process.cc revision 5335
1/* 2 * Copyright (c) 2001-2005 The Regents of The University of Michigan 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are 7 * met: redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer; 9 * redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution; 12 * neither the name of the copyright holders nor the names of its 13 * contributors may be used to endorse or promote products derived from 14 * this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 * 28 * Authors: Nathan Binkert 29 * Steve Reinhardt 30 * Ali Saidi 31 */ 32 33#include <unistd.h> 34#include <fcntl.h> 35#include <string> 36 37#include "arch/remote_gdb.hh" 38#include "base/intmath.hh" 39#include "base/loader/object_file.hh" 40#include "base/loader/symtab.hh" 41#include "base/statistics.hh" 42#include "config/full_system.hh" 43#include "cpu/thread_context.hh" 44#include "mem/page_table.hh" 45#include "mem/physical.hh" 46#include "mem/translating_port.hh" 47#include "params/Process.hh" 48#include "params/LiveProcess.hh" 49#include "sim/process.hh" 50#include "sim/process_impl.hh" 51#include "sim/stats.hh" 52#include "sim/syscall_emul.hh" 53#include "sim/system.hh" 54 55#include "arch/isa_specific.hh" 56#if THE_ISA == ALPHA_ISA 57#include "arch/alpha/linux/process.hh" 58#include "arch/alpha/tru64/process.hh" 59#elif THE_ISA == SPARC_ISA 60#include "arch/sparc/linux/process.hh" 61#include "arch/sparc/solaris/process.hh" 62#elif THE_ISA == MIPS_ISA 63#include "arch/mips/linux/process.hh" 64#elif THE_ISA == ARM_ISA 65#include "arch/arm/linux/process.hh" 66#elif THE_ISA == X86_ISA 67#include "arch/x86/linux/process.hh" 68#else 69#error "THE_ISA not set" 70#endif 71 72 73using namespace std; 74using namespace TheISA; 75 76// 77// The purpose of this code is to fake the loader & syscall mechanism 78// when there's no OS: thus there's no resone to use it in FULL_SYSTEM 79// mode when we do have an OS 80// 81#if FULL_SYSTEM 82#error "process.cc not compatible with FULL_SYSTEM" 83#endif 84 85// current number of allocated processes 86int num_processes = 0; 87 88Process::Process(ProcessParams * params) 89 : SimObject(params), system(params->system), checkpointRestored(false), 90 max_stack_size(params->max_stack_size) 91{ 92 string in = params->input; 93 string out = params->output; 94 95 // initialize file descriptors to default: same as simulator 96 int stdin_fd, stdout_fd, stderr_fd; 97 98 if (in == "stdin" || in == "cin") 99 stdin_fd = STDIN_FILENO; 100 else if (in == "None") 101 stdin_fd = -1; 102 else 103 stdin_fd = Process::openInputFile(in); 104 105 if (out == "stdout" || out == "cout") 106 stdout_fd = STDOUT_FILENO; 107 else if (out == "stderr" || out == "cerr") 108 stdout_fd = STDERR_FILENO; 109 else if (out == "None") 110 stdout_fd = -1; 111 else 112 stdout_fd = Process::openOutputFile(out); 113 114 stderr_fd = (stdout_fd != STDOUT_FILENO) ? stdout_fd : STDERR_FILENO; 115 116 M5_pid = system->allocatePID(); 117 // initialize first 3 fds (stdin, stdout, stderr) 118 Process::FdMap *fdo = &fd_map[STDIN_FILENO]; 119 fdo->fd = stdin_fd; 120 fdo->filename = in; 121 fdo->flags = O_RDONLY; 122 fdo->mode = -1; 123 fdo->fileOffset = 0; 124 125 fdo = &fd_map[STDOUT_FILENO]; 126 fdo->fd = stdout_fd; 127 fdo->filename = out; 128 fdo->flags = O_WRONLY | O_CREAT | O_TRUNC; 129 