dev-arm: Add resetHppi method in the GICv3 cpu interface

The method is used for resetting the highest priority pending interrupt
interrupt from the cpu interface if it matches the intid passed as an
argument.

Change-Id: I9fbc4cb3e05a1cc32f853b6afab5c2bc99369435
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20637
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Cleanup GICv3 initialization

This patch is removing the unnecessary initState() / reset() methods
from GICv3 classes, since we can initialize everything at
construction/init time

Change-Id: Ia70edcc4ca4f11878fac0024342e4f2cd81883a0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20636
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Writes to IGRPEN1_EL3 triggering update

Change-Id: I56804eb1bfc8913bd0d3cab05865a382bf270bc1
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20634
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Fix mapping between IGRPEN1_EL3 and IGRPEN1_EL1

Previous mapping was wrong because it was checking which security bits
it was accessing by using the inSecureState() function, whereas it
should have used the isSecureBelowEL3(). This patch is not making the
sostitution since it is optimizing the mapping furthermore by avoiding
updating both IGRPEN1_EL1 and IGRPEN1_EL3 on writes. The IGRPEN1_EL1
register is used as a storage, and any reads/writes to IGRPEN1_EL3 is
routed to that register.

Change-Id: Id318ec44e19d4f844e4e3410d74d0c4f89810811
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20632
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: State update when setting MISCREG_ICC_IGRPENx register

This is because by enabling ainterrupt group at the cpu interface, we
need to check if a previously pending interrupt needs to be forwarded to
the PE.
We are doing the same when globally enabling irqs in the distributor
(GICD_CTLR).

Change-Id: I80aeb87b2a58a108de899006d5a2f12eadbe6c2e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20629
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, dev-arm: MISCREG_ICC_IGRPEN1_EL1 using AA64 banking

Change-Id: Ic08ac1e7f3ebef408a83aa068ce15e9dfe2aa3cd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20628
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, dev-arm: MISCREG_ICC_AP1R0_EL1 using AA64 banking

Change-Id: Ide93464f62288fbe8f409f718487a15512c01295
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20627
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, dev-arm: MISCREG_ICC_CTLR_EL1 using AA64 banking

Change-Id: Ib1691f1cba08251a36ceb959849b61c33cc3e93b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20626
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add read/writeBanked helpers to GICv3

These will be used by AA64 security banked registers in GICv3.

Change-Id: Ia980c4f5c14187ab9c18da1d1d596562644111ae
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20624
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Rewrite ICC_BPR0/ICC_BPR1 handling

The patch is fixing BPR reads in AA32, by removing the line

Gicv3::GroupId group =
misc_reg == MISCREG_ICC_BPR0_EL1 ? Gicv3::G0S : Gicv3::G1S;

Where a read to ICC_BPR0 will return a G1S group.
The patch is also fixing Security banking accesses.

Change-Id: I28f1d1244c44d4b8b202d3141f8380943c7c1c86
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20620
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add GICv3 unimplemented Hyp Active Priorities Group regs

ICH_APxR1, ICH_APxR2, ICH_APxR3 are implemented only if supporting more
than 6 bits of priority. Since this is not the case, they are currently
unimplemented.
According to spec, unimplemented registers are RAZ/WI.

Change-Id: Ifd7f7a3d42b4575c2f7aff3b95d5a47ac1e61842
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20619
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Cpu interface groupEnabled check for global enable

Gicv3CPUInterface::groupEnabled should check for global enable flags at
distributor level:
- Gicv3Distributor.EnableGrp0
- Gicv3Distributor.EnableGrp1S
- Gicv3Distributor.EnableGrp1NS

Change-Id: I1c855b0e4c2bc8f1cd0a8f086b9450f516177b08
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20617
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Check if INTID group is enabled when reading HPPIRx

If it is not enabled, it should return INTID_SPOURIOUS

Change-Id: I4dfa8b9fcea874b4d281cd154dd38752b05e1d59
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20616
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Rewrite GICv3 update

The GICv3 update methods are method which are invoked anytime the model
needs to evaluate a change in its state, which most of the time means
managing the state of an interrupt (forwarding it to a PE, deasserting
it, etc).
The way it is currently done is a little bit obscure and doesn't
handle correctly IRQ prioritization.
Example:
An IRQ which is handled by the redistributor (PPI or LPI) was not
competing with any pending interrupts coming from the distributor (SPIs)
once raised by a peripheral.

