iew_impl.hh revision 2316
1/* 2 * Copyright (c) 2004-2005 The Regents of The University of Michigan 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are 7 * met: redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer; 9 * redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution; 12 * neither the name of the copyright holders nor the names of its 13 * contributors may be used to endorse or promote products derived from 14 * this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29// @todo: Fix the instantaneous communication among all the stages within 30// iew. There's a clear delay between issue and execute, yet backwards 31// communication happens simultaneously. 32 33#include <queue> 34 35#include "base/timebuf.hh" 36#include "cpu/o3/fu_pool.hh" 37#include "cpu/o3/iew.hh" 38 39using namespace std; 40 41template<class Impl> 42DefaultIEW<Impl>::LdWritebackEvent::LdWritebackEvent(DynInstPtr &_inst, 43 DefaultIEW<Impl> *_iew) 44 : Event(&mainEventQueue), inst(_inst), iewStage(_iew) 45{ 46 this->setFlags(Event::AutoDelete); 47} 48 49template<class Impl> 50void 51DefaultIEW<Impl>::LdWritebackEvent::process() 52{ 53 DPRINTF(IEW, "Load writeback event [sn:%lli]\n", inst->seqNum); 54 DPRINTF(Activity, "Activity: Ld Writeback event [sn:%lli]\n", inst->seqNum); 55 56 //iewStage->ldstQueue.removeMSHR(inst->threadNumber,inst->seqNum); 57 58 if (iewStage->isSwitchedOut()) { 59 inst = NULL; 60 return; 61 } else if (inst->isSquashed()) { 62 iewStage->wakeCPU(); 63 inst = NULL; 64 return; 65 } 66 67 iewStage->wakeCPU(); 68 69 if (!inst->isExecuted()) { 70 inst->setExecuted(); 71 72 // Execute again to copy data to proper place. 73 if (inst->isStore()) { 74 inst->completeAcc(); 75 } 76 } 77 78 // Need to insert instruction into queue to commit 79 iewStage->instToCommit(inst); 80 81 //wroteToTimeBuffer = true; 82 iewStage->activityThisCycle(); 83 84 inst = NULL; 85} 86 87template<class Impl> 88const char * 89DefaultIEW<Impl>::LdWritebackEvent::description() 90{ 91 return "Load writeback event"; 92} 93 94template<class Impl> 95DefaultIEW<Impl>::DefaultIEW(Params *params) 96 : // Just make this time buffer really big for now 97 // @todo: Make this into a parameter. 98 issueToExecQueue(5, 5), 99 instQueue(params), 100 ldstQueue(params), 101 fuPool(params->fuPool), 102 commitToIEWDelay(params->commitToIEWDelay), 103 renameToIEWDelay(params->renameToIEWDelay), 104 issueToExecuteDelay(params->issueToExecuteDelay), 105 issueReadWidth(params->issueWidth), 106 issueWidth(params->issueWidth), 107 executeWidth(params->executeWidth), 108 numThreads(params->numberOfThreads), 109 switchedOut(false) 110{ 111 DPRINTF(IEW, "executeIntWidth: %i.\n", params->executeIntWidth); 112 _status = Active; 113 exeStatus = Running; 114 wbStatus = Idle; 115 116 // Setup wire to read instructions coming from issue. 117 fromIssue = issueToExecQueue.getWire(-issueToExecuteDelay); 118 119 // Instruction queue needs the queue between issue and execute. 120 instQueue.setIssueToExecuteQueue(&issueToExecQueue); 121 122 instQueue.setIEW(this); 123 ldstQueue.setIEW(this); 124 125 for (int i=0; i < numThreads; i++) { 126 dispatchStatus[i] = Running; 127 stalls[i].commit = false; 128 fetchRedirect[i] = false; 129 } 130 131 updateLSQNextCycle = false; 132 133 // @todo: Make into a parameter 134 skidBufferMax = (3 * (renameToIEWDelay * params->renameWidth)) + issueWidth; 135} 136 137template <class Impl> 138std::string 139DefaultIEW<Impl>::name() const 140{ 141 return cpu->name() + ".iew"; 142} 143 144template <class Impl> 145void 146DefaultIEW<Impl>::regStats() 147{ 148 using namespace Stats; 149 150 instQueue.regStats(); 151 152 //ldstQueue.regStats(); 153 154 iewIdleCycles 155 .name(name() + ".iewIdleCycles") 156 .desc("Number of cycles IEW is idle"); 157 158 iewSquashCycles 159 .name(name() + ".iewSquashCycles") 160 .desc("Number of cycles IEW is squashing"); 161 162 iewBlockCycles 163 .name(name() + ".iewBlockCycles") 164 .desc("Number of cycles IEW is blocking"); 165 166 iewUnblockCycles 167 .name(name() + ".iewUnblockCycles") 168 .desc("Number of cycles IEW is unblocking"); 169 170// iewWBInsts; 171 172 iewDispatchedInsts 173 .name(name() + ".iewDispatchedInsts") 174 .desc("Number of instructions dispatched to IQ"); 175 176 iewDispSquashedInsts 177 .name(name() + ".iewDispSquashedInsts") 178 .desc("Number of squashed instructions skipped by dispatch"); 179 180 iewDispLoadInsts 181 .name(name() + ".iewDispLoadInsts") 182 .desc("Number of dispatched load instructions"); 183 184 iewDispStoreInsts 185 .name(name() + ".iewDispStoreInsts") 186 .desc("Number of dispatched store instructions"); 187 188 iewDispNonSpecInsts 189 .name(name() + ".iewDispNonSpecInsts") 190 .desc("Number of dispatched non-speculative instructions"); 191 192 iewIQFullEvents 193 .name(name() + ".iewIQFullEvents") 194 .desc("Number of times the IQ has become full, causing a stall"); 195 196 iewLSQFullEvents 197 .name(name() + ".iewLSQFullEvents") 198 .desc("Number of times the LSQ has become full, causing a stall"); 199 200 iewExecutedInsts 201 .name(name() + ".iewExecutedInsts") 202 .desc("Number of executed instructions"); 203 204 iewExecLoadInsts 205 .init(cpu->number_of_threads) 206 .name(name() + ".iewExecLoadInsts") 207 .desc("Number of load instructions executed") 208 .flags(total); 209/* 210 