cpu, mem: Changing AtomicOpFunctor* for unique_ptr<AtomicOpFunctor>

This change is based on modify the way we move the AtomicOpFunctor*
through gem5 in order to mantain proper ownership of the object and
ensuring its destruction when it is no longer used.

Doing that we fix at the same time a memory leak in Request.hh
where we were assigning a new AtomicOpFunctor* without destroying the
previous one.

This change creates a new type AtomicOpFunctor_ptr as a
std::unique_ptr<AtomicOpFunctor> and move its ownership as needed. Except
for its only usage when AtomicOpFunc() is called.

Change-Id: Ic516f9d8217cb1ae1f0a19500e5da0336da9fd4f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20919
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Move O3's data port into the LSQ.

That's where it's used, and putting it there avoids having to pass
around the port using the top level getDataPort function.

Change-Id: I0dea25d0c5f4bb3f58a6574a8f2b2d242784caf2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20238
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu-o3: added _amo_op parameter in o3 LSQ

Fix bug with AMO (or RMW) instructions where the amo_op variable
is not being propagated to the LSQ request.

Change-Id: I60c59641d9b497051376f638e27f3c4cc361f615
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19814
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>

cpu-o3: Fix too strict assert condition in writeback()

The assert() in the LSQ writeback() only allowed ReExec faults.
However, a SplitRequest which completed the translation in
PartialFault state (i.e. any but the very first cacheline
translation failed) may end up here. The assert() condition is
extended accordingly.

The patch also removes the superfluous/unused Complete/Squashed
states from the LSQ request. (The completion of the request is
recorded in the flags still.)

Change-Id: Ie575f4d3b4d5295585828ad8c7d3f4c7c1fe15d0
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19174
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu: Add first-/non-faulting load support to Minor and O3

Some architectures allow masking faults of memory load instructions in
some specific circumstances (e.g. first-faulting and non-faulting
loads in Arm SVE). This patch adds support for such loads in the Minor
and O3 CPU models.

Change-Id: I264a81a078f049127779aa834e89f0e693ba0bea
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19178
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu,mem: Add support for partial loads/stores and wide mem. accesses

This changeset adds support for partial (or masked) loads/stores, i.e.
loads/stores that can disable accesses to individual bytes within the
target address range. In addition, this changeset extends the code to
crack memory accesses across most CPU models (TimingSimpleCPU still
TBD), so that arbitrarily wide memory accesses are supported. These
changes are required for supporting ISAs with wide vectors.

Additional authors:
- Gabor Dozsa <gabor.dozsa@arm.com>
- Tiago Muck <tiago.muck@arm.com>

Change-Id: Ibad33541c258ad72925c0b1d5abc3e5e8bf92d92
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13518
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

cpu-o3: Add cache read ports limit to LSQ

This change introduces cache read ports to limit the number of
per-cycle loads. Previously only the number of per-cycle stores
could be limited.

Change-Id: I39bbd984056c5a696725ee2db462a55b2079e2d4
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13517
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: support atomic memory request type with AtomicOpFunctor

This patch enables all 4 CPU models (AtomicSimpleCPU, TimingSimpleCPU,
MinorCPU and DerivO3CPU) to issue atomic memory (AMO) requests to memory
system.

Atomic memory instruction is treated as a special store instruction in
all CPU models.

In simple CPUs, an AMO request with an associated AtomicOpFunctor is
simply sent to L1 dcache.

In MinorCPU, an AMO request bypasses store buffer and waits for any
conflicting store request(s) currently in the store buffer to retire
before the AMO request is sent to the cache. AMO requests are not buffered
in the store buffer, so their effects appear immediately in the cache.

In DerivO3CPU, an AMO request is inserted in the store buffer so that it
is delivered to the cache only after all previous stores are issued to
the cache. Data forwarding between between an outstanding AMO in the
store buffer and a subsequent load is not allowed since the AMO request
does not hold valid data until it's executed in the cache.

