cpu.hh revision 8922:17f037ad8918
1/* 2 * Copyright (c) 2011 ARM Limited 3 * All rights reserved 4 * 5 * The license below extends only to copyright in the software and shall 6 * not be construed as granting a license to any other intellectual 7 * property including but not limited to intellectual property relating 8 * to a hardware implementation of the functionality of the software 9 * licensed hereunder. You may use the software subject to the license 10 * terms below provided that you ensure that this notice is replicated 11 * unmodified and in its entirety in all distributions of the software, 12 * modified or unmodified, in source code or in binary form. 13 * 14 * Copyright (c) 2004-2005 The Regents of The University of Michigan 15 * Copyright (c) 2011 Regents of the University of California 16 * All rights reserved. 17 * 18 * Redistribution and use in source and binary forms, with or without 19 * modification, are permitted provided that the following conditions are 20 * met: redistributions of source code must retain the above copyright 21 * notice, this list of conditions and the following disclaimer; 22 * redistributions in binary form must reproduce the above copyright 23 * notice, this list of conditions and the following disclaimer in the 24 * documentation and/or other materials provided with the distribution; 25 * neither the name of the copyright holders nor the names of its 26 * contributors may be used to endorse or promote products derived from 27 * this software without specific prior written permission. 28 * 29 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 30 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 31 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 32 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 33 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 34 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 35 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 36 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 37 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 38 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 39 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 40 * 41 * Authors: Kevin Lim 42 * Korey Sewell 43 * Rick Strong 44 */ 45 46#ifndef __CPU_O3_CPU_HH__ 47#define __CPU_O3_CPU_HH__ 48 49#include <iostream> 50#include <list> 51#include <queue> 52#include <set> 53#include <vector> 54 55#include "arch/types.hh" 56#include "base/statistics.hh" 57#include "config/the_isa.hh" 58#include "cpu/o3/comm.hh" 59#include "cpu/o3/cpu_policy.hh" 60#include "cpu/o3/scoreboard.hh" 61#include "cpu/o3/thread_state.hh" 62#include "cpu/activity.hh" 63#include "cpu/base.hh" 64#include "cpu/simple_thread.hh" 65#include "cpu/timebuf.hh" 66//#include "cpu/o3/thread_context.hh" 67#include "params/DerivO3CPU.hh" 68#include "sim/process.hh" 69 70template <class> 71class Checker; 72class ThreadContext; 73template <class> 74class O3ThreadContext; 75 76class Checkpoint; 77class MemObject; 78class Process; 79 80struct BaseCPUParams; 81 82class BaseO3CPU : public BaseCPU 83{ 84 //Stuff that's pretty ISA independent will go here. 85 public: 86 BaseO3CPU(BaseCPUParams *params); 87 88 void regStats(); 89}; 90 91/** 92 * FullO3CPU class, has each of the stages (fetch through commit) 93 * within it, as well as all of the time buffers between stages. The 94 * tick() function for the CPU is defined here. 95 */ 96template <class Impl> 97class FullO3CPU : public BaseO3CPU 98{ 99 public: 100 // Typedefs from the Impl here. 101 typedef typename Impl::CPUPol CPUPolicy; 102 