality. It also
changes the xbar and the physical memory to use the right function.

Change-Id: If3fd3f774a16b27db2df76dc04f1d61824938008
Reviewed-on: https://gem5-review.googlesource.com/11115
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

style: [patch 1/22] use /r/3648/ to reorganize includes

cpu, mem, sim: Change how KVM maps memory

Only map memories into the KVM guest address space that are
marked as usable by KVM. Create BackingStoreEntry class
containing flags for is_conf_reported, in_addr_map, and
kvm_map.

mem: FreeBSD does not provide MAP_NORESERVE either

Like OS X, FreeBSD does not support MAP_NORESERVE.
Handle accordingly and update comment.

Committed by Jason Lowe-Power <power.jg@gmail.com>

style: fix missing spaces in control statements

Result of running 'hg m5style --skip-all --fix-control -a'.

base: Declare a type for context IDs

Context IDs used to be declared as ad hoc (usually as int). This
changeset introduces a typedef for ContextIDs and a constant for
invalid context IDs.

sim: Refactor the serialization base class

Objects that are can be serialized are supposed to inherit from the
Serializable class. This class is meant to provide a unified API for
such objects. However, so far it has mainly been used by SimObjects
due to some fundamental design limitations. This changeset redesigns
to the serialization interface to make it more generic and hide the
underlying checkpoint storage. Specifically:

* Add a set of APIs to serialize into a subsection of the current
object. Previously, objects that needed this functionality would
use ad-hoc solutions using nameOut() and section name
generation. In the new world, an object that implements the
interface has the methods serializeSection() and
unserializeSection() that serialize into a named /subsection/ of
the current object. Calling serialize() serializes an object into
the current section.

* Move the name() method from Serializable to SimObject as it is no
longer needed for serialization. The fully qualified section name
is generated by the main serialization code on the fly as objects
serialize sub-objects.

* Add a scoped ScopedCheckpointSection helper class. Some objects
need to serialize data structures, that are not deriving from
Serializable, into subsections. Previously, this was done using
nameOut() and manual section name generation. To simplify this,
this changeset introduces a ScopedCheckpointSection() helper
class. When this class is instantiated, it adds a new /subsection/
and subsequent serialization calls during the lifetime of this
helper class happen inside this section (or a subsection in case
of nested sections).

* The serialize() call is now const which prevents accidental state
manipulation during serialization. Objects that rely on modifying
state can use the serializeOld() call instead. The default
implementation simply calls serialize(). Note: The old-style calls
need to be explicitly called using the
serializeOld()/serializeSectionOld() style APIs. These are used by
default when serializing SimObjects.

* Both the input and output checkpoints now use their own named
types. This hides underlying checkpoint implementation from
objects that need checkpointing and makes it easier to change the
underlying checkpoint storage code.

mem: mmap the backing store with MAP_NORESERVE

This patch ensures we can run simulations with very large simulated
memories (at least 64 TB based on some quick runs on a Linux
workstation). In essence this allows us to efficiently deal with
sparse address maps without having to implement a redirection layer in
the backing store.

This opens up for run-time errors if we eventually exhausts the hosts
memory and swap space, but this should hopefully never happen.

mem: Use the range cache for lookup as well as access

This patch changes the range cache used in the global physical memory
to be an iterator so that we can use it not only as part of isMemAddr,
but also access and functionalAccess. This matches use-cases where a
core is using the atomic non-caching memory mode, and repeatedly calls
isMemAddr and access.

Linux boot on aarch32, with a single atomic CPU, is now more than 30%
faster when using "--fastmem" compared to not using the direct memory
access.

mem: Modernise PhysicalMemory with C++11 features

Bring the PhysicalMemory up-to-date by making use of range-based for
loops and vector intialisation where possible.

misc: Fix a bunch of minor issues identified by static analysis

Add some missing initialisation, and fix a handful benign resource
leaks (including some false positives).

mem: Rename Bus to XBar to better reflect its behaviour

This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.

