system.terminal revision 8802:ef66a9083bc4
1[ 0.000000] Linux version 2.6.38.8-gem5 (saidi@zeep) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 SMP Mon Aug 15 21:18:38 EDT 2011 2 3[ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f 4 5[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache 6 7[ 0.000000] Machine: ARM-RealView PBX 8 9[ 0.000000] Ignoring unrecognised tag 0x00000000 10 11[ 0.000000] bootconsole [earlycon0] enabled 12 13[ 0.000000] Memory policy: ECC disabled, Data cache writealloc 14 15[ 0.000000] On node 0 totalpages: 32768 16 17[ 0.000000] DMA zone: 256 pages used for memmap 18 19[ 0.000000] DMA zone: 0 pages reserved 20 21[ 0.000000] DMA zone: 32512 pages, LIFO batch:7 22 23[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0556000 s6272 r8192 d14208 u32768 24 25[ 0.000000] pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096 26 27[ 0.000000] pcpu-alloc: [0] 0 28 29[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 30 31[ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1 32 33[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) 34 35[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) 36 37[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) 38 39[ 0.000000] Memory: 128MB = 128MB total 40 41[ 0.000000] Memory: 125408k/125408k available, 5664k reserved, 0K highmem 42 43[ 0.000000] Virtual kernel memory layout: 44 45[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) 46 47[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) 48 49[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) 50 51[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB) 52 53[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) 54 55[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) 56 57[ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB) 58 59[ 0.000000] .text : 0xc0029000 - 0xc031c044 (3021 kB) 60 61[ 0.000000] .data : 0xc031e000 - 0xc0336b40 ( 99 kB) 62 63[ 0.000000] Hierarchical RCU implementation. 64 65[ 0.000000] RCU-based detection of stalled CPUs is disabled. 66 67[ 0.000000] NR_IRQS:128 68 69[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms 70 71[ 0.000000] Console: colour dummy device 80x30 72 73[ 0.000000] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480) 74 75[ 0.000000] pid_max: default: 32768 minimum: 301 76 77[ 0.000000] Mount-cache hash table entries: 512 78 79[ 0.000000] CPU: Testing write buffer coherency: ok 80 81[ 0.000000] Brought up 1 CPUs 82 83[ 0.000000] SMP: Total of 1 processors activated (3997.69 BogoMIPS). 84 85[ 0.000001] devtmpfs: initialized 86 87[ 0.000002] NET: Registered protocol family 16 88 89[ 0.000003] Serial: AMBA PL011 UART driver 90 91[ 0.000003] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3 92 93[ 0.000003] console [ttyAMA0] enabled, bootconsole disabled 94[ 0.000003] console [ttyAMA0] enabled, bootconsole disabled 95 96[ 0.000007] bio: create slab <bio-0> at 0 97[ 0.000007] SCSI subsystem initialized 98[ 0.000008] libata version 3.00 loaded. 99[ 0.000008] Switching to clocksource timer3 100[ 0.000014] NET: Registered protocol family 2 101[ 0.000015] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) 102[ 0.000015] TCP established hash table entries: 4096 (order: 3, 32768 bytes) 103[ 0.000015] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) 104[ 0.000015] TCP: Hash tables configured (established 4096 bind 4096) 105[ 0.000015] TCP reno registered 106[ 0.000015] UDP hash table entries: 128 (order: 0, 4096 bytes) 107[ 0.000015] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) 108[ 0.000015] NET: Registered protocol family 1 109[ 0.000016] msgmni has been set to 244 110[ 0.000016] io scheduler noop registered (default) 111[ 0.000018] CLCD: RealView hardware, XVGA display 112[ 0.000074] Console: switching to colour frame buffer device 128x48 113[ 0.000085] brd: module loaded 114[ 0.000087] loop: module loaded 115[ 0.000088] scsi0 : pata_platform 116[ 0.000088] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100 117[ 0.000089] slram: not enough parameters. 118[ 0.000089] mousedev: PS/2 mouse device common for all mice 119[ 0.000090] TCP cubic registered 120[ 0.000090] NET: Registered protocol family 17 121[ 0.000090] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0 122[ 0.000364] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66 123[ 0.000364] ata1.00: 1048320 sectors, multi 0: LBA 124[ 0.000364] ata1.00: configured for PIO 125[ 0.000365] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5 126[ 0.000365] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB) 127[ 0.000365] sd 0:0:0:0: [sda] Write Protect is off 128[ 0.000365] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 129[ 0.000365] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA 130[ 0.000367] sda: sda1 131[ 0.000367] sd 0:0:0:0: Attached scsi generic sg0 type 0 132[ 0.000367] sd 0:0:0:0: [sda] Attached SCSI disk 133[ 0.001128] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0 134[ 0.003906] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1 135[ 0.003942] VFS: Mounted root (ext2 filesystem) on device 8:1. 136[ 0.003943] devtmpfs: mounted 137[ 0.003943] Freeing init memory: 132K 138 139init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST) 140 141starting pid 331, tty '': '/etc/rc.d/rc.local' 142warning: can't open /etc/mtab: No such file or directory 143Thu Jan 1 00:00:02 UTC 1970 144S: devpts 145Thu Jan 1 00:00:02 UTC 1970 146