base.cc revision 13862
1/*
2 * Copyright (c) 2012-2013, 2018 ARM Limited
3 * All rights reserved.
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder.  You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2003-2005 The Regents of The University of Michigan
15 * All rights reserved.
16 *
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions are
19 * met: redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer;
21 * redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution;
24 * neither the name of the copyright holders nor the names of its
25 * contributors may be used to endorse or promote products derived from
26 * this software without specific prior written permission.
27 *
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 *
40 * Authors: Erik Hallnor
41 *          Nikos Nikoleris
42 */
43
44/**
45 * @file
46 * Definition of BaseCache functions.
47 */
48
49#include "mem/cache/base.hh"
50
51#include "base/compiler.hh"
52#include "base/logging.hh"
53#include "debug/Cache.hh"
54#include "debug/CachePort.hh"
55#include "debug/CacheRepl.hh"
56#include "debug/CacheVerbose.hh"
57#include "mem/cache/mshr.hh"
58#include "mem/cache/prefetch/base.hh"
59#include "mem/cache/queue_entry.hh"
60#include "params/BaseCache.hh"
61#include "params/WriteAllocator.hh"
62#include "sim/core.hh"
63
64class BaseMasterPort;
65class BaseSlavePort;
66
67using namespace std;
68
69BaseCache::CacheSlavePort::CacheSlavePort(const std::string &_name,
70                                          BaseCache *_cache,
71                                          const std::string &_label)
72    : QueuedSlavePort(_name, _cache, queue),
73      queue(*_cache, *this, true, _label),
74      blocked(false), mustSendRetry(false),
75      sendRetryEvent([this]{ processSendRetry(); }, _name)
76{
77}
78
79BaseCache::BaseCache(const BaseCacheParams *p, unsigned blk_size)
80    : MemObject(p),
81      cpuSidePort (p->name + ".cpu_side", this, "CpuSidePort"),
82      memSidePort(p->name + ".mem_side", this, "MemSidePort"),
83      mshrQueue("MSHRs", p->mshrs, 0, p->demand_mshr_reserve), // see below
84      writeBuffer("write buffer", p->write_buffers, p->mshrs), // see below
85      tags(p->tags),
86      prefetcher(p->prefetcher),
87      writeAllocator(p->write_allocator),
88      writebackClean(p->writeback_clean),
89      tempBlockWriteback(nullptr),
90      writebackTempBlockAtomicEvent([this]{ writebackTempBlockAtomic(); },
91                                    name(), false,
92                                    EventBase::Delayed_Writeback_Pri),
93      blkSize(blk_size),
94      lookupLatency(p->tag_latency),
95      dataLatency(p->data_latency),
96      forwardLatency(p->tag_latency),
97      fillLatency(p->data_latency),
98      responseLatency(p->response_latency),
99      sequentialAccess(p->sequential_access),
100      numTarget(p->tgts_per_mshr),
101      forwardSnoops(true),
102      clusivity(p->clusivity),
103      isReadOnly(p->is_read_only),
104      blocked(0),
105      order(0),
106      noTargetMSHR(nullptr),
107      missCount(p->max_miss_count),
108      addrRanges(p->addr_ranges.begin(), p->addr_ranges.end()),
109      system(p->system)
110{
111    // the MSHR queue has no reserve entries as we check the MSHR
112    // queue on every single allocation, whereas the write queue has
113    // as many reserve entries as we have MSHRs, since every MSHR may
114    // eventually require a writeback, and we do not check the write
115    // buffer before committing to an MSHR
116
117    // forward snoops is overridden in init() once we can query
118    // whether the connected master is actually snooping or not
119
120    tempBlock = new TempCacheBlk(blkSize);
121
122    tags->tagsInit();
123    if (prefetcher)
124        prefetcher->setCache(this);
125}
126
127BaseCache::~BaseCache()
128{
129    delete tempBlock;
130}
131
132void
133BaseCache::CacheSlavePort::setBlocked()
134{
135    assert(!blocked);
136    DPRINTF(CachePort, "Port is blocking new requests\n");
137    blocked = true;
138    // if we already scheduled a retry in this cycle, but it has not yet
139    // happened, cancel it
140    if (sendRetryEvent.scheduled()) {
141        owner.deschedule(sendRetryEvent);
142        DPRINTF(CachePort, "Port descheduled retry\n");
143        mustSendRetry = true;
144    }
145}
146
147void
148BaseCache::CacheSlavePort::clearBlocked()
149{
150    assert(blocked);
151    DPRINTF(CachePort, "Port is accepting new requests\n");
152    blocked = false;
153    if (mustSendRetry) {
154        // @TODO: need to find a better time (next cycle?)
155        owner.schedule(sendRetryEvent, curTick() + 1);
156    }
157}
158
159void
160BaseCache::CacheSlavePort::processSendRetry()
161{
162    DPRINTF(CachePort, "Port is sending retry\n");
163
164    // reset the flag and call retry
165    mustSendRetry = false;
166    sendRetryReq();
167}
168
169Addr
170BaseCache::regenerateBlkAddr(CacheBlk* blk)
171{
172    if (blk != tempBlock) {
173        return tags->regenerateBlkAddr(blk);
174    } else {
175        return tempBlock->getAddr();
176    }
177}
178
179void
180BaseCache::init()
181{
182    if (!cpuSidePort.isConnected() || !memSidePort.isConnected())
183        fatal("Cache ports on %s are not connected\n", name());
184    cpuSidePort.sendRangeChange();
185    forwardSnoops = cpuSidePort.isSnooping();
186}
187
188Port &
189BaseCache::getPort(const std::string &if_name, PortID idx)
190{
191    if (if_name == "mem_side") {
192        return memSidePort;
193    } else if (if_name == "cpu_side") {
194        return cpuSidePort;
195    }  else {
196        return MemObject::getPort(if_name, idx);
197    }
198}
199
200bool
201BaseCache::inRange(Addr addr) const
202{
203    for (const auto& r : addrRanges) {
204        if (r.contains(addr)) {
205            return true;
206       }
207    }
208    return false;
209}
210
211void
212BaseCache::handleTimingReqHit(PacketPtr pkt, CacheBlk *blk, Tick request_time)
213{
214    if (pkt->needsResponse()) {
215        // These delays should have been consumed by now
216        assert(pkt->headerDelay == 0);
217        assert(pkt->payloadDelay == 0);
218
219        pkt->makeTimingResponse();
220
221        // In this case we are considering request_time that takes
222        // into account the delay of the xbar, if any, and just
223        // lat, neglecting responseLatency, modelling hit latency
224        // just as the value of lat overriden by access(), which calls
225        // the calculateAccessLatency() function.
226        cpuSidePort.schedTimingResp(pkt, request_time);
227    } else {
228        DPRINTF(Cache, "%s satisfied %s, no response needed\n", __func__,
229                pkt->print());
230
231        // queue the packet for deletion, as the sending cache is
232        // still relying on it; if the block is found in access(),
233        // CleanEvict and Writeback messages will be deleted
234        // here as well
235        pendingDelete.reset(pkt);
236    }
237}
238
239void
240BaseCache::handleTimingReqMiss(PacketPtr pkt, MSHR *mshr, CacheBlk *blk,
241                               Tick forward_time, Tick request_time)
242{
243    if (writeAllocator &&
244        pkt && pkt->isWrite() && !pkt->req->isUncacheable()) {
245        writeAllocator->updateMode(pkt->getAddr(), pkt->getSize(),
246                                   pkt->getBlockAddr(blkSize));
247    }
248
249    if (mshr) {
250        /// MSHR hit
251        /// @note writebacks will be checked in getNextMSHR()
252        /// for any conflicting requests to the same block
253
254        //@todo remove hw_pf here
255
256        // Coalesce unless it was a software prefetch (see above).
257        if (pkt) {
258            assert(!pkt->isWriteback());
259            // CleanEvicts corresponding to blocks which have
260            // outstanding requests in MSHRs are simply sunk here
261            if (pkt->cmd == MemCmd::CleanEvict) {
262                pendingDelete.reset(pkt);
263            } else if (pkt->cmd == MemCmd::WriteClean) {
264                // A WriteClean should never coalesce with any
265                // outstanding cache maintenance requests.
266
267                // We use forward_time here because there is an
268                // uncached memory write, forwarded to WriteBuffer.
269                allocateWriteBuffer(pkt, forward_time);
270            } else {
271                DPRINTF(Cache, "%s coalescing MSHR for %s\n", __func__,
272                        pkt->print());
273
274                assert(pkt->req->masterId() < system->maxMasters());
275                mshr_hits[pkt->cmdToIndex()][pkt->req->masterId()]++;
276
277                // We use forward_time here because it is the same
278                // considering new targets. We have multiple
279                // requests for the same address here. It
280                // specifies the latency to allocate an internal
281                // buffer and to schedule an event to the queued
282                // port and also takes into account the additional
283                // delay of the xbar.
284                mshr->allocateTarget(pkt, forward_time, order++,
285                                     allocOnFill(pkt->cmd));
286                if (mshr->getNumTargets() == numTarget) {
287                    noTargetMSHR = mshr;
288                    setBlocked(Blocked_NoTargets);
289                    // need to be careful with this... if this mshr isn't
290                    // ready yet (i.e. time > curTick()), we don't want to
291                    // move it ahead of mshrs that are ready
292                    // mshrQueue.moveToFront(mshr);
293                }
294            }
295        }
296    } else {
297        // no MSHR
298        assert(pkt->req->masterId() < system->maxMasters());
299        mshr_misses[pkt->cmdToIndex()][pkt->req->masterId()]++;
300
301        if (pkt->isEviction() || pkt->cmd == MemCmd::WriteClean) {
302            // We use forward_time here because there is an
303            // writeback or writeclean, forwarded to WriteBuffer.
304            allocateWriteBuffer(pkt, forward_time);
305        } else {
306            if (blk && blk->isValid()) {
307                // If we have a write miss to a valid block, we
308                // need to mark the block non-readable.  Otherwise
309                // if we allow reads while there's an outstanding
310                // write miss, the read could return stale data
311                // out of the cache block... a more aggressive
312                // system could detect the overlap (if any) and
313                // forward data out of the MSHRs, but we don't do
314                // that yet.  Note that we do need to leave the
315                // block valid so that it stays in the cache, in
316                // case we get an upgrade response (and hence no
317                // new data) when the write miss completes.
318                // As long as CPUs do proper store/load forwarding
319                // internally, and have a sufficiently weak memory
320                // model, this is probably unnecessary, but at some
321                // point it must have seemed like we needed it...
322                assert((pkt->needsWritable() && !blk->isWritable()) ||
323                       pkt->req->isCacheMaintenance());
324                blk->status &= ~BlkReadable;
325            }
326            // Here we are using forward_time, modelling the latency of
327            // a miss (outbound) just as forwardLatency, neglecting the
328            // lookupLatency component.
329            allocateMissBuffer(pkt, forward_time);
330        }
331    }
332}
333
334void
335BaseCache::recvTimingReq(PacketPtr pkt)
336{
337    // anything that is merely forwarded pays for the forward latency and
338    // the delay provided by the crossbar
339    Tick forward_time = clockEdge(forwardLatency) + pkt->headerDelay;
340
341    Cycles lat;
342    CacheBlk *blk = nullptr;
343    bool satisfied = false;
344    {
345        PacketList writebacks;
346        // Note that lat is passed by reference here. The function
347        // access() will set the lat value.
348        satisfied = access(pkt, blk, lat, writebacks);
349
350        // After the evicted blocks are selected, they must be forwarded
351        // to the write buffer to ensure they logically precede anything
352        // happening below
353        doWritebacks(writebacks, clockEdge(lat + forwardLatency));
354    }
355
356    // Here we charge the headerDelay that takes into account the latencies
357    // of the bus, if the packet comes from it.