As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.

mem: Fix bug in PhysicalMemory use of mmap and munmap

This patch fixes a bug in how physical memory used to be mapped and
unmapped. Previously we unmapped and re-mapped if restoring from a
checkpoint. However, we never checked that the new mapping was
actually the same, it was just magically working as the OS seems to
fairly reliably give us the same chunk back. This patch fixes this
issue by relying entirely on the mmap call in the constructor.

mem: Avoid explicitly zeroing the memory backing store

This patch removes the explicit memset as it is redundant and causes
the simulator to touch the entire space, forcing the host system to
allocate the pages.

Anonymous pages are mapped on the first access, and the page-fault
handler is responsible for zeroing them. Thus, the pages are still
zeroed, but we avoid touching the entire allocated space which enables
us to use much larger memory sizes as long as not all the memory is
actually used.

mem: Merge interleaved ranges when creating backing store

This patch adds merging of interleaved ranges before creating the
backing stores. The backing stores are always a contigous chunk of the
address space, and with this patch it is possible to have interleaved
memories in the system.

mem: Merge ranges that are part of the conf table

This patch adds basic merging of address ranges when determining which
address ranges should be reported in the configuration table. By
performing this merging it is possible to distribute an address range
across many memory channels (controllers). This is essential to enable
address interleaving.

mem: Add interleaving bits to the address ranges

This patch adds support for interleaving bits for the address
ranges. What was previously just a start and end address, now has an
additional three fields, for the high bit, and number of bits to use
for interleaving, and a match value to compare against. If the number
of interleaving bits is set to zero it is effectively disabled.

A number of convenience functions are added to the range to enquire
about the interleaving, its granularity and the number of stripes it
is part of.

base: Simplify the AddrRangeMap by removing unused code

This patch cleans up the AddrRangeMap in preparation for the addition
of interleaving by removing unused code. The non-const editions of
find are never used, and hence the duplication is not needed.

base: Encapsulate the underlying fields in AddrRange

This patch makes the start and end address private in a move to
prevent direct manipulation and matching of ranges based on these
fields. This is done so that a transition to ranges with interleaving
support is possible.

As a result of hiding the start and end, a number of member functions
are needed to perform the comparisons and manipulations that
previously took place directly on the members. An accessor function is
provided for the start address, and a function is added to test if an
address is within a range. As a result of the latter the != and ==
operator is also removed in favour of the member function. A member
function that returns a string representation is also created to allow
debug printing.

In general, this patch does not add any functionality, but it does
take us closer to a situation where interleaving (and more cleverness)
can be added under the bonnet without exposing it to the user. More on
that in a later patch.

mem: Remove the joining of neighbouring ranges

This patch temporarily removes the joining of ranges when creating the
backing store, to reserve this functionality for the interleaved
ranges that are about to be introduced.

When creating the mmaps for the backing store, there is no point in
creating larger contigous chunks that what is necessary. The larger
chunks will only make life more difficult for the host.

Merging will be re-added later, but then only for interleaved ranges.

mem: Fix a bug in the memory serialization file naming

This patch fixes a bug that caused multiple systems to overwrite each
other physical memory. The system name is now included in the filename
such that this is avoided.

sim: have a curTick per eventq
This patch adds a _curTick variable to an eventq. This variable is updated
whenever an event is serviced in function serviceOne(), or all events upto
a particular time are processed in function serviceEvents(). This change
helps when there are eventqs that do not make use of curTick for scheduling
events.

Mem: Separate the host and guest views of memory backing store

This patch moves all the memory backing store operations from the
independent memory controllers to the global physical memory. The main
reason for this patch is to allow address striping in a future set of
patches, but at this point it already provides some useful
functionality in that it is now possible to change the number of
memory controllers and their address mapping in combination with
checkpointing. Thus, the host and guest view of the memory backing
store are now completely separate.

With this patch, the individual memory controllers are far simpler as
all responsibility for serializing/unserializing is moved to the
physical memory. Currently, the functionality is more or less moved
from AbstractMemory to PhysicalMemory without any major
changes. However, in a future patch the physical memory will also
resolve any ranges that are interleaved and properly assign the
backing store to the memory controllers, and keep the host memory as a
single contigous chunk per address range.

Functionality for future extensions which involve CPU virtualization
also enable the host to get pointers to the backing store.

