port.hh revision 2665
1/*
2 * Copyright (c) 2002-2005 The Regents of The University of Michigan
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions are
7 * met: redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer;
9 * redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution;
12 * neither the name of the copyright holders nor the names of its
13 * contributors may be used to endorse or promote products derived from
14 * this software without specific prior written permission.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 *
28 * Authors: Ron Dreslinski
29 */
30
31/**
32 * @file
33 * Port Object Decleration. Ports are used to interface memory objects to
34 * each other.  They will always come in pairs, and we refer to the other
35 * port object as the peer.  These are used to make the design more
36 * modular so that a specific interface between every type of objcet doesn't
37 * have to be created.
38 */
39
40#ifndef __MEM_PORT_HH__
41#define __MEM_PORT_HH__
42
43#include <list>
44#include <inttypes.h>
45
46#include "base/misc.hh"
47#include "base/range.hh"
48#include "mem/packet.hh"
49#include "mem/request.hh"
50
51/** This typedef is used to clean up the parameter list of
52 * getDeviceAddressRanges() and getPeerAddressRanges().  It's declared
53 * outside the Port object since it's also used by some mem objects.
54 * Eventually we should move this typedef to wherever Addr is
55 * defined.
56 */
57
58typedef std::list<Range<Addr> > AddrRangeList;
59typedef std::list<Range<Addr> >::iterator AddrRangeIter;
60
61/**
62 * Ports are used to interface memory objects to
63 * each other.  They will always come in pairs, and we refer to the other
64 * port object as the peer.  These are used to make the design more
65 * modular so that a specific interface between every type of objcet doesn't
66 * have to be created.
67 *
68 * Recv accesor functions are being called from the peer interface.
69 * Send accessor functions are being called from the device the port is
70 * associated with, and it will call the peer recv. accessor function.
71 */
72class Port
73{
74  private:
75
76    /** Descriptive name (for DPRINTF output) */
77    const std::string portName;
78
79    /** A pointer to the peer port.  Ports always come in pairs, that way they
80        can use a standardized interface to communicate between different
81        memory objects. */
82    Port *peer;
83
84  public:
85
86    /**
87     * Constructor.
88     *
89     * @param _name Port name for DPRINTF output.  Should include name
90     * of memory system object to which the port belongs.
91     */
92    Port(const std::string &_name)
93        : portName(_name), peer(NULL)
94    { }
95
96    /** Return port name (for DPRINTF). */
97    const std::string &name() const { return portName; }
98
99    virtual ~Port() {};
100
101    // mey be better to use subclasses & RTTI?
102    /** Holds the ports status.  Currently just that a range recomputation needs
103     * to be done. */
104    enum Status {
105        RangeChange
106    };
107
108    /** Function to set the pointer for the peer port.
109        @todo should be called by the configuration stuff (python).
110    */
111    void setPeer(Port *port);
112
113    /** Function to set the pointer for the peer port.
114        @todo should be called by the configuration stuff (python).
115    */
116    Port *getPeer() { return peer; }
117
118  protected:
119
120    /** These functions are protected because they should only be
121     * called by a peer port, never directly by any outside object. */
122
123    /** Called to recive a timing call from the peer port. */
124    virtual bool recvTiming(Packet *pkt) = 0;
125
126    /** Called to recive a atomic call from the peer port. */
127    virtual Tick recvAtomic(Packet *pkt) = 0;
128
129    /** Called to recive a functional call from the peer port. */
130    virtual void recvFunctional(Packet *pkt) = 0;
131
132    /** Called to recieve a status change from the peer port. */
133    virtual void recvStatusChange(Status status) = 0;
134
135    /** Called by a peer port if the send was unsuccesful, and had to
136        wait.  This shouldn't be valid for response paths (IO Devices).
137        so it is set to panic if it isn't already defined.
138    */
139    virtual void recvRetry() { panic("??"); }
140
141    /** Called by a peer port in order to determine the block size of the
142        device connected to this port.  It sometimes doesn't make sense for
143        this function to be called, a DMA interface doesn't really have a
144        block size, so it is defaulted to a panic.
145    */
146    virtual int deviceBlockSize() { panic("??"); }
147
148    /** The peer port is requesting us to reply with a list of the ranges we
149        are responsible for.
