rundiff revision 2783:381a5413b55a
1#! /usr/bin/env perl
2
3# Copyright (c) 2003 The Regents of The University of Michigan
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions are
8# met: redistributions of source code must retain the above copyright
9# notice, this list of conditions and the following disclaimer;
10# redistributions in binary form must reproduce the above copyright
11# notice, this list of conditions and the following disclaimer in the
12# documentation and/or other materials provided with the distribution;
13# neither the name of the copyright holders nor the names of its
14# contributors may be used to endorse or promote products derived from
15# this software without specific prior written permission.
16#
17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28#
29# Authors: Nathan Binkert
30#          Steve Reinhardt
31
32# Diff two streams.
33#
34# Unlike regular diff, this script does not read in the entire input
35# before doing a diff, so it can be used on lengthy outputs piped from
36# other programs (e.g., M5 traces).  The best way to do this is to
37# take advantage of the power of Perl's open function, which will
38# automatically fork a subprocess if the last character in the
39# "filename" is a pipe (|).  Thus to compare the instruction traces
40# from two versions of m5 (m5a and m5b), you can do this:
41#
42# rundiff 'm5a --traceflags=InstExec |' 'm5b --traceflags=InstExec |'
43#
44
45use strict;
46
47use Getopt::Std;
48
49#
50# Options:
51#  -c <n> : print n lines of context before & after changes
52#  -l <n> : use n lines of lookahead
53#  -x     : use "complex" diff from Algorithm::Diff (see below)
54#
55our ($opt_c, $opt_l, $opt_x);
56getopts('c:l:x');
57
58#
59# For the highest-quality (minimal) diffs, we can use the
60# Algorithm::Diff package.  By default, a built-in, simple, and
61# generally quite adequate algorithm will be used.  If you have
62# Algorithm::Diff installed on your system, and don't mind having the
63# script go slower (like 3-4x slower, based on informal observation),
64# then specify '-x' on the command line to use it.
65my $use_complexdiff = defined($opt_x);
66
67if ($use_complexdiff) {
68    # Don't use 'use', as that's a compile-time option and will fail
69    # on systems that don't have Algorithm::Diff installed even if
70    # $use_complexdiff is false.  'require' is evaluated at runtime,
71    # so it's OK.
72    require Algorithm::Diff;
73    import Algorithm::Diff qw(traverse_sequences);
74};
75
76my $lookahead_lines = $opt_l || 200;
77
78# in theory you could have different amounts of context before and
79# after a diff, but until someone needs that there's only one arg to
80# set both.
81my $precontext_lines = $opt_c || 3;
82my $postcontext_lines = $precontext_lines;
83
84my $file1 = $ARGV[0];
85my $file2 = $ARGV[1];
86
87die "Need two args." if (!(defined($file1) && defined($file2)));
88
89my ($fh1, $fh2);
90open($fh1, $file1) or die "Can't open $file1";
91open($fh2, $file2) or die "Can't open $file2";
92
93# print files to output so we know which is which
94print "-$file1\n";
95print "+$file2\n";
96
97# buffer of matching lines for pre-diff context
98my @precontext = ();
99# number of post-diff matching lines remaining to print
100my $postcontext = 0;
101
102# lookahead buffers for $file1 and $file2 respectively
103my @lines1 = ();
104my @lines2 = ();
105
106# Next line number available to print from each file.  Generally this
107# corresponds to the oldest line in @precontext, or the oldest line in
108# @lines1 and @lines2 if @precontext is empty.
109my $lineno1 = 1;
110my $lineno2 = 1;
111
112# Fill a lookahead buffer to $lookahead_lines lines (or until EOF).
113sub fill
114{
115    my ($fh, $array) = @_;
116
117    while (@$array < $lookahead_lines) {
118	my $line = <$fh>;
119	last if (!defined($line));
120	push @$array, $line;
121    }
122}
123
124# Print and delete n lines from front of given array with given prefix.
125sub printlines
126{
127    my ($array, $n, $prefix) = @_;
128
129    while ($n--) {
130	my $line = shift @$array;
131	last if (!defined($line));
132	print $prefix, $line;
133    }
134}
135
136# Print a difference region where n1 lines of file1 were replaced by
137# n2 lines of file2 (where either n1 or n2 could be zero).
138sub printdiff
139{
140    my ($n1, $n2)= @_;
141
142    # If the precontext buffer is full or we're at the beginning of a
143    # file, then this is a new diff region, so we should print a
144    # header indicating the current line numbers.  If we're past the
145    # beginning and the precontext buffer isn't full, then whatever
146    # we're about to print is contiguous with the end of the last
147    # region we printed, so we just concatenate them on the output.
148    if (@precontext == $precontext_lines || ($lineno1 == 0 && $lineno2 == 0)) {
149	print "@@ -$lineno1 +$lineno2 @@\n";
150    }
151
152    # Print and clear the precontext buffer.