This implementation assumes that a target ISA implementation must insert
enough memory fences as micro-ops around an atomic instruction to
enforce a correct order of memory instructions with respect to its
memory consistency model. Without extra memory fences, this implementation
can allow AMOs and other memory instructions that do not conflict
(i.e., not target the same address) to reorder.

This implementation also assumes that atomic instructions execute within
a cache line boundary since the cache for now is not able to execute an
operation on two different cache lines in one single step. Therefore,
ISAs like x86 that require multi-cache-line atomic instructions need to
either use a pair of locking load and unlocking store or change the
cache implementation to guarantee the atomicity of an atomic
instruction.

Change-Id: Ib8a7c81868ac05b98d73afc7d16eb88486f8cf9a
Reviewed-on: https://gem5-review.googlesource.com/c/8188
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

misc: added missing override specifier

Added missing specifier for various virtual functions.

Change-Id: I4783e92d78789a9ae182fad79aadceafb00b2458
Reviewed-on: https://gem5-review.googlesource.com/c/16103
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu-o3: O3 LSQ Generalisation

This patch does a large modification of the LSQ in the O3 model. The
main goal of the patch is to remove the 'an operation can be served with
one or two memory requests' assumption that is present in the LSQ
and the instruction with the req, reqLow, reqHigh triplet, and
generalising it to operations that can be addressed with one request,
and operations that require many requests, embodied in the
SingleDataRequest and the SplitDataRequest.

This modification has been done mimicking the minor model to an extent,
shifting the responsibilities of dealing with VtoP translation and
tracking the status and resources from the DynInst to the LSQ via the
LSQRequest. The LSQRequest models the information concerning the
operation, handles the creation of fragments for translation and request
as well as assembling/splitting the data accordingly.

With this modifications, the implementation of vector ISAs, particularly
on the memory side, become more rich, as the new model permits a
dissociation of the ISA characteristics as vector length, from the
microarchitectural characteristics that govern how contiguous loads are
executing, allowing exploration of different LSQ to DL1 bus widths to
understand the tradeoffs in complexity and performance.

Part of the complexities introduced stem from the fact that gem5 keeps a
large amount of metadata regarding, in particular, memory operations,
thus, when an instruction is squashed while some operation as TLB lookup
or cache access is ongoing, when the relevant structure communicates to
the LSQ that the operation is over, it tries to access some pieces of
data that should have died when the instruction is squashed, leading to
asserts, panics, or memory corruption. To ensure the correct behaviour,
the LSQRequest rely on assesing who is their owner, and self-destroying
if they detect their owner is done with the request, and there will be
no subsequent action. For example, in the case of an instruction
squashed whal the TLB is doing a walk to serve the translation, when the
translation is served by the TLB, the LSQRequest detects that the
instruction was squashed, and as the translation is done, no one else
expect to access its information, and therefore, it self-destructs.
Having destroyed the LSQRequest earlier, would lead to wrong behaviour
as the TLB walk may access some fields of it.

Additional authors:
- Gabor Dozsa <gabor.dozsa@arm.com>

Change-Id: I9578a1a3f6b899c390cdd886856a24db68ff7d0c
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13516
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

cpu-o3: Make the smtLSQPolicy a Param.ScopedEnum

The smtLSQPolicy is a parameter in the o3 cpu that can have 3
different values. Previously this setting was done through a string
and a parser function would turn it into a c++ enum value. This
changeset turns the string into a python Param.ScopedEnum.

Change-Id: I82041b88bd914c5dc660058d9e3998e3114e7c35
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15397
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu: Change raw pointers to STL Containers

This patch changes two members from being raw pointers to being STL
containers. The reason behind, other than cleanlyness and arguable OO
best practices is that containers have more intronspections capabilities
than naked pointers do, as the size is known.

Using STL containers adds little overhead and eases the automation of
process during debugging (gdb).

Change-Id: I4d9d3eedafa8b5e50ac512ea93b458a4200229f2
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13126
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu: Fix the usage of const DynInstPtr

Summary: Usage of const DynInstPtr& when possible and introduction of
move operators to RefCountingPtr.