typedef typename Impl::DynInstPtr DynInstPtr; 103 typedef typename Impl::O3CPU O3CPU; 104 105 typedef O3ThreadState<Impl> ImplState; 106 typedef O3ThreadState<Impl> Thread; 107 108 typedef typename std::list<DynInstPtr>::iterator ListIt; 109 110 friend class O3ThreadContext<Impl>; 111 112 public: 113 enum Status { 114 Running, 115 Idle, 116 Halted, 117 Blocked, 118 SwitchedOut 119 }; 120 121 TheISA::TLB * itb; 122 TheISA::TLB * dtb; 123 124 /** Overall CPU status. */ 125 Status _status; 126 127 /** Per-thread status in CPU, used for SMT. */ 128 Status _threadStatus[Impl::MaxThreads]; 129 130 private: 131 132 /** 133 * IcachePort class for instruction fetch. 134 */ 135 class IcachePort : public CpuPort 136 { 137 protected: 138 /** Pointer to fetch. */ 139 DefaultFetch<Impl> *fetch; 140 141 public: 142 /** Default constructor. */ 143 IcachePort(DefaultFetch<Impl> *_fetch, FullO3CPU<Impl>* _cpu) 144 : CpuPort(_fetch->name() + "-iport", _cpu), fetch(_fetch) 145 { } 146 147 protected: 148 149 /** Timing version of receive. Handles setting fetch to the 150 * proper status to start fetching. */ 151 virtual bool recvTiming(PacketPtr pkt); 152 153 /** Handles doing a retry of a failed fetch. */ 154 virtual void recvRetry(); 155 }; 156 157 /** 158 * DcachePort class for the load/store queue. 159 */ 160 class DcachePort : public CpuPort 161 { 162 protected: 163 164 /** Pointer to LSQ. */ 165 LSQ<Impl> *lsq; 166 167 public: 168 /** Default constructor. */ 169 DcachePort(LSQ<Impl> *_lsq, FullO3CPU<Impl>* _cpu) 170 : CpuPort(_lsq->name() + "-dport", _cpu), lsq(_lsq) 171 { } 172 173 protected: 174 175 /** Timing version of receive. Handles writing back and 176 * completing the load or store that has returned from 177 * memory. */ 178 virtual bool recvTiming(PacketPtr pkt); 179 180 /** Handles doing a retry of the previous send. */ 181 virtual void recvRetry(); 182 183 /** 184 * As this CPU requires snooping to maintain the load store queue 185 * change the behaviour from the base CPU port. 186 * 187 * @return true since we have to snoop 188 */ 189 virtual bool isSnooping() const { return true; } 190 }; 191 192 class TickEvent : public Event 193 { 194 private: 195 /** Pointer to the CPU. */ 196 FullO3CPU<Impl> *cpu; 197 198 public: 199 /** Constructs a tick event. */ 200 TickEvent(FullO3CPU<Impl> *c); 201 202 /** Processes a tick event, calling tick() on the CPU. */ 203 void process(); 204 /** Returns the description of the tick event. */ 205 const char *description() const; 206 }; 207 208 /** The tick event used for scheduling CPU ticks. */ 209 TickEvent tickEvent; 210 211 /** Schedule tick event, regardless of its current state. */ 212 void scheduleTickEvent(int delay) 213 { 214 if (tickEvent.squashed()) 215 reschedule(tickEvent, nextCycle(curTick() + ticks(delay))); 216 else if (!tickEvent.scheduled()) 217 schedule(tickEvent, nextCycle(curTick() + ticks(delay))); 218 } 219 220 /** Unschedule tick event, regardless of its current state. */ 221 void unscheduleTickEvent() 222 { 223 if (tickEvent.scheduled()) 224 tickEvent.squash(); 225 } 226 227 class ActivateThreadEvent : public Event 228 { 229 private: 230 /** Number of Thread to Activate */ 231 ThreadID tid; 232 233 /** Pointer to the CPU. */ 234 FullO3CPU<Impl> *cpu; 235 236 public: 237 /** Constructs the event. */ 238 ActivateThreadEvent(); 239 240 /** Initialize Event */ 241 void init(int thread_num, FullO3CPU<Impl> *thread_cpu); 242 243 /** Processes the event, calling activateThread() on the CPU. */ 244 void process(); 245 246 /** Returns the description of the event. */ 247 const char *description() const; 248 }; 249 250 /** Schedule thread to activate , regardless of its current state. */ 251 void 252 scheduleActivateThreadEvent(ThreadID tid, int delay) 253 { 254 // Schedule thread to activate, regardless of its current state. 