packet.cc revision 4874:cdae9adbd276
1/*
2 * Copyright (c) 2006 The Regents of The University of Michigan
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions are
7 * met: redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer;
9 * redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution;
12 * neither the name of the copyright holders nor the names of its
13 * contributors may be used to endorse or promote products derived from
14 * this software without specific prior written permission.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 *
28 * Authors: Ali Saidi
29 *          Steve Reinhardt
30 */
31
32/**
33 * @file
34 * Definition of the Packet Class, a packet is a transaction occuring
35 * between a single level of the memory heirarchy (ie L1->L2).
36 */
37
38#include <iostream>
39#include <cstring>
40#include "base/misc.hh"
41#include "base/trace.hh"
42#include "mem/packet.hh"
43
44// The one downside to bitsets is that static initializers can get ugly.
45#define SET1(a1)                     (1 << (a1))
46#define SET2(a1, a2)                 (SET1(a1) | SET1(a2))
47#define SET3(a1, a2, a3)             (SET2(a1, a2) | SET1(a3))
48#define SET4(a1, a2, a3, a4)         (SET3(a1, a2, a3) | SET1(a4))
49#define SET5(a1, a2, a3, a4, a5)     (SET4(a1, a2, a3, a4) | SET1(a5))
50#define SET6(a1, a2, a3, a4, a5, a6) (SET5(a1, a2, a3, a4, a5) | SET1(a6))
51
52const MemCmd::CommandInfo
53MemCmd::commandInfo[] =
54{
55    /* InvalidCmd */
56    { 0, InvalidCmd, "InvalidCmd" },
57    /* ReadReq */
58    { SET3(IsRead, IsRequest, NeedsResponse), ReadResp, "ReadReq" },
59    /* ReadResp */
60    { SET3(IsRead, IsResponse, HasData), InvalidCmd, "ReadResp" },
61    /* WriteReq */
62    { SET5(IsWrite, NeedsExclusive, IsRequest, NeedsResponse, HasData),
63            WriteResp, "WriteReq" },
64    /* WriteResp */
65    { SET3(IsWrite, NeedsExclusive, IsResponse), InvalidCmd, "WriteResp" },
66    /* Writeback */
67    { SET4(IsWrite, NeedsExclusive, IsRequest, HasData),
68            InvalidCmd, "Writeback" },
69    /* SoftPFReq */
70    { SET4(IsRead, IsRequest, IsSWPrefetch, NeedsResponse),
71            SoftPFResp, "SoftPFReq" },
72    /* HardPFReq */
73    { SET4(IsRead, IsRequest, IsHWPrefetch, NeedsResponse),
74            HardPFResp, "HardPFReq" },
75    /* SoftPFResp */
76    { SET4(IsRead, IsResponse, IsSWPrefetch, HasData),
77            InvalidCmd, "SoftPFResp" },
78    /* HardPFResp */
79    { SET4(IsRead, IsResponse, IsHWPrefetch, HasData),
80            InvalidCmd, "HardPFResp" },
81    /* WriteInvalidateReq */
82    { SET6(IsWrite, NeedsExclusive, IsInvalidate,
83           IsRequest, HasData, NeedsResponse),
84            WriteInvalidateResp, "WriteInvalidateReq" },
85    /* WriteInvalidateResp */
86    { SET4(IsWrite, NeedsExclusive, IsInvalidate, IsResponse),
87            InvalidCmd, "WriteInvalidateResp" },
88    /* UpgradeReq */
89    { SET4(IsInvalidate, NeedsExclusive, IsRequest, NeedsResponse),
90            UpgradeResp, "UpgradeReq" },
91    /* UpgradeResp */
92    { SET3(IsInvalidate, NeedsExclusive, IsResponse),
93            InvalidCmd, "UpgradeResp" },
94    /* ReadExReq */
95    { SET5(IsRead, NeedsExclusive, IsInvalidate, IsRequest, NeedsResponse),
96            ReadExResp, "ReadExReq" },
97    /* ReadExResp */
98    { SET5(IsRead, NeedsExclusive, IsInvalidate, IsResponse, HasData),
99            InvalidCmd, "ReadExResp" },
100    /* LoadLockedReq */
101    { SET4(IsRead, IsLocked, IsRequest, NeedsResponse),
102            ReadResp, "LoadLockedReq" },
103    /* LoadLockedResp */
104    { SET4(IsRead, IsLocked, IsResponse, HasData),
105            InvalidCmd, "LoadLockedResp" },
106    /* StoreCondReq */
107    { SET6(IsWrite, NeedsExclusive, IsLocked,
108           IsRequest, NeedsResponse, HasData),
109            StoreCondResp, "StoreCondReq" },
110    /* StoreCondResp */
111    { SET4(IsWrite, NeedsExclusive, IsLocked, IsResponse),
112            InvalidCmd, "StoreCondResp" },
113    /* SwapReq -- for Swap ldstub type operations */
114    { SET6(IsRead, IsWrite, NeedsExclusive, IsRequest, HasData, NeedsResponse),
115        SwapResp, "SwapReq" },