In many places, scoped references to dynamic instructions do a copy of
the DynInstPtr when a reference would do. This is detrimental to
performance. On top of that, in case there is a need for reference
tracking for debugging, the redundant copies make the process much more
painful than it already is.

Also, from the theoretical point of view, a function/method that
defines a convenience name to access an instruction should not be
considered an owner of the data, i.e., doing a copy and not a reference
is not justified.

On a related topic, C++11 introduces move semantics, and those are
useful when, for example, there is a class modelling a HW structure that
contains a list, and has a getHeadOfList function, to prevent doing a
copy to an internal variable -> update pointer, remove from the list ->
update pointer, return value making a copy to the assined variable ->
update pointer, destroy the returned value -> update pointer.

Change-Id: I3bb46c20ef23b6873b469fd22befb251ac44d2f6
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13105
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

misc: Using smart pointers for memory Requests

This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.

Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem: Remove threadId from memory request class

In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.

This is a re-spin of 20264eb after the revert (bd1c6789) and includes
some fixes of that commit.

Revert power patch sets with unexpected interactions

The following patches had unexpected interactions with the current
upstream code and have been reverted for now:

e07fd01651f3: power: Add support for power models
831c7f2f9e39: power: Low-power idle power state for idle CPUs
4f749e00b667: power: Add power states to ClockedObject

Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>

mem: Remove threadId from memory request class

In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.

cpu: remove unnecessary data ptr from O3 internal read() funcs

The read() function merely initiates a memory read operation; the
data doesn't arrive until the access completes and a response packet
is received from the memory system. Thus there's no need to provide
a data pointer; its existence is historical.

Getting this pointer out of this internal o3 interface sets the
stage for similar cleanup in the ExecContext interface. Also
found that we were pointlessly setting the contents at this pointer
on a store forward (the useful memcpy happens just a few lines
below the deleted one).

mem: Split port retry for all different packet classes

This patch fixes a long-standing isue with the port flow
control. Before this patch the retry mechanism was shared between all
different packet classes. As a result, a snoop response could get
stuck behind a request waiting for a retry, even if the send/recv
functions were split. This caused message-dependent deadlocks in
stress-test scenarios.

The patch splits the retry into one per packet (message) class. Thus,
sendTimingReq has a corresponding recvReqRetry, sendTimingResp has
recvRespRetry etc. Most of the changes to the code involve simply
clarifying what type of request a specific object was accepting.

The biggest change in functionality is in the cache downstream packet
queue, facing the memory. This queue was shared by requests and snoop
responses, and it is now split into two queues, each with their own
flow control, but the same physical MasterPort. These changes fixes
the previously seen deadlocks.

cpu: Fix cache blocked load behavior in o3 cpu

This patch fixes the load blocked/replay mechanism in the o3 cpu. Rather than
flushing the entire pipeline, this patch replays loads once the cache becomes
unblocked.

Additionally, deferred memory instructions (loads which had conflicting stores),
when replayed would not respect the number of functional units (only respected
issue width). This patch also corrects that.

Improvements over 20% have been observed on a microbenchmark designed to
exercise this behavior.

o3: split load & store queue full cases in rename

Check for free entries in Load Queue and Store Queue separately to
avoid cases when load cannot be renamed due to full Store Queue and
vice versa.

This work was done while Binh was an intern at AMD Research.

cpu: Dynamically instantiate O3 CPU LSQUnits

Previously, the LSQ would instantiate MaxThreads LSQUnits in the body of it's
object, but it would only initialize numThreads LSQUnits as specified by the
user. This had the effect of leaving some LSQUnits uninitialized when the
number of threads was less than MaxThreads, and when adding statistics to the
LSQUnit that must be initialized, this caused the stats initialization check to
fail. By dynamically instantiating LSQUnits, they are all initialized and this
avoids uninitialized LSQUnits from floating around during runtime.

cpu: Rewrite O3 draining to avoid stopping in microcode

Previously, the O3 CPU could stop in the middle of a microcode
sequence. This patch makes sure that the pipeline stops when it has
committed a normal instruction or exited from a microcode
sequence. Additionally, it makes sure that the pipeline has no
instructions in flight when it is drained, which should make draining
more robust.

