Ethernet.py revision 11703:08b78e0a3717
1# Copyright (c) 2015 ARM Limited 2# All rights reserved. 3# 4# The license below extends only to copyright in the software and shall 5# not be construed as granting a license to any other intellectual 6# property including but not limited to intellectual property relating 7# to a hardware implementation of the functionality of the software 8# licensed hereunder. You may use the software subject to the license 9# terms below provided that you ensure that this notice is replicated 10# unmodified and in its entirety in all distributions of the software, 11# modified or unmodified, in source code or in binary form. 12# 13# Copyright (c) 2005-2007 The Regents of The University of Michigan 14# All rights reserved. 15# 16# Redistribution and use in source and binary forms, with or without 17# modification, are permitted provided that the following conditions are 18# met: redistributions of source code must retain the above copyright 19# notice, this list of conditions and the following disclaimer; 20# redistributions in binary form must reproduce the above copyright 21# notice, this list of conditions and the following disclaimer in the 22# documentation and/or other materials provided with the distribution; 23# neither the name of the copyright holders nor the names of its 24# contributors may be used to endorse or promote products derived from 25# this software without specific prior written permission. 26# 27# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 28# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 29# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 30# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 31# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 32# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 33# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 34# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 35# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 36# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 37# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 38# 39# Authors: Nathan Binkert 40 41from m5.SimObject import SimObject 42from m5.params import * 43from m5.proxy import * 44from PciDevice import PciDevice 45 46class EtherObject(SimObject): 47 type = 'EtherObject' 48 abstract = True 49 cxx_header = "dev/net/etherobject.hh" 50 51class EtherLink(EtherObject): 52 type = 'EtherLink' 53 cxx_header = "dev/net/etherlink.hh" 54 int0 = SlavePort("interface 0") 55 int1 = SlavePort("interface 1") 56 delay = Param.Latency('0us', "packet transmit delay") 57 delay_var = Param.Latency('0ns', "packet transmit delay variability") 58 speed = Param.NetworkBandwidth('1Gbps', "link speed") 59 dump = Param.EtherDump(NULL, "dump object") 60 61class DistEtherLink(EtherObject): 62 type = 'DistEtherLink' 63 cxx_header = "dev/net/dist_etherlink.hh" 64 int0 = SlavePort("interface 0") 65 delay = Param.Latency('0us', "packet transmit delay") 66 delay_var = Param.Latency('0ns', "packet transmit delay variability") 67 speed = Param.NetworkBandwidth('1Gbps', "link speed") 68 dump = Param.EtherDump(NULL, "dump object") 69 dist_rank = Param.UInt32('0', "Rank of this gem5 process (dist run)") 70 dist_size = Param.UInt32('1', "Number of gem5 processes (dist run)") 71 sync_start = Param.Latency('5200000000000t', "first dist sync barrier") 72 sync_repeat = Param.Latency('10us', "dist sync barrier repeat") 73 server_name = Param.String('localhost', "Message