SConscript revision 9244:4672c12307a7
1# -*- mode:python -*-
2
3# Copyright (c) 2004-2006 The Regents of The University of Michigan
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions are
8# met: redistributions of source code must retain the above copyright
9# notice, this list of conditions and the following disclaimer;
10# redistributions in binary form must reproduce the above copyright
11# notice, this list of conditions and the following disclaimer in the
12# documentation and/or other materials provided with the distribution;
13# neither the name of the copyright holders nor the names of its
14# contributors may be used to endorse or promote products derived from
15# this software without specific prior written permission.
16#
17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28#
29# Authors: Steve Reinhardt
30#          Kevin Lim
31
32import os, signal
33import sys, time
34import glob
35from SCons.Script.SConscript import SConsEnvironment
36
37Import('env')
38
39env['DIFFOUT'] = File('diff-out')
40
41# get the termcap from the environment
42termcap = env['TERMCAP']
43
44# Dict that accumulates lists of tests by category (quick, medium, long)
45env.Tests = {}
46
47def contents(node):
48    return file(str(node)).read()
49
50# functions to parse return value from scons Execute()... not the same
51# as wait() etc., so python built-in os funcs don't work.
52def signaled(status):
53    return (status & 0x80) != 0;
54
55def signum(status):
56    return (status & 0x7f);
57
58# List of signals that indicate that we should retry the test rather
59# than consider it failed.
60retry_signals = (signal.SIGTERM, signal.SIGKILL, signal.SIGINT,
61                 signal.SIGQUIT, signal.SIGHUP)
62
63# regular expressions of lines to ignore when diffing outputs
64output_ignore_regexes = (
65    '^command line:',		# for stdout file
66    '^M5 compiled ',		# for stderr file
67    '^M5 started ',		# for stderr file
68    '^M5 executing on ',	# for stderr file
69    '^Simulation complete at',	# for stderr file
70    '^Listening for',		# for stderr file
71    'listening for remote gdb',	# for stderr file
72    )
73
74output_ignore_args = ' '.join(["-I '"+s+"'" for s in output_ignore_regexes])
75
76output_ignore_args += ' --exclude=stats.txt --exclude=outdiff'
77
78def run_test(target, source, env):
79    """Check output from running test.
80
81    Targets are as follows:
82    target[0] : status
83
84    Sources are:
85    source[0] : M5 binary
86    source[1] : tests/run.py script
87    source[2] : reference stats file
88
89    """
90    # make sure target files are all gone
91    for t in target:
92        if os.path.exists(t.abspath):
93            env.Execute(Delete(t.abspath))
94
95    tgt_dir = os.path.dirname(str(target[0]))
96
97    # Base command for running test.  We mess around with indirectly
98    # referring to files via SOURCES and TARGETS so that scons can mess
99    # with paths all it wants to and we still get the right files.
100    cmd = '${SOURCES[0]} -d %s -re ${SOURCES[1]} %s' % (tgt_dir, tgt_dir)
101
102    # Prefix test run with batch job submission command if appropriate.
103    # Batch command also supports timeout arg (in seconds, not minutes).
104    timeout = 15 * 60 # used to be a param, probably should be again
105    if env['BATCH']:
106        cmd = '%s -t %d %s' % (env['BATCH_CMD'], timeout, cmd)
107
108    pre_exec_time = time.time()
109    status = env.Execute(env.subst(cmd, target=target, source=source))
110    if status == 0:
111        # M5 terminated normally.
112        # Run diff on output & ref directories to find differences.
113        # Exclude the stats file since we will use diff-out on that.