Draining is controlled in the commit stage, which checks if the next
PC after a committed instruction is in microcode. If this isn't the
case, it requests a squash of all instructions after that the
instruction that just committed and immediately signals a drain stall
to the fetch stage. The CPU then continues to execute until the
pipeline and all associated buffers are empty.

cpu: Fix O3 LSQ debug dumping constness and formatting

o3 cpu: remove some unused buggy functions in the lsq
Committed by: Nilay Vaish <nilay@cs.wisc.edu>

MEM: Separate requests and responses for timing accesses

This patch moves send/recvTiming and send/recvTimingSnoop from the
Port base class to the MasterPort and SlavePort, and also splits them
into separate member functions for requests and responses:
send/recvTimingReq, send/recvTimingResp, and send/recvTimingSnoopReq,
send/recvTimingSnoopResp. A master port sends requests and receives
responses, and also receives snoop requests and sends snoop
responses. A slave port has the reciprocal behaviour as it receives
requests and sends responses, and sends snoop requests and receives
snoop responses.

For all MemObjects that have only master ports or slave ports (but not
both), e.g. a CPU, or a PIO device, this patch merely adds more
clarity to what kind of access is taking place. For example, a CPU
port used to call sendTiming, and will now call
sendTimingReq. Similarly, a response previously came back through
recvTiming, which is now recvTimingResp. For the modules that have
both master and slave ports, e.g. the bus, the behaviour was
previously relying on branches based on pkt->isRequest(), and this is
now replaced with a direct call to the apprioriate member function
depending on the type of access. Please note that send/recvRetry is
still shared by all the timing accessors and remains in the Port base
class for now (to maintain the current bus functionality and avoid
changing the statistics of all regressions).

The packet queue is split into a MasterPort and SlavePort version to
facilitate the use of the new timing accessors. All uses of the
PacketQueue are updated accordingly.

With this patch, the type of packet (request or response) is now well
defined for each type of access, and asserts on pkt->isRequest() and
pkt->isResponse() are now moved to the appropriate send member
functions. It is also worth noting that sendTimingSnoopReq no longer
returns a boolean, as the semantics do not alow snoop requests to be
rejected or stalled. All these assumptions are now excplicitly part of
the port interface itself.

MEM: Separate snoops and normal memory requests/responses

This patch introduces port access methods that separates snoop
request/responses from normal memory request/responses. The
differentiation is made for functional, atomic and timing accesses and
builds on the introduction of master and slave ports.

Before the introduction of this patch, the packets belonging to the
different phases of the protocol (request -> [forwarded snoop request
-> snoop response]* -> response) all use the same port access
functions, even though the snoop packets flow in the opposite
direction to the normal packet. That is, a coherent master sends
normal request and receives responses, but receives snoop requests and
sends snoop responses (vice versa for the slave). These two distinct
phases now use different access functions, as described below.

Starting with the functional access, a master sends a request to a
slave through sendFunctional, and the request packet is turned into a
response before the call returns. In a system without cache coherence,
this is all that is needed from the functional interface. For the
cache-coherent scenario, a slave also sends snoop requests to coherent
masters through sendFunctionalSnoop, with responses returned within
the same packet pointer. This is currently used by the bus and caches,
and the LSQ of the O3 CPU. The send/recvFunctional and
send/recvFunctionalSnoop are moved from the Port super class to the
appropriate subclass.

Atomic accesses follow the same flow as functional accesses, with
request being sent from master to slave through sendAtomic. In the
case of cache-coherent ports, a slave can send snoop requests to a
master through sendAtomicSnoop. Just as for the functional access
methods, the atomic send and receive member functions are moved to the
appropriate subclasses.

The timing access methods are different from the functional and atomic
in that requests and responses are separated in time and
send/recvTiming are used for both directions. Hence, a master uses
sendTiming to send a request to a slave, and a slave uses sendTiming
to send a response back to a master, at a later point in time. Snoop
requests and responses travel in the opposite direction, similar to
what happens in functional and atomic accesses. With the introduction
of this patch, it is possible to determine the direction of packets in
the bus, and no longer necessary to look for both a master and a slave
port with the requested port id.