server name") 74 server_port = Param.UInt32('2200', "Message server port") 75 is_switch = Param.Bool(False, "true if this a link in etherswitch") 76 dist_sync_on_pseudo_op = Param.Bool(False, "Start sync with pseudo_op") 77 num_nodes = Param.UInt32('2', "Number of simulate nodes") 78 79class EtherBus(EtherObject): 80 type = 'EtherBus' 81 cxx_header = "dev/net/etherbus.hh" 82 loopback = Param.Bool(True, "send packet back to the sending interface") 83 dump = Param.EtherDump(NULL, "dump object") 84 speed = Param.NetworkBandwidth('100Mbps', "bus speed in bits per second") 85 86class EtherSwitch(EtherObject): 87 type = 'EtherSwitch' 88 cxx_header = "dev/net/etherswitch.hh" 89 dump = Param.EtherDump(NULL, "dump object") 90 fabric_speed = Param.NetworkBandwidth('10Gbps', "switch fabric speed in bits " 91 "per second") 92 interface = VectorMasterPort("Ethernet Interface") 93 output_buffer_size = Param.MemorySize('1MB', "size of output port buffers") 94 delay = Param.Latency('0us', "packet transmit delay") 95 delay_var = Param.Latency('0ns', "packet transmit delay variability") 96 time_to_live = Param.Latency('10ms', "time to live of MAC address maping") 97 98class EtherTap(EtherObject): 99 type = 'EtherTap' 100 cxx_header = "dev/net/ethertap.hh" 101 bufsz = Param.Int(10000, "tap buffer size") 102 dump = Param.EtherDump(NULL, "dump object") 103 port = Param.UInt16(3500, "tap port") 104 105class EtherDump(SimObject): 106 type = 'EtherDump' 107 cxx_header = "dev/net/etherdump.hh" 108 file = Param.String("dump file") 109 maxlen = Param.Int(96, "max portion of packet data to dump") 110 111class EtherDevice(PciDevice): 112 type = 'EtherDevice' 113 abstract = True 114 cxx_header = "dev/net/etherdevice.hh" 115 interface = MasterPort("Ethernet Interface") 116 117class IGbE(EtherDevice): 118 # Base class for two IGbE adapters listed above 119 type = 'IGbE' 120 cxx_header = "dev/net/i8254xGBe.hh" 121 hardware_address = Param.EthernetAddr(NextEthernetAddr, 122 "Ethernet Hardware Address") 123 rx_fifo_size = Param.MemorySize('384kB', "Size of the rx FIFO") 124 tx_fifo_size = Param.MemorySize('384kB', "Size of the tx FIFO") 125 rx_desc_cache_size = Param.Int(64, 126 "Number of enteries in the rx descriptor cache") 127 tx_desc_cache_size = Param.Int(64, 128 "Number of enteries in the rx descriptor cache") 129 VendorID = 0x8086 130 SubsystemID = 0x1008 131 SubsystemVendorID = 0x8086 132 Status = 0x0000 133 SubClassCode = 0x00 134 ClassCode = 0x02 135 ProgIF = 0x00 136 BAR0 = 0x00000000 137 BAR1 = 0x00000000 138 BAR2 = 0x00000000 139 BAR3 = 0x00000000 140 BAR4 = 0x00000000 141 BAR5 = 0x00000000 142 MaximumLatency = 0x00 143 MinimumGrant = 0xff 144 InterruptLine = 0x1e 145 InterruptPin = 0x01 146 BAR0Size = '128kB' 147 wb_delay = Param.Latency('10ns', "delay before desc writeback occurs") 148 fetch_delay = Param.Latency('10ns', "delay before desc fetch occurs") 149 fetch_comp_delay = Param.Latency('10ns', "delay after desc fetch occurs") 150 wb_comp_delay = Param.Latency('10ns', "delay after desc wb occurs") 151 tx_read_delay = Param.Latency('0ns', "delay after tx dma read") 152 rx_write_delay = Param.Latency('0ns', "delay after rx dma read") 153 phy_pid = Param.UInt16("Phy PID that corresponds to device ID") 154 phy_epid = Param.UInt16("Phy EPID that corresponds to device ID") 155 156class IGbE_e1000(IGbE): 157 # Older Intel 8254x based gigabit ethernet adapter 158 # Uses Intel e1000 driver 159 DeviceID = 0x1075 160 