fdo->mode = 0774; 130 fdo->fileOffset = 0; 131 132 fdo = &fd_map[STDERR_FILENO]; 133 fdo->fd = stderr_fd; 134 fdo->filename = "STDERR"; 135 fdo->flags = O_WRONLY; 136 fdo->mode = -1; 137 fdo->fileOffset = 0; 138 139 140 // mark remaining fds as free 141 for (int i = 3; i <= MAX_FD; ++i) { 142 Process::FdMap *fdo = &fd_map[i]; 143 fdo->fd = -1; 144 } 145 146 mmap_start = mmap_end = 0; 147 nxm_start = nxm_end = 0; 148 pTable = new PageTable(this); 149 // other parameters will be initialized when the program is loaded 150} 151 152 153void 154Process::regStats() 155{ 156 using namespace Stats; 157 158 num_syscalls 159 .name(name() + ".PROG:num_syscalls") 160 .desc("Number of system calls") 161 ; 162} 163 164// 165// static helper functions 166// 167int 168Process::openInputFile(const string &filename) 169{ 170 int fd = open(filename.c_str(), O_RDONLY); 171 172 if (fd == -1) { 173 perror(NULL); 174 cerr << "unable to open \"" << filename << "\" for reading\n"; 175 fatal("can't open input file"); 176 } 177 178 return fd; 179} 180 181 182int 183Process::openOutputFile(const string &filename) 184{ 185 int fd = open(filename.c_str(), O_WRONLY | O_CREAT | O_TRUNC, 0774); 186 187 if (fd == -1) { 188 perror(NULL); 189 cerr << "unable to open \"" << filename << "\" for writing\n"; 190 fatal("can't open output file"); 191 } 192 193 return fd; 194} 195 196 197int 198Process::registerThreadContext(ThreadContext *tc) 199{ 200 // add to list 201 int myIndex = threadContexts.size(); 202 threadContexts.push_back(tc); 203 204 RemoteGDB *rgdb = new RemoteGDB(system, tc); 205 GDBListener *gdbl = new GDBListener(rgdb, 7000 + myIndex); 206 gdbl->listen(); 207 //gdbl->accept(); 208 209 remoteGDB.push_back(rgdb); 210 211 // return CPU number to caller 212 return myIndex; 213} 214 215void 216Process::startup() 217{ 218 if (threadContexts.empty()) 219 fatal("Process %s is not associated with any CPUs!\n", name()); 220 221 // first thread context for this process... initialize & enable 222 ThreadContext *tc = threadContexts[0]; 223 224 // mark this context as active so it will start ticking. 225 tc->activate(0); 226 227 Port *mem_port; 228 mem_port = system->physmem->getPort("functional"); 229 initVirtMem = new TranslatingPort("process init port", this, 230 TranslatingPort::Always); 231 mem_port->setPeer(initVirtMem); 232 initVirtMem->setPeer(mem_port); 233} 234 235void 236Process::replaceThreadContext(ThreadContext *tc, int tcIndex) 237{ 238 if (tcIndex >= threadContexts.size()) { 239 panic("replaceThreadContext: bad tcIndex, %d >= %d\n", 240 tcIndex, threadContexts.size()); 241 } 242 243 threadContexts[tcIndex] = tc; 244} 245 246// map simulator fd sim_fd to target fd tgt_fd 247void 248Process::dup_fd(int sim_fd, int tgt_fd) 249{ 250 if (tgt_fd < 0 || tgt_fd > MAX_FD) 251 panic("Process::dup_fd tried to dup past MAX_FD (%d)", tgt_fd); 252 253 Process::FdMap *fdo = &fd_map[tgt_fd]; 254 fdo->fd = sim_fd; 255} 256 257 258// generate new target fd for sim_fd 259int 260Process::alloc_fd(int sim_fd, string filename, int flags, int mode, bool pipe) 261{ 262 // in case open() returns an error, don't allocate a new fd 263 if (sim_fd == -1) 264 return -1; 265 266 // find first free target fd 267 for (int free_fd = 0; free_fd <= MAX_FD; ++free_fd) { 268 Process::FdMap *fdo = &fd_map[free_fd]; 269 if (fdo->fd == -1) { 270 fdo->fd = sim_fd; 271 fdo->filename = filename; 272 fdo->mode = mode; 273 fdo->fileOffset = 0; 274 fdo->flags = flags; 275 fdo->isPipe = pipe; 276 fdo->readPipeSource = 0; 277 return free_fd; 278 } 279 } 280 281 panic("Process::alloc_fd: out of file descriptors!"); 282} 283 284 285// free target fd (e.g., after close) 286void 287Process::free_fd(int tgt_fd) 288{ 289 Process::FdMap *fdo = &fd_map[tgt_fd]; 290 if (fdo->fd == -1) 291 warn("Process::free_fd: request to free unused fd %d", tgt_fd); 292 293 fdo->fd = -1; 294 fdo->filename = "NULL"; 295 fdo->mode = 0; 296 fdo->fileOffset = 0; 297 fdo->flags = 0; 298 fdo->isPipe = false; 299 fdo->readPipeSource = 0; 300} 301 302 303// look up simulator fd for given target fd 304int 305Process::sim_fd(int tgt_fd) 306{ 307 if (tgt_fd > MAX_FD) 308 return -1; 309 310 return fd_map[tgt_fd].fd; 311} 312 313Process::FdMap * 314Process::sim_fd_obj(int tgt_fd) 315{ 316 if (tgt_fd > MAX_FD) 317 panic("sim_fd_obj called in fd out of range."); 318 319 return &fd_map[tgt_fd]; 320} 321bool 322Process::checkAndAllocNextPage(Addr vaddr) 323{ 324 // if this is an initial write we might not have 325 if (vaddr >= stack_min && vaddr < stack_base) { 326 pTable->allocate(roundDown(vaddr, VMPageSize), VMPageSize); 327 return true; 328 } 329 330 // We've accessed the next page of the stack, so extend the stack 331 // to cover it. 332 if (vaddr < stack_min && vaddr >= stack_base - max_stack_size) { 333 while (vaddr < stack_min) { 334 stack_min -= TheISA::PageBytes; 335 if(stack_base - stack_min > max_stack_size) 336 fatal("Maximum stack size exceeded\n"); 337 if(stack_base - stack_min > 8*1024*1024) 338 fatal("Over max stack size for one thread\n"); 339 pTable->allocate(stack_min, TheISA::PageBytes); 340 warn("Increasing stack size by one page."); 341 }; 342 return true; 343 } 344 return false; 345} 346 347 // find all offsets for currently open files and save them 348void 349Process::fix_file_offsets() { 350 Process::FdMap *fdo_stdin = &fd_map[STDIN_FILENO]; 351 Process::FdMap *fdo_stdout = &fd_map[STDOUT_FILENO]; 352 Process::FdMap *fdo_stderr = &fd_map[STDERR_FILENO]; 353 string in = fdo_stdin->filename; 354 string out = fdo_stdout->filename; 355 356 // initialize file descriptors to default: same as simulator 357 int stdin_fd, stdout_fd, stderr_fd; 358 359 if (in == "stdin" || in == "cin") 360 stdin_fd = STDIN_FILENO; 361 else if (in == "None") 362 stdin_fd = -1; 363 else{ 364 //OPEN standard in and seek to the right location 365 stdin_fd = Process::openInputFile(in); 366 if (lseek(stdin_fd, fdo_stdin->fileOffset, SEEK_SET) < 0) 367 panic("Unable to seek to correct location in file: %s", in); 368 } 369 370 if (out == "stdout" || out == "cout") 371 stdout_fd = STDOUT_FILENO; 372 else if (out == "stderr" || out == "cerr") 373 stdout_fd = STDERR_FILENO; 374 else if (out == "None") 375 stdout_fd = -1; 376 else{ 377 stdout_fd = Process::openOutputFile(out); 378 if (lseek(stdin_fd, fdo_stdout->fileOffset, SEEK_SET) < 0) 379 panic("Unable to seek to correct in file: %s", out); 380 } 381 382 stderr_fd = (stdout_fd != STDOUT_FILENO) ? stdout_fd : STDERR_FILENO; 383 384 fdo_stdin->fd = stdin_fd; 385 fdo_stdout->fd = stdout_fd; 386 fdo_stderr->fd = stderr_fd; 387 388 389 for (int free_fd = 3; free_fd <= MAX_FD; ++free_fd) { 390 Process::FdMap *fdo = &fd_map[free_fd]; 391 if (fdo->fd != -1) { 392 if (fdo->isPipe){ 393 if (fdo->filename == "PIPE-WRITE") 394 continue; 395 else { 396 assert (fdo->filename == "PIPE-READ"); 397 //create a new pipe 398 int fds[2]; 399 int pipe_retval = pipe(fds); 400 401 if (pipe_retval < 0) { 402 // error 403 panic("Unable to create new pipe."); 404 } 405 fdo->fd = fds[0]; //set read pipe 406 Process::FdMap *fdo_write = &fd_map[fdo->readPipeSource]; 407 if (fdo_write->filename != "PIPE-WRITE") 408 panic ("Couldn't find write end of the pipe"); 409 410 fdo_write->fd = fds[1];//set write pipe 411 } 412 } else { 413 //Open file 414 int fd = open(fdo->filename.c_str(), fdo->flags, fdo->mode); 415 416 if (fd == -1) 417 panic("Unable to open file: %s", fdo->filename); 418 fdo->fd = fd; 419 420 //Seek to correct location before checkpoint 421 if (lseek(fd,fdo->fileOffset, SEEK_SET) < 0) 422 panic("Unable to seek to correct location in file: %s", fdo->filename); 423 } 424 } 425 } 426} 427void 428Process::find_file_offsets(){ 429 for (int free_fd = 0; free_fd <= MAX_FD; ++free_fd) { 430 Process::FdMap *fdo = &fd_map[free_fd]; 431 if (fdo->fd != -1) { 432 fdo->fileOffset = lseek(fdo->fd, 0, SEEK_CUR); 433 } else { 434 fdo->filename = "NULL"; 435 fdo->fileOffset = 0; 436 } 437 } 438} 439 440void 441Process::setReadPipeSource(int read_pipe_fd, int source_fd){ 442 Process::FdMap *fdo = &fd_map[read_pipe_fd]; 443 fdo->readPipeSource = source_fd; 444} 445 446void 447Process::FdMap::serialize(std::ostream &os) 448{ 449 SERIALIZE_SCALAR(fd); 450 SERIALIZE_SCALAR(isPipe); 451 SERIALIZE_SCALAR(filename); 452 SERIALIZE_SCALAR(flags); 453 SERIALIZE_SCALAR(readPipeSource); 454 SERIALIZE_SCALAR(fileOffset); 455} 456 457void 458Process::FdMap::unserialize(Checkpoint *cp, const std::string §ion) 459{ 460 UNSERIALIZE_SCALAR(fd); 461 UNSERIALIZE_SCALAR(isPipe); 462 UNSERIALIZE_SCALAR(filename); 463 UNSERIALIZE_SCALAR(flags); 464 UNSERIALIZE_SCALAR(readPipeSource); 465 UNSERIALIZE_SCALAR(fileOffset); 466} 467 468void 469Process::serialize(std::ostream &os) 470{ 471 SERIALIZE_SCALAR(initialContextLoaded); 472 SERIALIZE_SCALAR(brk_point); 473 SERIALIZE_SCALAR(stack_base); 474 SERIALIZE_SCALAR(stack_size); 475 SERIALIZE_SCALAR(stack_min); 476 SERIALIZE_SCALAR(next_thread_stack_base); 477 SERIALIZE_SCALAR(mmap_start); 478 SERIALIZE_SCALAR(mmap_end); 479 SERIALIZE_SCALAR(nxm_start); 480 SERIALIZE_SCALAR(nxm_end); 481 find_file_offsets(); 482 pTable->serialize(os); 483 for (int x = 0; x <= MAX_FD; x++) { 484 nameOut(os, csprintf("%s.FdMap%d", name(), x)); 485 fd_map[x].serialize(os); 486 } 487 488} 489 490void 491Process::unserialize(Checkpoint *cp, const std::string §ion) 492{ 493 UNSERIALIZE_SCALAR(initialContextLoaded); 494 UNSERIALIZE_SCALAR(brk_point); 495 UNSERIALIZE_SCALAR(stack_base); 496 UNSERIALIZE_SCALAR(stack_size); 497 UNSERIALIZE_SCALAR(stack_min); 498 UNSERIALIZE_SCALAR(next_thread_stack_base); 499 UNSERIALIZE_SCALAR(mmap_start); 500 UNSERIALIZE_SCALAR(mmap_end); 501 UNSERIALIZE_SCALAR(nxm_start); 502 UNSERIALIZE_SCALAR(nxm_end); 503 pTable->unserialize(cp, section); 504 for (int x = 0; x <= MAX_FD; x++) { 505 fd_map[x].unserialize(cp, csprintf("%s.FdMap%d", section, x)); 506 } 507 fix_file_offsets(); 508 509 checkpointRestored = true; 510 511} 512 513 