base.hh revision 10662
1/*
2 * Copyright (c) 2012-2013 ARM Limited
3 * All rights reserved.
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder.  You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2003-2005 The Regents of The University of Michigan
15 * All rights reserved.
16 *
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions are
19 * met: redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer;
21 * redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution;
24 * neither the name of the copyright holders nor the names of its
25 * contributors may be used to endorse or promote products derived from
26 * this software without specific prior written permission.
27 *
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 *
40 * Authors: Erik Hallnor
41 *          Steve Reinhardt
42 *          Ron Dreslinski
43 */
44
45/**
46 * @file
47 * Declares a basic cache interface BaseCache.
48 */
49
50#ifndef __BASE_CACHE_HH__
51#define __BASE_CACHE_HH__
52
53#include <algorithm>
54#include <list>
55#include <string>
56#include <vector>
57
58#include "base/misc.hh"
59#include "base/statistics.hh"
60#include "base/trace.hh"
61#include "base/types.hh"
62#include "debug/Cache.hh"
63#include "debug/CachePort.hh"
64#include "mem/cache/mshr_queue.hh"
65#include "mem/mem_object.hh"
66#include "mem/packet.hh"
67#include "mem/qport.hh"
68#include "mem/request.hh"
69#include "params/BaseCache.hh"
70#include "sim/eventq.hh"
71#include "sim/full_system.hh"
72#include "sim/sim_exit.hh"
73#include "sim/system.hh"
74
75class MSHR;
76/**
77 * A basic cache interface. Implements some common functions for speed.
78 */
79class BaseCache : public MemObject
80{
81    /**
82     * Indexes to enumerate the MSHR queues.
83     */
84    enum MSHRQueueIndex {
85        MSHRQueue_MSHRs,
86        MSHRQueue_WriteBuffer
87    };
88
89  public:
90    /**
91     * Reasons for caches to be blocked.
92     */
93    enum BlockedCause {
94        Blocked_NoMSHRs = MSHRQueue_MSHRs,
95        Blocked_NoWBBuffers = MSHRQueue_WriteBuffer,
96        Blocked_NoTargets,
97        NUM_BLOCKED_CAUSES
98    };
99
100    /**
101     * Reasons for cache to request a bus.
102     */
103    enum RequestCause {
104        Request_MSHR = MSHRQueue_MSHRs,
105        Request_WB = MSHRQueue_WriteBuffer,
106        Request_PF,
107        NUM_REQUEST_CAUSES
108    };
109
110  protected:
111
112    /**
113     * A cache master port is used for the memory-side port of the
114     * cache, and in addition to the basic timing port that only sends
115     * response packets through a transmit list, it also offers the
116     * ability to schedule and send request packets (requests &
117     * writebacks). The send event is scheduled through requestBus,
118     * and the sendDeferredPacket of the timing port is modified to
119     * consider both the transmit list and the requests from the MSHR.
120     */
121    class CacheMasterPort : public QueuedMasterPort
122    {
123
124      public:
125
126        /**
127         * Schedule a send of a request packet (from the MSHR). Note
128         * that we could already have a retry or a transmit list of
129         * responses outstanding.
130         */
131        void requestBus(RequestCause cause, Tick time)
132        {
133            DPRINTF(CachePort, "Asserting bus request for cause %d\n", cause);
134            queue.schedSendEvent(time);
135        }
136
137      protected:
138
139        CacheMasterPort(const std::string &_name, BaseCache *_cache,
140                        MasterPacketQueue &_queue) :
141            QueuedMasterPort(_name, _cache, _queue)
142        { }
143
144        /**
145         * Memory-side port always snoops.
146         *
147         * @return always true
148         */
149        virtual bool isSnooping() const { return true; }
150    };
151
152    /**
153     * A cache slave port is used for the CPU-side port of the cache,
154     * and it is basically a simple timing port that uses a transmit
155     * list for responses to the CPU (or connected master). In
156     * addition, it has the functionality to block the port for
157     * incoming requests. If blocked, the port will issue a retry once
158     * unblocked.