358    // The latency charged is just the value set by the access() function.
359    // In case of a hit we are neglecting response latency.
360    // In case of a miss we are neglecting forward latency.
361    Tick request_time = clockEdge(lat);
362    // Here we reset the timing of the packet.
363    pkt->headerDelay = pkt->payloadDelay = 0;
364
365    if (satisfied) {
366        // notify before anything else as later handleTimingReqHit might turn
367        // the packet in a response
368        ppHit->notify(pkt);
369
370        if (prefetcher && blk && blk->wasPrefetched()) {
371            blk->status &= ~BlkHWPrefetched;
372        }
373
374        handleTimingReqHit(pkt, blk, request_time);
375    } else {
376        handleTimingReqMiss(pkt, blk, forward_time, request_time);
377
378        ppMiss->notify(pkt);
379    }
380
381    if (prefetcher) {
382        // track time of availability of next prefetch, if any
383        Tick next_pf_time = prefetcher->nextPrefetchReadyTime();
384        if (next_pf_time != MaxTick) {
385            schedMemSideSendEvent(next_pf_time);
386        }
387    }
388}
389
390void
391BaseCache::handleUncacheableWriteResp(PacketPtr pkt)
392{
393    Tick completion_time = clockEdge(responseLatency) +
394        pkt->headerDelay + pkt->payloadDelay;
395
396    // Reset the bus additional time as it is now accounted for
397    pkt->headerDelay = pkt->payloadDelay = 0;
398
399    cpuSidePort.schedTimingResp(pkt, completion_time);
400}
401
402void
403BaseCache::recvTimingResp(PacketPtr pkt)
404{
405    assert(pkt->isResponse());
406
407    // all header delay should be paid for by the crossbar, unless
408    // this is a prefetch response from above
409    panic_if(pkt->headerDelay != 0 && pkt->cmd != MemCmd::HardPFResp,
410             "%s saw a non-zero packet delay\n", name());
411
412    const bool is_error = pkt->isError();
413
414    if (is_error) {
415        DPRINTF(Cache, "%s: Cache received %s with error\n", __func__,
416                pkt->print());
417    }
418
419    DPRINTF(Cache, "%s: Handling response %s\n", __func__,
420            pkt->print());
421
422    // if this is a write, we should be looking at an uncacheable
423    // write
424    if (pkt->isWrite()) {
425        assert(pkt->req->isUncacheable());
426        handleUncacheableWriteResp(pkt);
427        return;
428    }
429
430    // we have dealt with any (uncacheable) writes above, from here on
431    // we know we are dealing with an MSHR due to a miss or a prefetch
432    MSHR *mshr = dynamic_cast<MSHR*>(pkt->popSenderState());
433    assert(mshr);
434
435    if (mshr == noTargetMSHR) {
436        // we always clear at least one target
437        clearBlocked(Blocked_NoTargets);
438        noTargetMSHR = nullptr;
439    }
440
441    // Initial target is used just for stats
442    QueueEntry::Target *initial_tgt = mshr->getTarget();
443    int stats_cmd_idx = initial_tgt->pkt->cmdToIndex();
444    Tick miss_latency = curTick() - initial_tgt->recvTime;
445
446    if (pkt->req->isUncacheable()) {
447        assert(pkt->req->masterId() < system->maxMasters());
448        mshr_uncacheable_lat[stats_cmd_idx][pkt->req->masterId()] +=
449            miss_latency;
450    } else {
451        assert(pkt->req->masterId() < system->maxMasters());
452        mshr_miss_latency[stats_cmd_idx][pkt->req->masterId()] +=
453            miss_latency;
454    }
455
456    PacketList writebacks;
457
458    bool is_fill = !mshr->isForward &&
459        (pkt->isRead() || pkt->cmd == MemCmd::UpgradeResp ||
460         mshr->wasWholeLineWrite);
461
462    // make sure that if the mshr was due to a whole line write then
463    // the response is an invalidation
464    assert(!mshr->wasWholeLineWrite || pkt->isInvalidate());
465
466    CacheBlk *blk = tags->findBlock(pkt->getAddr(), pkt->isSecure());
467
468    if (is_fill && !is_error) {
469        DPRINTF(Cache, "Block for addr %#llx being updated in Cache\n",
470                pkt->getAddr());
471
472        const bool allocate = (writeAllocator && mshr->wasWholeLineWrite) ?
473            writeAllocator->allocate() : mshr->allocOnFill();
474        blk = handleFill(pkt, blk, writebacks, allocate);
475        assert(blk != nullptr);
476        ppFill->notify(pkt);
477    }
478
479    if (blk && blk->isValid() && pkt->isClean() && !pkt->isInvalidate()) {
480        // The block was marked not readable while there was a pending
481        // cache maintenance operation, restore its flag.
482        blk->status |= BlkReadable;
483
484        // This was a cache clean operation (without invalidate)
485        // and we have a copy of the block already. Since there
486        // is no invalidation, we can promote targets that don't
487        // require a writable copy
488        mshr->promoteReadable();
489    }
490
491    if (blk && blk->isWritable() && !pkt->req->isCacheInvalidate()) {
492        // If at this point the referenced block is writable and the
493        // response is not a cache invalidate, we promote targets that
494        // were deferred as we couldn't guarrantee a writable copy
495        mshr->promoteWritable();
496    }
497
498    serviceMSHRTargets(mshr, pkt, blk);
499
500    if (mshr->promoteDeferredTargets()) {
501        // avoid later read getting stale data while write miss is
502        // outstanding.. see comment in timingAccess()
503        if (blk) {
504            blk->status &= ~BlkReadable;
505        }
506        mshrQueue.markPending(mshr);
507        schedMemSideSendEvent(clockEdge() + pkt->payloadDelay);
508    } else {
509        // while we deallocate an mshr from the queue we still have to
510        // check the isFull condition before and after as we might
511        // have been using the reserved entries already
512        const bool was_full = mshrQueue.isFull();
513        mshrQueue.deallocate(mshr);
514        if (was_full && !mshrQueue.isFull()) {
515            clearBlocked(Blocked_NoMSHRs);
516        }
517
518        // Request the bus for a prefetch if this deallocation freed enough
519        // MSHRs for a prefetch to take place
520        if (prefetcher && mshrQueue.canPrefetch()) {
521            Tick next_pf_time = std::max(prefetcher->nextPrefetchReadyTime(),
522                                         clockEdge());
523            if (next_pf_time != MaxTick)
524                schedMemSideSendEvent(next_pf_time);
525        }
526    }
527
528    // if we used temp block, check to see if its valid and then clear it out
529    if (blk == tempBlock && tempBlock->isValid()) {
530        evictBlock(blk, writebacks);
531    }
532
533    const Tick forward_time = clockEdge(forwardLatency) + pkt->headerDelay;
534    // copy writebacks to write buffer
535    doWritebacks(writebacks, forward_time);
536
537    DPRINTF(CacheVerbose, "%s: Leaving with %s\n", __func__, pkt->print());
538    delete pkt;
539}
540
541
542Tick
543BaseCache::recvAtomic(PacketPtr pkt)
544{
545    // should assert here that there are no outstanding MSHRs or
546    // writebacks... that would mean that someone used an atomic
547    // access in timing mode
548
549    // We use lookupLatency here because it is used to specify the latency
550    // to access.
551    Cycles lat = lookupLatency;
552
553    CacheBlk *blk = nullptr;
554    PacketList writebacks;
555    bool satisfied = access(pkt, blk, lat, writebacks);
556
557    if (pkt->isClean() && blk && blk->isDirty()) {
558        // A cache clean opearation is looking for a dirty
559        // block. If a dirty block is encountered a WriteClean
560        // will update any copies to the path to the memory
561        // until the point of reference.
562        DPRINTF(CacheVerbose, "%s: packet %s found block: %s\n",
563                __func__, pkt->print(), blk->print());
564        PacketPtr wb_pkt = writecleanBlk(blk, pkt->req->getDest(), pkt->id);
565        writebacks.push_back(wb_pkt);
566        pkt->setSatisfied();
567    }
568
569    // handle writebacks resulting from the access here to ensure they
570    // logically precede anything happening below
571    doWritebacksAtomic(writebacks);
572    assert(writebacks.empty());
573
574    if (!satisfied) {
575        lat += handleAtomicReqMiss(pkt, blk, writebacks);
576    }
577
578    // Note that we don't invoke the prefetcher at all in atomic mode.
579    // It's not clear how to do it properly, particularly for
580    // prefetchers that aggressively generate prefetch candidates and
581    // rely on bandwidth contention to throttle them; these will tend
582    // to pollute the cache in atomic mode since there is no bandwidth
583    // contention.  If we ever do want to enable prefetching in atomic
584    // mode, though, this is the place to do it... see timingAccess()
585    // for an example (though we'd want to issue the prefetch(es)
586    // immediately rather than calling requestMemSideBus() as we do
587    // there).
588
589    // do any writebacks resulting from the response handling
590    doWritebacksAtomic(writebacks);
591
592    // if we used temp block, check to see if its valid and if so
593    // clear it out, but only do so after the call to recvAtomic is
594    // finished so that any downstream observers (such as a snoop
595    // filter), first see the fill, and only then see the eviction
596    if (blk == tempBlock && tempBlock->isValid()) {
597        // the atomic CPU calls recvAtomic for fetch and load/store
598        // sequentuially, and we may already have a tempBlock
599        // writeback from the fetch that we have not yet sent
600        if (tempBlockWriteback) {
601            // if that is the case, write the prevoius one back, and
602            // do not schedule any new event
603            writebackTempBlockAtomic();
604        } else {
605            // the writeback/clean eviction happens after the call to
606            // recvAtomic has finished (but before any successive
607            // calls), so that the response handling from the fill is
608            // allowed to happen first
609            schedule(writebackTempBlockAtomicEvent, curTick());
610        }
611
612        tempBlockWriteback = evictBlock(blk);
613    }
614
615    if (pkt->needsResponse()) {
616        pkt->makeAtomicResponse();
617    }
618
619    return lat * clockPeriod();
620}
621
622void
623BaseCache::functionalAccess(PacketPtr pkt, bool from_cpu_side)
624{
625    Addr blk_addr = pkt->getBlockAddr(blkSize);
626    bool is_secure = pkt->isSecure();
627    CacheBlk *blk = tags->findBlock(pkt->getAddr(), is_secure);
628    MSHR *mshr = mshrQueue.findMatch(blk_addr, is_secure);
629
630    pkt->pushLabel(name());
631
632    CacheBlkPrintWrapper cbpw(blk);
633
634    // Note that just because an L2/L3 has valid data doesn't mean an
635    // L1 doesn't have a more up-to-date modified copy that still
636    // needs to be found.  As a result we always update the request if
637    // we have it, but only declare it satisfied if we are the owner.