iewExecStoreInsts 211 .name(name() + ".iewExecStoreInsts") 212 .desc("Number of store instructions executed"); 213*/ 214 iewExecSquashedInsts 215 .name(name() + ".iewExecSquashedInsts") 216 .desc("Number of squashed instructions skipped in execute"); 217 218 memOrderViolationEvents 219 .name(name() + ".memOrderViolationEvents") 220 .desc("Number of memory order violations"); 221 222 predictedTakenIncorrect 223 .name(name() + ".predictedTakenIncorrect") 224 .desc("Number of branches that were predicted taken incorrectly"); 225 226 predictedNotTakenIncorrect 227 .name(name() + ".predictedNotTakenIncorrect") 228 .desc("Number of branches that were predicted not taken incorrectly"); 229 230 branchMispredicts 231 .name(name() + ".branchMispredicts") 232 .desc("Number of branch mispredicts detected at execute"); 233 234 branchMispredicts = predictedTakenIncorrect + predictedNotTakenIncorrect; 235 236 exe_swp 237 .init(cpu->number_of_threads) 238 .name(name() + ".EXEC:swp") 239 .desc("number of swp insts executed") 240 .flags(total) 241 ; 242 243 exe_nop 244 .init(cpu->number_of_threads) 245 .name(name() + ".EXEC:nop") 246 .desc("number of nop insts executed") 247 .flags(total) 248 ; 249 250 exe_refs 251 .init(cpu->number_of_threads) 252 .name(name() + ".EXEC:refs") 253 .desc("number of memory reference insts executed") 254 .flags(total) 255 ; 256 257 exe_branches 258 .init(cpu->number_of_threads) 259 .name(name() + ".EXEC:branches") 260 .desc("Number of branches executed") 261 .flags(total) 262 ; 263 264 issue_rate 265 .name(name() + ".EXEC:rate") 266 .desc("Inst execution rate") 267 .flags(total) 268 ; 269 issue_rate = iewExecutedInsts / cpu->numCycles; 270 271 iewExecStoreInsts 272 .name(name() + ".EXEC:stores") 273 .desc("Number of stores executed") 274 .flags(total) 275 ; 276 iewExecStoreInsts = exe_refs - iewExecLoadInsts; 277/* 278 for (int i=0; i<Num_OpClasses; ++i) { 279 stringstream subname; 280 subname << opClassStrings[i] << "_delay"; 281 issue_delay_dist.subname(i, subname.str()); 282 } 283*/ 284 // 285 // Other stats 286 // 287 288 iewInstsToCommit 289 .init(cpu->number_of_threads) 290 .name(name() + ".WB:sent") 291 .desc("cumulative count of insts sent to commit") 292 .flags(total) 293 ; 294 295 writeback_count 296 .init(cpu->number_of_threads) 297 .name(name() + ".WB:count") 298 .desc("cumulative count of insts written-back") 299 .flags(total) 300 ; 301 302 producer_inst 303 .init(cpu->number_of_threads) 304 .name(name() + ".WB:producers") 305 .desc("num instructions producing a value") 306 .flags(total) 307 ; 308 309 consumer_inst 310 .init(cpu->number_of_threads) 311 .name(name() + ".WB:consumers") 312 .desc("num instructions consuming a value") 313 .flags(total) 314 ; 315 316 wb_penalized 317 .init(cpu->number_of_threads) 318 .name(name() + ".WB:penalized") 319 .desc("number of instrctions required to write to 'other' IQ") 320 .flags(total) 321 ; 322 323 wb_penalized_rate 324 .name(name() + ".WB:penalized_rate") 325 .desc ("fraction of instructions written-back that wrote to 'other' IQ") 326 .flags(total) 327 ; 328 329 wb_penalized_rate = wb_penalized / writeback_count; 330 331 wb_fanout 332 .name(name() + ".WB:fanout") 333 .desc("average fanout of values written-back") 334 .flags(total) 335 ; 336 337 wb_fanout = producer_inst / consumer_inst; 338 339 wb_rate 340 .name(name() + ".WB:rate") 341 .desc("insts written-back per cycle") 342 .flags(total) 343 ; 344 wb_rate = writeback_count / cpu->numCycles; 345} 346 347template<class Impl> 348void 349DefaultIEW<Impl>::initStage() 350{ 351 for (int tid=0; tid < numThreads; tid++) { 352 toRename->iewInfo[tid].usedIQ = true; 353 toRename->iewInfo[tid].freeIQEntries = 354 instQueue.numFreeEntries(tid); 355 356 toRename->iewInfo[tid].usedLSQ = true; 357 toRename->iewInfo[tid].freeLSQEntries = 358 ldstQueue.numFreeEntries(tid); 359 } 360} 361 362template<class Impl> 363void 364DefaultIEW<Impl>::setCPU(FullCPU *cpu_ptr) 365{ 366 DPRINTF(IEW, "Setting CPU pointer.\n"); 367 cpu = cpu_ptr; 368 369 instQueue.setCPU(cpu_ptr); 370 ldstQueue.setCPU(cpu_ptr); 371 372 cpu->activateStage(FullCPU::IEWIdx); 373} 374 375template<class Impl> 376void 377DefaultIEW<Impl>::setTimeBuffer(TimeBuffer<TimeStruct> *tb_ptr) 378{ 379 DPRINTF(IEW, "Setting time buffer pointer.\n"); 380 timeBuffer = tb_ptr; 381 382 // Setup wire to read information from time buffer, from commit. 383 fromCommit = timeBuffer->getWire(-commitToIEWDelay); 384 385 // Setup wire to write information back to previous stages. 386 toRename = timeBuffer->getWire(0); 387 388 toFetch = timeBuffer->getWire(0); 389 390 // Instruction queue also needs main time buffer. 391 instQueue.setTimeBuffer(tb_ptr); 392} 393 394template<class Impl> 395void 396DefaultIEW<Impl>::setRenameQueue(TimeBuffer<RenameStruct> *rq_ptr) 397{ 398 DPRINTF(IEW, "Setting rename queue pointer.\n"); 399 renameQueue = rq_ptr; 400 401 // Setup wire to read information from rename queue. 402 fromRename = renameQueue->getWire(-renameToIEWDelay); 403} 404 405template<class Impl> 406void 407DefaultIEW<Impl>::setIEWQueue(TimeBuffer<IEWStruct> *iq_ptr) 408{ 409 DPRINTF(IEW, "Setting IEW queue pointer.\n"); 410 iewQueue = iq_ptr; 411 412 // Setup wire to write instructions to commit. 413 toCommit = iewQueue->getWire(0); 414} 415 416template<class Impl> 417void 418DefaultIEW<Impl>::setActiveThreads(list<unsigned> *at_ptr) 419{ 420 DPRINTF(IEW, "Setting active threads list pointer.