159     */
160    class CacheSlavePort : public QueuedSlavePort
161    {
162
163      public:
164
165        /** Do not accept any new requests. */
166        void setBlocked();
167
168        /** Return to normal operation and accept new requests. */
169        void clearBlocked();
170
171        bool isBlocked() const { return blocked; }
172
173      protected:
174
175        CacheSlavePort(const std::string &_name, BaseCache *_cache,
176                       const std::string &_label);
177
178        /** A normal packet queue used to store responses. */
179        SlavePacketQueue queue;
180
181        bool blocked;
182
183        bool mustSendRetry;
184
185      private:
186
187        void processSendRetry();
188
189        EventWrapper<CacheSlavePort,
190                     &CacheSlavePort::processSendRetry> sendRetryEvent;
191
192    };
193
194    CacheSlavePort *cpuSidePort;
195    CacheMasterPort *memSidePort;
196
197  protected:
198
199    /** Miss status registers */
200    MSHRQueue mshrQueue;
201
202    /** Write/writeback buffer */
203    MSHRQueue writeBuffer;
204
205    MSHR *allocateBufferInternal(MSHRQueue *mq, Addr addr, int size,
206                                 PacketPtr pkt, Tick time, bool requestBus)
207    {
208        MSHR *mshr = mq->allocate(addr, size, pkt, time, order++);
209
210        if (mq->isFull()) {
211            setBlocked((BlockedCause)mq->index);
212        }
213
214        if (requestBus) {
215            requestMemSideBus((RequestCause)mq->index, time);
216        }
217
218        return mshr;
219    }
220
221    void markInServiceInternal(MSHR *mshr, PacketPtr pkt)
222    {
223        MSHRQueue *mq = mshr->queue;
224        bool wasFull = mq->isFull();
225        mq->markInService(mshr, pkt);
226        if (wasFull && !mq->isFull()) {
227            clearBlocked((BlockedCause)mq->index);
228        }
229    }
230
231    /**
232     * Write back dirty blocks in the cache using functional accesses.
233     */
234    virtual void memWriteback() = 0;
235    /**
236     * Invalidates all blocks in the cache.
237     *
238     * @warn Dirty cache lines will not be written back to
239     * memory. Make sure to call functionalWriteback() first if you
240     * want the to write them to memory.
241     */
242    virtual void memInvalidate() = 0;
243    /**
244     * Determine if there are any dirty blocks in the cache.
245     *
246     * \return true if at least one block is dirty, false otherwise.
247     */
248    virtual bool isDirty() const = 0;
249
250    /** Block size of this cache */
251    const unsigned blkSize;
252
253    /**
254     * The latency of a hit in this device.
255     */
256    const Cycles hitLatency;
257
258    /**
259     * The latency of sending reponse to its upper level cache/core on a
260     * linefill. In most contemporary processors, the return path on a cache
261     * miss is much quicker that the hit latency. The responseLatency parameter
262     * tries to capture this latency.
263     */
264    const Cycles responseLatency;
265
266    /** The number of targets for each MSHR. */
267    const int numTarget;
268
269    /** Do we forward snoops from mem side port through to cpu side port? */
270    const bool forwardSnoops;
271
272    /** Is this cache a toplevel cache (e.g. L1, I/O cache). If so we should
273     * never try to forward ownership and similar optimizations to the cpu
274     * side */
275    const bool isTopLevel;
276
277    /**
278     * Bit vector of the blocking reasons for the access path.
279     * @sa #BlockedCause
280     */
281    uint8_t blocked;
282
283    /** Increasing order number assigned to each incoming request. */
284    uint64_t order;
285
286    /** Stores time the cache blocked for statistics. */
287    Cycles blockedCycle;
288
289    /** Pointer to the MSHR that has no targets. */
290    MSHR *noTargetMSHR;
291
292    /** The number of misses to trigger an exit event. */
293    Counter missCount;
294
295    /**
296     * The address range to which the cache responds on the CPU side.