638
639    // see if we have data at all (owned or otherwise)
640    bool have_data = blk && blk->isValid()
641        && pkt->trySatisfyFunctional(&cbpw, blk_addr, is_secure, blkSize,
642                                     blk->data);
643
644    // data we have is dirty if marked as such or if we have an
645    // in-service MSHR that is pending a modified line
646    bool have_dirty =
647        have_data && (blk->isDirty() ||
648                      (mshr && mshr->inService && mshr->isPendingModified()));
649
650    bool done = have_dirty ||
651        cpuSidePort.trySatisfyFunctional(pkt) ||
652        mshrQueue.trySatisfyFunctional(pkt) ||
653        writeBuffer.trySatisfyFunctional(pkt) ||
654        memSidePort.trySatisfyFunctional(pkt);
655
656    DPRINTF(CacheVerbose, "%s: %s %s%s%s\n", __func__,  pkt->print(),
657            (blk && blk->isValid()) ? "valid " : "",
658            have_data ? "data " : "", done ? "done " : "");
659
660    // We're leaving the cache, so pop cache->name() label
661    pkt->popLabel();
662
663    if (done) {
664        pkt->makeResponse();
665    } else {
666        // if it came as a request from the CPU side then make sure it
667        // continues towards the memory side
668        if (from_cpu_side) {
669            memSidePort.sendFunctional(pkt);
670        } else if (cpuSidePort.isSnooping()) {
671            // if it came from the memory side, it must be a snoop request
672            // and we should only forward it if we are forwarding snoops
673            cpuSidePort.sendFunctionalSnoop(pkt);
674        }
675    }
676}
677
678
679void
680BaseCache::cmpAndSwap(CacheBlk *blk, PacketPtr pkt)
681{
682    assert(pkt->isRequest());
683
684    uint64_t overwrite_val;
685    bool overwrite_mem;
686    uint64_t condition_val64;
687    uint32_t condition_val32;
688
689    int offset = pkt->getOffset(blkSize);
690    uint8_t *blk_data = blk->data + offset;
691
692    assert(sizeof(uint64_t) >= pkt->getSize());
693
694    overwrite_mem = true;
695    // keep a copy of our possible write value, and copy what is at the
696    // memory address into the packet
697    pkt->writeData((uint8_t *)&overwrite_val);
698    pkt->setData(blk_data);
699
700    if (pkt->req->isCondSwap()) {
701        if (pkt->getSize() == sizeof(uint64_t)) {
702            condition_val64 = pkt->req->getExtraData();
703            overwrite_mem = !std::memcmp(&condition_val64, blk_data,
704                                         sizeof(uint64_t));
705        } else if (pkt->getSize() == sizeof(uint32_t)) {
706            condition_val32 = (uint32_t)pkt->req->getExtraData();
707            overwrite_mem = !std::memcmp(&condition_val32, blk_data,
708                                         sizeof(uint32_t));
709        } else
710            panic("Invalid size for conditional read/write\n");
711    }
712
713    if (overwrite_mem) {
714        std::memcpy(blk_data, &overwrite_val, pkt->getSize());
715        blk->status |= BlkDirty;
716    }
717}
718
719QueueEntry*
720BaseCache::getNextQueueEntry()
721{
722    // Check both MSHR queue and write buffer for potential requests,
723    // note that null does not mean there is no request, it could
724    // simply be that it is not ready
725    MSHR *miss_mshr  = mshrQueue.getNext();
726    WriteQueueEntry *wq_entry = writeBuffer.getNext();
727
728    // If we got a write buffer request ready, first priority is a
729    // full write buffer, otherwise we favour the miss requests
730    if (wq_entry && (writeBuffer.isFull() || !miss_mshr)) {
731        // need to search MSHR queue for conflicting earlier miss.
732        MSHR *conflict_mshr = mshrQueue.findPending(wq_entry);
733
734        if (conflict_mshr && conflict_mshr->order < wq_entry->order) {
735            // Service misses in order until conflict is cleared.
736            return conflict_mshr;
737
738            // @todo Note that we ignore the ready time of the conflict here
739        }
740
741        // No conflicts; issue write
742        return wq_entry;
743    } else if (miss_mshr) {
744        // need to check for conflicting earlier writeback
745        WriteQueueEntry *conflict_mshr = writeBuffer.findPending(miss_mshr);
746        if (conflict_mshr) {
747            // not sure why we don't check order here... it was in the
748            // original code but commented out.
749
750            // The only way this happens is if we are
751            // doing a write and we didn't have permissions
752            // then subsequently saw a writeback (owned got evicted)
753            // We need to make sure to perform the writeback first
754            // To preserve the dirty data, then we can issue the write
755
756            // should we return wq_entry here instead?  I.e. do we
757            // have to flush writes in order?  I don't think so... not
758            // for Alpha anyway.  Maybe for x86?
759            return conflict_mshr;
760
761            // @todo Note that we ignore the ready time of the conflict here
762        }
763
764        // No conflicts; issue read
765        return miss_mshr;
766    }
767
768    // fall through... no pending requests.  Try a prefetch.
769    assert(!miss_mshr && !wq_entry);
770    if (prefetcher && mshrQueue.canPrefetch()) {
771        // If we have a miss queue slot, we can try a prefetch
772        PacketPtr pkt = prefetcher->getPacket();
773        if (pkt) {
774            Addr pf_addr = pkt->getBlockAddr(blkSize);
775            if (!tags->findBlock(pf_addr, pkt->isSecure()) &&
776                !mshrQueue.findMatch(pf_addr, pkt->isSecure()) &&
777                !writeBuffer.findMatch(pf_addr, pkt->isSecure())) {
778                // Update statistic on number of prefetches issued
779                // (hwpf_mshr_misses)
780                assert(pkt->req->masterId() < system->maxMasters());
781                mshr_misses[pkt->cmdToIndex()][pkt->req->masterId()]++;
782
783                // allocate an MSHR and return it, note
784                // that we send the packet straight away, so do not
785                // schedule the send
786                return allocateMissBuffer(pkt, curTick(), false);
787            } else {
788                // free the request and packet
789                delete pkt;
790            }
791        }
792    }
793
794    return nullptr;
795}
796
797void
798BaseCache::satisfyRequest(PacketPtr pkt, CacheBlk *blk, bool, bool)
799{
800    assert(pkt->isRequest());
801
802    assert(blk && blk->isValid());
803    // Occasionally this is not true... if we are a lower-level cache
804    // satisfying a string of Read and ReadEx requests from
805    // upper-level caches, a Read will mark the block as shared but we
806    // can satisfy a following ReadEx anyway since we can rely on the
807    // Read requester(s) to have buffered the ReadEx snoop and to
808    // invalidate their blocks after receiving them.
809    // assert(!pkt->needsWritable() || blk->isWritable());
810    assert(pkt->getOffset(blkSize) + pkt->getSize() <= blkSize);
811
812    // Check RMW operations first since both isRead() and
813    // isWrite() will be true for them
814    if (pkt->cmd == MemCmd::SwapReq) {
815        if (pkt->isAtomicOp()) {
816            // extract data from cache and save it into the data field in
817            // the packet as a return value from this atomic op
818            int offset = tags->extractBlkOffset(pkt->getAddr());
819            uint8_t *blk_data = blk->data + offset;
820            pkt->setData(blk_data);
821
822            // execute AMO operation
823            (*(pkt->getAtomicOp()))(blk_data);
824
825            // set block status to dirty
826            blk->status |= BlkDirty;
827        } else {
828            cmpAndSwap(blk, pkt);
829        }
830    } else if (pkt->isWrite()) {
831        // we have the block in a writable state and can go ahead,
832        // note that the line may be also be considered writable in
833        // downstream caches along the path to memory, but always
834        // Exclusive, and never Modified
835        assert(blk->isWritable());
836        // Write or WriteLine at the first cache with block in writable state
837        if (blk->checkWrite(pkt)) {
838            pkt->writeDataToBlock(blk->data, blkSize);
839        }
840        // Always mark the line as dirty (and thus transition to the
841        // Modified state) even if we are a failed StoreCond so we
842        // supply data to any snoops that have appended themselves to
843        // this cache before knowing the store will fail.
844        blk->status |= BlkDirty;
845        DPRINTF(CacheVerbose, "%s for %s (write)\n", __func__, pkt->print());
846    } else if (pkt->isRead()) {
847        if (pkt->isLLSC()) {
848            blk->trackLoadLocked(pkt);
849        }
850
851        // all read responses have a data payload
852        assert(pkt->hasRespData());
853        pkt->setDataFromBlock(blk->data, blkSize);
854    } else if (pkt->isUpgrade()) {
855        // sanity check
856        assert(!pkt->hasSharers());
857
858        if (blk->isDirty()) {
859            // we were in the Owned state, and a cache above us that
860            // has the line in Shared state needs to be made aware
861            // that the data it already has is in fact dirty
862            pkt->setCacheResponding();
863            blk->status &= ~BlkDirty;
864        }
865    } else if (pkt->isClean()) {
866        blk->status &= ~BlkDirty;
867    } else {
868        assert(pkt->isInvalidate());
869        invalidateBlock(blk);
870        DPRINTF(CacheVerbose, "%s for %s (invalidation)\n", __func__,
871                pkt->print());
872    }
873}
874
875/////////////////////////////////////////////////////
876//
877// Access path: requests coming in from the CPU side
878//
879/////////////////////////////////////////////////////
880Cycles
881BaseCache::calculateTagOnlyLatency(const uint32_t delay,
882                                   const Cycles lookup_lat) const
883{
884    // A tag-only access has to wait for the packet to arrive in order to
885    // perform the tag lookup.
886    return ticksToCycles(delay) + lookup_lat;
887}
888
889Cycles
890BaseCache::calculateAccessLatency(const CacheBlk* blk, const uint32_t delay,
891                                  const Cycles lookup_lat) const
892{
893    Cycles lat(0);
894
895    if (blk != nullptr) {
896        // As soon as the access arrives, for sequential accesses first access
897        // tags, then the data entry. In the case of parallel accesses the
898        // latency is dictated by the slowest of tag and data latencies.
899        if (sequentialAccess) {
900            lat = ticksToCycles(delay) + lookup_lat + dataLatency;
901        } else {
902            lat = ticksToCycles(delay) + std::max(lookup_lat, dataLatency);
903        }
904
905        // Check if the block to be accessed is available. If not, apply the
906        // access latency on top of when the block is ready to be accessed.
907        const Tick tick = curTick() + delay;
908        const Tick when_ready = blk->getWhenReady();
909        if (when_ready > tick &&
910            ticksToCycles(when_ready - tick) > lat) {
911            lat += ticksToCycles(when_ready - tick);
912        }
913    } else {
914        // In case of a miss, we neglect the data access in a parallel
915        // configuration (i.e., the data access will be stopped as soon as
916        // we find out it is a miss), and use the tag-only latency.
917        lat = calculateTagOnlyLatency(delay, lookup_lat);
918    }
919
920    return lat;
921}
922
923bool
924BaseCache::access(PacketPtr pkt, CacheBlk *&blk, Cycles &lat,
925                  PacketList &writebacks)
926{
927    // sanity check
928    assert(pkt->isRequest());
929
930    chatty_assert(!(isReadOnly && pkt->isWrite()),
931                  "Should never see a write in a read-only cache %s\n",
932                  name());
933
934    // Access block in the tags
935    Cycles tag_latency(0);
936    blk = tags->accessBlock(pkt->getAddr(), pkt->isSecure(), tag_latency);
937
938    DPRINTF(Cache, "%s for %s %s\n", __func__, pkt->print(),
939            blk ? "hit " + blk->print() : "miss");
940
941    if (pkt->req->isCacheMaintenance()) {
942        // A cache maintenance operation is always forwarded to the
943        // memory below even if the block is found in dirty state.
944
945        // We defer any changes to the state of the block until we
946        // create and mark as in service the mshr for the downstream
947        // packet.
948
949        // Calculate access latency on top of when the packet arrives. This
950        // takes into account the bus delay.
951        lat = calculateTagOnlyLatency(pkt->headerDelay, tag_latency);
952
953        return false;
954    }
955
956    if (pkt->isEviction()) {
957        // We check for presence of block in above caches before issuing
958        // Writeback or CleanEvict to write buffer. Therefore the only
959        // possible cases can be of a CleanEvict packet coming from above
960        // encountering a Writeback generated in this cache peer cache and
961        // waiting in the write buffer. Cases of upper level peer caches
962        // generating CleanEvict and Writeback or simply CleanEvict and
963        // CleanEvict almost simultaneously will be caught by snoops sent out
964        // by crossbar.
