base.hh revision 10821
1/* 2 * Copyright (c) 2012-2013, 2015 ARM Limited 3 * All rights reserved. 4 * 5 * The license below extends only to copyright in the software and shall 6 * not be construed as granting a license to any other intellectual 7 * property including but not limited to intellectual property relating 8 * to a hardware implementation of the functionality of the software 9 * licensed hereunder. You may use the software subject to the license 10 * terms below provided that you ensure that this notice is replicated 11 * unmodified and in its entirety in all distributions of the software, 12 * modified or unmodified, in source code or in binary form. 13 * 14 * Copyright (c) 2003-2005 The Regents of The University of Michigan 15 * All rights reserved. 16 * 17 * Redistribution and use in source and binary forms, with or without 18 * modification, are permitted provided that the following conditions are 19 * met: redistributions of source code must retain the above copyright 20 * notice, this list of conditions and the following disclaimer; 21 * redistributions in binary form must reproduce the above copyright 22 * notice, this list of conditions and the following disclaimer in the 23 * documentation and/or other materials provided with the distribution; 24 * neither the name of the copyright holders nor the names of its 25 * contributors may be used to endorse or promote products derived from 26 * this software without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 39 * 40 * Authors: Erik Hallnor 41 * Steve Reinhardt 42 * Ron Dreslinski 43 */ 44 45/** 46 * @file 47 * Declares a basic cache interface BaseCache. 48 */ 49 50#ifndef __BASE_CACHE_HH__ 51#define __BASE_CACHE_HH__ 52 53#include <algorithm> 54#include <list> 55#include <string> 56#include <vector> 57 58#include "base/misc.hh" 59#include "base/statistics.hh" 60#include "base/trace.hh" 61#include "base/types.hh" 62#include "debug/Cache.hh" 63#include "debug/CachePort.hh" 64#include "mem/cache/mshr_queue.hh" 65#include "mem/mem_object.hh" 66#include "mem/packet.hh" 67#include "mem/qport.hh" 68#include "mem/request.hh" 69#include "params/BaseCache.hh" 70#include "sim/eventq.hh" 71#include "sim/full_system.hh" 72#include "sim/sim_exit.hh" 73#include "sim/system.hh" 74 75class MSHR; 76/** 77 * A basic cache interface. Implements some common functions for speed. 78 */ 79class BaseCache : public MemObject 80{ 81 /** 82 * Indexes to enumerate the MSHR queues. 83 */ 84 enum MSHRQueueIndex { 85 MSHRQueue_MSHRs, 86 MSHRQueue_WriteBuffer 87 }; 88 89 public: 90 /** 91 * Reasons for caches to be blocked. 92 */ 93 enum BlockedCause { 94 Blocked_NoMSHRs = MSHRQueue_MSHRs, 95 Blocked_NoWBBuffers = MSHRQueue_WriteBuffer, 96 Blocked_NoTargets, 97 NUM_BLOCKED_CAUSES 98 }; 99 100 /** 101 * Reasons for cache to request a bus. 102 */ 103 enum RequestCause { 104 Request_MSHR = MSHRQueue_MSHRs, 105 Request_WB = MSHRQueue_WriteBuffer, 106 Request_PF, 107 NUM_REQUEST_CAUSES 108 }; 109 110 protected: 111 112 /** 113 * A cache master port is used for the memory-side port of the 114 * cache, and in addition to the basic timing port that only sends 115 * response packets through a transmit list, it also offers the 116 * ability to schedule and send request packets (requests & 117 * writebacks). The send event is scheduled through requestBus, 118 * and the sendDeferredPacket of the timing port is modified to 119 * consider both the transmit list and the requests from the MSHR. 120 */ 121 class CacheMasterPort : public QueuedMasterPort 122 { 123 124 public: 125 126 /** 127 * Schedule a send of a request packet (from the MSHR). Note 128 * that we could already have a retry outstanding. 