297     * Normally this is all possible memory addresses. */
298    const AddrRangeList addrRanges;
299
300  public:
301    /** System we are currently operating in. */
302    System *system;
303
304    // Statistics
305    /**
306     * @addtogroup CacheStatistics
307     * @{
308     */
309
310    /** Number of hits per thread for each type of command. @sa Packet::Command */
311    Stats::Vector hits[MemCmd::NUM_MEM_CMDS];
312    /** Number of hits for demand accesses. */
313    Stats::Formula demandHits;
314    /** Number of hit for all accesses. */
315    Stats::Formula overallHits;
316
317    /** Number of misses per thread for each type of command. @sa Packet::Command */
318    Stats::Vector misses[MemCmd::NUM_MEM_CMDS];
319    /** Number of misses for demand accesses. */
320    Stats::Formula demandMisses;
321    /** Number of misses for all accesses. */
322    Stats::Formula overallMisses;
323
324    /**
325     * Total number of cycles per thread/command spent waiting for a miss.
326     * Used to calculate the average miss latency.
327     */
328    Stats::Vector missLatency[MemCmd::NUM_MEM_CMDS];
329    /** Total number of cycles spent waiting for demand misses. */
330    Stats::Formula demandMissLatency;
331    /** Total number of cycles spent waiting for all misses. */
332    Stats::Formula overallMissLatency;
333
334    /** The number of accesses per command and thread. */
335    Stats::Formula accesses[MemCmd::NUM_MEM_CMDS];
336    /** The number of demand accesses. */
337    Stats::Formula demandAccesses;
338    /** The number of overall accesses. */
339    Stats::Formula overallAccesses;
340
341    /** The miss rate per command and thread. */
342    Stats::Formula missRate[MemCmd::NUM_MEM_CMDS];
343    /** The miss rate of all demand accesses. */
344    Stats::Formula demandMissRate;
345    /** The miss rate for all accesses. */
346    Stats::Formula overallMissRate;
347
348    /** The average miss latency per command and thread. */
349    Stats::Formula avgMissLatency[MemCmd::NUM_MEM_CMDS];
350    /** The average miss latency for demand misses. */
351    Stats::Formula demandAvgMissLatency;
352    /** The average miss latency for all misses. */
353    Stats::Formula overallAvgMissLatency;
354
355    /** The total number of cycles blocked for each blocked cause. */
356    Stats::Vector blocked_cycles;
357    /** The number of times this cache blocked for each blocked cause. */
358    Stats::Vector blocked_causes;
359
360    /** The average number of cycles blocked for each blocked cause. */
361    Stats::Formula avg_blocked;
362
363    /** The number of fast writes (WH64) performed. */
364    Stats::Scalar fastWrites;
365
366    /** The number of cache copies performed. */
367    Stats::Scalar cacheCopies;
368
369    /** Number of blocks written back per thread. */
370    Stats::Vector writebacks;
371
372    /** Number of misses that hit in the MSHRs per command and thread. */
373    Stats::Vector mshr_hits[MemCmd::NUM_MEM_CMDS];
374    /** Demand misses that hit in the MSHRs. */
375    Stats::Formula demandMshrHits;
376    /** Total number of misses that hit in the MSHRs. */
377    Stats::Formula overallMshrHits;
378
379    /** Number of misses that miss in the MSHRs, per command and thread. */