965        WriteQueueEntry *wb_entry = writeBuffer.findMatch(pkt->getAddr(),
966                                                          pkt->isSecure());
967        if (wb_entry) {
968            assert(wb_entry->getNumTargets() == 1);
969            PacketPtr wbPkt = wb_entry->getTarget()->pkt;
970            assert(wbPkt->isWriteback());
971
972            if (pkt->isCleanEviction()) {
973                // The CleanEvict and WritebackClean snoops into other
974                // peer caches of the same level while traversing the
975                // crossbar. If a copy of the block is found, the
976                // packet is deleted in the crossbar. Hence, none of
977                // the other upper level caches connected to this
978                // cache have the block, so we can clear the
979                // BLOCK_CACHED flag in the Writeback if set and
980                // discard the CleanEvict by returning true.
981                wbPkt->clearBlockCached();
982
983                // A clean evict does not need to access the data array
984                lat = calculateTagOnlyLatency(pkt->headerDelay, tag_latency);
985
986                return true;
987            } else {
988                assert(pkt->cmd == MemCmd::WritebackDirty);
989                // Dirty writeback from above trumps our clean
990                // writeback... discard here
991                // Note: markInService will remove entry from writeback buffer.
992                markInService(wb_entry);
993                delete wbPkt;
994            }
995        }
996    }
997
998    // Writeback handling is special case.  We can write the block into
999    // the cache without having a writeable copy (or any copy at all).
1000    if (pkt->isWriteback()) {
1001        assert(blkSize == pkt->getSize());
1002
1003        // we could get a clean writeback while we are having
1004        // outstanding accesses to a block, do the simple thing for
1005        // now and drop the clean writeback so that we do not upset
1006        // any ordering/decisions about ownership already taken
1007        if (pkt->cmd == MemCmd::WritebackClean &&
1008            mshrQueue.findMatch(pkt->getAddr(), pkt->isSecure())) {
1009            DPRINTF(Cache, "Clean writeback %#llx to block with MSHR, "
1010                    "dropping\n", pkt->getAddr());
1011
1012            // A writeback searches for the block, then writes the data.
1013            // As the writeback is being dropped, the data is not touched,
1014            // and we just had to wait for the time to find a match in the
1015            // MSHR. As of now assume a mshr queue search takes as long as
1016            // a tag lookup for simplicity.
1017            lat = calculateTagOnlyLatency(pkt->headerDelay, tag_latency);
1018
1019            return true;
1020        }
1021
1022        if (!blk) {
1023            // need to do a replacement
1024            blk = allocateBlock(pkt, writebacks);
1025            if (!blk) {
1026                // no replaceable block available: give up, fwd to next level.
1027                incMissCount(pkt);
1028
1029                // A writeback searches for the block, then writes the data.
1030                // As the block could not be found, it was a tag-only access.
1031                lat = calculateTagOnlyLatency(pkt->headerDelay, tag_latency);
1032
1033                return false;
1034            }
1035
1036            blk->status |= BlkReadable;
1037        }
1038        // only mark the block dirty if we got a writeback command,
1039        // and leave it as is for a clean writeback
1040        if (pkt->cmd == MemCmd::WritebackDirty) {
1041            // TODO: the coherent cache can assert(!blk->isDirty());
1042            blk->status |= BlkDirty;
1043        }
1044        // if the packet does not have sharers, it is passing
1045        // writable, and we got the writeback in Modified or Exclusive
1046        // state, if not we are in the Owned or Shared state
1047        if (!pkt->hasSharers()) {
1048            blk->status |= BlkWritable;
1049        }
1050        // nothing else to do; writeback doesn't expect response
1051        assert(!pkt->needsResponse());
1052        pkt->writeDataToBlock(blk->data, blkSize);
1053        DPRINTF(Cache, "%s new state is %s\n", __func__, blk->print());
1054        incHitCount(pkt);
1055
1056        // A writeback searches for the block, then writes the data
1057        lat = calculateAccessLatency(blk, pkt->headerDelay, tag_latency);
1058
1059        // When the packet metadata arrives, the tag lookup will be done while
1060        // the payload is arriving. Then the block will be ready to access as
1061        // soon as the fill is done
1062        blk->setWhenReady(clockEdge(fillLatency) + pkt->headerDelay +
1063            std::max(cyclesToTicks(tag_latency), (uint64_t)pkt->payloadDelay));
1064
1065        return true;
1066    } else if (pkt->cmd == MemCmd::CleanEvict) {
1067        // A CleanEvict does not need to access the data array
1068        lat = calculateTagOnlyLatency(pkt->headerDelay, tag_latency);
1069
1070        if (blk) {
1071            // Found the block in the tags, need to stop CleanEvict from
1072            // propagating further down the hierarchy. Returning true will
1073            // treat the CleanEvict like a satisfied write request and delete
1074            // it.
1075            return true;
1076        }
1077        // We didn't find the block here, propagate the CleanEvict further
1078        // down the memory hierarchy. Returning false will treat the CleanEvict
1079        // like a Writeback which could not find a replaceable block so has to
1080        // go to next level.
1081        return false;
1082    } else if (pkt->cmd == MemCmd::WriteClean) {
1083        // WriteClean handling is a special case. We can allocate a
1084        // block directly if it doesn't exist and we can update the
1085        // block immediately. The WriteClean transfers the ownership
1086        // of the block as well.
1087        assert(blkSize == pkt->getSize());
1088
1089        if (!blk) {
1090            if (pkt->writeThrough()) {
1091                // A writeback searches for the block, then writes the data.
1092                // As the block could not be found, it was a tag-only access.
1093                lat = calculateTagOnlyLatency(pkt->headerDelay, tag_latency);
1094
1095                // if this is a write through packet, we don't try to
1096                // allocate if the block is not present
1097                return false;
1098            } else {
1099                // a writeback that misses needs to allocate a new block
1100                blk = allocateBlock(pkt, writebacks);
1101                if (!blk) {
1102                    // no replaceable block available: give up, fwd to
1103                    // next level.
1104                    incMissCount(pkt);
1105
1106                    // A writeback searches for the block, then writes the
1107                    // data. As the block could not be found, it was a tag-only
1108                    // access.
1109                    lat = calculateTagOnlyLatency(pkt->headerDelay,
1110                                                  tag_latency);
1111
1112                    return false;
1113                }
1114
1115                blk->status |= BlkReadable;
1116            }
1117        }
1118
1119        // at this point either this is a writeback or a write-through
1120        // write clean operation and the block is already in this
1121        // cache, we need to update the data and the block flags
1122        assert(blk);
1123        // TODO: the coherent cache can assert(!blk->isDirty());
1124        if (!pkt->writeThrough()) {
1125            blk->status |= BlkDirty;
1126        }
1127        // nothing else to do; writeback doesn't expect response
1128        assert(!pkt->needsResponse());
1129        pkt->writeDataToBlock(blk->data, blkSize);
1130        DPRINTF(Cache, "%s new state is %s\n", __func__, blk->print());
1131
1132        incHitCount(pkt);
1133
1134        // A writeback searches for the block, then writes the data
1135        lat = calculateAccessLatency(blk, pkt->headerDelay, tag_latency);
1136
1137        // When the packet metadata arrives, the tag lookup will be done while
1138        // the payload is arriving. Then the block will be ready to access as
1139        // soon as the fill is done
1140        blk->setWhenReady(clockEdge(fillLatency) + pkt->headerDelay +
1141            std::max(cyclesToTicks(tag_latency), (uint64_t)pkt->payloadDelay));
1142
1143        // if this a write-through packet it will be sent to cache
1144        // below
1145        return !pkt->writeThrough();
1146    } else if (blk && (pkt->needsWritable() ? blk->isWritable() :
1147                       blk->isReadable())) {
1148        // OK to satisfy access
1149        incHitCount(pkt);
1150
1151        // Calculate access latency based on the need to access the data array
1152        if (pkt->isRead() || pkt->isWrite()) {
1153            lat = calculateAccessLatency(blk, pkt->headerDelay, tag_latency);
1154        } else {
1155            lat = calculateTagOnlyLatency(pkt->headerDelay, tag_latency);
1156        }
1157
1158        satisfyRequest(pkt, blk);
1159        maintainClusivity(pkt->fromCache(), blk);
1160
1161        return true;
1162    }
1163
1164    // Can't satisfy access normally... either no block (blk == nullptr)
1165    // or have block but need writable
1166
1167    incMissCount(pkt);
1168
1169    lat = calculateAccessLatency(blk, pkt->headerDelay, tag_latency);
1170
1171    if (!blk && pkt->isLLSC() && pkt->isWrite()) {
1172        // complete miss on store conditional... just give up now
1173        pkt->req->setExtraData(0);
1174        return true;
1175    }
1176
1177    return false;
1178}
1179
1180void
1181BaseCache::maintainClusivity(bool from_cache, CacheBlk *blk)
1182{
1183    if (from_cache && blk && blk->isValid() && !blk->isDirty() &&
1184        clusivity == Enums::mostly_excl) {
1185        // if we have responded to a cache, and our block is still
1186        // valid, but not dirty, and this cache is mostly exclusive
1187        // with respect to the cache above, drop the block
1188        invalidateBlock(blk);
1189    }
1190}
1191
1192CacheBlk*
1193BaseCache::handleFill(PacketPtr pkt, CacheBlk *blk, PacketList &writebacks,
1194                      bool allocate)
1195{
1196    assert(pkt->isResponse());
1197    Addr addr = pkt->getAddr();
1198    bool is_secure = pkt->isSecure();
1199#if TRACING_ON
1200    CacheBlk::State old_state = blk ? blk->status : 0;
1201#endif
1202
1203    // When handling a fill, we should have no writes to this line.
1204    assert(addr == pkt->getBlockAddr(blkSize));
1205    assert(!writeBuffer.findMatch(addr, is_secure));
1206
1207    if (!blk) {
1208        // better have read new data...