AddrRange: Transition from Range<T> to AddrRange

This patch takes the final plunge and transitions from the templated
Range class to the more specific AddrRange. In doing so it changes the
obvious Range<Addr> to AddrRange, and also bumps the range_map to be
AddrRangeMap.

In addition to the obvious changes, including the removal of redundant
includes, this patch also does some house keeping in preparing for the
introduction of address interleaving support in the ranges. The Range
class is also stripped of all the functionality that is never used.

MEM: Enable multiple distributed generalized memories

This patch removes the assumption on having on single instance of
PhysicalMemory, and enables a distributed memory where the individual
memories in the system are each responsible for a single contiguous
address range.

All memories inherit from an AbstractMemory that encompasses the basic
behaviuor of a random access memory, and provides untimed access
methods. What was previously called PhysicalMemory is now
SimpleMemory, and a subclass of AbstractMemory. All future types of
memory controllers should inherit from AbstractMemory.

To enable e.g. the atomic CPU and RubyPort to access the now
distributed memory, the system has a wrapper class, called
PhysicalMemory that is aware of all the memories in the system and
their associated address ranges. This class thus acts as an
infinitely-fast bus and performs address decoding for these "shortcut"
accesses. Each memory can specify that it should not be part of the
global address map (used e.g. by the functional memories by some
testers). Moreover, each memory can be configured to be reported to
the OS configuration table, useful for populating ATAG structures, and
any potential ACPI tables.

Checkpointing support currently assumes that all memories have the
same size and organisation when creating and resuming from the
checkpoint. A future patch will enable a more flexible
re-organisation.

Ruby: Remove the physMemPort and instead access memory directly

This patch removes the physMemPort from the RubySequencer and instead
uses the system pointer to access the physmem. The system already
keeps track of the physmem and the valid memory address ranges, and
with this patch we merely make use of that existing functionality. The
memory is modified so that it is possible to call the access functions
(atomic and functional) without going through the port, and the memory
is allowed to be unconnected, i.e. have no ports (since Ruby does not
attach it like the conventional memory system).

MEM: Introduce the master/slave port sub-classes in C++

This patch introduces the notion of a master and slave port in the C++
code, thus bringing the previous classification from the Python
classes into the corresponding simulation objects and memory objects.

The patch enables us to classify behaviours into the two bins and add
assumptions and enfore compliance, also simplifying the two
interfaces. As a starting point, isSnooping is confined to a master
port, and getAddrRanges to slave ports. More of these specilisations
are to come in later patches.

The getPort function is not getMasterPort and getSlavePort, and
returns a port reference rather than a pointer as NULL would never be
a valid return value. The default implementation of these two
functions is placed in MemObject, and calls fatal.

The one drawback with this specific patch is that it requires some
code duplication, e.g. QueuedPort becomes QueuedMasterPort and
QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort
(avoiding multiple inheritance). With the later introduction of the
port interfaces, moving the functionality outside the port itself, a
lot of the duplicated code will disappear again.

MEM: Split SimpleTimingPort into PacketQueue and ports

This patch decouples the queueing and the port interactions to
simplify the introduction of the master and slave ports. By separating
the queueing functionality from the port itself, it becomes much
easier to distinguish between master and slave ports, and still retain
the queueing ability for both (without code duplication).

As part of the split into a PacketQueue and a port, there is now also
a hierarchy of two port classes, QueuedPort and SimpleTimingPort. The
QueuedPort is useful for ports that want to leave the packet
transmission of outgoing packets to the queue and is used by both
master and slave ports. The SimpleTimingPort inherits from the
QueuedPort and adds the implemention of recvTiming and recvFunctional
through recvAtomic.

The PioPort and MessagePort are cleaned up as part of the changes.

MEM: Move port creation to the memory object(s) construction

This patch moves all port creation from the getPort method to be
consistently done in the MemObject's constructor. This is possible
thanks to the Swig interface passing the length of the vector ports.
Previously there was a mix of: 1) creating the ports as members (at
object construction time) and using getPort for the name resolution,
or 2) dynamically creating the ports in the getPort call. This is now
uniform. Furthermore, objects that would not be complete without a
port have these ports as members rather than having pointers to
dynamically allocated ports.