514//////////////////////////////////////////////////////////////////////// 515// 516// LiveProcess member definitions 517// 518//////////////////////////////////////////////////////////////////////// 519 520 521LiveProcess::LiveProcess(LiveProcessParams * params, ObjectFile *_objFile) 522 : Process(params), objFile(_objFile), 523 argv(params->cmd), envp(params->env), cwd(params->cwd) 524{ 525 __uid = params->uid; 526 __euid = params->euid; 527 __gid = params->gid; 528 __egid = params->egid; 529 __pid = params->pid; 530 __ppid = params->ppid; 531 532 prog_fname = params->cmd[0]; 533 534 // load up symbols, if any... these may be used for debugging or 535 // profiling. 536 if (!debugSymbolTable) { 537 debugSymbolTable = new SymbolTable(); 538 if (!objFile->loadGlobalSymbols(debugSymbolTable) || 539 !objFile->loadLocalSymbols(debugSymbolTable)) { 540 // didn't load any symbols 541 delete debugSymbolTable; 542 debugSymbolTable = NULL; 543 } 544 } 545} 546 547void 548LiveProcess::argsInit(int intSize, int pageSize) 549{ 550 Process::startup(); 551 552 // load object file into target memory 553 objFile->loadSections(initVirtMem); 554 555 // Calculate how much space we need for arg & env arrays. 556 int argv_array_size = intSize * (argv.size() + 1); 557 int envp_array_size = intSize * (envp.size() + 1); 558 int arg_data_size = 0; 559 for (int i = 0; i < argv.size(); ++i) { 560 arg_data_size += argv[i].size() + 1; 561 } 562 int env_data_size = 0; 563 for (int i = 0; i < envp.size(); ++i) { 564 env_data_size += envp[i].size() + 1; 565 } 566 567 int space_needed = 568 argv_array_size + envp_array_size + arg_data_size + env_data_size; 569 if (space_needed < 32*1024) 570 space_needed = 32*1024; 571 572 // set bottom of stack 573 stack_min = stack_base - space_needed; 574 // align it 575 stack_min = roundDown(stack_min, pageSize); 576 stack_size = stack_base - stack_min; 577 // map memory 578 pTable->allocate(stack_min, roundUp(stack_size, pageSize)); 579 580 // map out initial stack contents 581 Addr argv_array_base = stack_min + intSize; // room for argc 582 Addr envp_array_base = argv_array_base + argv_array_size; 583 Addr arg_data_base = envp_array_base + envp_array_size; 584 Addr env_data_base = arg_data_base + arg_data_size; 585 586 // write contents to stack 587 uint64_t argc = argv.size(); 588 if (intSize == 8) 589 argc = htog((uint64_t)argc); 590 else if (intSize == 4) 591 argc = htog((uint32_t)argc); 592 else 593 panic("Unknown int size"); 594 595 initVirtMem->writeBlob(stack_min, (uint8_t*)&argc, intSize); 596 597 copyStringArray(argv, argv_array_base, arg_data_base, initVirtMem); 598 copyStringArray(envp, envp_array_base, env_data_base, initVirtMem); 599 600 assert(NumArgumentRegs >= 2); 601 threadContexts[0]->setIntReg(ArgumentReg[0], argc); 602 threadContexts[0]->setIntReg(ArgumentReg[1], argv_array_base); 603 threadContexts[0]->setIntReg(StackPointerReg, stack_min); 604 605 Addr prog_entry = objFile->entryPoint(); 606 threadContexts[0]->setPC(prog_entry); 607 threadContexts[0]->setNextPC(prog_entry + sizeof(MachInst)); 608 609#if THE_ISA != ALPHA_ISA //e.g. MIPS or Sparc 610 threadContexts[0]->setNextNPC(prog_entry + (2 * sizeof(MachInst))); 611#endif 612 613 num_processes++; 614} 615 616void 617LiveProcess::syscall(int64_t callnum, ThreadContext *tc) 618{ 619 num_syscalls++; 620 621 SyscallDesc *desc = getDesc(callnum); 622 if (desc == NULL) 623 fatal("Syscall %d out of range", callnum); 624 625 desc->doSyscall(callnum, this, tc); 626} 627 628LiveProcess * 629LiveProcess::create(LiveProcessParams * params) 630{ 631 LiveProcess *process = NULL; 632 633 string executable = 634 params->executable == "" ? params->cmd[0] : params->executable; 635 ObjectFile *objFile = createObjectFile(executable); 636 if (objFile == NULL) { 637 fatal("Can't load object file %s", executable); 638 } 639 640 if (objFile->isDynamic()) 641 fatal("Object file is a dynamic executable however only static " 642 "executables are supported!\n Please recompile your " 643 "executable as a static binary and try again.\n"); 644 645#if THE_ISA == ALPHA_ISA 646 if (objFile->hasTLS()) 647 fatal("Object file has a TLS section and single threaded TLS is not\n" 648 " currently supported for Alpha! Please recompile your " 649 "executable with \n a non-TLS toolchain.\n"); 650 651 if (objFile->getArch() != ObjectFile::Alpha) 652 fatal("Object file architecture does not match compiled ISA (Alpha)."); 653 switch (objFile->getOpSys()) { 654 case ObjectFile::Tru64: 655 process = new AlphaTru64Process(params, objFile); 656 break; 657 658 case ObjectFile::Linux: 659 process = new AlphaLinuxProcess(params, objFile); 660 break; 661 662 default: 663 fatal("Unknown/unsupported operating system."); 664 } 665#elif THE_ISA == SPARC_ISA 666 if (objFile->getArch() != ObjectFile::SPARC64 && objFile->getArch() != ObjectFile::SPARC32) 667 fatal("Object file architecture does not match compiled ISA (SPARC)."); 668 switch (objFile->getOpSys()) { 669 case ObjectFile::Linux: 670 if (objFile->getArch() == ObjectFile::SPARC64) { 671 process = new Sparc64LinuxProcess(params, objFile); 672 } else { 673 process = new Sparc32LinuxProcess(params, objFile); 674 } 675 break; 676 677 678 case ObjectFile::Solaris: 679 process = new SparcSolarisProcess(params, objFile); 680 break; 681 default: 682 fatal("Unknown/unsupported operating system."); 683 } 684#elif THE_ISA == X86_ISA 685 if (objFile->getArch() != ObjectFile::X86) 686 fatal("Object file architecture does not match compiled ISA (x86)."); 687 switch (objFile->getOpSys()) { 688 case ObjectFile::Linux: 689 process = new X86LinuxProcess(params, objFile); 690 break; 691 default: 692 fatal("Unknown/unsupported operating system."); 693 } 694#elif THE_ISA == MIPS_ISA 695 if (objFile->getArch() != ObjectFile::Mips) 696 fatal("Object file architecture does not match compiled ISA (MIPS)."); 697 switch (objFile->getOpSys()) { 698 case ObjectFile::Linux: 699 process = new MipsLinuxProcess(params, objFile); 700 break; 701 702 default: 703 fatal("Unknown/unsupported operating system."); 704 } 705#elif THE_ISA == ARM_ISA 706 if (objFile->getArch() != ObjectFile::Arm) 707 fatal("Object file architecture does not match compiled ISA (ARM)."); 708 switch (objFile->getOpSys()) { 709 case ObjectFile::Linux: 710 process = new ArmLinuxProcess(params, objFile); 711 break; 712 713 default: 714 fatal("Unknown/unsupported operating system."); 715 } 716#else 717#error "THE_ISA not set" 718#endif 719 720 721 if (process == NULL) 722 fatal("Unknown error creating process object."); 723 return process; 724} 725 726LiveProcess * 727LiveProcessParams::create() 728{ 729 return LiveProcess::create(this); 730} 731