1209        assert(pkt->hasData() || pkt->cmd == MemCmd::InvalidateResp);
1210
1211        // need to do a replacement if allocating, otherwise we stick
1212        // with the temporary storage
1213        blk = allocate ? allocateBlock(pkt, writebacks) : nullptr;
1214
1215        if (!blk) {
1216            // No replaceable block or a mostly exclusive
1217            // cache... just use temporary storage to complete the
1218            // current request and then get rid of it
1219            blk = tempBlock;
1220            tempBlock->insert(addr, is_secure);
1221            DPRINTF(Cache, "using temp block for %#llx (%s)\n", addr,
1222                    is_secure ? "s" : "ns");
1223        }
1224    } else {
1225        // existing block... probably an upgrade
1226        // don't clear block status... if block is already dirty we
1227        // don't want to lose that
1228    }
1229
1230    // Block is guaranteed to be valid at this point
1231    assert(blk->isValid());
1232    assert(blk->isSecure() == is_secure);
1233    assert(regenerateBlkAddr(blk) == addr);
1234
1235    blk->status |= BlkReadable;
1236
1237    // sanity check for whole-line writes, which should always be
1238    // marked as writable as part of the fill, and then later marked
1239    // dirty as part of satisfyRequest
1240    if (pkt->cmd == MemCmd::InvalidateResp) {
1241        assert(!pkt->hasSharers());
1242    }
1243
1244    // here we deal with setting the appropriate state of the line,
1245    // and we start by looking at the hasSharers flag, and ignore the
1246    // cacheResponding flag (normally signalling dirty data) if the
1247    // packet has sharers, thus the line is never allocated as Owned
1248    // (dirty but not writable), and always ends up being either
1249    // Shared, Exclusive or Modified, see Packet::setCacheResponding
1250    // for more details
1251    if (!pkt->hasSharers()) {
1252        // we could get a writable line from memory (rather than a
1253        // cache) even in a read-only cache, note that we set this bit
1254        // even for a read-only cache, possibly revisit this decision
1255        blk->status |= BlkWritable;
1256
1257        // check if we got this via cache-to-cache transfer (i.e., from a
1258        // cache that had the block in Modified or Owned state)
1259        if (pkt->cacheResponding()) {
1260            // we got the block in Modified state, and invalidated the
1261            // owners copy
1262            blk->status |= BlkDirty;
1263
1264            chatty_assert(!isReadOnly, "Should never see dirty snoop response "
1265                          "in read-only cache %s\n", name());
1266        }
1267    }
1268
1269    DPRINTF(Cache, "Block addr %#llx (%s) moving from state %x to %s\n",
1270            addr, is_secure ? "s" : "ns", old_state, blk->print());
1271
1272    // if we got new data, copy it in (checking for a read response
1273    // and a response that has data is the same in the end)
1274    if (pkt->isRead()) {
1275        // sanity checks
1276        assert(pkt->hasData());
1277        assert(pkt->getSize() == blkSize);
1278
1279        pkt->writeDataToBlock(blk->data, blkSize);
1280    }
1281    // The block will be ready when the payload arrives and the fill is done
1282    blk->setWhenReady(clockEdge(fillLatency) + pkt->headerDelay +
1283                      pkt->payloadDelay);
1284
1285    return blk;
1286}
1287
1288CacheBlk*
1289BaseCache::allocateBlock(const PacketPtr pkt, PacketList &writebacks)
1290{
1291    // Get address
1292    const Addr addr = pkt->getAddr();
1293
1294    // Get secure bit
1295    const bool is_secure = pkt->isSecure();
1296
1297    // Find replacement victim
1298    std::vector<CacheBlk*> evict_blks;
1299    CacheBlk *victim = tags->findVictim(addr, is_secure, evict_blks);
1300
1301    // It is valid to return nullptr if there is no victim
1302    if (!victim)
1303        return nullptr;
1304
1305    // Print victim block's information
1306    DPRINTF(CacheRepl, "Replacement victim: %s\n", victim->print());
1307
1308    // Check for transient state allocations. If any of the entries listed
1309    // for eviction has a transient state, the allocation fails
1310    for (const auto& blk : evict_blks) {
1311        if (blk->isValid()) {
1312            Addr repl_addr = regenerateBlkAddr(blk);
1313            MSHR *repl_mshr = mshrQueue.findMatch(repl_addr, blk->isSecure());
1314            if (repl_mshr) {
1315                // must be an outstanding upgrade or clean request
1316                // on a block we're about to replace...
1317                assert((!blk->isWritable() && repl_mshr->needsWritable()) ||
1318                       repl_mshr->isCleaning());
1319
1320                // too hard to replace block with transient state
1321                // allocation failed, block not inserted
1322                return nullptr;
1323            }
1324        }
1325    }
1326
1327    // The victim will be replaced by a new entry, so increase the replacement
1328    // counter if a valid block is being replaced
1329    if (victim->isValid()) {
1330        DPRINTF(Cache, "replacement: replacing %#llx (%s) with %#llx "
1331                "(%s): %s\n", regenerateBlkAddr(victim),
1332                victim->isSecure() ? "s" : "ns",
1333                addr, is_secure ? "s" : "ns",
1334                victim->isDirty() ? "writeback" : "clean");
1335
1336        replacements++;
1337    }
1338
1339    // Evict valid blocks associated to this victim block
1340    for (const auto& blk : evict_blks) {
1341        if (blk->isValid()) {
1342            if (blk->wasPrefetched()) {
1343                unusedPrefetches++;
1344            }
1345
1346            evictBlock(blk, writebacks);
1347        }
1348    }
1349
1350    // Insert new block at victimized entry
1351    tags->insertBlock(pkt, victim);
1352
1353    return victim;
1354}
1355
1356void
1357BaseCache::invalidateBlock(CacheBlk *blk)
1358{
1359    // If handling a block present in the Tags, let it do its invalidation
1360    // process, which will update stats and invalidate the block itself
1361    if (blk != tempBlock) {
1362        tags->invalidate(blk);
1363    } else {
1364        tempBlock->invalidate();
1365    }
1366}
1367
1368void
1369BaseCache::evictBlock(CacheBlk *blk, PacketList &writebacks)
1370{
1371    PacketPtr pkt = evictBlock(blk);
1372    if (pkt) {
1373        writebacks.push_back(pkt);
1374    }
1375}
1376
1377PacketPtr
1378BaseCache::writebackBlk(CacheBlk *blk)
1379{
1380    chatty_assert(!isReadOnly || writebackClean,
1381                  "Writeback from read-only cache");
1382    assert(blk && blk->isValid() && (blk->isDirty() || writebackClean));
1383
1384    writebacks[Request::wbMasterId]++;
1385
1386    RequestPtr req = std::make_shared<Request>(
1387        regenerateBlkAddr(blk), blkSize, 0, Request::wbMasterId);
1388
1389    if (blk->isSecure())
1390        req->setFlags(Request::SECURE);
1391
1392    req->taskId(blk->task_id);
1393
1394    PacketPtr pkt =
1395        new Packet(req, blk->isDirty() ?
1396                   MemCmd::WritebackDirty : MemCmd::WritebackClean);
1397
1398    DPRINTF(Cache, "Create Writeback %s writable: %d, dirty: %d\n",
1399            pkt->print(), blk->isWritable(), blk->isDirty());
1400
1401    if (blk->isWritable()) {
1402        // not asserting shared means we pass the block in modified
1403        // state, mark our own block non-writeable
1404        blk->status &= ~BlkWritable;
1405    } else {
1406        // we are in the Owned state, tell the receiver
1407        pkt->setHasSharers();
1408    }
1409
1410    // make sure the block is not marked dirty
1411    blk->status &= ~BlkDirty;
1412
1413    pkt->allocate();
1414    pkt->setDataFromBlock(blk->data, blkSize);
1415
1416    return pkt;
1417}
1418
1419PacketPtr
1420BaseCache::writecleanBlk(CacheBlk *blk, Request::Flags dest, PacketId id)
1421{
1422    RequestPtr req = std::make_shared<Request>(
1423        regenerateBlkAddr(blk), blkSize, 0, Request::wbMasterId);
1424
1425    if (blk->isSecure()) {
1426        req->setFlags(Request::SECURE);
1427    }
1428    req->taskId(blk->task_id);
1429
1430    PacketPtr pkt = new Packet(req, MemCmd::WriteClean, blkSize, id);
1431
1432    if (dest) {
1433        req->setFlags(dest);
1434        pkt->setWriteThrough();
1435    }
1436
1437    DPRINTF(Cache, "Create %s writable: %d, dirty: %d\n", pkt->print(),
1438            blk->isWritable(), blk->isDirty());
1439
1440    if (blk->isWritable()) {
1441        // not asserting shared means we pass the block in modified
1442        // state, mark our own block non-writeable
1443        blk->status &= ~BlkWritable;
1444    } else {
1445        // we are in the Owned state, tell the receiver
1446        pkt->setHasSharers();
1447    }
1448
1449    // make sure the block is not marked dirty
1450    blk->status &= ~BlkDirty;
1451
1452    pkt->allocate();
1453    pkt->setDataFromBlock(blk->data, blkSize);
1454
1455    return pkt;
1456}
1457
1458
1459void
1460BaseCache::memWriteback()
1461{
1462    tags->forEachBlk([this](CacheBlk &blk) { writebackVisitor(blk); });
1463}
1464
1465void
1466BaseCache::memInvalidate()
1467{
1468    tags->forEachBlk([this](CacheBlk &blk) { invalidateVisitor(blk); });
1469}
1470
1471bool
1472BaseCache::isDirty() const
1473{
1474    return tags->anyBlk([](CacheBlk &blk) { return blk.isDirty(); });
1475}
1476
1477bool
1478BaseCache::coalesce() const
1479{
1480    return writeAllocator && writeAllocator->coalesce();
1481}
1482
1483void
1484BaseCache::writebackVisitor(CacheBlk &blk)
1485{
1486    if (blk.isDirty()) {
1487        assert(blk.isValid());
1488
1489        RequestPtr request = std::make_shared<Request>(
1490            regenerateBlkAddr(&blk), blkSize, 0, Request::funcMasterId);
1491
1492        request->taskId(blk.task_id);
1493        if (blk.isSecure()) {
1494            request->setFlags(Request::SECURE);
1495        }
1496
1497        Packet packet(request, MemCmd::WriteReq);
1498        packet.dataStatic(blk.data);
1499
1500        memSidePort.sendFunctional(&packet);
1501
1502        blk.status &= ~BlkDirty;
1503    }
1504}
1505
1506void
1507BaseCache::invalidateVisitor(CacheBlk &blk)
1508{
1509    if (blk.isDirty())
1510        warn_once("Invalidating dirty cache lines. " \
1511                  "Expect things to break.\n");
1512
1513    if (blk.isValid()) {
1514        assert(!blk.isDirty());
1515        invalidateBlock(&blk);
1516    }
1517}
1518
1519Tick
1520BaseCache::nextQueueReadyTime() const
1521{
1522    Tick nextReady = std::min(mshrQueue.nextReadyTime(),
1523                              writeBuffer.nextReadyTime());
1524
1525    // Don't signal prefetch ready time if no MSHRs available
1526    // Will signal once enoguh MSHRs are deallocated
1527    if (prefetcher && mshrQueue.canPrefetch()) {
1528        nextReady = std::min(nextReady,
1529                             prefetcher->nextPrefetchReadyTime());
1530    }
1531
1532    return nextReady;
1533}
1534
1535
1536bool
1537BaseCache::sendMSHRQueuePacket(MSHR* mshr)
1538{
1539    assert(mshr);
1540
1541    // use request from 1st target
1542    PacketPtr tgt_pkt = mshr->getTarget()->pkt;
1543
1544    DPRINTF(Cache, "%s: MSHR %s\n", __func__, tgt_pkt->print());
1545
1546    // if the cache is in write coalescing mode or (additionally) in
1547    // no allocation mode, and we have a write packet with an MSHR
1548    // that is not a whole-line write (due to incompatible flags etc),
1549    // then reset the write mode
1550    if (writeAllocator && writeAllocator->coalesce() && tgt_pkt->isWrite()) {
1551        if (!mshr->isWholeLineWrite()) {
1552            // if we are currently write coalescing, hold on the
1553            // MSHR as many cycles extra as we need to completely
1554            // write a cache line
1555            if (writeAllocator->delay(mshr->blkAddr)) {
1556                Tick delay = blkSize / tgt_pkt->getSize() * clockPeriod();
1557                DPRINTF(CacheVerbose, "Delaying pkt %s %llu ticks to allow "
1558                        "for write coalescing\n", tgt_pkt->print(), delay);
1559                mshrQueue.delay(mshr, delay);
1560                return false;
1561            } else {
1562                writeAllocator->reset();
1563            }
1564        } else {
1565            writeAllocator->resetDelay(mshr->blkAddr);
1566        }
1567    }
1568
1569    CacheBlk *blk = tags->findBlock(mshr->blkAddr, mshr->isSecure);
1570
1571    // either a prefetch that is not present upstream, or a normal
1572    // MSHR request, proceed to get the packet to send downstream
1573    PacketPtr pkt = createMissPacket(tgt_pkt, blk, mshr->needsWritable(),
1574                                     mshr->isWholeLineWrite());
1575
1576    mshr->isForward = (pkt == nullptr);
1577
1578    if (mshr->isForward) {
1579        // not a cache block request, but a response is expected
1580        // make copy of current packet to forward, keep current
1581        // copy for response handling
1582        pkt = new Packet(tgt_pkt, false, true);
1583        assert(!pkt->isWrite());
1584    }
1585
1586    // play it safe and append (rather than set) the sender state,
1587    // as forwarded packets may already have existing state
1588    pkt->pushSenderState(mshr);
1589
1590    if (pkt->isClean() && blk && blk->isDirty()) {
1591        // A cache clean opearation is looking for a dirty block. Mark
1592        // the packet so that the destination xbar can determine that
1593        // there will be a follow-up write packet as well.