In contrast to the normal recvFunctional, recvAtomic and recvTiming
that are pure virtual functions, the recvFunctionalSnoop,
recvAtomicSnoop and recvTimingSnoop have a default implementation that
calls panic. This is to allow non-coherent master and slave ports to
not implement these functions.

Merge with head, hopefully the last time for this batch.

Merge with the main repo.

SE/FS: Get rid of includes of config/full_system.hh.

SE/FS: Get rid of FULL_SYSTEM in the CPU directory.

clang: Enable compiling gem5 using clang 2.9 and 3.0

This patch adds the necessary flags to the SConstruct and SConscript
files for compiling using clang 2.9 and later (on Ubuntu et al and OSX
XCode 4.2), and also cleans up a bunch of compiler warnings found by
clang. Most of the warnings are related to hidden virtual functions,
comparisons with unsigneds >= 0, and if-statements with empty
bodies. A number of mismatches between struct and class are also
fixed. clang 2.8 is not working as it has problems with class names
that occur in multiple namespaces (e.g. Statistics in
kernel_stats.hh).

clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which
causes confusion between the container std::set and the function
Packet::set, and this is currently addressed by not including the
entire namespace std, but rather selecting e.g. "using std::vector" in
the appropriate places.

CPU: Moving towards a more general port across CPU models

This patch performs minimal changes to move the instruction and data
ports from specialised subclasses to the base CPU (to the largest
degree possible). Ultimately it servers to make the CPU(s) have a
well-defined interface to the memory sub-system.

MEM: Add port proxies instead of non-structural ports

Port proxies are used to replace non-structural ports, and thus enable
all ports in the system to correspond to a structural entity. This has
the advantage of accessing memory through the normal memory subsystem
and thus allowing any constellation of distributed memories, address
maps, etc. Most accesses are done through the "system port" that is
used for loading binaries, debugging etc. For the entities that belong
to the CPU, e.g. threads and thread contexts, they wrap the CPU data
port in a port proxy.

The following replacements are made:
FunctionalPort > PortProxy
TranslatingPort > SETranslatingPortProxy
VirtualPort > FSTranslatingPortProxy

includes: sort all includes

CPU: Add readBytes and writeBytes functions to the exec contexts.

O3PCU: Split loads and stores that cross cache line boundaries.

When each load or store is sent to the LSQ, we check whether it will cross a
cache line boundary and, if so, split it in two. This creates two TLB
translations and two memory requests. Care has to be taken if the first
packet of a split load is sent but the second blocks the cache. Similarly,
for a store, if the first packet cannot be sent, we must store the second
one somewhere to retry later.

This modifies the LSQSenderState class to record both packets in a split
load or store.

Finally, a new const variable, HasUnalignedMemAcc, is added to each ISA
to indicate whether unaligned memory accesses are allowed. This is used
throughout the changed code so that compiler can optimise away code dealing
with split requests for ISAs that don't need them.

types: add a type for thread IDs and try to use it everywhere

Add in Context IDs to the simulator. From now on, cpuId is almost never used,
the primary identifier for a hardware context should be contextId(). The
concept of threads within a CPU remains, in the form of threadId() because
sometimes you need to know which context within a cpu to manipulate.

eventq: convert all usage of events to use the new API.
For now, there is still a single global event queue, but this is
necessary for making the steps towards a parallelized m5.

params: Convert the CPU objects to use the auto generated param structs.
A whole bunch of stuff has been converted to use the new params stuff, but
the CPU wasn't one of them. While we're at it, make some things a bit
more stylish. Most of the work was done by Gabe, I just cleaned stuff up
a bit more at the end.

Backed out changeset 94a7bb476fca: caused memory leak.

Generate more useful error messages for unconnected ports.
Force all non-default ports to provide a name and an
owner in the constructor.

Change getDeviceAddressRanges to use bool for snoop arg.