\n"); 421 activeThreads = at_ptr; 422 423 ldstQueue.setActiveThreads(at_ptr); 424 instQueue.setActiveThreads(at_ptr); 425} 426 427template<class Impl> 428void 429DefaultIEW<Impl>::setScoreboard(Scoreboard *sb_ptr) 430{ 431 DPRINTF(IEW, "Setting scoreboard pointer.\n"); 432 scoreboard = sb_ptr; 433} 434 435#if 0 436template<class Impl> 437void 438DefaultIEW<Impl>::setPageTable(PageTable *pt_ptr) 439{ 440 ldstQueue.setPageTable(pt_ptr); 441} 442#endif 443 444template <class Impl> 445void 446DefaultIEW<Impl>::switchOut() 447{ 448 cpu->signalSwitched(); 449} 450 451template <class Impl> 452void 453DefaultIEW<Impl>::doSwitchOut() 454{ 455 switchedOut = true; 456 457 instQueue.switchOut(); 458 ldstQueue.switchOut(); 459 fuPool->switchOut(); 460 461 for (int i = 0; i < numThreads; i++) { 462 while (!insts[i].empty()) 463 insts[i].pop(); 464 while (!skidBuffer[i].empty()) 465 skidBuffer[i].pop(); 466 } 467} 468 469template <class Impl> 470void 471DefaultIEW<Impl>::takeOverFrom() 472{ 473 _status = Active; 474 exeStatus = Running; 475 wbStatus = Idle; 476 switchedOut = false; 477 478 instQueue.takeOverFrom(); 479 ldstQueue.takeOverFrom(); 480 fuPool->takeOverFrom(); 481 482 initStage(); 483 cpu->activityThisCycle(); 484 485 for (int i=0; i < numThreads; i++) { 486 dispatchStatus[i] = Running; 487 stalls[i].commit = false; 488 fetchRedirect[i] = false; 489 } 490 491 updateLSQNextCycle = false; 492 493 // @todo: Fix hardcoded number 494 for (int i = 0; i < 6; ++i) { 495 issueToExecQueue.advance(); 496 } 497} 498 499template<class Impl> 500void 501DefaultIEW<Impl>::squash(unsigned tid) 502{ 503 DPRINTF(IEW, "[tid:%i]: Squashing all instructions.\n", 504 tid); 505 506 // Tell the IQ to start squashing. 507 instQueue.squash(tid); 508 509 // Tell the LDSTQ to start squashing. 510 ldstQueue.squash(fromCommit->commitInfo[tid].doneSeqNum,tid); 511 512 updatedQueues = true; 513 514 // Clear the skid buffer in case it has any data in it. 515 while (!skidBuffer[tid].empty()) { 516 517 if (skidBuffer[tid].front()->isLoad() || 518 skidBuffer[tid].front()->isStore() ) { 519 toRename->iewInfo[tid].dispatchedToLSQ++; 520 } 521 522 toRename->iewInfo[tid].dispatched++; 523 524 skidBuffer[tid].pop(); 525 } 526 527 while (!insts[tid].empty()) { 528 if (insts[tid].front()->isLoad() || 529 insts[tid].front()->isStore() ) { 530 toRename->iewInfo[tid].dispatchedToLSQ++; 531 } 532 533 toRename->iewInfo[tid].dispatched++; 534 535 insts[tid].pop(); 536 } 537} 538 539template<class Impl> 540void 541DefaultIEW<Impl>::squashDueToBranch(DynInstPtr &inst, unsigned tid) 542{ 543 DPRINTF(IEW, "[tid:%i]: Squashing from a specific instruction, PC: %#x " 544 "[sn:%i].\n", tid, inst->readPC(), inst->seqNum); 545 546 // Tell rename to squash through the time buffer. 547 toCommit->squash[tid] = true; 548 toCommit->squashedSeqNum[tid] = inst->seqNum; 549 toCommit->mispredPC[tid] = inst->readPC(); 550 toCommit->nextPC[tid] = inst->readNextPC(); 551 toCommit->branchMispredict[tid] = true; 552 // Prediction was incorrect, so send back inverse. 553 toCommit->branchTaken[tid] = inst->readNextPC() != 554 (inst->readPC() + sizeof(TheISA::MachInst)); 555 556 toCommit->includeSquashInst[tid] = false; 557 //toCommit->iewSquashNum[tid] = inst->seqNum; 558 559 wroteToTimeBuffer = true; 560} 561 562template<class Impl> 563void 564DefaultIEW<Impl>::squashDueToMemOrder(DynInstPtr &inst, unsigned tid) 565{ 566 DPRINTF(IEW, "[tid:%i]: Squashing from a specific instruction, " 567 "PC: %#x [sn:%i].\n", tid, inst->readPC(), inst->seqNum); 568 569 // Tell rename to squash through the time buffer. 570 toCommit->squash[tid] = true; 571 toCommit->squashedSeqNum[tid] = inst->seqNum; 572 toCommit->nextPC[tid] = inst->readNextPC(); 573 574 toCommit->includeSquashInst[tid] = false; 575 //toCommit->iewSquashNum[tid] = inst->seqNum; 576 577 wroteToTimeBuffer = true; 578} 579 580template<class Impl> 581void 582DefaultIEW<Impl>::squashDueToMemBlocked(DynInstPtr &inst, unsigned tid) 583{ 584 DPRINTF(IEW, "[tid:%i]: Memory blocked, squashing load and younger insts, " 585 "PC: %#x [sn:%i].\n", tid, inst->readPC(), inst->seqNum); 586 587 toCommit->squash[tid] = true; 588 toCommit->squashedSeqNum[tid] = inst->seqNum; 589 toCommit->nextPC[tid] = inst->readPC(); 590 591 toCommit->includeSquashInst[tid] = true; 592 593 ldstQueue.setLoadBlockedHandled(tid); 594 595 wroteToTimeBuffer = true; 596} 597 598template<class Impl> 599void 600DefaultIEW<Impl>::block(unsigned tid) 601{ 602 DPRINTF(IEW, "[tid:%u]: Blocking.\n", tid); 603 604 if (dispatchStatus[tid] != Blocked && 605 dispatchStatus[tid] != Unblocking) { 606 toRename->iewBlock[tid] = true; 607 wroteToTimeBuffer = true; 608 } 609 610 // Add the current inputs to the skid buffer so they can be 611 // reprocessed when this stage unblocks. 612 skidInsert(tid); 613 614 // Set the status to Blocked. 615 dispatchStatus[tid] = Blocked; 616} 617 618template<class Impl> 619void 620DefaultIEW<Impl>::unblock(unsigned tid) 621{ 622 DPRINTF(IEW, "[tid:%i]: Reading instructions out of the skid " 623 "buffer %u.\n",tid, tid); 624 625 // If the skid bufffer is empty, signal back to previous stages to unblock. 626 // Also switch status to running. 