255 if (activateThreadEvent[tid].squashed()) 256 reschedule(activateThreadEvent[tid], 257 nextCycle(curTick() + ticks(delay))); 258 else if (!activateThreadEvent[tid].scheduled()) { 259 Tick when = nextCycle(curTick() + ticks(delay)); 260 261 // Check if the deallocateEvent is also scheduled, and make 262 // sure they do not happen at same time causing a sleep that 263 // is never woken from. 264 if (deallocateContextEvent[tid].scheduled() && 265 deallocateContextEvent[tid].when() == when) { 266 when++; 267 } 268 269 schedule(activateThreadEvent[tid], when); 270 } 271 } 272 273 /** Unschedule actiavte thread event, regardless of its current state. */ 274 void 275 unscheduleActivateThreadEvent(ThreadID tid) 276 { 277 if (activateThreadEvent[tid].scheduled()) 278 activateThreadEvent[tid].squash(); 279 } 280 281 /** The tick event used for scheduling CPU ticks. */ 282 ActivateThreadEvent activateThreadEvent[Impl::MaxThreads]; 283 284 class DeallocateContextEvent : public Event 285 { 286 private: 287 /** Number of Thread to deactivate */ 288 ThreadID tid; 289 290 /** Should the thread be removed from the CPU? */ 291 bool remove; 292 293 /** Pointer to the CPU. */ 294 FullO3CPU<Impl> *cpu; 295 296 public: 297 /** Constructs the event. */ 298 DeallocateContextEvent(); 299 300 /** Initialize Event */ 301 void init(int thread_num, FullO3CPU<Impl> *thread_cpu); 302 303 /** Processes the event, calling activateThread() on the CPU. */ 304 void process(); 305 306 /** Sets whether the thread should also be removed from the CPU. */ 307 void setRemove(bool _remove) { remove = _remove; } 308 309 /** Returns the description of the event. */ 310 const char *description() const; 311 }; 312 313 /** Schedule cpu to deallocate thread context.*/ 314 void 315 scheduleDeallocateContextEvent(ThreadID tid, bool remove, int delay) 316 { 317 // Schedule thread to activate, regardless of its current state. 318 if (deallocateContextEvent[tid].squashed()) 319 reschedule(deallocateContextEvent[tid], 320 nextCycle(curTick() + ticks(delay))); 321 else if (!deallocateContextEvent[tid].scheduled()) 322 schedule(deallocateContextEvent[tid], 323 nextCycle(curTick() + ticks(delay))); 324 } 325 326 /** Unschedule thread deallocation in CPU */ 327 void 328 unscheduleDeallocateContextEvent(ThreadID tid) 329 { 330 if (deallocateContextEvent[tid].scheduled()) 331 deallocateContextEvent[tid].squash(); 332 } 333 334 /** The tick event used for scheduling CPU ticks. */ 335 DeallocateContextEvent deallocateContextEvent[Impl::MaxThreads]; 336 337 public: 338 /** Constructs a CPU with the given parameters. */ 339 FullO3CPU(DerivO3CPUParams *params); 340 /** Destructor. */ 341 ~FullO3CPU(); 342 343 /** Registers statistics. */ 344 void regStats(); 345 346 void demapPage(Addr vaddr, uint64_t asn) 347 { 348 this->itb->demapPage(vaddr, asn); 349 this->dtb->demapPage(vaddr, asn); 350 } 351 352 void demapInstPage(Addr vaddr, uint64_t asn) 353 { 354 this->itb->demapPage(vaddr, asn); 355 } 356 357 void demapDataPage(Addr vaddr, uint64_t asn) 358 { 359 this->dtb->demapPage(vaddr, asn); 360 } 361 362 /** Ticks CPU, calling tick() on each stage, and checking the overall 363 * activity to see if the CPU should deschedule itself. 