1594        pkt->setSatisfied();
1595    }
1596
1597    if (!memSidePort.sendTimingReq(pkt)) {
1598        // we are awaiting a retry, but we
1599        // delete the packet and will be creating a new packet
1600        // when we get the opportunity
1601        delete pkt;
1602
1603        // note that we have now masked any requestBus and
1604        // schedSendEvent (we will wait for a retry before
1605        // doing anything), and this is so even if we do not
1606        // care about this packet and might override it before
1607        // it gets retried
1608        return true;
1609    } else {
1610        // As part of the call to sendTimingReq the packet is
1611        // forwarded to all neighbouring caches (and any caches
1612        // above them) as a snoop. Thus at this point we know if
1613        // any of the neighbouring caches are responding, and if
1614        // so, we know it is dirty, and we can determine if it is
1615        // being passed as Modified, making our MSHR the ordering
1616        // point
1617        bool pending_modified_resp = !pkt->hasSharers() &&
1618            pkt->cacheResponding();
1619        markInService(mshr, pending_modified_resp);
1620
1621        if (pkt->isClean() && blk && blk->isDirty()) {
1622            // A cache clean opearation is looking for a dirty
1623            // block. If a dirty block is encountered a WriteClean
1624            // will update any copies to the path to the memory
1625            // until the point of reference.
1626            DPRINTF(CacheVerbose, "%s: packet %s found block: %s\n",
1627                    __func__, pkt->print(), blk->print());
1628            PacketPtr wb_pkt = writecleanBlk(blk, pkt->req->getDest(),
1629                                             pkt->id);
1630            PacketList writebacks;
1631            writebacks.push_back(wb_pkt);
1632            doWritebacks(writebacks, 0);
1633        }
1634
1635        return false;
1636    }
1637}
1638
1639bool
1640BaseCache::sendWriteQueuePacket(WriteQueueEntry* wq_entry)
1641{
1642    assert(wq_entry);
1643
1644    // always a single target for write queue entries
1645    PacketPtr tgt_pkt = wq_entry->getTarget()->pkt;
1646
1647    DPRINTF(Cache, "%s: write %s\n", __func__, tgt_pkt->print());
1648
1649    // forward as is, both for evictions and uncacheable writes
1650    if (!memSidePort.sendTimingReq(tgt_pkt)) {
1651        // note that we have now masked any requestBus and
1652        // schedSendEvent (we will wait for a retry before
1653        // doing anything), and this is so even if we do not
1654        // care about this packet and might override it before
1655        // it gets retried
1656        return true;
1657    } else {
1658        markInService(wq_entry);
1659        return false;
1660    }
1661}
1662
1663void
1664BaseCache::serialize(CheckpointOut &cp) const
1665{
1666    bool dirty(isDirty());
1667
1668    if (dirty) {
1669        warn("*** The cache still contains dirty data. ***\n");
1670        warn("    Make sure to drain the system using the correct flags.\n");
1671        warn("    This checkpoint will not restore correctly " \
1672             "and dirty data in the cache will be lost!\n");
1673    }
1674
1675    // Since we don't checkpoint the data in the cache, any dirty data
1676    // will be lost when restoring from a checkpoint of a system that
1677    // wasn't drained properly. Flag the checkpoint as invalid if the
1678    // cache contains dirty data.
1679    bool bad_checkpoint(dirty);
1680    SERIALIZE_SCALAR(bad_checkpoint);
1681}
1682
1683void
1684BaseCache::unserialize(CheckpointIn &cp)
1685{
1686    bool bad_checkpoint;
1687    UNSERIALIZE_SCALAR(bad_checkpoint);
1688    if (bad_checkpoint) {
1689        fatal("Restoring from checkpoints with dirty caches is not "
1690              "supported in the classic memory system. Please remove any "
1691              "caches or drain them properly before taking checkpoints.\n");
1692    }
1693}
1694
1695void
1696BaseCache::regStats()
1697{
1698    MemObject::regStats();
1699
1700    using namespace Stats;
1701
1702    // Hit statistics
1703    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
1704        MemCmd cmd(access_idx);
1705        const string &cstr = cmd.toString();
1706
1707        hits[access_idx]
1708            .init(system->maxMasters())
1709            .name(name() + "." + cstr + "_hits")
1710            .desc("number of " + cstr + " hits")
1711            .flags(total | nozero | nonan)
1712            ;
1713        for (int i = 0; i < system->maxMasters(); i++) {
1714            hits[access_idx].subname(i, system->getMasterName(i));
1715        }
1716    }
1717
1718// These macros make it easier to sum the right subset of commands and
1719// to change the subset of commands that are considered "demand" vs
1720// "non-demand"
1721#define SUM_DEMAND(s) \
1722    (s[MemCmd::ReadReq] + s[MemCmd::WriteReq] + s[MemCmd::WriteLineReq] + \
1723     s[MemCmd::ReadExReq] + s[MemCmd::ReadCleanReq] + s[MemCmd::ReadSharedReq])
1724
1725// should writebacks be included here?  prior code was inconsistent...
1726#define SUM_NON_DEMAND(s) \
1727    (s[MemCmd::SoftPFReq] + s[MemCmd::HardPFReq] + s[MemCmd::SoftPFExReq])
1728
1729    demandHits
1730        .name(name() + ".demand_hits")
1731        .desc("number of demand (read+write) hits")
1732        .flags(total | nozero | nonan)
1733        ;
1734    demandHits = SUM_DEMAND(hits);
1735    for (int i = 0; i < system->maxMasters(); i++) {
1736        demandHits.subname(i, system->getMasterName(i));
1737    }
1738
1739    overallHits
1740        .name(name() + ".overall_hits")
1741        .desc("number of overall hits")
1742        .flags(total | nozero | nonan)
1743        ;
1744    overallHits = demandHits + SUM_NON_DEMAND(hits);
1745    for (int i = 0; i < system->maxMasters(); i++) {
1746        overallHits.subname(i, system->getMasterName(i));
1747    }
1748
1749    // Miss statistics
1750    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
1751        MemCmd cmd(access_idx);
1752        const string &cstr = cmd.toString();
1753
1754        misses[access_idx]
1755            .init(system->maxMasters())
1756            .name(name() + "." + cstr + "_misses")
1757            .desc("number of " + cstr + " misses")
1758            .flags(total | nozero | nonan)
1759            ;
1760        for (int i = 0; i < system->maxMasters(); i++) {
1761            misses[access_idx].subname(i, system->getMasterName(i));
1762        }
1763    }
1764
1765    demandMisses
1766        .name(name() + ".demand_misses")
1767        .desc("number of demand (read+write) misses")
1768        .flags(total | nozero | nonan)
1769        ;
1770    demandMisses = SUM_DEMAND(misses);
1771    for (int i = 0; i < system->maxMasters(); i++) {
1772        demandMisses.subname(i, system->getMasterName(i));
1773    }
1774
1775    overallMisses
1776        .name(name() + ".overall_misses")
1777        .desc("number of overall misses")
1778        .flags(total | nozero | nonan)
1779        ;
1780    overallMisses = demandMisses + SUM_NON_DEMAND(misses);
1781    for (int i = 0; i < system->maxMasters(); i++) {
1782        overallMisses.subname(i, system->getMasterName(i));
1783    }
1784
1785    // Miss latency statistics
1786    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
1787        MemCmd cmd(access_idx);
1788        const string &cstr = cmd.toString();
1789
1790        missLatency[access_idx]
1791            .init(system->maxMasters())
1792            .name(name() + "." + cstr + "_miss_latency")
1793            .desc("number of " + cstr + " miss cycles")
1794            .flags(total | nozero | nonan)
1795            ;
1796        for (int i = 0; i < system->maxMasters(); i++) {
1797            missLatency[access_idx].subname(i, system->getMasterName(i));
1798        }
1799    }
1800
1801    demandMissLatency
1802        .name(name() + ".demand_miss_latency")
1803        .desc("number of demand (read+write) miss cycles")
1804        .flags(total | nozero | nonan)
1805        ;
1806    demandMissLatency = SUM_DEMAND(missLatency);
1807    for (int i = 0; i < system->maxMasters(); i++) {
1808        demandMissLatency.subname(i, system->getMasterName(i));
1809    }
1810
1811    overallMissLatency
1812        .name(name() + ".overall_miss_latency")
1813        .desc("number of overall miss cycles")
1814        .flags(total | nozero | nonan)
1815        ;
1816    overallMissLatency = demandMissLatency + SUM_NON_DEMAND(missLatency);
1817    for (int i = 0; i < system->maxMasters(); i++) {
1818        overallMissLatency.subname(i, system->getMasterName(i));
1819    }
1820
1821    // access formulas
1822    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
1823        MemCmd cmd(access_idx);
1824        const string &cstr = cmd.toString();
1825
1826        accesses[access_idx]
1827            .name(name() + "." + cstr + "_accesses")
1828            .desc("number of " + cstr + " accesses(hits+misses)")
1829            .flags(total | nozero | nonan)
1830            ;
1831        accesses[access_idx] = hits[access_idx] + misses[access_idx];
1832
1833        for (int i = 0; i < system->maxMasters(); i++) {
1834            accesses[access_idx].subname(i, system->getMasterName(i));
1835        }
1836    }
1837
1838    demandAccesses
1839        .name(name() + ".demand_accesses")
1840        .desc("number of demand (read+write) accesses")
1841        .flags(total | nozero | nonan)
1842        ;
1843    demandAccesses = demandHits + demandMisses;
1844    for (int i = 0; i < system->maxMasters(); i++) {
1845        demandAccesses.subname(i, system->getMasterName(i));
1846    }
1847
1848    overallAccesses
1849        .name(name() + ".overall_accesses")
1850        .desc("number of overall (read+write) accesses")
1851        .flags(total | nozero | nonan)
1852        ;
1853    overallAccesses = overallHits + overallMisses;
1854    for (int i = 0; i < system->maxMasters(); i++) {
1855        overallAccesses.subname(i, system->getMasterName(i));
1856    }
1857
1858    // miss rate formulas
1859    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
1860        MemCmd cmd(access_idx);
1861        const string &cstr = cmd.toString();
1862
1863        missRate[access_idx]
1864            .name(name() + "." + cstr + "_miss_rate")
1865            .desc("miss rate for " + cstr + " accesses")
1866            .flags(total | nozero | nonan)
1867            ;
1868        missRate[access_idx] = misses[access_idx] / accesses[access_idx];
1869
1870        for (int i = 0; i < system->maxMasters(); i++) {
1871            missRate[access_idx].subname(i, system->getMasterName(i));
1872        }
1873    }
1874
1875    demandMissRate
1876        .name(name() + ".demand_miss_rate")
1877        .desc("miss rate for demand accesses")
1878        .flags(total | nozero | nonan)
1879        ;
1880    demandMissRate = demandMisses / demandAccesses;
1881    for (int i = 0; i < system->maxMasters(); i++) {
1882        demandMissRate.subname(i, system->getMasterName(i));
1883    }
1884
1885    overallMissRate
1886        .name(name() + ".overall_miss_rate")
1887        .desc("miss rate for overall accesses")
1888        .flags(total | nozero | nonan)
1889        ;
1890    overallMissRate = overallMisses / overallAccesses;
1891    for (int i = 0; i < system->maxMasters(); i++) {