150        @param resp is a list of ranges responded to
151        @param snoop is a list of ranges snooped
152    */
153    virtual void getDeviceAddressRanges(AddrRangeList &resp,
154            AddrRangeList &snoop)
155    { panic("??"); }
156
157  public:
158
159    /** Function called by associated memory device (cache, memory, iodevice)
160        in order to send a timing request to the port.  Simply calls the peer
161        port receive function.
162        @return This function returns if the send was succesful in it's
163        recieve. If it was a failure, then the port will wait for a recvRetry
164        at which point it can possibly issue a successful sendTiming.  This is used in
165        case a cache has a higher priority request come in while waiting for
166        the bus to arbitrate.
167    */
168    bool sendTiming(Packet *pkt) { return peer->recvTiming(pkt); }
169
170    /** Function called by the associated device to send an atomic
171     *   access, an access in which the data is moved and the state is
172     *   updated in one cycle, without interleaving with other memory
173     *   accesses.  Returns estimated latency of access.
174     */
175    Tick sendAtomic(Packet *pkt)
176        { return peer->recvAtomic(pkt); }
177
178    /** Function called by the associated device to send a functional access,
179        an access in which the data is instantly updated everywhere in the
180        memory system, without affecting the current state of any block or
181        moving the block.
182    */
183    void sendFunctional(Packet *pkt)
184        { return peer->recvFunctional(pkt); }
185
186    /** Called by the associated device to send a status change to the device
187        connected to the peer interface.
188    */
189    void sendStatusChange(Status status) {peer->recvStatusChange(status); }
190
191    /** When a timing access doesn't return a success, some time later the
192        Retry will be sent.
193    */
194    void sendRetry() { return peer->recvRetry(); }
195
196    /** Called by the associated device if it wishes to find out the blocksize
197        of the device on attached to the peer port.
198    */
199    int peerBlockSize() { return peer->deviceBlockSize(); }
200
201    /** Called by the associated device if it wishes to find out the address
202        ranges connected to the peer ports devices.
203    */
204    void getPeerAddressRanges(AddrRangeList &resp, AddrRangeList &snoop)
205    { peer->getDeviceAddressRanges(resp, snoop); }
206
207    /** This function is a wrapper around sendFunctional()
208        that breaks a larger, arbitrarily aligned access into
209        appropriate chunks.  The default implementation can use
210        getBlockSize() to determine the block size and go from there.
211    */
212    virtual void readBlob(Addr addr, uint8_t *p, int size);
213
214    /** This function is a wrapper around sendFunctional()
215        that breaks a larger, arbitrarily aligned access into
216        appropriate chunks.  The default implementation can use
217        getBlockSize() to determine the block size and go from there.
218    */
219    virtual void writeBlob(Addr addr, uint8_t *p, int size);
220
221    /** Fill size bytes starting at addr with byte value val.  This
222        should not need to be virtual, since it can be implemented in
223        terms of writeBlob().  However, it shouldn't be
224        performance-critical either, so it could be if we wanted to.
225    */
226    virtual void memsetBlob(Addr addr, uint8_t val, int size);
227
228  private:
229
230    /** Internal helper function for read/writeBlob().
231     */
232    void blobHelper(Addr addr, uint8_t *p, int size, Packet::Command cmd);
233};
234
235/** A simple functional port that is only meant for one way communication to
236 * physical memory. It is only meant to be used to load data into memory before
237 * the simulation begins.
238 */
239
240class FunctionalPort : public Port
241{
242  public:
243    FunctionalPort(const std::string &_name)
244        : Port(_name)
245    {}
246
247    virtual bool recvTiming(Packet *pkt) { panic("FuncPort is UniDir"); }
248    virtual Tick recvAtomic(Packet *pkt) { panic("FuncPort is UniDir"); }
249    virtual void recvFunctional(Packet *pkt) { panic("FuncPort is UniDir"); }
250    virtual void recvStatusChange(Status status) {}
251
252    template <typename T>
253    inline void write(Addr addr, T d)
254    {
255        writeBlob(addr, (uint8_t*)&d, sizeof(T));
256    }
257
258    template <typename T>
259    inline T read(Addr addr)
260    {
261        T d;
262        readBlob(addr, (uint8_t*)&d, sizeof(T));
263        return d;
264    }
265};
266
267#endif //__MEM_PORT_HH__
268