364 */ 365 void tick(); 366 367 /** Initialize the CPU */ 368 void init(); 369 370 /** Returns the Number of Active Threads in the CPU */ 371 int numActiveThreads() 372 { return activeThreads.size(); } 373 374 /** Add Thread to Active Threads List */ 375 void activateThread(ThreadID tid); 376 377 /** Remove Thread from Active Threads List */ 378 void deactivateThread(ThreadID tid); 379 380 /** Setup CPU to insert a thread's context */ 381 void insertThread(ThreadID tid); 382 383 /** Remove all of a thread's context from CPU */ 384 void removeThread(ThreadID tid); 385 386 /** Count the Total Instructions Committed in the CPU. */ 387 virtual Counter totalInsts() const; 388 389 /** Count the Total Ops (including micro ops) committed in the CPU. */ 390 virtual Counter totalOps() const; 391 392 /** Add Thread to Active Threads List. */ 393 void activateContext(ThreadID tid, int delay); 394 395 /** Remove Thread from Active Threads List */ 396 void suspendContext(ThreadID tid); 397 398 /** Remove Thread from Active Threads List && 399 * Possibly Remove Thread Context from CPU. 400 */ 401 bool scheduleDeallocateContext(ThreadID tid, bool remove, int delay = 1); 402 403 /** Remove Thread from Active Threads List && 404 * Remove Thread Context from CPU. 405 */ 406 void haltContext(ThreadID tid); 407 408 /** Activate a Thread When CPU Resources are Available. */ 409 void activateWhenReady(ThreadID tid); 410 411 /** Add or Remove a Thread Context in the CPU. */ 412 void doContextSwitch(); 413 414 /** Update The Order In Which We Process Threads. */ 415 void updateThreadPriority(); 416 417 /** Serialize state. */ 418 virtual void serialize(std::ostream &os); 419 420 /** Unserialize from a checkpoint. */ 421 virtual void unserialize(Checkpoint *cp, const std::string §ion); 422 423 public: 424 /** Executes a syscall. 425 * @todo: Determine if this needs to be virtual. 426 */ 427 void syscall(int64_t callnum, ThreadID tid); 428 429 /** Starts draining the CPU's pipeline of all instructions in 430 * order to stop all memory accesses. */ 431 virtual unsigned int drain(Event *drain_event); 432 433 /** Resumes execution after a drain. */ 434 virtual void resume(); 435 436 /** Signals to this CPU that a stage has completed switching out. */ 437 void signalDrained(); 438 439 /** Switches out this CPU. */ 440 virtual void switchOut(); 441 442 /** Takes over from another CPU. */ 443 virtual void takeOverFrom(BaseCPU *oldCPU); 444 445 /** Get the current instruction sequence number, and increment it. */ 446 InstSeqNum getAndIncrementInstSeq() 447 { return globalSeqNum++; } 448 449 /** Traps to handle given fault. */ 450 void trap(Fault fault, ThreadID tid, StaticInstPtr inst); 451 452 /** HW return from error interrupt. */ 453 Fault hwrei(ThreadID tid); 454 455 bool simPalCheck(int palFunc, ThreadID tid); 456 457 /** Returns the Fault for any valid interrupt. */ 458 Fault getInterrupts(); 459 460 /** Processes any an interrupt fault. */ 461 void processInterrupts(Fault interrupt); 462 463 /** Halts the CPU. */ 464 void halt() { panic("Halt not implemented!\n"); } 465 466 /** Check if this address is a valid instruction address. */ 467 bool validInstAddr(Addr addr) { return true; } 468 469 /** Check if this address is a valid data address. */ 470 bool validDataAddr(Addr addr) { return true; } 471 472 /** Register accessors. Index refers to the physical register index. */ 473 474 /** Reads a miscellaneous register. */ 475 TheISA::MiscReg readMiscRegNoEffect(int misc_reg, ThreadID tid); 476 477 /** Reads a misc. register, including any side effects the read 478 * might have as defined by the architecture. 