xref: /gem5/tests/quick/fs/10.linux-boot/ref/arm/linux/realview-simple-atomic-dual/system.terminal

[    0.000000] Linux version 2.6.38.8-gem5 (saidi@zeep) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 SMP Mon Aug 15 21:18:38 EDT 2011

[    0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f

[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

[    0.000000] Machine: ARM-RealView PBX

[    0.000000] Ignoring unrecognised tag 0x00000000

[    0.000000] bootconsole [earlycon0] enabled

[    0.000000] Memory policy: ECC disabled, Data cache writealloc

[    0.000000] On node 0 totalpages: 32768

[    0.000000]   DMA zone: 256 pages used for memmap

[    0.000000]   DMA zone: 0 pages reserved

[    0.000000]   DMA zone: 32512 pages, LIFO batch:7

[    0.000000] PERCPU: Embedded 7 pages/cpu @c0556000 s6272 r8192 d14208 u32768

[    0.000000] pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512

[    0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1

[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)

[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

[    0.000000] Memory: 128MB = 128MB total

[    0.000000] Memory: 125376k/125376k available, 5696k reserved, 0K highmem

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)

[    0.000000]     vmalloc : 0xc8800000 - 0xf8000000   ( 760 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)

[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)

[    0.000000]       .init : 0xc0008000 - 0xc0029000   ( 132 kB)

[    0.000000]       .text : 0xc0029000 - 0xc031c044   (3021 kB)

[    0.000000]       .data : 0xc031e000 - 0xc0336b40   (  99 kB)

[    0.000000] Hierarchical RCU implementation.

[    0.000000] 	RCU-based detection of stalled CPUs is disabled.

[    0.000000] NR_IRQS:128

[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms

[    0.000000] Console: colour dummy device 80x30

[    0.000000] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)

[    0.000000] pid_max: default: 32768 minimum: 301

[    0.000000] Mount-cache hash table entries: 512

[    0.000000] CPU: Testing write buffer coherency: ok

[    0.000000] Calibrating local timer... 1000.00MHz.

[    0.000104] CPU1: Booted secondary processor

[    0.000104] CPU1: Unknown IPI message 0x1

[    0.000104] Brought up 2 CPUs

[    0.000104] SMP: Total of 2 processors activated (7995.39 BogoMIPS).

[    0.000104] devtmpfs: initialized

[    0.000105] NET: Registered protocol family 16

[    0.000105] Serial: AMBA PL011 UART driver

[    0.000106] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3

[    0.000106] console [ttyAMA0] enabled, bootconsole disabled
[    0.000106] console [ttyAMA0] enabled, bootconsole disabled

[    0.000108] bio: create slab <bio-0> at 0
[    0.000108] SCSI subsystem initialized
[    0.000108] libata version 3.00 loaded.
[    0.000108] Switching to clocksource timer3
[    0.000112] NET: Registered protocol family 2
[    0.000113] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000113] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000113] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000113] TCP: Hash tables configured (established 4096 bind 4096)
[    0.000113] TCP reno registered
[    0.000113] UDP hash table entries: 128 (order: 0, 4096 bytes)
[    0.000113] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[    0.000113] NET: Registered protocol family 1
[    0.000113] msgmni has been set to 244
[    0.000113] io scheduler noop registered (default)
[    0.000114] CLCD: RealView hardware, XVGA display
[    0.000161] Console: switching to colour frame buffer device 128x48
[    0.000171] brd: module loaded
[    0.000172] loop: module loaded
[    0.000173] scsi0 : pata_platform
[    0.000173] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
[    0.000173] slram: not enough parameters.
[    0.000174] mousedev: PS/2 mouse device common for all mice
[    0.000174] TCP cubic registered
[    0.000174] NET: Registered protocol family 17
[    0.000174] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
[    0.000434] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
[    0.000434] ata1.00: 1048320 sectors, multi 0: LBA 
[    0.000434] ata1.00: configured for PIO
[    0.000434] scsi 0:0:0:0: Direct-Access     ATA      M5 IDE Disk      n/a  PQ: 0 ANSI: 5
[    0.000434] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
[    0.000434] sd 0:0:0:0: [sda] Write Protect is off
[    0.000434] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.000434] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.000434] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    0.000435]  sda: sda1
[    0.000435] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.001215] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
[    0.003993] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
[    0.004063] VFS: Mounted root (ext2 filesystem) on device 8:1.
[    0.004063] devtmpfs: mounted
[    0.004063] Freeing init memory: 132K

init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST)

starting pid 336, tty '': '/etc/rc.d/rc.local'
warning: can't open /etc/mtab: No such file or directory
Thu Jan  1 00:00:02 UTC 1970
S: devpts
Thu Jan  1 00:00:02 UTC 1970