153    if (@precontext) {
154	print ' ', join(' ', @precontext);
155	$lineno1 += scalar(@precontext);
156	$lineno2 += scalar(@precontext);
157	@precontext = ();
158    }
159
160    # Print the differing lines.
161    printlines(\@lines1, $n1, '-');
162    printlines(\@lines2, $n2, '+');
163    $lineno1 += $n1;
164    $lineno2 += $n2;
165
166    # Set $postcontext to print the next $postcontext_lines matching lines.
167    $postcontext = $postcontext_lines;
168}
169
170
171########################
172#
173# Complex diff algorithm
174#
175########################
176
177{
178    my $match_found;
179    my $discard_lines1;
180    my $discard_lines2;
181
182    sub match { $match_found = 1; }
183    sub discard1 { $discard_lines1++ unless $match_found; }
184    sub discard2 { $discard_lines2++ unless $match_found; }
185
186    sub complex_diff
187    {
188	$match_found = 0;
189	$discard_lines1 = 0;
190	$discard_lines2 = 0;
191
192	# See Diff.pm.  Note that even though this call generates a
193	# complete diff of both lookahead buffers, all we use it for
194	# is to figure out how many lines to discard off the front of
195	# each buffer to resync the streams.
196	traverse_sequences( \@lines1, \@lines2,
197			    { MATCH => \&match,
198			      DISCARD_A => \&discard1,
199			      DISCARD_B => \&discard2 });
200
201	if (!$match_found) {
202	    printdiff(scalar(@lines1), scalar(@lines2));
203	    die "Lost sync!";
204	}
205
206	# Since we shouldn't get here unless the first lines of the
207	# buffers are different, then we must discard some lines off
208	# at least one of the buffers.
209	die if ($discard_lines1 == 0 && $discard_lines2 == 0);
210
211	printdiff($discard_lines1, $discard_lines2);
212    }
213}
214
215#######################
216#
217# Simple diff algorithm
218#
219#######################
220
221# Check for a pair of matching lines; if found, generate appropriate
222# diff output.
223sub checkmatch
224{
225    my ($n1, $n2) = @_;
226
227    # Check if two adjacent lines match, to reduce false resyncs
228    # (particularly on unrelated blank lines).  This generates
229    # larger-than-necessary diffs when a single line really should be
230    # treated as common; if that bugs you, use Algorithm::Diff.
231    if ($lines1[$n1] eq $lines2[$n2] && $lines1[$n1+1] eq $lines2[$n2+1]) {
232	printdiff($n1, $n2);
233	return 1;
234    }
235
236    return 0;
237}
238
239sub simple_diff
240{
241    # Look for differences of $cnt lines to resync,
242    # increasing $cnt from 1 to $lookahead_lines until we find
243    # something.
244    for (my $cnt = 1; $cnt < $lookahead_lines-1; ++$cnt) {
245	# Check for n lines in one file being replaced by
246	# n lines in the other.
247	return if checkmatch($cnt, $cnt);
248	# Find differences where n lines in one file were
249	# replaced by m lines in the other.  We let m = $cnt
250	# and iterate for n = 0 to $cnt-1.
251	for (my $n = 0; $n < $cnt; ++$n) {
252	    return if checkmatch($n, $cnt);
253	    return if checkmatch($cnt, $n);
254	}
255    }
256
257    printdiff(scalar(@lines1), scalar(@lines2));
258    die "Lost sync!";
259}
260
261# Set the pointer to the appropriate diff function.
262#
263# Note that in either case the function determines how many lines to
264# discard from the front of each lookahead buffer to resync the
265# streams, then prints the appropriate diff output and discards them.
266# After the function returns, it should always be the case that
267# $lines1[0] eq $lines2[0].
268my $find_diff = $use_complexdiff ? \&complex_diff : \&simple_diff;
269
270# The main loop.
271while (1) {
272    # keep lookahead buffers topped up
273    fill($fh1, \@lines1);
274    fill($fh2, \@lines2);
275
276    # peek at first line in each buffer
277    my $l1 = $lines1[0];
278    my $l2 = $lines2[0];
279
280    if (!defined($l1) && !defined($l2)) {
281	# reached EOF on both streams: exit
282	exit(1);
283    }
284
285    if ($l1 eq $l2) {
286	# matching lines: delete from lookahead buffer
287	shift @lines1;
288	shift @lines2;
289	# figure out what to do with this line
290	if ($postcontext > 0) {
291	    # we're in the post-context of a diff: print it
292	    $postcontext--;
293	    print ' ', $l1;
294	    $lineno1++;
295	    $lineno2++;
296	}
297	else {
298	    # we're in the middle of a matching region... save this
299	    # line for precontext in case we run into a difference.
300	    push @precontext, $l1;
301	    # don't let precontext buffer get bigger than needed
302	    while (@precontext > $precontext_lines) {
303		shift @precontext;
304		$lineno1++;
305		$lineno2++;
306	    }
307	}
308    }
309    else {
310	# Mismatch.  Deal with it.
311	&$find_diff();
312    }
313}
314