380    Stats::Vector mshr_misses[MemCmd::NUM_MEM_CMDS];
381    /** Demand misses that miss in the MSHRs. */
382    Stats::Formula demandMshrMisses;
383    /** Total number of misses that miss in the MSHRs. */
384    Stats::Formula overallMshrMisses;
385
386    /** Number of misses that miss in the MSHRs, per command and thread. */
387    Stats::Vector mshr_uncacheable[MemCmd::NUM_MEM_CMDS];
388    /** Total number of misses that miss in the MSHRs. */
389    Stats::Formula overallMshrUncacheable;
390
391    /** Total cycle latency of each MSHR miss, per command and thread. */
392    Stats::Vector mshr_miss_latency[MemCmd::NUM_MEM_CMDS];
393    /** Total cycle latency of demand MSHR misses. */
394    Stats::Formula demandMshrMissLatency;
395    /** Total cycle latency of overall MSHR misses. */
396    Stats::Formula overallMshrMissLatency;
397
398    /** Total cycle latency of each MSHR miss, per command and thread. */
399    Stats::Vector mshr_uncacheable_lat[MemCmd::NUM_MEM_CMDS];
400    /** Total cycle latency of overall MSHR misses. */
401    Stats::Formula overallMshrUncacheableLatency;
402
403#if 0
404    /** The total number of MSHR accesses per command and thread. */
405    Stats::Formula mshrAccesses[MemCmd::NUM_MEM_CMDS];
406    /** The total number of demand MSHR accesses. */
407    Stats::Formula demandMshrAccesses;
408    /** The total number of MSHR accesses. */
409    Stats::Formula overallMshrAccesses;
410#endif
411
412    /** The miss rate in the MSHRs pre command and thread. */
413    Stats::Formula mshrMissRate[MemCmd::NUM_MEM_CMDS];
414    /** The demand miss rate in the MSHRs. */
415    Stats::Formula demandMshrMissRate;
416    /** The overall miss rate in the MSHRs. */
417    Stats::Formula overallMshrMissRate;
418
419    /** The average latency of an MSHR miss, per command and thread. */
420    Stats::Formula avgMshrMissLatency[MemCmd::NUM_MEM_CMDS];
421    /** The average latency of a demand MSHR miss. */
422    Stats::Formula demandAvgMshrMissLatency;
423    /** The average overall latency of an MSHR miss. */
424    Stats::Formula overallAvgMshrMissLatency;
425
426    /** The average latency of an MSHR miss, per command and thread. */
427    Stats::Formula avgMshrUncacheableLatency[MemCmd::NUM_MEM_CMDS];
428    /** The average overall latency of an MSHR miss. */
429    Stats::Formula overallAvgMshrUncacheableLatency;
430
431    /** The number of times a thread hit its MSHR cap. */
432    Stats::Vector mshr_cap_events;
433    /** The number of times software prefetches caused the MSHR to block. */
434    Stats::Vector soft_prefetch_mshr_full;
435
436    Stats::Scalar mshr_no_allocate_misses;
437
438    /**
439     * @}
440     */
441
442    /**
443     * Register stats for this object.
444     */
445    virtual void regStats();
446
447  public:
448    typedef BaseCacheParams Params;
449    BaseCache(const Params *p);
450    ~BaseCache() {}
451
452    virtual void init();
453
454    virtual BaseMasterPort &getMasterPort(const std::string &if_name,
455                                          PortID idx = InvalidPortID);
456    virtual BaseSlavePort &getSlavePort(const std::string &if_name,
457                                        PortID idx = InvalidPortID);
458
459    /**
460     * Query block size of a cache.