627 if (skidBuffer[tid].empty()) { 628 toRename->iewUnblock[tid] = true; 629 wroteToTimeBuffer = true; 630 DPRINTF(IEW, "[tid:%i]: Done unblocking.\n",tid); 631 dispatchStatus[tid] = Running; 632 } 633} 634 635template<class Impl> 636void 637DefaultIEW<Impl>::wakeDependents(DynInstPtr &inst) 638{ 639 instQueue.wakeDependents(inst); 640} 641 642template<class Impl> 643void 644DefaultIEW<Impl>::rescheduleMemInst(DynInstPtr &inst) 645{ 646 instQueue.rescheduleMemInst(inst); 647} 648 649template<class Impl> 650void 651DefaultIEW<Impl>::replayMemInst(DynInstPtr &inst) 652{ 653 instQueue.replayMemInst(inst); 654} 655 656template<class Impl> 657void 658DefaultIEW<Impl>::instToCommit(DynInstPtr &inst) 659{ 660 // First check the time slot that this instruction will write 661 // to. If there are free write ports at the time, then go ahead 662 // and write the instruction to that time. If there are not, 663 // keep looking back to see where's the first time there's a 664 // free slot. What happens if you run out of free spaces? 665 // For now naively assume that all instructions take one cycle. 666 // Otherwise would have to look into the time buffer based on the 667 // latency of the instruction. 668 while ((*iewQueue)[wbCycle].insts[wbNumInst]) { 669 ++wbNumInst; 670 if (wbNumInst == issueWidth) { 671 ++wbCycle; 672 wbNumInst = 0; 673 } 674 675 assert(wbCycle < 5); 676 } 677 678 // Add finished instruction to queue to commit. 679 (*iewQueue)[wbCycle].insts[wbNumInst] = inst; 680 (*iewQueue)[wbCycle].size++; 681} 682 683template <class Impl> 684unsigned 685DefaultIEW<Impl>::validInstsFromRename() 686{ 687 unsigned inst_count = 0; 688 689 for (int i=0; i<fromRename->size; i++) { 690 if (!fromRename->insts[i]->squashed) 691 inst_count++; 692 } 693 694 return inst_count; 695} 696 697template<class Impl> 698void 699DefaultIEW<Impl>::skidInsert(unsigned tid) 700{ 701 DynInstPtr inst = NULL; 702 703 while (!insts[tid].empty()) { 704 inst = insts[tid].front(); 705 706 insts[tid].pop(); 707 708 DPRINTF(Decode,"[tid:%i]: Inserting [sn:%lli] PC:%#x into " 709 "dispatch skidBuffer %i\n",tid, inst->seqNum, 710 inst->readPC(),tid); 711 712 skidBuffer[tid].push(inst); 713 } 714 715 assert(skidBuffer[tid].size() <= skidBufferMax && 716 "Skidbuffer Exceeded Max Size"); 717} 718 719template<class Impl> 720int 721DefaultIEW<Impl>::skidCount() 722{ 723 int max=0; 724 725 list<unsigned>::iterator threads = (*activeThreads).begin(); 726 727 while (threads != (*activeThreads).end()) { 728 unsigned thread_count = skidBuffer[*threads++].size(); 729 if (max < thread_count) 730 max = thread_count; 731 } 732 733 return max; 734} 735 736template<class Impl> 737bool 738DefaultIEW<Impl>::skidsEmpty() 739{ 740 list<unsigned>::iterator threads = (*activeThreads).begin(); 741 742 while (threads != (*activeThreads).end()) { 743 if (!skidBuffer[*threads++].empty()) 744 return false; 745 } 746 747 return true; 748} 749 750template <class Impl> 751void 752DefaultIEW<Impl>::updateStatus() 753{ 754 bool any_unblocking = false; 755 756 list<unsigned>::iterator threads = (*activeThreads).begin(); 757 758 threads = (*activeThreads).begin(); 759 760 while (threads != (*activeThreads).end()) { 761 unsigned tid = *threads++; 762 763 if (dispatchStatus[tid] == Unblocking) { 764 any_unblocking = true; 765 break; 766 } 767 } 768 769 // If there are no ready instructions waiting to be scheduled by the IQ, 770 // and there's no stores waiting to write back, and dispatch is not 771 // unblocking, then there is no internal activity for the IEW stage. 772 if (_status == Active && !instQueue.hasReadyInsts() && 773 !ldstQueue.willWB() && !any_unblocking) { 774 DPRINTF(IEW, "IEW switching to idle\n"); 775 776 deactivateStage(); 777 778 _status = Inactive; 779 } else if (_status == Inactive && (instQueue.hasReadyInsts() || 780 ldstQueue.willWB() || 781 any_unblocking)) { 782 // Otherwise there is internal activity. Set to active. 783 DPRINTF(IEW, "IEW switching to active\n"); 784 785 activateStage(); 786 787 _status = Active; 788 } 789} 790 791template <class Impl> 792void 793DefaultIEW<Impl>::resetEntries() 794{ 795 instQueue.resetEntries(); 796 ldstQueue.resetEntries(); 797} 798 799template <class Impl> 800void 801DefaultIEW<Impl>::readStallSignals(unsigned tid) 802{ 803 if (fromCommit->commitBlock[tid]) { 804 stalls[tid].commit = true; 805 } 806 807 if (fromCommit->commitUnblock[tid]) { 808 assert(stalls[tid].commit); 809 stalls[tid].commit = false; 810 } 811} 812 813template <class Impl> 814bool 815DefaultIEW<Impl>::checkStall(unsigned tid) 816{ 817 bool ret_val(false); 818 819 if (stalls[tid].commit) { 820 DPRINTF(IEW,"[tid:%i]: Stall from Commit stage detected.\n",tid); 821 ret_val = true; 822 } else if (instQueue.isFull(tid)) { 823 DPRINTF(IEW,"[tid:%i]: Stall: IQ is full.\n",tid); 824 ret_val = true; 825 } else if (ldstQueue.isFull(tid)) { 826 DPRINTF(IEW,"[tid:%i]: Stall: LSQ is full\n",tid); 827 828 if (ldstQueue.numLoads(tid) > 0 ) { 829 830 DPRINTF(IEW,"[tid:%i]: LSQ oldest load: [sn:%i] \n", 831 tid,ldstQueue.getLoadHeadSeqNum(tid)); 832 } 833 834 if (ldstQueue.numStores(tid) > 0) { 835 836 DPRINTF(IEW,"[tid:%i]: LSQ oldest store: [sn:%i] \n", 837 tid,ldstQueue.getStoreHeadSeqNum(tid)); 838 } 839 840 ret_val = true; 841 } else if (ldstQueue.isStalled(tid)) { 842 DPRINTF(IEW,"[tid:%i]: Stall: LSQ stall detected.