phy_pid = 0x02A8 161 phy_epid = 0x0380 162 163class IGbE_igb(IGbE): 164 # Newer Intel 8257x based gigabit ethernet adapter 165 # Uses Intel igb driver and in theory supports packet splitting and LRO 166 DeviceID = 0x10C9 167 phy_pid = 0x0141 168 phy_epid = 0x0CC0 169 170class EtherDevBase(EtherDevice): 171 type = 'EtherDevBase' 172 abstract = True 173 cxx_header = "dev/net/etherdevice.hh" 174 175 hardware_address = Param.EthernetAddr(NextEthernetAddr, 176 "Ethernet Hardware Address") 177 178 dma_read_delay = Param.Latency('0us', "fixed delay for dma reads") 179 dma_read_factor = Param.Latency('0us', "multiplier for dma reads") 180 dma_write_delay = Param.Latency('0us', "fixed delay for dma writes") 181 dma_write_factor = Param.Latency('0us', "multiplier for dma writes") 182 183 rx_delay = Param.Latency('1us', "Receive Delay") 184 tx_delay = Param.Latency('1us', "Transmit Delay") 185 rx_fifo_size = Param.MemorySize('512kB', "max size of rx fifo") 186 tx_fifo_size = Param.MemorySize('512kB', "max size of tx fifo") 187 188 rx_filter = Param.Bool(True, "Enable Receive Filter") 189 intr_delay = Param.Latency('10us', "Interrupt propagation delay") 190 rx_thread = Param.Bool(False, "dedicated kernel thread for transmit") 191 tx_thread = Param.Bool(False, "dedicated kernel threads for receive") 192 rss = Param.Bool(False, "Receive Side Scaling") 193 194class NSGigE(EtherDevBase): 195 type = 'NSGigE' 196 cxx_header = "dev/net/ns_gige.hh" 197 198 dma_data_free = Param.Bool(False, "DMA of Data is free") 199 dma_desc_free = Param.Bool(False, "DMA of Descriptors is free") 200 dma_no_allocate = Param.Bool(True, "Should we allocate cache on read") 201 202 VendorID = 0x100B 203 DeviceID = 0x0022 204 Status = 0x0290 205 SubClassCode = 0x00 206 ClassCode = 0x02 207 ProgIF = 0x00 208 BAR0 = 0x00000001 209 BAR1 = 0x00000000 210 BAR2 = 0x00000000 211 BAR3 = 0x00000000 212 BAR4 = 0x00000000 213 BAR5 = 0x00000000 214 MaximumLatency = 0x34 215 MinimumGrant = 0xb0 216 InterruptLine = 0x1e 217 InterruptPin = 0x01 218 BAR0Size = '256B' 219 BAR1Size = '4kB' 220 221 222 223class Sinic(EtherDevBase): 224 type = 'Sinic' 225 cxx_class = 'Sinic::Device' 226 cxx_header = "dev/net/sinic.hh" 227 228 rx_max_copy = Param.MemorySize('1514B', "rx max copy") 229 tx_max_copy = Param.MemorySize('16kB', "tx max copy") 230 rx_max_intr = Param.UInt32(10, "max rx packets per interrupt") 231 rx_fifo_threshold = Param.MemorySize('384kB', "rx fifo high threshold") 232 rx_fifo_low_mark = Param.MemorySize('128kB', "rx fifo low threshold") 233 tx_fifo_high_mark = Param.MemorySize('384kB', "tx fifo high threshold") 234 tx_fifo_threshold = Param.MemorySize('128kB', "tx fifo low threshold") 235 virtual_count = Param.UInt32(1, "Virtualized SINIC") 236 zero_copy_size = Param.UInt32(64, "Bytes to copy if below threshold") 237 zero_copy_threshold = Param.UInt32(256, 238 "Only zero copy above this threshold") 239 zero_copy = Param.Bool(False, "Zero copy receive") 240 delay_copy = Param.Bool(False, "Delayed copy transmit") 241 virtual_addr = Param.Bool(False, "Virtual addressing") 242 243 VendorID = 0x1291 244 DeviceID = 0x1293 245 Status = 0x0290 246 SubClassCode = 0x00 247 ClassCode = 0x02 248 ProgIF = 0x00 249 BAR0 = 0x00000000 250 BAR1 = 0x00000000 251 BAR2 = 0x00000000 252 BAR3 = 0x00000000 253 BAR4 = 0x00000000 254 BAR5 = 0x00000000 255 MaximumLatency = 0x34 256 MinimumGrant = 0xb0 257 InterruptLine = 0x1e 258 InterruptPin = 0x01 259 BAR0Size = '64kB' 260 261 262