This patch also enables an elaboration-time enumeration of all the
ports in the system which can be used to determine the masterId.

Merge with the main repo.

Merge with the main repository again.

SE/FS: Get rid of includes of config/full_system.hh.

Mem: Add simple bandwidth stats to PhysicalMemory

MEM: Remove the functional ports from the memory system

The functional ports are no longer used and this patch cleans up the
legacy that is still present in buses, memories, CPUs etc. Note that
this does not refer to the class FunctionalPort (already removed), but
rather ports with the name (and use) functional.

MEM: Separate queries for snooping and address ranges

This patch simplifies the address-range determination mechanism and
also unifies the naming across ports and devices. It further splits
the queries for determining if a port is snooping and what address
ranges it responds to (aiming towards a separation of
cache-maintenance ports and pure memory-mapped ports). Default
behaviours are such that most ports do not have to define isSnooping,
and master ports need not implement getAddrRanges.

physmem: Improved fatal message for size mismatch

Mem: Use sysconf to get the page size instead of the PAGE_SIZE macro.

trace: reimplement the DTRACE function so it doesn't use a vector
At the same time, rename the trace flags to debug flags since they
have broader usage than simply tracing. This means that
--trace-flags is now --debug-flags and --trace-help is now --debug-help

includes: sort all includes

Spelling: Fix the a spelling error by changing mmaped to mmapped.

There may not be a formally correct spelling for the past tense of mmap, but
mmapped is the spelling Google doesn't try to autocorrect. This makes sense
because it mirrors the past tense of map->mapped and not the past tense of
cape->caped.

Mem: Print out memory when access > 8 bytes

Includes: Don't include isa_traits.hh and use the TheISA namespace unless really needed.

SE: Fix simulating more than 4GB of RAM in SE mode

This change removes some dead code in PhysicalMemory, uses a 64 bit type
for the page pointer in System (instead of 32 bit) and cleans up some style.

ARM: Add checkpointing support

Mem: Finish half-baked support for mmaping file in physmem.

Physmem has a parameter to be able to mem map a file, however
it isn't actually used. This changeset utilizes the parameter
so a file can be mmapped.

util: do checkpoint aggregation more cleanly, fix last changeset.
1) Move alpha-specific code out of page_table.cc:serialize().
2) Begin serializing M5_pid and unserializing it, but adding an function to do optional paramIn so that old checkpoints don't need to be fixed up.
3) Fix up alpha startup code so that the unserialized M5_pid value is properly written to DTB_IPR_ASN.
4) Fix the memory unserialize that I forgot somehow in the last changeset.
5) Add in an agg_se.py to handle aggregated checkpoints. --bench foo-bar plus positional arguments foo bar are the only changes in usage from se.py.
Note this aggregation stuff has only been tested for Alpha and nothing else, though it should take a very minimal amount of work to get it to work with another ISA.

build: fix compile problems pointed out by gcc 4.4

arch: nuke arch/isa_specific.hh and move stuff to generated config/the_isa.hh

Fix setting of INST_FETCH flag for O3 CPU.
It's still broken in inorder.
Also enhance DPRINTFs in cache and physical memory so we
can see more easily whether it's getting set or not.

Registers: Add a registers.hh file as an ISA switched header.
This file is for register indices, Num* constants, and register types.
copyRegs and copyMiscRegs were moved to utility.hh and utility.cc.

types: clean up types, especially signed vs unsigned

includes: sort includes again

types: Move stuff for global types into src/base/types.hh

Mem: Change isLlsc to isLLSC.

Memory: Rename LOCKED for load locked store conditional to LLSC.

Add in Context IDs to the simulator. From now on, cpuId is almost never used,
the primary identifier for a hardware context should be contextId(). The
concept of threads within a CPU remains, in the form of threadId() because
sometimes you need to know which context within a cpu to manipulate.

eventq: convert all usage of events to use the new API.
For now, there is still a single global event queue, but this is
necessary for making the steps towards a parallelized m5.

physmem: Add a null option to physical memory so it doesn't store data.

PhysicalMemory: Add parameter for variance in memory delay.