\n",tid); 843 ret_val = true; 844 } 845 846 return ret_val; 847} 848 849template <class Impl> 850void 851DefaultIEW<Impl>::checkSignalsAndUpdate(unsigned tid) 852{ 853 // Check if there's a squash signal, squash if there is 854 // Check stall signals, block if there is. 855 // If status was Blocked 856 // if so then go to unblocking 857 // If status was Squashing 858 // check if squashing is not high. Switch to running this cycle. 859 860 readStallSignals(tid); 861 862 if (fromCommit->commitInfo[tid].squash) { 863 squash(tid); 864 865 if (dispatchStatus[tid] == Blocked || 866 dispatchStatus[tid] == Unblocking) { 867 toRename->iewUnblock[tid] = true; 868 wroteToTimeBuffer = true; 869 } 870 871 dispatchStatus[tid] = Squashing; 872 873 fetchRedirect[tid] = false; 874 return; 875 } 876 877 if (fromCommit->commitInfo[tid].robSquashing) { 878 DPRINTF(IEW, "[tid:%i]: ROB is still squashing.\n"); 879 880 dispatchStatus[tid] = Squashing; 881 882 return; 883 } 884 885 if (checkStall(tid)) { 886 block(tid); 887 dispatchStatus[tid] = Blocked; 888 return; 889 } 890 891 if (dispatchStatus[tid] == Blocked) { 892 // Status from previous cycle was blocked, but there are no more stall 893 // conditions. Switch over to unblocking. 894 DPRINTF(IEW, "[tid:%i]: Done blocking, switching to unblocking.\n", 895 tid); 896 897 dispatchStatus[tid] = Unblocking; 898 899 unblock(tid); 900 901 return; 902 } 903 904 if (dispatchStatus[tid] == Squashing) { 905 // Switch status to running if rename isn't being told to block or 906 // squash this cycle. 907 DPRINTF(IEW, "[tid:%i]: Done squashing, switching to running.\n", 908 tid); 909 910 dispatchStatus[tid] = Running; 911 912 return; 913 } 914} 915 916template <class Impl> 917void 918DefaultIEW<Impl>::sortInsts() 919{ 920 int insts_from_rename = fromRename->size; 921 922 for (int i = 0; i < numThreads; i++) 923 assert(insts[i].empty()); 924 925 for (int i = 0; i < insts_from_rename; ++i) { 926 insts[fromRename->insts[i]->threadNumber].push(fromRename->insts[i]); 927 } 928} 929 930template <class Impl> 931void 932DefaultIEW<Impl>::wakeCPU() 933{ 934 cpu->wakeCPU(); 935} 936 937template <class Impl> 938void 939DefaultIEW<Impl>::activityThisCycle() 940{ 941 DPRINTF(Activity, "Activity this cycle.\n"); 942 cpu->activityThisCycle(); 943} 944 945template <class Impl> 946inline void 947DefaultIEW<Impl>::activateStage() 948{ 949 DPRINTF(Activity, "Activating stage.\n"); 950 cpu->activateStage(FullCPU::IEWIdx); 951} 952 953template <class Impl> 954inline void 955DefaultIEW<Impl>::deactivateStage() 956{ 957 DPRINTF(Activity, "Deactivating stage.\n"); 958 cpu->deactivateStage(FullCPU::IEWIdx); 959} 960 961template<class Impl> 962void 963DefaultIEW<Impl>::dispatch(unsigned tid) 964{ 965 // If status is Running or idle, 966 // call dispatchInsts() 967 // If status is Unblocking, 968 // buffer any instructions coming from rename 969 // continue trying to empty skid buffer 970 // check if stall conditions have passed 971 972 if (dispatchStatus[tid] == Blocked) { 973 ++iewBlockCycles; 974 975 } else if (dispatchStatus[tid] == Squashing) { 976 ++iewSquashCycles; 977 } 978 979 // Dispatch should try to dispatch as many instructions as its bandwidth 980 // will allow, as long as it is not currently blocked. 981 if (dispatchStatus[tid] == Running || 982 dispatchStatus[tid] == Idle) { 983 DPRINTF(IEW, "[tid:%i] Not blocked, so attempting to run " 984 "dispatch.\n", tid); 985 986 dispatchInsts(tid); 987 } else if (dispatchStatus[tid] == Unblocking) { 988 // Make sure that the skid buffer has something in it if the 989 // status is unblocking. 990 assert(!skidsEmpty()); 991 992 // If the status was unblocking, then instructions from the skid 993 // buffer were used. Remove those instructions and handle 994 // the rest of unblocking. 995 dispatchInsts(tid); 996 997 ++iewUnblockCycles; 998 999 if (validInstsFromRename() && dispatchedAllInsts) { 1000 // Add the current inputs to the skid buffer so they can be 1001 // reprocessed when this stage unblocks. 1002 skidInsert(tid); 1003 } 1004 1005 unblock(tid); 1006 } 1007} 1008 1009template <class Impl> 1010void 1011DefaultIEW<Impl>::dispatchInsts(unsigned tid) 1012{ 1013 dispatchedAllInsts = true; 1014 1015 // Obtain instructions from skid buffer if unblocking, or queue from rename 1016 // otherwise. 1017 std::queue<DynInstPtr> &insts_to_dispatch = 1018 dispatchStatus[tid] == Unblocking ? 1019 skidBuffer[tid] : insts[tid]; 1020 1021 int insts_to_add = insts_to_dispatch.size(); 1022 1023 DynInstPtr inst; 1024 bool add_to_iq = false; 1025 int dis_num_inst = 0; 1026 1027 // Loop through the instructions, putting them in the instruction 1028 // queue. 1029 for ( ; dis_num_inst < insts_to_add && 1030 dis_num_inst < issueReadWidth; 1031 ++dis_num_inst) 1032 { 1033 inst = insts_to_dispatch.front(); 1034 1035 if (dispatchStatus[tid] == Unblocking) { 1036 DPRINTF(IEW, "[tid:%i]: Issue: Examining instruction from skid " 1037 "buffer\n", tid); 1038 } 1039 1040 // Make sure there's a valid instruction there. 1041 assert(inst); 1042 1043 DPRINTF(IEW, "[tid:%i]: Issue: Adding PC %#x [sn:%lli] [tid:%i] to " 1044 "IQ.\n", 1045 tid, inst->readPC(), inst->seqNum, inst->threadNumber); 1046 1047 // Be sure to mark these instructions as ready so that the 1048 // commit stage can go ahead and execute them, and mark 1049 // them as issued so the IQ doesn't reprocess them. 1050 // ------------- 1051 // @TODO: What happens if the ldstqueue is full? 1052 // Do we process the other instructions? 