129 */ 130 void requestBus(RequestCause cause, Tick time) 131 { 132 DPRINTF(CachePort, "Scheduling request at %llu due to %d\n", 133 time, cause); 134 reqQueue.schedSendEvent(time); 135 } 136 137 protected: 138 139 CacheMasterPort(const std::string &_name, BaseCache *_cache, 140 ReqPacketQueue &_reqQueue, 141 SnoopRespPacketQueue &_snoopRespQueue) : 142 QueuedMasterPort(_name, _cache, _reqQueue, _snoopRespQueue) 143 { } 144 145 /** 146 * Memory-side port always snoops. 147 * 148 * @return always true 149 */ 150 virtual bool isSnooping() const { return true; } 151 }; 152 153 /** 154 * A cache slave port is used for the CPU-side port of the cache, 155 * and it is basically a simple timing port that uses a transmit 156 * list for responses to the CPU (or connected master). In 157 * addition, it has the functionality to block the port for 158 * incoming requests. If blocked, the port will issue a retry once 159 * unblocked. 160 */ 161 class CacheSlavePort : public QueuedSlavePort 162 { 163 164 public: 165 166 /** Do not accept any new requests. */ 167 void setBlocked(); 168 169 /** Return to normal operation and accept new requests. */ 170 void clearBlocked(); 171 172 bool isBlocked() const { return blocked; } 173 174 protected: 175 176 CacheSlavePort(const std::string &_name, BaseCache *_cache, 177 const std::string &_label); 178 179 /** A normal packet queue used to store responses. */ 180 RespPacketQueue queue; 181 182 bool blocked; 183 184 bool mustSendRetry; 185 186 private: 187 188 void processSendRetry(); 189 190 EventWrapper<CacheSlavePort, 191 &CacheSlavePort::processSendRetry> sendRetryEvent; 192 193 }; 194 195 CacheSlavePort *cpuSidePort; 196 CacheMasterPort *memSidePort; 197 198 protected: 199 200 /** Miss status registers */ 201 MSHRQueue mshrQueue; 202 203 /** Write/writeback buffer */ 204 MSHRQueue writeBuffer; 205 206 /** 207 * Allocate a buffer, passing the time indicating when schedule an 208 * event to the queued port to go and ask the MSHR and write queue 209 * if they have packets to send. 210 * 211 * allocateBufferInternal() function is called in: 212 * - MSHR allocateWriteBuffer (unchached write forwarded to WriteBuffer); 213 * - MSHR allocateMissBuffer (miss in MSHR queue); 214 */ 215 MSHR *allocateBufferInternal(MSHRQueue *mq, Addr addr, int size, 216 PacketPtr pkt, Tick time, bool requestBus) 217 { 218 // check that the address is block aligned since we rely on 219 // this in a number of places when checking for matches and 220 // overlap 221 assert(addr == blockAlign(addr)); 222 223 MSHR *mshr = mq->allocate(addr, size, pkt, time, order++); 224 225 if (mq->isFull()) { 226 setBlocked((BlockedCause)mq->index); 227 } 228 229 if (requestBus) { 230 requestMemSideBus((RequestCause)mq->index, time); 231 } 232 233 return mshr; 234 } 235 236 void markInServiceInternal(MSHR *mshr, bool pending_dirty_resp) 237 { 238 MSHRQueue *mq = mshr->queue; 239 bool wasFull = mq->isFull(); 240 mq->markInService(mshr, pending_dirty_resp); 241 if (wasFull && !mq->isFull()) { 242 clearBlocked((BlockedCause)mq->index); 243 } 244 } 245 246 /** 247 * Write back dirty blocks in the cache using functional accesses. 248 */ 249 virtual void memWriteback() = 0; 250 /** 251 * Invalidates all blocks in the cache. 252 * 253 * @warn Dirty cache lines will not be written back to 254 * memory. Make sure to call functionalWriteback() first if you 255 * want the to write them to memory. 256 */ 257 virtual void memInvalidate() = 0; 258 /** 259 * Determine if there are any dirty blocks in the cache. 260 * 261 * \return true if at least one block is dirty, false otherwise. 262 */ 263 virtual bool isDirty() const = 0; 264 265 /** 266 * Determine if an address is in the ranges covered by this 267 * cache. This is useful to filter snoops. 