114
115        # NFS file systems can be annoying and not have updated yet
116        # wait until we see the file modified
117        statsdiff = os.path.join(tgt_dir, 'statsdiff')
118        m_time = 0
119        nap = 0
120        while m_time < pre_exec_time and nap < 10:
121            try:
122                m_time = os.stat(statsdiff).st_mtime
123            except OSError:
124                pass
125            time.sleep(1)
126            nap += 1
127
128        outdiff = os.path.join(tgt_dir, 'outdiff')
129        # tack 'true' on the end so scons doesn't report diff's
130        # non-zero exit code as a build error
131        diffcmd = 'diff -ubrs %s ${SOURCES[2].dir} %s > %s; true' \
132                  % (output_ignore_args, tgt_dir, outdiff)
133        env.Execute(env.subst(diffcmd, target=target, source=source))
134        print "===== Output differences ====="
135        print contents(outdiff)
136        # Run diff-out on stats.txt file
137        diffcmd = '$DIFFOUT ${SOURCES[2]} %s > %s' \
138                  % (os.path.join(tgt_dir, 'stats.txt'), statsdiff)
139        diffcmd = env.subst(diffcmd, target=target, source=source)
140        status = env.Execute(diffcmd, strfunction=None)
141        print "===== Statistics differences ====="
142        print contents(statsdiff)
143
144    else: # m5 exit status != 0
145        # M5 did not terminate properly, so no need to check the output
146        if signaled(status):
147            print 'M5 terminated with signal', signum(status)
148            if signum(status) in retry_signals:
149                # Consider the test incomplete; don't create a 'status' output.
150                # Hand the return status to scons and let scons decide what
151                # to do about it (typically terminate unless run with -k).
152                return status
153        else:
154            print 'M5 exited with non-zero status', status
155        # complete but failed execution (call to exit() with non-zero
156        # status, SIGABORT due to assertion failure, etc.)... fall through
157        # and generate FAILED status as if output comparison had failed
158
159    # Generate status file contents based on exit status of m5 or diff-out
160    if status == 0:
161        status_str = "passed."
162    else:
163        status_str = "FAILED!"
164    f = file(str(target[0]), 'w')
165    print >>f, tgt_dir, status_str
166    f.close()
167    # done
168    return 0
169
170def run_test_string(target, source, env):
171    return env.subst("Running test in ${TARGETS[0].dir}.",
172                     target=target, source=source)
173
174testAction = env.Action(run_test, run_test_string)
175
176def print_test(target, source, env):
177    # print the status with colours to make it easier to see what
178    # passed and what failed
179    line = contents(source[0])
180
181    # split the line to words and get the last one
182    words = line.split()
183    status = words[-1]
184
185    # if the test failed make it red, if it passed make it green, and
186    # skip the punctuation
187    if status == "FAILED!":
188        status = termcap.Red + status[:-1] + termcap.Normal + status[-1]
189    elif status == "passed.":
190        status = termcap.Green + status[:-1] + termcap.Normal + status[-1]
191
192    # put it back in the list and join with space
193    words[-1] = status
194    line = " ".join(words)
195
196    print '***** ' + line
197    return 0
198
199printAction = env.Action(print_test, strfunction = None)
200
201# Static vars for update_test:
202# - long-winded message about ignored sources
203ignore_msg = '''
204Note: The following file(s) will not be copied.  New non-standard
205      output files must be copied manually once before --update-ref will
206      recognize them as outputs.  Otherwise they are assumed to be
207      inputs and are ignored.
208'''
209# - reference files always needed
210needed_files = set(['simout', 'simerr', 'stats.txt', 'config.ini'])
211# - source files we always want to ignore
212known_ignores = set(['status', 'outdiff', 'statsdiff'])
213
214def update_test(target, source, env):
215    """Update reference test outputs.
216
217    Target is phony.  First two sources are the ref & new stats.txt file
218    files, respectively.  We actually copy everything in the
219    respective directories except the status & diff output files.
220
221    """
222    dest_dir = str(source[0].get_dir())
223    src_dir = str(source[1].get_dir())
224    dest_files = set(os.listdir(dest_dir))
225    src_files = set(os.listdir(src_dir))
226    # Copy all of the required files plus any existing dest files.