Also the way the pending state of an interrupt was removed at the
cpu interface level wasn't happening in place where this was actually
happening (E.g. when activating it), but happened with a weird
fullUpdate semantic, where if there was a pending interrupt in a
cpu interface, all cpu interfaces had their pending interrupt (if any)
been disabled.

With this patch, state update always starts at the distributor, and
it goes down until the cpu interface where a Gicv3CPUInterface::update
method selects the winning interrupt coming from distributor/redistributor
to be forwarded to the PE.

Change-Id: I1c517cbc4bf107cc2d7ae7beb2692e3cf5187a40
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20614
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix SGI generation

The patch is fixing the following aspects of SGIs

* The conditons over which an SGI can be forwarded to a PE
* SGIs in AArch32 (see below)

It is in fact refactoring SGI generation under a common method in the
cpu interface. It is abandoning the implicit fallthrough mechanism not
only for cosmetic reasons, but also because checking "misc_reg ==" was
only working if the register was an AArch64 one (e.g.
MISCREG_ICC_SGI0R_EL1) and not the AArch32 counterpart (MISCREG_SGI0R).

Change-Id: I6fedfb80388666f4f1d20f6abef378a9f093aa83
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20610
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Reapply GICv3 changes that were lost during refactoring

The GICv3 code refactoring performed by:

https://gem5-review.googlesource.com/c/public/gem5/+/16484

reverted the following patches

https://gem5-review.googlesource.com/c/public/gem5/+/16544
https://gem5-review.googlesource.com/c/public/gem5/+/16545/3

This commit is reintroducing them

Change-Id: I2c875c11570ed66ec9203449446faca3864c64d6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19229
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Read correct version of ICC_BPR register

Some methods like groupPriorityMask check for the value of binary point
registers. Those registers have a minimum value. Writing to those
register is taking this into account, but the problem with the minimum
value arises when the value is checked before sw is writing to them.
In this case the minimum value won't be considered if the read is
directly forwarded to the ISA class.

Change-Id: Id432a37f1634b02bc478d65c52ffb88323d4bb77
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18598
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Take LPIs into account when interacting with CPUIF regs

Previous code was not handling LPIs when it came to
activation/deactivation of interrupts.

Change-Id: Ie38f83c66afdc42132679d7e2e5823990f1710d0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18595
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Make GICv3 maintenance interrupt an ArmInterrupt

Change-Id: I88e2b72849cdf3f69026c62517303837e7d3d551
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17629
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: cleanup of gicv3 CPU interface code and fixes

Change-Id: I4643140f60da4dc9179b5bfed1e3ddd7c2f23091
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/16484
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev-arm: Set ICV_PMR_EL1-ICH_VMCR_EL2 mapping on reads

Reading ICV_PMR_EL1 should return the value the VMCR_EL2.VPMR bits
which are aliased to the register.

Change-Id: Id3e6dfb196f3726edaa3eddb244765598ed62334
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jan-Peter Larsson <jan-peter.larsson@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16545
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Set ICV_IGRPEN<n>_EL1-ICH_VMCR_EL2 mapping on reads

Reading ICV_IGRPEN<n>_EL1 should return the value of VMCR_EL2.VENG0 and
VMCR_EL2.VENG1 bits.

Change-Id: Ia5d748cf60ba074cccf4c127ac479c5cb881773d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jan-Peter Larsson <jan-peter.larsson@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16544
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: LPI support for GICv3. This doesn't include an ITS model.

Change-Id: Ia2c02cca4f95672d6361fba16201a56e2047ddb7
Reviewed-on: https://gem5-review.googlesource.com/c/16142
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: dev: Replace ArmISA::MiscReg with RegVal in the GIC v3 model.

Other dev code was already switched over. This code was written before
the switch over (or unaware of it), and checked in after.

Change-Id: Ibb9e9e4300d01cc46e4dae668274debc2a4989ba
Reviewed-on: https://gem5-review.googlesource.com/c/15755
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Add a GICv3 model

Change-Id: Ib0067fc743f84ff7be9f12d2fc33ddf63736bdd1
Reviewed-on: https://gem5-review.googlesource.com/c/13436
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>