268 * 269 * @param addr Address to check against 270 * 271 * @return If the address in question is in range 272 */ 273 bool inRange(Addr addr) const; 274 275 /** Block size of this cache */ 276 const unsigned blkSize; 277 278 /** 279 * The latency of tag lookup of a cache. It occurs when there is 280 * an access to the cache. 281 */ 282 const Cycles lookupLatency; 283 284 /** 285 * This is the forward latency of the cache. It occurs when there 286 * is a cache miss and a request is forwarded downstream, in 287 * particular an outbound miss. 288 */ 289 const Cycles forwardLatency; 290 291 /** The latency to fill a cache block */ 292 const Cycles fillLatency; 293 294 /** 295 * The latency of sending reponse to its upper level cache/core on 296 * a linefill. The responseLatency parameter captures this 297 * latency. 298 */ 299 const Cycles responseLatency; 300 301 /** The number of targets for each MSHR. */ 302 const int numTarget; 303 304 /** Do we forward snoops from mem side port through to cpu side port? */ 305 const bool forwardSnoops; 306 307 /** Is this cache a toplevel cache (e.g. L1, I/O cache). If so we should 308 * never try to forward ownership and similar optimizations to the cpu 309 * side */ 310 const bool isTopLevel; 311 312 /** 313 * Bit vector of the blocking reasons for the access path. 314 * @sa #BlockedCause 315 */ 316 uint8_t blocked; 317 318 /** Increasing order number assigned to each incoming request. */ 319 uint64_t order; 320 321 /** Stores time the cache blocked for statistics. */ 322 Cycles blockedCycle; 323 324 /** Pointer to the MSHR that has no targets. */ 325 MSHR *noTargetMSHR; 326 327 /** The number of misses to trigger an exit event. */ 328 Counter missCount; 329 330 /** 331 * The address range to which the cache responds on the CPU side. 332 * Normally this is all possible memory addresses. */ 333 const AddrRangeList addrRanges; 334 335 public: 336 /** System we are currently operating in. */ 337 System *system; 338 339 // Statistics 340 /** 341 * @addtogroup CacheStatistics 342 * @{ 343 */ 344 345 /** Number of hits per thread for each type of command. @sa Packet::Command */ 346 Stats::Vector hits[MemCmd::NUM_MEM_CMDS]; 347 /** Number of hits for demand accesses. */ 348 Stats::Formula demandHits; 349 /** Number of hit for all accesses. */ 350 Stats::Formula overallHits; 351 352 /** Number of misses per thread for each type of command. @sa Packet::Command */ 353 Stats::Vector misses[MemCmd::NUM_MEM_CMDS]; 354 /** Number of misses for demand accesses. */ 355 Stats::Formula demandMisses; 356 /** Number of misses for all accesses. */ 357 Stats::Formula overallMisses; 358 359 /** 360 * Total number of cycles per thread/command spent waiting for a miss. 361 * Used to calculate the average miss latency. 362 */ 363 Stats::Vector missLatency[MemCmd::NUM_MEM_CMDS]; 364 /** Total number of cycles spent waiting for demand misses. */ 365 Stats::Formula demandMissLatency; 366 /** Total number of cycles spent waiting for all misses. */ 367 Stats::Formula overallMissLatency; 368 369 /** The number of accesses per command and thread. */ 370 Stats::Formula accesses[MemCmd::NUM_MEM_CMDS]; 371 /** The number of demand accesses. */ 372 Stats::Formula demandAccesses; 373 /** The number of overall accesses. */ 374 Stats::Formula overallAccesses; 375 376 /** The miss rate per command and thread. */ 377 Stats::Formula missRate[MemCmd::NUM_MEM_CMDS]; 378 /** The miss rate of all demand accesses. */ 379 Stats::Formula demandMissRate; 380 /** The miss rate for all accesses. */ 381 Stats::Formula overallMissRate; 382 383 /** The average miss latency per command and thread. */ 384 Stats::Formula avgMissLatency[MemCmd::NUM_MEM_CMDS]; 385 /** The average miss latency for demand misses. */ 386 Stats::Formula demandAvgMissLatency; 387 /** The average miss latency for all