1053 1054 // Check for squashed instructions. 1055 if (inst->isSquashed()) { 1056 DPRINTF(IEW, "[tid:%i]: Issue: Squashed instruction encountered, " 1057 "not adding to IQ.\n", tid); 1058 1059 ++iewDispSquashedInsts; 1060 1061 insts_to_dispatch.pop(); 1062 1063 //Tell Rename That An Instruction has been processed 1064 if (inst->isLoad() || inst->isStore()) { 1065 toRename->iewInfo[tid].dispatchedToLSQ++; 1066 } 1067 toRename->iewInfo[tid].dispatched++; 1068 1069 continue; 1070 } 1071 1072 // Check for full conditions. 1073 if (instQueue.isFull(tid)) { 1074 DPRINTF(IEW, "[tid:%i]: Issue: IQ has become full.\n", tid); 1075 1076 // Call function to start blocking. 1077 block(tid); 1078 1079 // Set unblock to false. Special case where we are using 1080 // skidbuffer (unblocking) instructions but then we still 1081 // get full in the IQ. 1082 toRename->iewUnblock[tid] = false; 1083 1084 dispatchedAllInsts = false; 1085 1086 ++iewIQFullEvents; 1087 break; 1088 } else if (ldstQueue.isFull(tid)) { 1089 DPRINTF(IEW, "[tid:%i]: Issue: LSQ has become full.\n",tid); 1090 1091 // Call function to start blocking. 1092 block(tid); 1093 1094 // Set unblock to false. Special case where we are using 1095 // skidbuffer (unblocking) instructions but then we still 1096 // get full in the IQ. 1097 toRename->iewUnblock[tid] = false; 1098 1099 dispatchedAllInsts = false; 1100 1101 ++iewLSQFullEvents; 1102 break; 1103 } 1104 1105 // Otherwise issue the instruction just fine. 1106 if (inst->isLoad()) { 1107 DPRINTF(IEW, "[tid:%i]: Issue: Memory instruction " 1108 "encountered, adding to LSQ.\n", tid); 1109 1110 // Reserve a spot in the load store queue for this 1111 // memory access. 1112 ldstQueue.insertLoad(inst); 1113 1114 ++iewDispLoadInsts; 1115 1116 add_to_iq = true; 1117 1118 toRename->iewInfo[tid].dispatchedToLSQ++; 1119 } else if (inst->isStore()) { 1120 DPRINTF(IEW, "[tid:%i]: Issue: Memory instruction " 1121 "encountered, adding to LSQ.\n", tid); 1122 1123 ldstQueue.insertStore(inst); 1124 1125 ++iewDispStoreInsts; 1126 1127 if (inst->isNonSpeculative()) { 1128 inst->setCanCommit(); 1129 instQueue.insertNonSpec(inst); 1130 add_to_iq = false; 1131 1132 ++iewDispNonSpecInsts; 1133 } else { 1134 add_to_iq = true; 1135 } 1136 1137 toRename->iewInfo[tid].dispatchedToLSQ++; 1138#if FULL_SYSTEM 1139 } else if (inst->isMemBarrier() || inst->isWriteBarrier()) { 1140 inst->setCanCommit(); 1141 instQueue.insertBarrier(inst); 1142 add_to_iq = false; 1143#endif 1144 } else if (inst->isNonSpeculative()) { 1145 DPRINTF(IEW, "[tid:%i]: Issue: Nonspeculative instruction " 1146 "encountered, skipping.\n", tid); 1147 1148 // Same hack as with stores. 1149 inst->setCanCommit(); 1150 1151 // Specifically insert it as nonspeculative. 1152 instQueue.insertNonSpec(inst); 1153 1154 ++iewDispNonSpecInsts; 1155 1156 add_to_iq = false; 1157 } else if (inst->isNop()) { 1158 DPRINTF(IEW, "[tid:%i]: Issue: Nop instruction encountered, " 1159 "skipping.\n", tid); 1160 1161 inst->setIssued(); 1162 inst->setExecuted(); 1163 inst->setCanCommit(); 1164 1165 instQueue.advanceTail(inst); 1166 1167 exe_nop[tid]++; 1168 1169 add_to_iq = false; 1170 } else if (inst->isExecuted()) { 1171 assert(0 && "Instruction shouldn't be executed.\n"); 1172 DPRINTF(IEW, "Issue: Executed branch encountered, " 1173 "skipping.\n"); 1174 1175 inst->setIssued(); 1176 inst->setCanCommit(); 1177 1178 instQueue.advanceTail(inst); 1179 1180 add_to_iq = false; 1181 } else { 1182 add_to_iq = true; 1183 } 1184 1185 // If the instruction queue is not full, then add the 1186 // instruction. 1187 if (add_to_iq) { 1188 instQueue.insert(inst); 1189 } 1190 1191 insts_to_dispatch.pop(); 1192 1193 toRename->iewInfo[tid].dispatched++; 1194 1195 ++iewDispatchedInsts; 1196 } 1197 1198 if (!insts_to_dispatch.empty()) { 1199 DPRINTF(IEW,"[tid:%i]: Issue: Bandwidth Full. Blocking.\n"); 1200 block(tid); 1201 toRename->iewUnblock[tid] = false; 1202 } 1203 1204 if (dispatchStatus[tid] == Idle && dis_num_inst) { 1205 dispatchStatus[tid] = Running; 1206 1207 updatedQueues = true; 1208 } 1209 1210 dis_num_inst = 0; 1211} 1212 1213template <class Impl> 1214void 1215DefaultIEW<Impl>::printAvailableInsts() 1216{ 1217 int inst = 0; 1218 1219 cout << "Available Instructions: "; 1220 1221 while (fromIssue->insts[inst]) { 1222 1223 if (inst%3==0) cout << "\n\t"; 1224 1225 cout << "PC: " << fromIssue->insts[inst]->readPC() 1226 << " TN: " << fromIssue->insts[inst]->threadNumber 1227 << " SN: " << fromIssue->insts[inst]->seqNum << " | "; 1228 1229 inst++; 1230 1231 } 1232 1233 cout << "\n"; 1234} 1235 1236template <class Impl> 1237void 1238DefaultIEW<Impl>::executeInsts() 1239{ 1240 //bool fetch_redirect[(*activeThreads).size()]; 1241 wbNumInst = 0; 1242 wbCycle = 0; 1243 1244 list<unsigned>::iterator threads = (*activeThreads).begin(); 1245 1246 while (threads != (*activeThreads).end()) { 1247 unsigned tid = *threads++; 1248 fetchRedirect[tid] = false; 1249 } 1250 1251#if 0 1252 printAvailableInsts(); 1253#endif 1254 1255 // Execute/writeback any instructions that are available. 1256 int inst_num = 0; 1257 for ( ; inst_num < issueWidth && /* Haven't exceeded issue bandwidth */ 1258 fromIssue->insts[inst_num]; 1259 ++inst_num) { 1260 1261 DPRINTF(IEW, "Execute: Executing instructions from IQ.