Additional comments and helper functions for PrintReq.

Add functional PrintReq command for memory-system debugging.

Memory: Cache the physical memory start and size so we don't need a dynamic cast on every access.

remove unnecessary debug messages I added

Add in files from merge-bare-iron, get them compiling in FS and SE mode

memory system: fix functional access bug.
Make sure not to keep processing functional accesses
after they've been responded to.
Also use checkFunctional() return value instead of checking
packet command field where possible, mostly just for consistency.

Merge python and x86 changes with cache branch

Get rid of Packet result field. Error responses are
now encoded in cmd field.

Major changes to how SimObjects are created and initialized. Almost all
creation and initialization now happens in python. Parameter objects
are generated and initialized by python. The .ini file is now solely for
debugging purposes and is not used in construction of the objects in any
way.

More major reorg of cache. Seems to work for atomic mode now,
timing mode still broken.

configs/example/memtest.py:
Revamp options.
src/cpu/memtest/memtest.cc:
No need for memory initialization.
No need to make atomic response... memory system should do that now.
src/cpu/memtest/memtest.hh:
MemTest really doesn't want to snoop.
src/mem/bridge.cc:
checkFunctional() cleanup.
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/cache/base_cache.cc:
src/mem/cache/base_cache.hh:
src/mem/cache/cache.cc:
src/mem/cache/cache.hh:
src/mem/cache/cache_blk.hh:
src/mem/cache/cache_builder.cc:
src/mem/cache/cache_impl.hh:
src/mem/cache/coherence/coherence_protocol.cc:
src/mem/cache/coherence/coherence_protocol.hh:
src/mem/cache/coherence/simple_coherence.hh:
src/mem/cache/miss/SConscript:
src/mem/cache/miss/mshr.cc:
src/mem/cache/miss/mshr.hh:
src/mem/cache/miss/mshr_queue.cc:
src/mem/cache/miss/mshr_queue.hh:
src/mem/cache/prefetch/base_prefetcher.cc:
src/mem/cache/tags/fa_lru.cc:
src/mem/cache/tags/fa_lru.hh:
src/mem/cache/tags/iic.cc:
src/mem/cache/tags/iic.hh:
src/mem/cache/tags/lru.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/split.cc:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_lifo.cc:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.cc:
src/mem/cache/tags/split_lru.hh:
src/mem/packet.cc:
src/mem/packet.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/tport.cc:
More major reorg. Seems to work for atomic mode now,
timing mode still broken.

Restructure SimpleTimingPort a bit:
- factor out checkFunctional() code so it can be
called from derived classes
- use EventWrapper for sendEvent, move event handling
code from event to port where it belongs
- make sendEvent a pointer so derived classes can
override it
- replace std::pair with new class for readability

Change getDeviceAddressRanges to use bool for snoop arg.

Insist that PhysicalMemory object have at least one connection.

Oops... some places in C++ explicitly ask for a "functional"
port. It would be better to move this to python IMO but for
now I'll stick in a compatibility hack.

PhysicalMemory has vector of uniform ports instead of one special one.

configs/example/memtest.py:
PhysicalMemory has vector of uniform ports instead of one special one.
Other updates to fix obsolete brokenness.
src/mem/physical.cc:
src/mem/physical.hh:
src/python/m5/objects/PhysicalMemory.py:
Have vector of uniform ports instead of one special one.
src/python/swig/pyobject.cc:
Add comment.

some forgotten commits

rename store conditional stuff as extra data so it can be used for conditional swaps as well
Add support for a twin 64 bit int load
Add Memory barrier and write barrier flags as appropriate
Make atomic memory ops atomic