misses. */ 388 Stats::Formula overallAvgMissLatency; 389 390 /** The total number of cycles blocked for each blocked cause. */ 391 Stats::Vector blocked_cycles; 392 /** The number of times this cache blocked for each blocked cause. */ 393 Stats::Vector blocked_causes; 394 395 /** The average number of cycles blocked for each blocked cause. */ 396 Stats::Formula avg_blocked; 397 398 /** The number of fast writes (WH64) performed. */ 399 Stats::Scalar fastWrites; 400 401 /** The number of cache copies performed. */ 402 Stats::Scalar cacheCopies; 403 404 /** Number of blocks written back per thread. */ 405 Stats::Vector writebacks; 406 407 /** Number of misses that hit in the MSHRs per command and thread. */ 408 Stats::Vector mshr_hits[MemCmd::NUM_MEM_CMDS]; 409 /** Demand misses that hit in the MSHRs. */ 410 Stats::Formula demandMshrHits; 411 /** Total number of misses that hit in the MSHRs. */ 412 Stats::Formula overallMshrHits; 413 414 /** Number of misses that miss in the MSHRs, per command and thread. */ 415 Stats::Vector mshr_misses[MemCmd::NUM_MEM_CMDS]; 416 /** Demand misses that miss in the MSHRs. */ 417 Stats::Formula demandMshrMisses; 418 /** Total number of misses that miss in the MSHRs. */ 419 Stats::Formula overallMshrMisses; 420 421 /** Number of misses that miss in the MSHRs, per command and thread. */ 422 Stats::Vector mshr_uncacheable[MemCmd::NUM_MEM_CMDS]; 423 /** Total number of misses that miss in the MSHRs. */ 424 Stats::Formula overallMshrUncacheable; 425 426 /** Total cycle latency of each MSHR miss, per command and thread. */ 427 Stats::Vector mshr_miss_latency[MemCmd::NUM_MEM_CMDS]; 428 /** Total cycle latency of demand MSHR misses. */ 429 Stats::Formula demandMshrMissLatency; 430 /** Total cycle latency of overall MSHR misses. */ 431 Stats::Formula overallMshrMissLatency; 432 433 /** Total cycle latency of each MSHR miss, per command and thread. */ 434 Stats::Vector mshr_uncacheable_lat[MemCmd::NUM_MEM_CMDS]; 435 /** Total cycle latency of overall MSHR misses. */ 436 Stats::Formula overallMshrUncacheableLatency; 437 438#if 0 439 /** The total number of MSHR accesses per command and thread. */ 440 Stats::Formula mshrAccesses[MemCmd::NUM_MEM_CMDS]; 441 /** The total number of demand MSHR accesses. */ 442 Stats::Formula demandMshrAccesses; 443 /** The total number of MSHR accesses. */ 444 Stats::Formula overallMshrAccesses; 445#endif 446 447 /** The miss rate in the MSHRs pre command and thread. */ 448 Stats::Formula mshrMissRate[MemCmd::NUM_MEM_CMDS]; 449 /** The demand miss rate in the MSHRs. */ 450 Stats::Formula demandMshrMissRate; 451 /** The overall miss rate in the MSHRs. */ 452 Stats::Formula overallMshrMissRate; 453 454 /** The average latency of an MSHR miss, per command and thread. */ 455 Stats::Formula avgMshrMissLatency[MemCmd::NUM_MEM_CMDS]; 456 /** The average latency of a demand MSHR miss. */ 457 Stats::Formula demandAvgMshrMissLatency; 458 /** The average overall latency of an MSHR miss. */ 459 Stats::Formula overallAvgMshrMissLatency; 460 461 /** The average latency of an MSHR miss, per command and thread. */ 462 Stats::Formula avgMshrUncacheableLatency[MemCmd::NUM_MEM_CMDS]; 463 /** The average overall latency of an MSHR miss. */ 464 Stats::Formula overallAvgMshrUncacheableLatency; 465 466 /** The number of times a thread hit its MSHR cap. */ 467 Stats::Vector mshr_cap_events; 468 /** The number of times software prefetches caused the MSHR to block. */ 469 Stats::Vector soft_prefetch_mshr_full; 470 471 Stats::Scalar mshr_no_allocate_misses; 472 473 /** 474 * @} 475 */ 476 477 /** 478 * Register stats for this object. 