\n"); 1262 1263 // Get instruction from issue's queue. 1264 DynInstPtr inst = fromIssue->insts[inst_num]; 1265 1266 DPRINTF(IEW, "Execute: Processing PC %#x, [tid:%i] [sn:%i].\n", 1267 inst->readPC(), inst->threadNumber,inst->seqNum); 1268 1269 // Check if the instruction is squashed; if so then skip it 1270 // and don't count it towards the FU usage. 1271 if (inst->isSquashed()) { 1272 DPRINTF(IEW, "Execute: Instruction was squashed.\n"); 1273 1274 // Consider this instruction executed so that commit can go 1275 // ahead and retire the instruction. 1276 inst->setExecuted(); 1277 1278 // Not sure if I should set this here or just let commit try to 1279 // commit any squashed instructions. I like the latter a bit more. 1280 inst->setCanCommit(); 1281 1282 ++iewExecSquashedInsts; 1283 1284 continue; 1285 } 1286 1287 Fault fault = NoFault; 1288 1289 // Execute instruction. 1290 // Note that if the instruction faults, it will be handled 1291 // at the commit stage. 1292 if (inst->isMemRef() && 1293 (!inst->isDataPrefetch() && !inst->isInstPrefetch())) { 1294 DPRINTF(IEW, "Execute: Calculating address for memory " 1295 "reference.\n"); 1296 1297 // Tell the LDSTQ to execute this instruction (if it is a load). 1298 if (inst->isLoad()) { 1299 // Loads will mark themselves as executed, and their writeback 1300 // event adds the instruction to the queue to commit 1301 fault = ldstQueue.executeLoad(inst); 1302 1303// ++iewExecLoadInsts; 1304 } else if (inst->isStore()) { 1305 ldstQueue.executeStore(inst); 1306 1307// ++iewExecStoreInsts; 1308 1309 // If the store had a fault then it may not have a mem req 1310 if (inst->req && !(inst->req->flags & LOCKED)) { 1311 inst->setExecuted(); 1312 1313 instToCommit(inst); 1314 } 1315 // Store conditionals will mark themselves as executed, and 1316 // their writeback event will add the instruction to the queue 1317 // to commit. 1318 } else { 1319 panic("Unexpected memory type!\n"); 1320 } 1321 1322 } else { 1323 inst->execute(); 1324 1325 inst->setExecuted(); 1326 1327 instToCommit(inst); 1328 } 1329 1330 updateExeInstStats(inst); 1331 1332 // Check if branch was correct. This check happens after the 1333 // instruction is added to the queue because even if the branch 1334 // is mispredicted, the branch instruction itself is still valid. 1335 // Only handle this if there hasn't already been something that 1336 // redirects fetch in this group of instructions. 1337 1338 // This probably needs to prioritize the redirects if a different 1339 // scheduler is used. Currently the scheduler schedules the oldest 1340 // instruction first, so the branch resolution order will be correct. 1341 unsigned tid = inst->threadNumber; 1342 1343 if (!fetchRedirect[tid]) { 1344 1345 if (inst->mispredicted()) { 1346 fetchRedirect[tid] = true; 1347 1348 DPRINTF(IEW, "Execute: Branch mispredict detected.\n"); 1349 DPRINTF(IEW, "Execute: Redirecting fetch to PC: %#x.\n", 1350 inst->nextPC); 1351 1352 // If incorrect, then signal the ROB that it must be squashed. 1353 squashDueToBranch(inst, tid); 1354 1355 if (inst->predTaken()) { 1356 predictedTakenIncorrect++; 1357 } else { 1358 predictedNotTakenIncorrect++; 1359 } 1360 } else if (ldstQueue.violation(tid)) { 1361 fetchRedirect[tid] = true; 1362 1363 // Get the DynInst that caused the violation. Note that this 1364 // clears the violation signal. 1365 DynInstPtr violator; 1366 violator = ldstQueue.getMemDepViolator(tid); 1367 1368 DPRINTF(IEW, "LDSTQ detected a violation. Violator PC: " 1369 "%#x, inst PC: %#x. Addr is: %#x.\n", 1370 violator->readPC(), inst->readPC(), inst->physEffAddr); 1371 1372 // Tell the instruction queue that a violation has occured. 1373 instQueue.violation(inst, violator); 1374 1375 // Squash. 1376 squashDueToMemOrder(inst,tid); 1377 1378 ++memOrderViolationEvents; 1379 } else if (ldstQueue.loadBlocked(tid) && 1380 !ldstQueue.isLoadBlockedHandled(tid)) { 1381 fetchRedirect[tid] = true; 1382 1383 DPRINTF(IEW, "Load operation couldn't execute because the " 1384 "memory system is blocked. PC: %#x [sn:%lli]\n", 1385 inst->readPC(), inst->seqNum); 1386 1387 squashDueToMemBlocked(inst, tid); 1388 } 1389 } 1390 } 1391 1392 if (inst_num) { 1393 if (exeStatus == Idle) { 1394 exeStatus = Running; 1395 } 1396 1397 updatedQueues = true; 1398 1399 cpu->activityThisCycle(); 1400 } 1401 1402 // Need to reset this in case a writeback event needs to write into the 1403 // iew queue. That way the writeback event will write into the correct 1404 // spot in the queue. 1405 wbNumInst = 0; 1406} 1407 1408template <class Impl> 1409void 1410DefaultIEW<Impl>::writebackInsts() 1411{ 1412 // Loop through the head of the time buffer and wake any dependents. 1413 // These instructions are about to write back. In the simple model 1414 // this loop can really happen within the previous loop, but when 1415 // instructions have actual latencies, this loop must be separate. 1416 // Also mark scoreboard that this instruction is finally complete. 1417 // Either have IEW have direct access to rename map, or have this as 1418 // part of backwards communication. 1419 for (int inst_num = 0; inst_num < issueWidth && 1420 toCommit->insts[inst_num]; inst_num++) { 1421 DynInstPtr inst = toCommit->insts[inst_num]; 1422 int tid = inst->threadNumber; 1423 1424 DPRINTF(IEW, "Sending instructions to commit, PC %#x.