479 */ 480 TheISA::MiscReg readMiscReg(int misc_reg, ThreadID tid); 481 482 /** Sets a miscellaneous register. */ 483 void setMiscRegNoEffect(int misc_reg, const TheISA::MiscReg &val, 484 ThreadID tid); 485 486 /** Sets a misc. register, including any side effects the write 487 * might have as defined by the architecture. 488 */ 489 void setMiscReg(int misc_reg, const TheISA::MiscReg &val, 490 ThreadID tid); 491 492 uint64_t readIntReg(int reg_idx); 493 494 TheISA::FloatReg readFloatReg(int reg_idx); 495 496 TheISA::FloatRegBits readFloatRegBits(int reg_idx); 497 498 void setIntReg(int reg_idx, uint64_t val); 499 500 void setFloatReg(int reg_idx, TheISA::FloatReg val); 501 502 void setFloatRegBits(int reg_idx, TheISA::FloatRegBits val); 503 504 uint64_t readArchIntReg(int reg_idx, ThreadID tid); 505 506 float readArchFloatReg(int reg_idx, ThreadID tid); 507 508 uint64_t readArchFloatRegInt(int reg_idx, ThreadID tid); 509 510 /** Architectural register accessors. Looks up in the commit 511 * rename table to obtain the true physical index of the 512 * architected register first, then accesses that physical 513 * register. 514 */ 515 void setArchIntReg(int reg_idx, uint64_t val, ThreadID tid); 516 517 void setArchFloatReg(int reg_idx, float val, ThreadID tid); 518 519 void setArchFloatRegInt(int reg_idx, uint64_t val, ThreadID tid); 520 521 /** Sets the commit PC state of a specific thread. */ 522 void pcState(const TheISA::PCState &newPCState, ThreadID tid); 523 524 /** Reads the commit PC state of a specific thread. */ 525 TheISA::PCState pcState(ThreadID tid); 526 527 /** Reads the commit PC of a specific thread. */ 528 Addr instAddr(ThreadID tid); 529 530 /** Reads the commit micro PC of a specific thread. */ 531 MicroPC microPC(ThreadID tid); 532 533 /** Reads the next PC of a specific thread. */ 534 Addr nextInstAddr(ThreadID tid); 535 536 /** Initiates a squash of all in-flight instructions for a given 537 * thread. The source of the squash is an external update of 538 * state through the TC. 539 */ 540 void squashFromTC(ThreadID tid); 541 542 /** Function to add instruction onto the head of the list of the 543 * instructions. Used when new instructions are fetched. 544 */ 545 ListIt addInst(DynInstPtr &inst); 546 547 /** Function to tell the CPU that an instruction has completed. */ 548 void instDone(ThreadID tid, DynInstPtr &inst); 549 550 /** Remove an instruction from the front end of the list. There's 551 * no restriction on location of the instruction. 552 */ 553 void removeFrontInst(DynInstPtr &inst); 554 555 /** Remove all instructions that are not currently in the ROB. 556 * There's also an option to not squash delay slot instructions.*/ 557 void removeInstsNotInROB(ThreadID tid); 558 559 /** Remove all instructions younger than the given sequence number. */ 560 void removeInstsUntil(const InstSeqNum &seq_num, ThreadID tid); 561 562 /** Removes the instruction pointed to by the iterator. */ 563 inline void squashInstIt(const ListIt &instIt, ThreadID tid); 564 565 /** Cleans up all instructions on the remove list. */ 566 void cleanUpRemovedInsts(); 567 568 /** Debug function to print all instructions on the list. */ 569 void dumpInsts(); 570 571 public: 572#ifndef NDEBUG 573 /** Count of total number of dynamic instructions in flight. */ 574 int instcount; 575#endif 576 577 /** List of all the instructions in flight. */ 578 std::list<DynInstPtr> instList; 579 580 /** List of all the instructions that will be removed at the end of this 581 * cycle. 582 */ 583 std::queue<ListIt> removeList; 584 585#ifdef DEBUG 586 /** Debug structure to keep track of the sequence numbers still in 587 * flight. 