479 */ 480 virtual void regStats(); 481 482 public: 483 typedef BaseCacheParams Params; 484 BaseCache(const Params *p); 485 ~BaseCache() {} 486 487 virtual void init(); 488 489 virtual BaseMasterPort &getMasterPort(const std::string &if_name, 490 PortID idx = InvalidPortID); 491 virtual BaseSlavePort &getSlavePort(const std::string &if_name, 492 PortID idx = InvalidPortID); 493 494 /** 495 * Query block size of a cache. 496 * @return The block size 497 */ 498 unsigned 499 getBlockSize() const 500 { 501 return blkSize; 502 } 503 504 505 Addr blockAlign(Addr addr) const { return (addr & ~(Addr(blkSize - 1))); } 506 507 508 const AddrRangeList &getAddrRanges() const { return addrRanges; } 509 510 MSHR *allocateMissBuffer(PacketPtr pkt, Tick time, bool requestBus) 511 { 512 return allocateBufferInternal(&mshrQueue, 513 blockAlign(pkt->getAddr()), blkSize, 514 pkt, time, requestBus); 515 } 516 517 MSHR *allocateWriteBuffer(PacketPtr pkt, Tick time, bool requestBus) 518 { 519 assert(pkt->isWrite() && !pkt->isRead()); 520 return allocateBufferInternal(&writeBuffer, 521 blockAlign(pkt->getAddr()), blkSize, 522 pkt, time, requestBus); 523 } 524 525 /** 526 * Returns true if the cache is blocked for accesses. 527 */ 528 bool isBlocked() const 529 { 530 return blocked != 0; 531 } 532 533 /** 534 * Marks the access path of the cache as blocked for the given cause. This 535 * also sets the blocked flag in the slave interface. 536 * @param cause The reason for the cache blocking. 537 */ 538 void setBlocked(BlockedCause cause) 539 { 540 uint8_t flag = 1 << cause; 541 if (blocked == 0) { 542 blocked_causes[cause]++; 543 blockedCycle = curCycle(); 544 cpuSidePort->setBlocked(); 545 } 546 blocked |= flag; 547 DPRINTF(Cache,"Blocking for cause %d, mask=%d\n", cause, blocked); 548 } 549 550 /** 551 * Marks the cache as unblocked for the given cause. This also clears the 552 * blocked flags in the appropriate interfaces. 553 * @param cause The newly unblocked cause. 554 * @warning Calling this function can cause a blocked request on the bus to 555 * access the cache. The cache must be in a state to handle that request. 556 */ 557 void clearBlocked(BlockedCause cause) 558 { 559 uint8_t flag = 1 << cause; 560 blocked &= ~flag; 561 DPRINTF(Cache,"Unblocking for cause %d, mask=%d\n", cause, blocked); 562 if (blocked == 0) { 563 blocked_cycles[cause] += curCycle() - blockedCycle; 564 cpuSidePort->clearBlocked(); 565 } 566 } 567 568 /** 569 * Request the master bus for the given cause and time. 570 * @param cause The reason for the request. 571 * @param time The time to make the request. 572 */ 573 void requestMemSideBus(RequestCause cause, Tick time) 574 { 575 memSidePort->requestBus(cause, time); 576 } 577 578 /** 579 * Clear the master bus request for the given cause. 580 * @param cause The request reason to clear. 581 */ 582 void deassertMemSideBusRequest(RequestCause cause) 583 { 584 // Obsolete... we no longer signal bus requests explicitly so 585 // we can't deassert them. Leaving this in as a no-op since 586 // the prefetcher calls it to indicate that it no longer wants 587 // to request a prefetch, and someday that might be 588 // interesting again. 589 } 590 591 virtual unsigned int drain(DrainManager *dm); 592 593 virtual bool inCache(Addr addr, bool is_secure) const = 0; 594 595 virtual bool inMissQueue(Addr addr, bool is_secure) const = 0; 596 597 void incMissCount(PacketPtr pkt) 598 { 599 assert(pkt->req->masterId() < system->maxMasters()); 600 misses[pkt->cmdToIndex()][pkt->req->masterId()]++; 601 pkt->req->incAccessDepth(); 602 if (missCount) { 603 --missCount; 604 if (missCount == 0) 605 exitSimLoop("A cache reached the maximum miss count"); 606 } 607 } 608 void incHitCount(PacketPtr pkt) 609 { 610 assert(pkt->req->masterId() < system->maxMasters()); 611 hits[pkt->cmdToIndex()][pkt->req->masterId()]++; 612 613 } 614 615}; 616 617#endif //__BASE_CACHE_HH__ 618