\n", 1425 inst->readPC()); 1426 1427 iewInstsToCommit[tid]++; 1428 1429 // Some instructions will be sent to commit without having 1430 // executed because they need commit to handle them. 1431 // E.g. Uncached loads have not actually executed when they 1432 // are first sent to commit. Instead commit must tell the LSQ 1433 // when it's ready to execute the uncached load. 1434 if (!inst->isSquashed() && inst->isExecuted()) { 1435 int dependents = instQueue.wakeDependents(inst); 1436 1437 for (int i = 0; i < inst->numDestRegs(); i++) { 1438 //mark as Ready 1439 DPRINTF(IEW,"Setting Destination Register %i\n", 1440 inst->renamedDestRegIdx(i)); 1441 scoreboard->setReg(inst->renamedDestRegIdx(i)); 1442 } 1443 1444 producer_inst[tid]++; 1445 consumer_inst[tid]+= dependents; 1446 writeback_count[tid]++; 1447 } 1448 } 1449} 1450 1451template<class Impl> 1452void 1453DefaultIEW<Impl>::tick() 1454{ 1455 // Try to fill up issue queue with as many instructions as bandwidth 1456 // allows. 1457 wbNumInst = 0; 1458 wbCycle = 0; 1459 1460 wroteToTimeBuffer = false; 1461 updatedQueues = false; 1462 1463 sortInsts(); 1464 1465 list<unsigned>::iterator threads = (*activeThreads).begin(); 1466 1467 // Check stall and squash signals. 1468 while (threads != (*activeThreads).end()) { 1469 unsigned tid = *threads++; 1470 1471 DPRINTF(IEW,"Issue: Processing [tid:%i]\n",tid); 1472 1473 checkSignalsAndUpdate(tid); 1474 dispatch(tid); 1475 1476 } 1477 1478 if (exeStatus != Squashing) { 1479 executeInsts(); 1480 1481 writebackInsts(); 1482 1483 // Have the instruction queue try to schedule any ready instructions. 1484 // (In actuality, this scheduling is for instructions that will 1485 // be executed next cycle.) 1486 instQueue.scheduleReadyInsts(); 1487 1488 // Also should advance its own time buffers if the stage ran. 1489 // Not the best place for it, but this works (hopefully). 1490 issueToExecQueue.advance(); 1491 } 1492 1493 bool broadcast_free_entries = false; 1494 1495 if (updatedQueues || exeStatus == Running || updateLSQNextCycle) { 1496 exeStatus = Idle; 1497 updateLSQNextCycle = false; 1498 1499 broadcast_free_entries = true; 1500 } 1501 1502 // Writeback any stores using any leftover bandwidth. 1503 ldstQueue.writebackStores(); 1504 1505 // Free function units marked as being freed this cycle. 1506 fuPool->processFreeUnits(); 1507 1508 // Check the committed load/store signals to see if there's a load 1509 // or store to commit. Also check if it's being told to execute a 1510 // nonspeculative instruction. 1511 // This is pretty inefficient... 1512 1513 threads = (*activeThreads).begin(); 1514 while (threads != (*activeThreads).end()) { 1515 unsigned tid = (*threads++); 1516 1517 DPRINTF(IEW,"Processing [tid:%i]\n",tid); 1518 1519 if (fromCommit->commitInfo[tid].doneSeqNum != 0 && 1520 !fromCommit->commitInfo[tid].squash && 1521 !fromCommit->commitInfo[tid].robSquashing) { 1522 1523 ldstQueue.commitStores(fromCommit->commitInfo[tid].doneSeqNum,tid); 1524 1525 ldstQueue.commitLoads(fromCommit->commitInfo[tid].doneSeqNum,tid); 1526 1527 updateLSQNextCycle = true; 1528 instQueue.commit(fromCommit->commitInfo[tid].doneSeqNum,tid); 1529 } 1530 1531 if (fromCommit->commitInfo[tid].nonSpecSeqNum != 0) { 1532 1533 //DPRINTF(IEW,"NonspecInst from thread %i",tid); 1534 if (fromCommit->commitInfo[tid].uncached) { 1535 instQueue.replayMemInst(fromCommit->commitInfo[tid].uncachedLoad); 1536 } else { 1537 instQueue.scheduleNonSpec( 1538 fromCommit->commitInfo[tid].nonSpecSeqNum); 1539 } 1540 } 1541 1542 if (broadcast_free_entries) { 1543 toFetch->iewInfo[tid].iqCount = 1544 instQueue.getCount(tid); 1545 toFetch->iewInfo[tid].ldstqCount = 1546 ldstQueue.getCount(tid); 1547 1548 toRename->iewInfo[tid].usedIQ = true; 1549 toRename->iewInfo[tid].freeIQEntries = 1550 instQueue.numFreeEntries(); 1551 toRename->iewInfo[tid].usedLSQ = true; 1552 toRename->iewInfo[tid].freeLSQEntries = 1553 ldstQueue.numFreeEntries(tid); 1554 1555 wroteToTimeBuffer = true; 1556 } 1557 1558 DPRINTF(IEW, "[tid:%i], Dispatch dispatched %i instructions.\n", 1559 tid, toRename->iewInfo[tid].dispatched); 1560 1561 //thread_queue.pop(); 1562 } 1563 1564 DPRINTF(IEW, "IQ has %i free entries (Can schedule: %i). " 1565 "LSQ has %i free entries.\n", 1566 instQueue.numFreeEntries(), instQueue.hasReadyInsts(), 1567 ldstQueue.numFreeEntries()); 1568 1569 updateStatus(); 1570 1571 if (wroteToTimeBuffer) { 1572 DPRINTF(Activity, "Activity this cycle.\n"); 1573 cpu->activityThisCycle(); 1574 } 1575} 1576 1577template <class Impl> 1578void 1579DefaultIEW<Impl>::updateExeInstStats(DynInstPtr &inst) 1580{ 1581 int thread_number = inst->threadNumber; 1582 1583 // 1584 // Pick off the software prefetches 1585 // 1586#ifdef TARGET_ALPHA 1587 if (inst->isDataPrefetch()) 1588 exe_swp[thread_number]++; 1589 else 1590 iewExecutedInsts++; 1591#else 1592 iewExecutedInsts[thread_number]++; 1593#endif 1594 1595 // 1596 // Control operations 1597 // 1598 if (inst->isControl()) 1599 exe_branches[thread_number]++; 1600 1601 // 1602 // Memory operations 1603 // 1604 if (inst->isMemRef()) { 1605 exe_refs[thread_number]++; 1606 1607 if (inst->isLoad()) { 1608 iewExecLoadInsts[thread_number]++; 1609 } 1610 } 1611} 1612