src/arch/alpha/isa/mem.isa:
src/arch/alpha/locked_mem.hh:
src/cpu/base_dyn_inst.hh:
src/mem/cache/cache_blk.hh:
src/mem/cache/cache_impl.hh:
rename store conditional stuff as extra data so it can be used for conditional swaps as well
src/arch/alpha/types.hh:
src/arch/mips/types.hh:
src/arch/sparc/types.hh:
add a largest read data type for statically allocating read buffers in atomic simple cpu
src/arch/isa_parser.py:
Add support for a twin 64 bit int load
src/arch/sparc/isa/decoder.isa:
Make atomic memory ops atomic
Add Memory barrier and write barrier flags as appropriate
src/arch/sparc/isa/formats/mem/basicmem.isa:
add post access code block and define a twinload format for twin loads
src/arch/sparc/isa/formats/mem/blockmem.isa:
remove old microcoded twin load coad
src/arch/sparc/isa/formats/mem/mem.isa:
swap.isa replaces the code in loadstore.isa
src/arch/sparc/isa/formats/mem/util.isa:
add a post access code block
src/arch/sparc/isa/includes.isa:
need bigint.hh for Twin64_t
src/arch/sparc/isa/operands.isa:
add a twin 64 int type
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
add support for twinloads
add support for swap and conditional swap instructions
rename store conditional stuff as extra data so it can be used for conditional swaps as well
src/mem/packet.cc:
src/mem/packet.hh:
Add support for atomic swap memory commands
src/mem/packet_access.hh:
Add endian conversion function for Twin64_t type
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
Add support for atomic swap memory commands
Rename sc code to extradata

make our code a little more standards compliant
pretty close to compiling w/ suns compiler

briefly:
add dummy return after panic()/fatal()
split out flags by compiler vendor
include cstring and cmath where appropriate
use std namespace for string ops

SConstruct:
Add code to detect compiler and choose cflags based on detected compiler
Fix zlib check to work with suncc
src/SConscript:
split out flags by compiler vendor
src/arch/sparc/isa/decoder.isa:
use correct namespace for sqrt
src/arch/sparc/isa/formats/basic.isa:
add dummy return around panic
src/arch/sparc/isa/formats/integerop.isa:
use correct namespace for stringops
src/arch/sparc/isa/includes.isa:
include cstring and cmath where appropriate
src/arch/sparc/isa_traits.hh:
remove dangling comma
src/arch/sparc/system.cc:
dummy return to make sun cc front end happy
src/arch/sparc/tlb.cc:
src/base/compression/lzss_compression.cc:
use std namespace for string ops
src/arch/sparc/utility.hh:
no reason to say something is unsigned unsigned int
src/base/compression/null_compression.hh:
dummy returns to for suncc front end
src/base/cprintf.hh:
use standard variadic argument syntax instead of gnuc specefic renaming
src/base/hashmap.hh:
don't need to define hash for suncc
src/base/hostinfo.cc:
need stdio.h for sprintf
src/base/loader/object_file.cc:
munmap is in std namespace not null
src/base/misc.hh:
use M5 generic noreturn macros
use standard variadic macro __VA_ARGS__
src/base/pollevent.cc:
we need file.h for file flags
src/base/random.cc:
mess with include files to make suncc happy
src/base/remote_gdb.cc:
malloc memory for function instead of having a non-constant in an array size
src/base/statistics.hh:
use std namespace for floor
src/base/stats/text.cc:
include math.h for rint (cmath won't work)
src/base/time.cc:
use suncc version of ctime_r
src/base/time.hh:
change macro to work with both gcc and suncc
src/base/timebuf.hh:
include cstring from memset and use std::
src/base/trace.hh:
change variadic macros to be normal format
src/cpu/SConscript:
add dummy returns where appropriate
src/cpu/activity.cc:
include cstring for memset
src/cpu/exetrace.hh:
include cstring fro memcpy
src/cpu/simple/base.hh:
add dummy return for panic
src/dev/baddev.cc:
src/dev/pciconfigall.cc:
src/dev/platform.cc:
src/dev/sparc/t1000.cc:
add dummy return where appropriate
src/dev/ide_atareg.h:
make define work for both gnuc and suncc
src/dev/io_device.hh:
add dummy returns where approirate
src/dev/pcidev.hh:
src/mem/cache/cache_impl.hh:
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.hh:
src/mem/dram.cc:
src/mem/packet.cc:
src/mem/port.cc:
include cstring for string ops
src/dev/sparc/mm_disk.cc:
add dummy return where appropriate
include cstring for string ops
src/mem/cache/miss/blocking_buffer.hh:
src/mem/port.hh:
Add dummy return where appropriate
src/mem/cache/tags/iic.cc:
cast hastSets to double for log() call
src/mem/physical.cc:
cast pmemAddr to char* for munmap
src/sim/byteswap.hh:
make define work for suncc and gnuc

Change MemoryAccess dprintfs to print the data as well

Added a parameter to set memory to zero. This is to support Legion, and once we can make our own hypervisor binary, we probably won't need it.