116    /* SwapResp -- for Swap ldstub type operations */
117    { SET5(IsRead, IsWrite, NeedsExclusive, IsResponse, HasData),
118            InvalidCmd, "SwapResp" },
119    /* NetworkNackError  -- nacked at network layer (not by protocol) */
120    { SET2(IsRequest, IsError), InvalidCmd, "NetworkNackError" },
121    /* InvalidDestError  -- packet dest field invalid */
122    { SET2(IsRequest, IsError), InvalidCmd, "InvalidDestError" },
123    /* BadAddressError   -- memory address invalid */
124    { SET2(IsRequest, IsError), InvalidCmd, "BadAddressError" }
125};
126
127
128/** delete the data pointed to in the data pointer. Ok to call to matter how
129 * data was allocted. */
130void
131Packet::deleteData()
132{
133    assert(staticData || dynamicData);
134    if (staticData)
135        return;
136
137    if (arrayData)
138        delete [] data;
139    else
140        delete data;
141}
142
143/** If there isn't data in the packet, allocate some. */
144void
145Packet::allocate()
146{
147    if (data)
148        return;
149    assert(!staticData);
150    dynamicData = true;
151    arrayData = true;
152    data = new uint8_t[getSize()];
153}
154
155/** Do the packet modify the same addresses. */
156bool
157Packet::intersect(PacketPtr p)
158{
159    Addr s1 = getAddr();
160    Addr e1 = getAddr() + getSize() - 1;
161    Addr s2 = p->getAddr();
162    Addr e2 = p->getAddr() + p->getSize() - 1;
163
164    return !(s1 > e2 || e1 < s2);
165}
166
167
168bool
169Packet::checkFunctional(Addr addr, int size, uint8_t *data)
170{
171    Addr func_start = getAddr();
172    Addr func_end   = getAddr() + getSize() - 1;
173    Addr val_start  = addr;
174    Addr val_end    = val_start + size - 1;
175
176    if (func_start > val_end || val_start > func_end) {
177        // no intersection
178        return false;
179    }
180
181    // offset of functional request into supplied value (could be
182    // negative if partial overlap)
183    int offset = func_start - val_start;
184
185    if (isRead()) {
186        if (func_start >= val_start && func_end <= val_end) {
187            allocate();
188            std::memcpy(getPtr<uint8_t>(), data + offset, getSize());
189            makeResponse();
190            return true;
191        } else {
192            // In this case the timing packet only partially satisfies
193            // the request, so we would need more information to make
194            // this work.  Like bytes valid in the packet or
195            // something, so the request could continue and get this
196            // bit of possibly newer data along with the older data
197            // not written to yet.
198            panic("Memory value only partially satisfies the functional "
199                  "request. Now what?");
200        }
201    } else if (isWrite()) {
202        if (offset >= 0) {
203            std::memcpy(data + offset, getPtr<uint8_t>(),
204                        (std::min(func_end, val_end) - func_start) + 1);
205        } else { // val_start > func_start
206            std::memcpy(data, getPtr<uint8_t>() - offset,
207                        (std::min(func_end, val_end) - val_start) + 1);
208        }
209        // we always want to keep going with a write
210        return false;
211    } else
212        panic("Don't know how to handle command %s\n", cmdString());
213}
214
215
216std::ostream &
217operator<<(std::ostream &o, const Packet &p)
218{
219
220    o << "[0x";
221    o.setf(std::ios_base::hex, std::ios_base::showbase);
222    o <<  p.getAddr();
223    o.unsetf(std::ios_base::hex| std::ios_base::showbase);
224    o <<  ":";
225    o.setf(std::ios_base::hex, std::ios_base::showbase);
226    o <<  p.getAddr() + p.getSize() - 1 << "] ";
227    o.unsetf(std::ios_base::hex| std::ios_base::showbase);
228
229    if (p.isRead())
230        o << "Read ";
231    if (p.isWrite())
232        o << "Write ";
233    if (p.isInvalidate())
234        o << "Invalidate ";
235    if (p.isRequest())
236        o << "Request ";
237    if (p.isResponse())
238        o << "Response ";
239    if (p.hasData())
240        o << "w/Data ";
241
242    o << std::endl;
243    return o;
244}
245
246