1892        overallMissRate.subname(i, system->getMasterName(i));
1893    }
1894
1895    // miss latency formulas
1896    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
1897        MemCmd cmd(access_idx);
1898        const string &cstr = cmd.toString();
1899
1900        avgMissLatency[access_idx]
1901            .name(name() + "." + cstr + "_avg_miss_latency")
1902            .desc("average " + cstr + " miss latency")
1903            .flags(total | nozero | nonan)
1904            ;
1905        avgMissLatency[access_idx] =
1906            missLatency[access_idx] / misses[access_idx];
1907
1908        for (int i = 0; i < system->maxMasters(); i++) {
1909            avgMissLatency[access_idx].subname(i, system->getMasterName(i));
1910        }
1911    }
1912
1913    demandAvgMissLatency
1914        .name(name() + ".demand_avg_miss_latency")
1915        .desc("average overall miss latency")
1916        .flags(total | nozero | nonan)
1917        ;
1918    demandAvgMissLatency = demandMissLatency / demandMisses;
1919    for (int i = 0; i < system->maxMasters(); i++) {
1920        demandAvgMissLatency.subname(i, system->getMasterName(i));
1921    }
1922
1923    overallAvgMissLatency
1924        .name(name() + ".overall_avg_miss_latency")
1925        .desc("average overall miss latency")
1926        .flags(total | nozero | nonan)
1927        ;
1928    overallAvgMissLatency = overallMissLatency / overallMisses;
1929    for (int i = 0; i < system->maxMasters(); i++) {
1930        overallAvgMissLatency.subname(i, system->getMasterName(i));
1931    }
1932
1933    blocked_cycles.init(NUM_BLOCKED_CAUSES);
1934    blocked_cycles
1935        .name(name() + ".blocked_cycles")
1936        .desc("number of cycles access was blocked")
1937        .subname(Blocked_NoMSHRs, "no_mshrs")
1938        .subname(Blocked_NoTargets, "no_targets")
1939        ;
1940
1941
1942    blocked_causes.init(NUM_BLOCKED_CAUSES);
1943    blocked_causes
1944        .name(name() + ".blocked")
1945        .desc("number of cycles access was blocked")
1946        .subname(Blocked_NoMSHRs, "no_mshrs")
1947        .subname(Blocked_NoTargets, "no_targets")
1948        ;
1949
1950    avg_blocked
1951        .name(name() + ".avg_blocked_cycles")
1952        .desc("average number of cycles each access was blocked")
1953        .subname(Blocked_NoMSHRs, "no_mshrs")
1954        .subname(Blocked_NoTargets, "no_targets")
1955        ;
1956
1957    avg_blocked = blocked_cycles / blocked_causes;
1958
1959    unusedPrefetches
1960        .name(name() + ".unused_prefetches")
1961        .desc("number of HardPF blocks evicted w/o reference")
1962        .flags(nozero)
1963        ;
1964
1965    writebacks
1966        .init(system->maxMasters())
1967        .name(name() + ".writebacks")
1968        .desc("number of writebacks")
1969        .flags(total | nozero | nonan)
1970        ;
1971    for (int i = 0; i < system->maxMasters(); i++) {
1972        writebacks.subname(i, system->getMasterName(i));
1973    }
1974
1975    // MSHR statistics
1976    // MSHR hit statistics
1977    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
1978        MemCmd cmd(access_idx);
1979        const string &cstr = cmd.toString();
1980
1981        mshr_hits[access_idx]
1982            .init(system->maxMasters())
1983            .name(name() + "." + cstr + "_mshr_hits")
1984            .desc("number of " + cstr + " MSHR hits")
1985            .flags(total | nozero | nonan)
1986            ;
1987        for (int i = 0; i < system->maxMasters(); i++) {
1988            mshr_hits[access_idx].subname(i, system->getMasterName(i));
1989        }
1990    }
1991
1992    demandMshrHits
1993        .name(name() + ".demand_mshr_hits")
1994        .desc("number of demand (read+write) MSHR hits")
1995        .flags(total | nozero | nonan)
1996        ;
1997    demandMshrHits = SUM_DEMAND(mshr_hits);
1998    for (int i = 0; i < system->maxMasters(); i++) {
1999        demandMshrHits.subname(i, system->getMasterName(i));
2000    }
2001
2002    overallMshrHits
2003        .name(name() + ".overall_mshr_hits")
2004        .desc("number of overall MSHR hits")
2005        .flags(total | nozero | nonan)
2006        ;
2007    overallMshrHits = demandMshrHits + SUM_NON_DEMAND(mshr_hits);
2008    for (int i = 0; i < system->maxMasters(); i++) {
2009        overallMshrHits.subname(i, system->getMasterName(i));
2010    }
2011
2012    // MSHR miss statistics
2013    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
2014        MemCmd cmd(access_idx);
2015        const string &cstr = cmd.toString();
2016
2017        mshr_misses[access_idx]
2018            .init(system->maxMasters())
2019            .name(name() + "." + cstr + "_mshr_misses")
2020            .desc("number of " + cstr + " MSHR misses")
2021            .flags(total | nozero | nonan)
2022            ;
2023        for (int i = 0; i < system->maxMasters(); i++) {
2024            mshr_misses[access_idx].subname(i, system->getMasterName(i));
2025        }
2026    }
2027
2028    demandMshrMisses
2029        .name(name() + ".demand_mshr_misses")
2030        .desc("number of demand (read+write) MSHR misses")
2031        .flags(total | nozero | nonan)
2032        ;
2033    demandMshrMisses = SUM_DEMAND(mshr_misses);
2034    for (int i = 0; i < system->maxMasters(); i++) {
2035        demandMshrMisses.subname(i, system->getMasterName(i));
2036    }
2037
2038    overallMshrMisses
2039        .name(name() + ".overall_mshr_misses")
2040        .desc("number of overall MSHR misses")
2041        .flags(total | nozero | nonan)
2042        ;
2043    overallMshrMisses = demandMshrMisses + SUM_NON_DEMAND(mshr_misses);
2044    for (int i = 0; i < system->maxMasters(); i++) {
2045        overallMshrMisses.subname(i, system->getMasterName(i));
2046    }
2047
2048    // MSHR miss latency statistics
2049    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
2050        MemCmd cmd(access_idx);
2051        const string &cstr = cmd.toString();
2052
2053        mshr_miss_latency[access_idx]
2054            .init(system->maxMasters())
2055            .name(name() + "." + cstr + "_mshr_miss_latency")
2056            .desc("number of " + cstr + " MSHR miss cycles")
2057            .flags(total | nozero | nonan)
2058            ;
2059        for (int i = 0; i < system->maxMasters(); i++) {
2060            mshr_miss_latency[access_idx].subname(i, system->getMasterName(i));
2061        }
2062    }
2063
2064    demandMshrMissLatency
2065        .name(name() + ".demand_mshr_miss_latency")
2066        .desc("number of demand (read+write) MSHR miss cycles")
2067        .flags(total | nozero | nonan)
2068        ;
2069    demandMshrMissLatency = SUM_DEMAND(mshr_miss_latency);
2070    for (int i = 0; i < system->maxMasters(); i++) {
2071        demandMshrMissLatency.subname(i, system->getMasterName(i));
2072    }
2073
2074    overallMshrMissLatency
2075        .name(name() + ".overall_mshr_miss_latency")
2076        .desc("number of overall MSHR miss cycles")
2077        .flags(total | nozero | nonan)
2078        ;
2079    overallMshrMissLatency =
2080        demandMshrMissLatency + SUM_NON_DEMAND(mshr_miss_latency);
2081    for (int i = 0; i < system->maxMasters(); i++) {
2082        overallMshrMissLatency.subname(i, system->getMasterName(i));
2083    }
2084
2085    // MSHR uncacheable statistics
2086    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
2087        MemCmd cmd(access_idx);
2088        const string &cstr = cmd.toString();
2089
2090        mshr_uncacheable[access_idx]
2091            .init(system->maxMasters())
2092            .name(name() + "." + cstr + "_mshr_uncacheable")
2093            .desc("number of " + cstr + " MSHR uncacheable")
2094            .flags(total | nozero | nonan)
2095            ;
2096        for (int i = 0; i < system->maxMasters(); i++) {
2097            mshr_uncacheable[access_idx].subname(i, system->getMasterName(i));
2098        }
2099    }
2100
2101    overallMshrUncacheable
2102        .name(name() + ".overall_mshr_uncacheable_misses")
2103        .desc("number of overall MSHR uncacheable misses")
2104        .flags(total | nozero | nonan)
2105        ;
2106    overallMshrUncacheable =
2107        SUM_DEMAND(mshr_uncacheable) + SUM_NON_DEMAND(mshr_uncacheable);
2108    for (int i = 0; i < system->maxMasters(); i++) {
2109        overallMshrUncacheable.subname(i, system->getMasterName(i));
2110    }
2111
2112    // MSHR miss latency statistics
2113    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
2114        MemCmd cmd(access_idx);
2115        const string &cstr = cmd.toString();
2116
2117        mshr_uncacheable_lat[access_idx]
2118            .init(system->maxMasters())
2119            .name(name() + "." + cstr + "_mshr_uncacheable_latency")
2120            .desc("number of " + cstr + " MSHR uncacheable cycles")
2121            .flags(total | nozero | nonan)
2122            ;
2123        for (int i = 0; i < system->maxMasters(); i++) {
2124            mshr_uncacheable_lat[access_idx].subname(
2125                i, system->getMasterName(i));
2126        }
2127    }
2128
2129    overallMshrUncacheableLatency
2130        .name(name() + ".overall_mshr_uncacheable_latency")
2131        .desc("number of overall MSHR uncacheable cycles")
2132        .flags(total | nozero | nonan)
2133        ;
2134    overallMshrUncacheableLatency =
2135        SUM_DEMAND(mshr_uncacheable_lat) +
2136        SUM_NON_DEMAND(mshr_uncacheable_lat);
2137    for (int i = 0; i < system->maxMasters(); i++) {
2138        overallMshrUncacheableLatency.subname(i, system->getMasterName(i));
2139    }
2140
2141#if 0
2142    // MSHR access formulas
2143    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
2144        MemCmd cmd(access_idx);
2145        const string &cstr = cmd.toString();
2146
2147        mshrAccesses[access_idx]
2148            .name(name() + "." + cstr + "_mshr_accesses")
2149            .desc("number of " + cstr + " mshr accesses(hits+misses)")
2150            .flags(total | nozero | nonan)
2151            ;
2152        mshrAccesses[access_idx] =
2153            mshr_hits[access_idx] + mshr_misses[access_idx]
2154            + mshr_uncacheable[access_idx];
2155    }
2156
2157    demandMshrAccesses
2158        .name(name() + ".demand_mshr_accesses")
2159        .desc("number of demand (read+write) mshr accesses")
2160        .flags(total | nozero | nonan)
2161        ;
2162    demandMshrAccesses = demandMshrHits + demandMshrMisses;
2163
2164    overallMshrAccesses
2165        .name(name() + ".overall_mshr_accesses")
2166        .desc("number of overall (read+write) mshr accesses")
2167        .flags(total | nozero | nonan)
2168        ;
2169    overallMshrAccesses = overallMshrHits + overallMshrMisses
2170        + overallMshrUncacheable;
2171#endif
2172
2173    // MSHR miss rate formulas
2174    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
2175        MemCmd cmd(access_idx);
2176        const string &cstr = cmd.toString();
2177
2178        mshrMissRate[access_idx]
2179            .name(name() + "." + cstr + "_mshr_miss_rate")
2180            .desc("mshr miss rate for " + cstr + " accesses")
2181            .flags(total | nozero | nonan)
2182            ;
2183        mshrMissRate[access_idx] =
2184            mshr_misses[access_idx] / accesses[access_idx];
2185
2186        for (int i = 0; i < system->maxMasters(); i++) {