Fix an assert to correctly make sure a request falls entirely inside a memory.

Physical memory overrides the tport version of recvFunctional, need to do the
check here for responses that match as well

Get SPARC to the point that it starts running. Add ability to load the ROM bin files, cleanup lockstep printing a bit
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.

SConstruct:
Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
add option to try raw when nothing works
src/cpu/exetrace.cc:
cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
change the instruction to be 32 bits because it is
src/mem/physical.cc:
fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
add the ability to add Addr() together

Use PacketPtr everywhere

refactor code for the packet, get rid of packet_impl.hh
and call it packet_access.hh and fix the #includes so
things compile right.

Fix problems with unCacheable addresses in timing-coherence

src/base/traceflags.py:
src/mem/physical.cc:
Add debug falgs fro physical memory accesses
src/mem/cache/cache_impl.hh:
Snoops to uncacheable blocks should not happen
src/mem/cache/miss/miss_queue.cc:
Set the size properly on unCacheable accesses

Merge ktlim@zizzer:/bk/newmem
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem

src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/simple/timing.hh:
tests/configs/o3-timing-mp.py:
Hand merge.

Update memory assertion to check for whole range.

src/mem/physical.cc:
Update assertion to check for full range.

Make memtest work with 8 memtesters

src/mem/physical.cc:
Update comment to match memtest use
src/python/m5/objects/PhysicalMemory.py:
Make memtester have a way to connect functionally
tests/configs/memtest.py:
Properly create 8 memtesters and connect them to the memory system

Only respond if the pkt needs a response.
Fix an issue with memory handling writebacks.

src/mem/cache/base_cache.hh:
src/mem/tport.cc:
Only respond if the pkt needs a response.
src/mem/physical.cc:
Make physical memory respond to writebacks, set satisfied for invalidates/upgrades.

Implement Alpha LL/SC support for SimpleCPU (Atomic & Timing)
and PhysicalMemory. *No* support for caches or O3CPU.
Note that properly setting cpu_id on all CPUs is now required
for correct operation.

src/arch/SConscript:
src/base/traceflags.py:
src/cpu/base.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
src/python/m5/objects/BaseCPU.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
Implement Alpha LL/SC support for SimpleCPU (Atomic & Timing)
and PhysicalMemory. *No* support for caches or O3CPU.

Move more common functionality into SimpleTimingPort,
allowing derived classes to be simplified.

DRAM Memory doesn't crash the simulator now.. still untested.

Fix Physical Memory to allow memory sizes bigger than 128MB.
Kinda port DRAM to new memory system. The code is *really* ugly (not my fault) and right now something about the stats it uses
causes a simulator segfault.

src/SConscript:
Add dram.cc to sconscript
src/mem/physical.cc:
src/mem/physical.hh:
Add params struct to physical memory, use params, make latency function be virtual
src/python/m5/objects/PhysicalMemory.py:
Add DRAMMemory python class

Move PioPort timing code into Simple Timing Port object
Make PioPort use it
Make Physical memory use it as well

src/SConscript:
Add timing port to sconscript
src/dev/io_device.cc:
src/dev/io_device.hh:
Move simple timing pio port stuff into a simple timing port class so it can be used by the physical memory
src/mem/physical.cc:
src/mem/physical.hh:
use a simple timing port stuff instead of rolling our own here

Move SimObject creation and Port connection loops
into Python.
Add Port and VectorPort objects and support for
specifying port connections via assignment.
The whole C++ ConfigNode hierarchy is gone now, as are
C++ Connector objects.