Pass ISA-specific O3 CPU as a constructor parameter instead of using setCPU functions.

src/cpu/o3/alpha/cpu_impl.hh:
Pass ISA-specific O3 CPU to FullO3CPU as a constructor parameter instead of using setCPU functions.

Two fixes:
1. Make sure connectMemPorts() only gets called when the CPU's peer gets changed. This is done by making setPeer() virtual, and overriding it in the CPU's ports. When it gets called on a CPU's port (dcache specifically), it calls the normal setPeer() function, and also connectMemPorts().
2. Consolidate redundant code that handles switching in a CPU.

src/cpu/base.cc:
Move common code of switching over peers to base CPU.
src/cpu/base.hh:
Move common code of switching over peers to BaseCPU.
src/cpu/o3/cpu.cc:
Add in function that updates thread context's ports.
Also use updated function to takeOverFrom() in BaseCPU. This gets rid of some repeated code.
src/cpu/o3/cpu.hh:
Include function to update thread context's memory ports.
src/cpu/o3/lsq.hh:
Add function to dcache port that will update the memory ports upon getting a new peer.
Also include a function that will tell the CPU to update those memory ports.
src/cpu/o3/lsq_impl.hh:
Add function that will update the memory ports upon getting a new peer.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Add function that will update thread context's memory ports upon getting a new peer.
Also use the new BaseCPU's take over from function.
src/cpu/simple/atomic.hh:
Add in function (and dcache port) that will allow the dcache to update memory ports when it gets assigned a new peer.
src/cpu/simple/timing.hh:
Add function that will update thread context's memory ports upon getting a new peer.
src/mem/port.hh:
Make setPeer virtual so that other classes can override it.

little fixes i noticed while searching for reason for address range issues (but these weren't the cause of the problem).

RangeSize as a function takes a start address, and a SIZE, and will make the range (start, start+size-1) for you.

src/cpu/memtest/memtest.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/lsq.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.hh:
Fix RangeSize arguments
src/dev/alpha/tsunami_cchip.cc:
src/dev/alpha/tsunami_io.cc:
src/dev/alpha/tsunami_pchip.cc:
src/dev/baddev.cc:
pioSize indicates SIZE, not a mask

Make CPU models signal to update the snoop ranges

Have cpus send snoop ranges

Move Dcache port creation from LSQUnit to LSQ in order to support Ron's recent changes, and using the O3CPU in SMT mode.

src/cpu/o3/lsq.hh:
Update to have LSQ work with only one dcache port for all LSQ Units. LSQ has the dcache port, and the LSQ Units must tell the LSQ if the cache has become blocked.
src/cpu/o3/lsq_impl.hh:
Updates to have the LSQ work with only one dcache port for all LSQUnits.
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
Update for LSQ to create dcache port instead of LSQUnits. Now LSQUnits are given the dcache port from the LSQ, and also must check the LSQ if the cache is blocked prior to accessing the cache.

Support Ron's changes for hooking up ports.

src/cpu/checker/cpu.hh:
Now that BaseCPU is a MemObject, the checker must define this function.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_unit.hh:
Implement getPort function so the connector can connect the ports properly.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
The connector handles connecting the ports now.
src/python/m5/objects/O3CPU.py:
Add ports to the parameters.

Two updates that got combined into one ChangeSet accidentally. They're both pretty simple so they shouldn't cause any trouble.

First: Rename FullCPU and its variants in the o3 directory to O3CPU to differentiate from the old model, and also to specify it's an out of order model.

Second: Include build options for selecting the Checker to be used. These options make sure if the Checker is being used there is a CPU that supports it also being compiled.

SConstruct:
Add in option USE_CHECKER to allow for not compiling in checker code. The checker is enabled through this option instead of through the CPU_MODELS list. However it's still necessary to treat the Checker like a CPU model, so it is appended onto the CPU_MODELS list if enabled.
configs/test/test.py:
Name change for DetailedCPU to DetailedO3CPU. Also include option for max tick.
src/base/traceflags.py:
Add in O3CPU trace flag.
src/cpu/SConscript:
Rename AlphaFullCPU to AlphaO3CPU.