588 */ 589 std::set<InstSeqNum> snList; 590#endif 591 592 /** Records if instructions need to be removed this cycle due to 593 * being retired or squashed. 594 */ 595 bool removeInstsThisCycle; 596 597 protected: 598 /** The fetch stage. */ 599 typename CPUPolicy::Fetch fetch; 600 601 /** The decode stage. */ 602 typename CPUPolicy::Decode decode; 603 604 /** The dispatch stage. */ 605 typename CPUPolicy::Rename rename; 606 607 /** The issue/execute/writeback stages. */ 608 typename CPUPolicy::IEW iew; 609 610 /** The commit stage. */ 611 typename CPUPolicy::Commit commit; 612 613 /** The register file. */ 614 typename CPUPolicy::RegFile regFile; 615 616 /** The free list. */ 617 typename CPUPolicy::FreeList freeList; 618 619 /** The rename map. */ 620 typename CPUPolicy::RenameMap renameMap[Impl::MaxThreads]; 621 622 /** The commit rename map. */ 623 typename CPUPolicy::RenameMap commitRenameMap[Impl::MaxThreads]; 624 625 /** The re-order buffer. */ 626 typename CPUPolicy::ROB rob; 627 628 /** Active Threads List */ 629 std::list<ThreadID> activeThreads; 630 631 /** Integer Register Scoreboard */ 632 Scoreboard scoreboard; 633 634 TheISA::ISA isa[Impl::MaxThreads]; 635 636 /** Instruction port. Note that it has to appear after the fetch stage. */ 637 IcachePort icachePort; 638 639 /** Data port. Note that it has to appear after the iew stages */ 640 DcachePort dcachePort; 641 642 public: 643 /** Enum to give each stage a specific index, so when calling 644 * activateStage() or deactivateStage(), they can specify which stage 645 * is being activated/deactivated. 646 */ 647 enum StageIdx { 648 FetchIdx, 649 DecodeIdx, 650 RenameIdx, 651 IEWIdx, 652 CommitIdx, 653 NumStages }; 654 655 /** Typedefs from the Impl to get the structs that each of the 656 * time buffers should use. 657 */ 658 typedef typename CPUPolicy::TimeStruct TimeStruct; 659 660 typedef typename CPUPolicy::FetchStruct FetchStruct; 661 662 typedef typename CPUPolicy::DecodeStruct DecodeStruct; 663 664 typedef typename CPUPolicy::RenameStruct RenameStruct; 665 666 typedef typename CPUPolicy::IEWStruct IEWStruct; 667 668 /** The main time buffer to do backwards communication. */ 669 TimeBuffer<TimeStruct> timeBuffer; 670 671 /** The fetch stage's instruction queue. */ 672 TimeBuffer<FetchStruct> fetchQueue; 673 674 /** The decode stage's instruction queue. */ 675 TimeBuffer<DecodeStruct> decodeQueue; 676 677 /** The rename stage's instruction queue. */ 678 TimeBuffer<RenameStruct> renameQueue; 679 680 /** The IEW stage's instruction queue. */ 681 TimeBuffer<IEWStruct> iewQueue; 682 683 private: 684 /** The activity recorder; used to tell if the CPU has any 685 * activity remaining or if it can go to idle and deschedule 686 * itself. 687 */ 688 ActivityRecorder activityRec; 689 690 public: 691 /** Records that there was time buffer activity this cycle. */ 692 void activityThisCycle() { activityRec.activity(); } 693 694 /** Changes a stage's status to active within the activity recorder. */ 695 void activateStage(const StageIdx idx) 696 { activityRec.activateStage(idx); } 697 698 /** Changes a stage's status to inactive within the activity recorder. */ 699 void deactivateStage(const StageIdx idx) 700 { activityRec.deactivateStage(idx); } 701 702 /** Wakes the CPU, rescheduling the CPU if it's not already active. */ 703 void wakeCPU(); 704 705 virtual void wakeup(); 706 707 /** Gets a free thread id. Use if thread ids change across system. */ 708 ThreadID getFreeTid(); 709 710 public: 711 /** Returns a pointer to a