History log of /gem5/src/arch/mips/remote_gdb.hh
Revision Date Author Comments
# 12449:2260f4a68210 16-Jan-2018 Gabe Black <gabeblack@google.com>

sim, arch, base: Refactor the base remote GDB class.

Fold the GDBListener class into the main BaseRemoteGDB class, move
around a bunch of functions, convert a lot of internal functions to
be private, move some functions into the .cc, make some functions
non-virtual which didn't really need to be overridden.

Change-Id: Id0832b730b0fdfb2eababa5067e72c66de1c147d
Reviewed-on: https://gem5-review.googlesource.com/7422
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>


# 12031:46116545e745 11-May-2017 Gabe Black <gabeblack@google.com>

base: Refactor the GDB code.

The new version modularizes the implementation of the various commands,
gets rid of dynamic allocation of the register cache, fixes some small
style problems, and uses exceptions to simplify error handling internal to
the GDB stub.

Change-Id: Iff3548373ce4adfb99106a810f5713b769df89b2
Reviewed-on: https://gem5-review.googlesource.com/3280
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>


# 11274:d9a0136ab8cc 18-Dec-2015 Boris Shingarov <shingarov@labware.com>

arm: remote GDB: rationalize structure of register offsets

Currently, the wire format of register values in g- and G-packets is
modelled using a union of uint8/16/32/64 arrays. The offset positions
of each register are expressed as a "register count" scaled according
to the width of the register in question. This results in counter-
intuitive and error-prone "register count arithmetic", and some
formats would even be altogether unrepresentable in such model, e.g.
a 64-bit register following a 32-bit one would have a fractional index
in the regs64 array.
Another difficulty is that the array is allocated before the actual
architecture of the workload is known (and therefore before the correct
size for the array can be calculated).

With this patch I propose a simpler mechanism for expressing the
register set structure. In the new code, GdbRegCache is an abstract
class; its subclasses contain straightforward structs reflecting the
register representation. The determination whether to use e.g. the
AArch32 vs. AArch64 register set (or SPARCv8 vs SPARCv9, etc.) is made
by polymorphically dispatching getregs() to the concrete subclass.
The subclass is not instantiated until it is needed for actual
g-/G-packet processing, when the mode is already known.

This patch is not meant to be merged in on its own, because it changes
the contract between src/base/remote_gdb.* and src/arch/*/remote_gdb.*,
so as it stands right now, it would break the other architectures.
In this patch only the base and the ARM code are provided for review;
once we agree on the structure, I will provide src/arch/*/remote_gdb.*
for the other architectures; those patches could then be merged in
together.

Review Request: http://reviews.gem5.org/r/3207/
Pushed by Joel Hestness <jthestness@gmail.com>


# 10601:6efb37480d87 06-Dec-2014 Gabe Black <gabeblack@google.com>

misc: Generalize GDB single stepping.

The new single stepping implementation for x86 doesn't rely on any ISA
specific properties or functionality. This change pulls out the per ISA
implementation of those functions and promotes the X86 implementation to the
base class.

One drawback of that implementation is that the CPU might stop on an
instruction twice if it's affected by both breakpoints and single stepping.
While that might be a little surprising, it's harmless and would only happen
under somewhat unlikely circumstances.


# 10595:25ecfc14f73f 05-Dec-2014 Gabe Black <gabeblack@google.com>

misc: Make the GDB register cache accessible in various sized chunks.

Not all ISAs have 64 bit sized registers, so it's not always very convenient
to access the GDB register cache in 64 bit sized chunks. This change makes it
accessible in 8, 16, 32, or 64 bit chunks. The MIPS and ARM implementations
were working around that limitation by bundling and unbundling 32 bit values
into 64 bit values. That code has been removed.


# 8931:7a1dfb191e3f 06-Apr-2012 Andreas Hansson <andreas.hansson@arm.com>

MEM: Enable multiple distributed generalized memories

This patch removes the assumption on having on single instance of
PhysicalMemory, and enables a distributed memory where the individual
memories in the system are each responsible for a single contiguous
address range.

All memories inherit from an AbstractMemory that encompasses the basic
behaviuor of a random access memory, and provides untimed access
methods. What was previously called PhysicalMemory is now
SimpleMemory, and a subclass of AbstractMemory. All future types of
memory controllers should inherit from AbstractMemory.

To enable e.g. the atomic CPU and RubyPort to access the now
distributed memory, the system has a wrapper class, called
PhysicalMemory that is aware of all the memories in the system and
their associated address ranges. This class thus acts as an
infinitely-fast bus and performs address decoding for these "shortcut"
accesses. Each memory can specify that it should not be part of the
global address map (used e.g. by the functional memories by some
testers). Moreover, each memory can be configured to be reported to
the OS configuration table, useful for populating ATAG structures, and
any potential ACPI tables.

Checkpointing support currently assumes that all memories have the
same size and organisation when creating and resuming from the
checkpoint. A future patch will enable a more flexible
re-organisation.


# 8544:2862c39f66f8 10-Sep-2011 Deyuan Guo <guodeyuan@tsinghua.org.cn>

MIPS: Implement gem5/src/arch/mips/remote_gdb.cc.
So a mips-cross-gdb can connect with gem5(MIPS_SE), and do some remote
debugging.

Testing:

Build gem5 for MIPS_SE and make gem5 wait at beginning:
modify "rgdb_wait = -1" to "rgdb_wait = 0" in src/sim/system.cc;
scons build/MIPS_SE/gem5.opt CPU_MODELS=O3CPU
----
Build GDB-7.3 mips-cross:
./configure --target=mips-linux-gnu --prefix=xxx/gdb-7.3-install/
make
make install
----
Run:
./build/MIPS_SE/gem5.opt configs/example/se.py --detailed --caches
./mips-linux-gnu-gdb xxx/gem5/tests/test-progs/hello/bin/mips/linux/hello
(gdb) target remote :7000
(gdb) info registers
(gdb) disassemble
(gdb) si
(gdb) break main
(gdb) c
(gdb) quit
Testing done.


# 5254:c555f8b07345 15-Nov-2007 Korey Sewell <ksewell@umich.edu>

fix MIPS headers


# 5222:bb733a878f85 13-Nov-2007 Korey Sewell <ksewell@umich.edu>

Add in files from merge-bare-iron, get them compiling in FS and SE mode


# 3963:5be059a4fb1a 21-Dec-2006 Gabe Black <gblack@eecs.umich.edu>

Stub for SE mode gdb support for MIPS.