Only include checker sources if they're necessary. Also add a list of CPUs that support the Checker, and only allow the Checker to be compiled in if one of those CPUs are also being included.
src/cpu/base_dyn_inst.cc:
src/cpu/base_dyn_inst.hh:
Rename typedef to ImplCPU instead of FullCPU, to differentiate from the old FullCPU.
src/cpu/cpu_models.py:
src/cpu/o3/alpha_cpu.cc:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_cpu_impl.hh:
Rename AlphaFullCPU to AlphaO3CPU to differentiate from old FullCPU model.
src/cpu/o3/alpha_dyn_inst.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/alpha_impl.hh:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/rename.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
src/cpu/o3/thread_state.hh:
src/python/m5/objects/AlphaO3CPU.py:
Rename FullCPU to O3CPU to differentiate from old FullCPU model.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
Rename FullCPU to O3CPU to differentiate from old FullCPU model.
Also #ifdef the checker code so it doesn't need to be included if it's not selected.

Minor updates for stats.

src/cpu/o3/commit_impl.hh:
src/cpu/o3/fetch.hh:
Update stats comments.
src/cpu/o3/fetch_impl.hh:
Differentiate stats.
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/inst_queue_impl.hh:
Update for stats.
src/cpu/o3/lsq.hh:
LSQ now has stats.
src/cpu/o3/lsq_impl.hh:
Register stats of all LSQ units.
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
Add in stats.

Removing of old code and adding in new comments.

src/cpu/base_dyn_inst.cc:
Clean up old functions, comments.
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/ozone/lsq_unit.hh:
src/cpu/ozone/lsq_unit_impl.hh:
Remove old commented code.
src/cpu/o3/fetch.hh:
Remove old commented code, add in comments.
src/cpu/o3/inst_queue_impl.hh:
Move comment to better place.
src/cpu/o3/lsq_unit.hh:
Remove old commented code, add in new comments.
src/cpu/o3/lsq_unit_impl.hh:
Remove old commented code, rename variable.

Update copyright.

Merge ktlim@zamp:/z/ktlim2/clean/m5-o3
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

src/cpu/checker/o3_cpu_builder.cc:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/bpred_unit.cc:
src/cpu/o3/commit.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/thread_state.hh:
Hand merge.

Fixes to get compiling to work. This is mainly fixing up some includes; changing functions within the XCs; changing MemReqPtrs to Requests or Packets where appropriate.

Currently the O3 and Ozone CPUs do not work in the new memory system; I still need to fix up the ports to work and handle responses properly. This check-in is so that the merge between m5 and newmem is no longer outstanding.

src/SConscript:
Need to include FU Pool for new CPU model. I'll try to figure out a cleaner way to handle this in the future.
src/base/traceflags.py:
Include new traces flags, fix up merge mess up.
src/cpu/SConscript:
Include the base_dyn_inst.cc as one of othe sources.
Don't compile the Ozone CPU for now.
src/cpu/base.cc:
Remove an extra } from the merge.
src/cpu/base_dyn_inst.cc:
Fixes to make compiling work. Don't instantiate the OzoneCPU for now.
src/cpu/base_dyn_inst.hh:
src/cpu/o3/2bit_local_pred.cc:
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst.hh:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/bpred_unit.cc:
src/cpu/o3/btb.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/free_list.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/sat_counter.hh:
src/cpu/op_class.hh:
src/cpu/ozone/cpu.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/checker/o3_cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/mem/request.hh:
src/cpu/o3/fu_pool.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/dyn_inst.cc:
src/cpu/ozone/dyn_inst.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/ozone_impl.hh:
src/cpu/ozone/thread_state.hh:
Fixes to get compiling to work.
src/cpu/o3/alpha_cpu.hh:
Fixes to get compiling to work.
Float reg accessors have changed, as well as MemReqPtrs to RequestPtrs.
src/cpu/o3/alpha_dyn_inst_impl.hh:
Fixes to get compiling to work.
Pass in the packet to the completeAcc function.
Fix up syscall function.