thread context. */ 712 ThreadContext * 713 tcBase(ThreadID tid) 714 { 715 return thread[tid]->getTC(); 716 } 717 718 /** The global sequence number counter. */ 719 InstSeqNum globalSeqNum;//[Impl::MaxThreads]; 720 721 /** Pointer to the checker, which can dynamically verify 722 * instruction results at run time. This can be set to NULL if it 723 * is not being used. 724 */ 725 Checker<Impl> *checker; 726 727 /** Pointer to the system. */ 728 System *system; 729 730 /** Event to call process() on once draining has completed. */ 731 Event *drainEvent; 732 733 /** Counter of how many stages have completed draining. */ 734 int drainCount; 735 736 /** Pointers to all of the threads in the CPU. */ 737 std::vector<Thread *> thread; 738 739 /** Whether or not the CPU should defer its registration. */ 740 bool deferRegistration; 741 742 /** Is there a context switch pending? */ 743 bool contextSwitch; 744 745 /** Threads Scheduled to Enter CPU */ 746 std::list<int> cpuWaitList; 747 748 /** The cycle that the CPU was last running, used for statistics. */ 749 Tick lastRunningCycle; 750 751 /** The cycle that the CPU was last activated by a new thread*/ 752 Tick lastActivatedCycle; 753 754 /** Mapping for system thread id to cpu id */ 755 std::map<ThreadID, unsigned> threadMap; 756 757 /** Available thread ids in the cpu*/ 758 std::vector<ThreadID> tids; 759 760 /** CPU read function, forwards read to LSQ. */ 761 Fault read(RequestPtr &req, RequestPtr &sreqLow, RequestPtr &sreqHigh, 762 uint8_t *data, int load_idx) 763 { 764 return this->iew.ldstQueue.read(req, sreqLow, sreqHigh, 765 data, load_idx); 766 } 767 768 /** CPU write function, forwards write to LSQ. */ 769 Fault write(RequestPtr &req, RequestPtr &sreqLow, RequestPtr &sreqHigh, 770 uint8_t *data, int store_idx) 771 { 772 return this->iew.ldstQueue.write(req, sreqLow, sreqHigh, 773 data, store_idx); 774 } 775 776 /** Used by the fetch unit to get a hold of the instruction port. */ 777 virtual CpuPort &getInstPort() { return icachePort; } 778 779 /** Get the dcache port (used to find block size for translations). */ 780 virtual CpuPort &getDataPort() { return dcachePort; } 781 782 Addr lockAddr; 783 784 /** Temporary fix for the lock flag, works in the UP case. */ 785 bool lockFlag; 786 787 /** Stat for total number of times the CPU is descheduled. */ 788 Stats::Scalar timesIdled; 789 /** Stat for total number of cycles the CPU spends descheduled. */ 790 Stats::Scalar idleCycles; 791 /** Stat for total number of cycles the CPU spends descheduled due to a 792 * quiesce operation or waiting for an interrupt. */ 793 Stats::Scalar quiesceCycles; 794 /** Stat for the number of committed instructions per thread. */ 795 Stats::Vector committedInsts; 796 /** Stat for the number of committed ops (including micro ops) per thread. */ 797 Stats::Vector committedOps; 798 /** Stat for the total number of committed instructions. */ 799 Stats::Scalar totalCommittedInsts; 800 /** Stat for the CPI per thread. */ 801 Stats::Formula cpi; 802 /** Stat for the total CPI. */ 803 Stats::Formula totalCpi; 804 /** Stat for the IPC per thread. */ 805 Stats::Formula ipc; 806 /** Stat for the total IPC. */ 807 Stats::Formula totalIpc; 808 809 //number of integer register file accesses 810 Stats::Scalar intRegfileReads; 811 Stats::Scalar intRegfileWrites; 812 //number of float register file accesses 813 Stats::Scalar fpRegfileReads; 814 Stats::Scalar fpRegfileWrites; 815 //number of misc 816 Stats::Scalar miscRegfileReads; 817 Stats::Scalar miscRegfileWrites; 818}; 819 820#endif // __CPU_O3_CPU_HH__ 821