2187            mshrMissRate[access_idx].subname(i, system->getMasterName(i));
2188        }
2189    }
2190
2191    demandMshrMissRate
2192        .name(name() + ".demand_mshr_miss_rate")
2193        .desc("mshr miss rate for demand accesses")
2194        .flags(total | nozero | nonan)
2195        ;
2196    demandMshrMissRate = demandMshrMisses / demandAccesses;
2197    for (int i = 0; i < system->maxMasters(); i++) {
2198        demandMshrMissRate.subname(i, system->getMasterName(i));
2199    }
2200
2201    overallMshrMissRate
2202        .name(name() + ".overall_mshr_miss_rate")
2203        .desc("mshr miss rate for overall accesses")
2204        .flags(total | nozero | nonan)
2205        ;
2206    overallMshrMissRate = overallMshrMisses / overallAccesses;
2207    for (int i = 0; i < system->maxMasters(); i++) {
2208        overallMshrMissRate.subname(i, system->getMasterName(i));
2209    }
2210
2211    // mshrMiss latency formulas
2212    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
2213        MemCmd cmd(access_idx);
2214        const string &cstr = cmd.toString();
2215
2216        avgMshrMissLatency[access_idx]
2217            .name(name() + "." + cstr + "_avg_mshr_miss_latency")
2218            .desc("average " + cstr + " mshr miss latency")
2219            .flags(total | nozero | nonan)
2220            ;
2221        avgMshrMissLatency[access_idx] =
2222            mshr_miss_latency[access_idx] / mshr_misses[access_idx];
2223
2224        for (int i = 0; i < system->maxMasters(); i++) {
2225            avgMshrMissLatency[access_idx].subname(
2226                i, system->getMasterName(i));
2227        }
2228    }
2229
2230    demandAvgMshrMissLatency
2231        .name(name() + ".demand_avg_mshr_miss_latency")
2232        .desc("average overall mshr miss latency")
2233        .flags(total | nozero | nonan)
2234        ;
2235    demandAvgMshrMissLatency = demandMshrMissLatency / demandMshrMisses;
2236    for (int i = 0; i < system->maxMasters(); i++) {
2237        demandAvgMshrMissLatency.subname(i, system->getMasterName(i));
2238    }
2239
2240    overallAvgMshrMissLatency
2241        .name(name() + ".overall_avg_mshr_miss_latency")
2242        .desc("average overall mshr miss latency")
2243        .flags(total | nozero | nonan)
2244        ;
2245    overallAvgMshrMissLatency = overallMshrMissLatency / overallMshrMisses;
2246    for (int i = 0; i < system->maxMasters(); i++) {
2247        overallAvgMshrMissLatency.subname(i, system->getMasterName(i));
2248    }
2249
2250    // mshrUncacheable latency formulas
2251    for (int access_idx = 0; access_idx < MemCmd::NUM_MEM_CMDS; ++access_idx) {
2252        MemCmd cmd(access_idx);
2253        const string &cstr = cmd.toString();
2254
2255        avgMshrUncacheableLatency[access_idx]
2256            .name(name() + "." + cstr + "_avg_mshr_uncacheable_latency")
2257            .desc("average " + cstr + " mshr uncacheable latency")
2258            .flags(total | nozero | nonan)
2259            ;
2260        avgMshrUncacheableLatency[access_idx] =
2261            mshr_uncacheable_lat[access_idx] / mshr_uncacheable[access_idx];
2262
2263        for (int i = 0; i < system->maxMasters(); i++) {
2264            avgMshrUncacheableLatency[access_idx].subname(
2265                i, system->getMasterName(i));
2266        }
2267    }
2268
2269    overallAvgMshrUncacheableLatency
2270        .name(name() + ".overall_avg_mshr_uncacheable_latency")
2271        .desc("average overall mshr uncacheable latency")
2272        .flags(total | nozero | nonan)
2273        ;
2274    overallAvgMshrUncacheableLatency =
2275        overallMshrUncacheableLatency / overallMshrUncacheable;
2276    for (int i = 0; i < system->maxMasters(); i++) {
2277        overallAvgMshrUncacheableLatency.subname(i, system->getMasterName(i));
2278    }
2279
2280    replacements
2281        .name(name() + ".replacements")
2282        .desc("number of replacements")
2283        ;
2284}
2285
2286void
2287BaseCache::regProbePoints()
2288{
2289    ppHit = new ProbePointArg<PacketPtr>(this->getProbeManager(), "Hit");
2290    ppMiss = new ProbePointArg<PacketPtr>(this->getProbeManager(), "Miss");
2291    ppFill = new ProbePointArg<PacketPtr>(this->getProbeManager(), "Fill");
2292}
2293
2294///////////////
2295//
2296// CpuSidePort
2297//
2298///////////////
2299bool
2300BaseCache::CpuSidePort::recvTimingSnoopResp(PacketPtr pkt)
2301{
2302    // Snoops shouldn't happen when bypassing caches
2303    assert(!cache->system->bypassCaches());
2304
2305    assert(pkt->isResponse());
2306
2307    // Express snoop responses from master to slave, e.g., from L1 to L2
2308    cache->recvTimingSnoopResp(pkt);
2309    return true;
2310}
2311
2312
2313bool
2314BaseCache::CpuSidePort::tryTiming(PacketPtr pkt)
2315{
2316    if (cache->system->bypassCaches() || pkt->isExpressSnoop()) {
2317        // always let express snoop packets through even if blocked
2318        return true;
2319    } else if (blocked || mustSendRetry) {
2320        // either already committed to send a retry, or blocked
2321        mustSendRetry = true;
2322        return false;
2323    }
2324    mustSendRetry = false;
2325    return true;
2326}
2327
2328bool
2329BaseCache::CpuSidePort::recvTimingReq(PacketPtr pkt)
2330{
2331    assert(pkt->isRequest());
2332
2333    if (cache->system->bypassCaches()) {
2334        // Just forward the packet if caches are disabled.
2335        // @todo This should really enqueue the packet rather
2336        bool M5_VAR_USED success = cache->memSidePort.sendTimingReq(pkt);
2337        assert(success);
2338        return true;
2339    } else if (tryTiming(pkt)) {
2340        cache->recvTimingReq(pkt);
2341        return true;
2342    }
2343    return false;
2344}
2345
2346Tick
2347BaseCache::CpuSidePort::recvAtomic(PacketPtr pkt)
2348{
2349    if (cache->system->bypassCaches()) {
2350        // Forward the request if the system is in cache bypass mode.
2351        return cache->memSidePort.sendAtomic(pkt);
2352    } else {
2353        return cache->recvAtomic(pkt);
2354    }
2355}
2356
2357void
2358BaseCache::CpuSidePort::recvFunctional(PacketPtr pkt)
2359{
2360    if (cache->system->bypassCaches()) {
2361        // The cache should be flushed if we are in cache bypass mode,
2362        // so we don't need to check if we need to update anything.
2363        cache->memSidePort.sendFunctional(pkt);
2364        return;
2365    }
2366
2367    // functional request
2368    cache->functionalAccess(pkt, true);
2369}
2370
2371AddrRangeList
2372BaseCache::CpuSidePort::getAddrRanges() const
2373{
2374    return cache->getAddrRanges();
2375}
2376
2377
2378BaseCache::
2379CpuSidePort::CpuSidePort(const std::string &_name, BaseCache *_cache,
2380                         const std::string &_label)
2381    : CacheSlavePort(_name, _cache, _label), cache(_cache)
2382{
2383}
2384
2385///////////////
2386//
2387// MemSidePort
2388//
2389///////////////
2390bool
2391BaseCache::MemSidePort::recvTimingResp(PacketPtr pkt)
2392{
2393    cache->recvTimingResp(pkt);
2394    return true;
2395}
2396
2397// Express snooping requests to memside port
2398void
2399BaseCache::MemSidePort::recvTimingSnoopReq(PacketPtr pkt)
2400{
2401    // Snoops shouldn't happen when bypassing caches
2402    assert(!cache->system->bypassCaches());
2403
2404    // handle snooping requests
2405    cache->recvTimingSnoopReq(pkt);
2406}
2407
2408Tick
2409BaseCache::MemSidePort::recvAtomicSnoop(PacketPtr pkt)
2410{
2411    // Snoops shouldn't happen when bypassing caches
2412    assert(!cache->system->bypassCaches());
2413
2414    return cache->recvAtomicSnoop(pkt);
2415}
2416
2417void
2418BaseCache::MemSidePort::recvFunctionalSnoop(PacketPtr pkt)
2419{
2420    // Snoops shouldn't happen when bypassing caches
2421    assert(!cache->system->bypassCaches());
2422
2423    // functional snoop (note that in contrast to atomic we don't have
2424    // a specific functionalSnoop method, as they have the same
2425    // behaviour regardless)
2426    cache->functionalAccess(pkt, false);
2427}
2428
2429void
2430BaseCache::CacheReqPacketQueue::sendDeferredPacket()
2431{
2432    // sanity check
2433    assert(!waitingOnRetry);
2434
2435    // there should never be any deferred request packets in the
2436    // queue, instead we resly on the cache to provide the packets
2437    // from the MSHR queue or write queue
2438    assert(deferredPacketReadyTime() == MaxTick);
2439
2440    // check for request packets (requests & writebacks)
2441    QueueEntry* entry = cache.getNextQueueEntry();
2442
2443    if (!entry) {
2444        // can happen if e.g. we attempt a writeback and fail, but
2445        // before the retry, the writeback is eliminated because
2446        // we snoop another cache's ReadEx.
2447    } else {
2448        // let our snoop responses go first if there are responses to
2449        // the same addresses
2450        if (checkConflictingSnoop(entry->getTarget()->pkt)) {
2451            return;
2452        }
2453        waitingOnRetry = entry->sendPacket(cache);
2454    }
2455
2456    // if we succeeded and are not waiting for a retry, schedule the
2457    // next send considering when the next queue is ready, note that
2458    // snoop responses have their own packet queue and thus schedule
2459    // their own events
2460    if (!waitingOnRetry) {
2461        schedSendEvent(cache.nextQueueReadyTime());
2462    }
2463}
2464
2465BaseCache::MemSidePort::MemSidePort(const std::string &_name,
2466                                    BaseCache *_cache,
2467                                    const std::string &_label)
2468    : CacheMasterPort(_name, _cache, _reqQueue, _snoopRespQueue),
2469      _reqQueue(*_cache, *this, _snoopRespQueue, _label),
2470      _snoopRespQueue(*_cache, *this, true, _label), cache(_cache)
2471{
2472}
2473
2474void
2475WriteAllocator::updateMode(Addr write_addr, unsigned write_size,
2476                           Addr blk_addr)
2477{
2478    // check if we are continuing where the last write ended
2479    if (nextAddr == write_addr) {
2480        delayCtr[blk_addr] = delayThreshold;
2481        // stop if we have already saturated
2482        if (mode != WriteMode::NO_ALLOCATE) {
2483            byteCount += write_size;
2484            // switch to streaming mode if we have passed the lower
2485            // threshold
2486            if (mode == WriteMode::ALLOCATE &&
2487                byteCount > coalesceLimit) {
2488                mode = WriteMode::COALESCE;
2489                DPRINTF(Cache, "Switched to write coalescing\n");
2490            } else if (mode == WriteMode::COALESCE &&
2491                       byteCount > noAllocateLimit) {
2492                // and continue and switch to non-allocating mode if we
2493                // pass the upper threshold
2494                mode = WriteMode::NO_ALLOCATE;
2495                DPRINTF(Cache, "Switched to write-no-allocate\n");
2496            }
2497        }
2498    } else {
2499        // we did not see a write matching the previous one, start
2500        // over again
2501        byteCount = write_size;
2502        mode = WriteMode::ALLOCATE;
2503        resetDelay(blk_addr);
2504    }
2505    nextAddr = write_addr + write_size;
2506}
2507
2508WriteAllocator*
2509WriteAllocatorParams::create()
2510{
2511    return new WriteAllocator(this);
2512}
2513