configs/test/fs.py:
configs/test/test.py:
Rewrite for new port connector syntax.
src/SConscript:
Remove unneeded files:
- mem/connector.*
- sim/config*
src/dev/io_device.hh:
src/mem/bridge.cc:
src/mem/bridge.hh:
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/mem_object.hh:
src/mem/physical.cc:
src/mem/physical.hh:
Allow getPort() to take an optional index to
support vector ports (eventually).
src/python/m5/__init__.py:
Move SimObject construction and port connection
operations into Python (with C++ calls).
src/python/m5/config.py:
Move SimObject construction and port connection
operations into Python (with C++ calls).
Add support for declaring and connecting MemObject
ports in Python.
src/python/m5/objects/Bus.py:
src/python/m5/objects/PhysicalMemory.py:
Add port declaration.
src/sim/builder.cc:
src/sim/builder.hh:
src/sim/serialize.cc:
src/sim/serialize.hh:
ConfigNodes are gone; builder just gets the
name of a .ini file section now.
src/sim/main.cc:
Move SimObject construction and port connection
operations into Python (with C++ calls).
Split remaining initialization operations into two parts,
loadIniFile() and finalInit().
src/sim/param.cc:
src/sim/param.hh:
SimObject resolution done globally in Python now
(not via ConfigNode hierarchy).
src/sim/sim_object.cc:
Remove unneeded #include.

Updated Authors from bk prs info

Minor further cleanup & commenting of Packet class.

src/cpu/simple/atomic.cc:
Make common ifetch setup based on Request rather than Packet.
Packet::reset() no longer a separate function.
sendAtomic() returns latency, not absolute tick.
src/cpu/simple/atomic.hh:
sendAtomic returns latency, not absolute tick.
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
Make common ifetch setup based on Request rather than Packet.
src/dev/alpha_console.cc:
src/dev/ide_ctrl.cc:
src/dev/io_device.cc:
src/dev/isa_fake.cc:
src/dev/ns_gige.cc:
src/dev/pciconfigall.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/dev/tsunami_io.cc:
src/dev/tsunami_pchip.cc:
src/dev/uart8250.cc:
src/mem/physical.cc:
Get rid of redundant Packet time field.
src/mem/packet.cc:
Eliminate reset() method.
src/mem/packet.hh:
Fold reset() function into reinitFromRequest()... it was
only ever called together with that function.
Get rid of redundant time field.
Cleanup/add comments.
src/mem/port.hh:
Document in comment that sendAtomic returns latency, not absolute tick.

Significant rework of Packet class interface:
- new constructor guarantees initialization of most fields
- flags track status of non-guaranteed fields (addr, size, src)
- accessor functions (getAddr() etc.) check status on access
- Command & Result classes are nested in Packet class scope
- Command now built from vector of behavior bits
- string version of Command for tracing
- reinitFromRequest() and makeTimingResponse() encapsulate
common manipulations of existing packets

src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/timing.cc:
src/dev/alpha_console.cc:
src/dev/ide_ctrl.cc:
src/dev/io_device.cc:
src/dev/io_device.hh:
src/dev/isa_fake.cc:
src/dev/ns_gige.cc:
src/dev/pciconfigall.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/dev/tsunami_io.cc:
src/dev/tsunami_pchip.cc:
src/dev/uart8250.cc:
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/physical.cc:
src/mem/port.cc:
src/mem/port.hh:
src/mem/request.hh:
Update for new Packet interface.

Add names to memory Port objects for tracing.

Minor fixes for full-system timing memory.
Need to rewrite bus bridge to get any further.

src/dev/io_device.cc:
Set packet dest on timing responses.
src/mem/bus.cc:
Fix dest addr bounds check assertion.
Add assertion to catch infinite loopbacks.
src/mem/physical.cc:
Add comment.

New directory structure:
- simulator source now in 'src' subdirectory
- imported files from 'ext' repository
- support building in arbitrary places, including
outside of the source tree. See comment at top
of SConstruct file for more details.
Regression tests are temporarily disabled; that
syetem needs more extensive revisions.

SConstruct:
Update for new directory structure.
Modify to support build trees that are not subdirectories
of the source tree. See comment at top of file for
more details.
Regression tests are temporarily disabled.
src/arch/SConscript:
src/arch/isa_parser.py:
src/python/SConscript:
Update for new directory structure.