227    wanted_files = needed_files | dest_files
228    missing_files = wanted_files - src_files
229    if len(missing_files) > 0:
230        print "  WARNING: the following file(s) are missing " \
231              "and will not be updated:"
232        print "    ", " ,".join(missing_files)
233    copy_files = wanted_files - missing_files
234    warn_ignored_files = (src_files - copy_files) - known_ignores
235    if len(warn_ignored_files) > 0:
236        print ignore_msg,
237        print "       ", ", ".join(warn_ignored_files)
238    for f in copy_files:
239        if f in dest_files:
240            print "  Replacing file", f
241            dest_files.remove(f)
242        else:
243            print "  Creating new file", f
244        copyAction = Copy(os.path.join(dest_dir, f), os.path.join(src_dir, f))
245        copyAction.strfunction = None
246        env.Execute(copyAction)
247    return 0
248
249def update_test_string(target, source, env):
250    return env.subst("Updating ${SOURCES[0].dir} from ${SOURCES[1].dir}",
251                     target=target, source=source)
252
253updateAction = env.Action(update_test, update_test_string)
254
255def test_builder(env, ref_dir):
256    """Define a test."""
257
258    (category, mode, name, _ref, isa, opsys, config) = ref_dir.split('/')
259    assert(_ref == 'ref')
260
261    # target path (where test output goes) is the same except without
262    # the 'ref' component
263    tgt_dir = os.path.join(category, mode, name, isa, opsys, config)
264
265    # prepend file name with tgt_dir
266    def tgt(f):
267        return os.path.join(tgt_dir, f)
268
269    ref_stats = os.path.join(ref_dir, 'stats.txt')
270    new_stats = tgt('stats.txt')
271    status_file = tgt('status')
272
273    env.Command([status_file],
274                [env.M5Binary, 'run.py', ref_stats],
275                testAction)
276
277    # phony target to echo status
278    if GetOption('update_ref'):
279        p = env.Command(tgt('_update'),
280                        [ref_stats, new_stats, status_file],
281                        updateAction)
282    else:
283        p = env.Command(tgt('_print'), [status_file], printAction)
284
285    env.AlwaysBuild(p)
286
287
288# Figure out applicable configs based on build type
289configs = []
290if env['TARGET_ISA'] == 'alpha':
291    configs += ['tsunami-simple-atomic',
292                'tsunami-simple-timing',
293                'tsunami-simple-atomic-dual',
294                'tsunami-simple-timing-dual',
295                'twosys-tsunami-simple-atomic',
296                'tsunami-o3', 'tsunami-o3-dual',
297                'tsunami-inorder']
298if env['TARGET_ISA'] == 'sparc':
299    configs += ['t1000-simple-atomic',
300                't1000-simple-timing']
301if env['TARGET_ISA'] == 'arm':
302    configs += ['simple-atomic-dummychecker',
303                'o3-timing-checker',
304                'realview-simple-atomic',
305                'realview-simple-atomic-dual',
306                'realview-simple-timing',
307                'realview-simple-timing-dual',
308                'realview-o3',
309                'realview-o3-checker',
310                'realview-o3-dual']
311if env['TARGET_ISA'] == 'x86':
312    configs += ['pc-simple-atomic',
313                'pc-simple-timing',
314                'pc-o3-timing']
315
316configs += ['simple-atomic', 'simple-timing', 'o3-timing', 'memtest',
317            'simple-atomic-mp', 'simple-timing-mp', 'o3-timing-mp',
318            'inorder-timing', 'rubytest', 'tgen-simple-mem',
319            'tgen-simple-dram']
320
321if env['PROTOCOL'] != 'None':
322    if env['PROTOCOL'] == 'MI_example':
323        configs += [c + "-ruby" for c in configs]
324    else:
325        configs = [c + "-ruby-" + env['PROTOCOL'] for c in configs]
326
327cwd = os.getcwd()
328os.chdir(str(Dir('.').srcdir))
329for config in configs:
330    dirs = glob.glob('*/*/*/ref/%s/*/%s' % (env['TARGET_ISA'], config))
331    for d in dirs:
332        if not os.path.exists(os.path.join(d, 'skip')):
333            test_builder(env, d)
334os.chdir(cwd)
335