461     * @return  The block size
462     */
463    unsigned
464    getBlockSize() const
465    {
466        return blkSize;
467    }
468
469
470    Addr blockAlign(Addr addr) const { return (addr & ~(Addr(blkSize - 1))); }
471
472
473    const AddrRangeList &getAddrRanges() const { return addrRanges; }
474
475    MSHR *allocateMissBuffer(PacketPtr pkt, Tick time, bool requestBus)
476    {
477        assert(!pkt->req->isUncacheable());
478        return allocateBufferInternal(&mshrQueue,
479                                      blockAlign(pkt->getAddr()), blkSize,
480                                      pkt, time, requestBus);
481    }
482
483    MSHR *allocateWriteBuffer(PacketPtr pkt, Tick time, bool requestBus)
484    {
485        assert(pkt->isWrite() && !pkt->isRead());
486        return allocateBufferInternal(&writeBuffer,
487                                      pkt->getAddr(), pkt->getSize(),
488                                      pkt, time, requestBus);
489    }
490
491    MSHR *allocateUncachedReadBuffer(PacketPtr pkt, Tick time, bool requestBus)
492    {
493        assert(pkt->req->isUncacheable());
494        assert(pkt->isRead());
495        return allocateBufferInternal(&mshrQueue,
496                                      pkt->getAddr(), pkt->getSize(),
497                                      pkt, time, requestBus);
498    }
499
500    /**
501     * Returns true if the cache is blocked for accesses.
502     */
503    bool isBlocked() const
504    {
505        return blocked != 0;
506    }
507
508    /**
509     * Marks the access path of the cache as blocked for the given cause. This
510     * also sets the blocked flag in the slave interface.
511     * @param cause The reason for the cache blocking.
512     */
513    void setBlocked(BlockedCause cause)
514    {
515        uint8_t flag = 1 << cause;
516        if (blocked == 0) {
517            blocked_causes[cause]++;
518            blockedCycle = curCycle();
519            cpuSidePort->setBlocked();
520        }
521        blocked |= flag;
522        DPRINTF(Cache,"Blocking for cause %d, mask=%d\n", cause, blocked);
523    }
524
525    /**
526     * Marks the cache as unblocked for the given cause. This also clears the
527     * blocked flags in the appropriate interfaces.
528     * @param cause The newly unblocked cause.
529     * @warning Calling this function can cause a blocked request on the bus to
530     * access the cache. The cache must be in a state to handle that request.
531     */
532    void clearBlocked(BlockedCause cause)
533    {
534        uint8_t flag = 1 << cause;
535        blocked &= ~flag;
536        DPRINTF(Cache,"Unblocking for cause %d, mask=%d\n", cause, blocked);
537        if (blocked == 0) {
538            blocked_cycles[cause] += curCycle() - blockedCycle;
539            cpuSidePort->clearBlocked();
540        }
541    }
542
543    /**
544     * Request the master bus for the given cause and time.
545     * @param cause The reason for the request.
546     * @param time The time to make the request.
547     */
548    void requestMemSideBus(RequestCause cause, Tick time)
549    {
550        memSidePort->requestBus(cause, time);
551    }
552
553    /**
554     * Clear the master bus request for the given cause.
555     * @param cause The request reason to clear.
556     */
557    void deassertMemSideBusRequest(RequestCause cause)
558    {
559        // Obsolete... we no longer signal bus requests explicitly so
560        // we can't deassert them.  Leaving this in as a no-op since
561        // the prefetcher calls it to indicate that it no longer wants
562        // to request a prefetch, and someday that might be
563        // interesting again.
564    }
565
566    virtual unsigned int drain(DrainManager *dm);
567
568    virtual bool inCache(Addr addr, bool is_secure) const = 0;
569
570    virtual bool inMissQueue(Addr addr, bool is_secure) const = 0;
571
572    void incMissCount(PacketPtr pkt)
573    {
574        assert(pkt->req->masterId() < system->maxMasters());
575        misses[pkt->cmdToIndex()][pkt->req->masterId()]++;
576        pkt->req->incAccessDepth();
577        if (missCount) {
578            --missCount;
579            if (missCount == 0)
580                exitSimLoop("A cache reached the maximum miss count");
581        }
582    }
583    void incHitCount(PacketPtr pkt)
584    {
585        assert(pkt->req->masterId() < system->maxMasters());
586        hits[pkt->cmdToIndex()][pkt->req->masterId()]++;
587
588    }
589
590};
591
592#endif //__BASE_CACHE_HH__
593