BaseCPU.py revision 12276:22c220be30c5 
1# Copyright (c) 2012-2013, 2015-2017 ARM Limited
2# All rights reserved.
3#
4# The license below extends only to copyright in the software and shall
5# not be construed as granting a license to any other intellectual
6# property including but not limited to intellectual property relating
7# to a hardware implementation of the functionality of the software
8# licensed hereunder.  You may use the software subject to the license
9# terms below provided that you ensure that this notice is replicated
10# unmodified and in its entirety in all distributions of the software,
11# modified or unmodified, in source code or in binary form.
12#
13# Copyright (c) 2005-2008 The Regents of The University of Michigan
14# Copyright (c) 2011 Regents of the University of California
15# All rights reserved.
16#
17# Redistribution and use in source and binary forms, with or without
18# modification, are permitted provided that the following conditions are
19# met: redistributions of source code must retain the above copyright
20# notice, this list of conditions and the following disclaimer;
21# redistributions in binary form must reproduce the above copyright
22# notice, this list of conditions and the following disclaimer in the
23# documentation and/or other materials provided with the distribution;
24# neither the name of the copyright holders nor the names of its
25# contributors may be used to endorse or promote products derived from
26# this software without specific prior written permission.
27#
28# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39#
40# Authors: Nathan Binkert
41#          Rick Strong
42#          Andreas Hansson
43
44import sys
45
46from m5.SimObject import *
47from m5.defines import buildEnv
48from m5.params import *
49from m5.proxy import *
50
51from XBar import L2XBar
52from InstTracer import InstTracer
53from CPUTracers import ExeTracer
54from MemObject import MemObject
55from ClockDomain import *
56
57default_tracer = ExeTracer()
58
59if buildEnv['TARGET_ISA'] == 'alpha':
60    from AlphaTLB import AlphaDTB, AlphaITB
61    from AlphaInterrupts import AlphaInterrupts
62    from AlphaISA import AlphaISA
63    isa_class = AlphaISA
64elif buildEnv['TARGET_ISA'] == 'sparc':
65    from SparcTLB import SparcTLB
66    from SparcInterrupts import SparcInterrupts
67    from SparcISA import SparcISA
68    isa_class = SparcISA
69elif buildEnv['TARGET_ISA'] == 'x86':
70    from X86TLB import X86TLB
71    from X86LocalApic import X86LocalApic
72    from X86ISA import X86ISA
73    isa_class = X86ISA
74elif buildEnv['TARGET_ISA'] == 'mips':
75    from MipsTLB import MipsTLB
76    from MipsInterrupts import MipsInterrupts
77    from MipsISA import MipsISA
78    isa_class = MipsISA
79elif buildEnv['TARGET_ISA'] == 'arm':
80    from ArmTLB import ArmTLB, ArmStage2IMMU, ArmStage2DMMU
81    from ArmInterrupts import ArmInterrupts
82    from ArmISA import ArmISA
83    isa_class = ArmISA
84elif buildEnv['TARGET_ISA'] == 'power':
85    from PowerTLB import PowerTLB
86    from PowerInterrupts import PowerInterrupts
87    from PowerISA import PowerISA
88    isa_class = PowerISA
89elif buildEnv['TARGET_ISA'] == 'riscv':
90    from RiscvTLB import RiscvTLB
91    from RiscvInterrupts import RiscvInterrupts
92    from RiscvISA import RiscvISA
93    isa_class = RiscvISA
94
95class BaseCPU(MemObject):
96    type = 'BaseCPU'
97    abstract = True
98    cxx_header = "cpu/base.hh"
99
100    cxx_exports = [
101        PyBindMethod("switchOut"),
102        PyBindMethod("takeOverFrom"),
103        PyBindMethod("switchedOut"),
104        PyBindMethod("flushTLBs"),
105        PyBindMethod("totalInsts"),
106        PyBindMethod("scheduleInstStop"),
107        PyBindMethod("scheduleLoadStop"),
108        PyBindMethod("getCurrentInstCount"),
109    ]
110
111    @classmethod
112    def memory_mode(cls):
113        """Which memory mode does this CPU require?"""
114        return 'invalid'
115
116    @classmethod
117    def require_caches(cls):
118        """Does the CPU model require caches?
119
120        Some CPU models might make assumptions that require them to
121        have caches.
122        """
123        return False
124
125    @classmethod
126    def support_take_over(cls):
127        """Does the CPU model support CPU takeOverFrom?"""
128        return False
129
130    def takeOverFrom(self, old_cpu):
131        self._ccObject.takeOverFrom(old_cpu._ccObject)
132
133
134    system = Param.System(Parent.any, "system object")
135    cpu_id = Param.Int(-1, "CPU identifier")
136    socket_id = Param.Unsigned(0, "Physical Socket identifier")
137    numThreads = Param.Unsigned(1, "number of HW thread contexts")
138    pwr_gating_latency = Param.Cycles(300,
139        "Latency to enter power gating state when all contexts are suspended")
140
141    function_trace = Param.Bool(False, "Enable function trace")
142    function_trace_start = Param.Tick(0, "Tick to start function trace")
143
144    checker = Param.BaseCPU(NULL, "checker CPU")
145
146    syscallRetryLatency = Param.Cycles(10000, "Cycles to wait until retry")
147
148    do_checkpoint_insts = Param.Bool(True,
149        "enable checkpoint pseudo instructions")
150    do_statistics_insts = Param.Bool(True,
151        "enable statistics pseudo instructions")
152
153    profile = Param.Latency('0ns', "trace the kernel stack")
154    do_quiesce = Param.Bool(True, "enable quiesce instructions")
155
156    wait_for_remote_gdb = Param.Bool(False,
157        "Wait for a remote GDB connection");
158
159    workload = VectorParam.Process([], "processes to run")
160
161    if buildEnv['TARGET_ISA'] == 'sparc':
162        dtb = Param.SparcTLB(SparcTLB(), "Data TLB")
163        itb = Param.SparcTLB(SparcTLB(), "Instruction TLB")
164        interrupts = VectorParam.SparcInterrupts(
165                [], "Interrupt Controller")
166        isa = VectorParam.SparcISA([ isa_class() ], "ISA instance")
167    elif buildEnv['TARGET_ISA'] == 'alpha':
168        dtb = Param.AlphaTLB(AlphaDTB(), "Data TLB")
169        itb = Param.AlphaTLB(AlphaITB(), "Instruction TLB")
170        interrupts = VectorParam.AlphaInterrupts(
171                [], "Interrupt Controller")
172        isa = VectorParam.AlphaISA([ isa_class() ], "ISA instance")
173    elif buildEnv['TARGET_ISA'] == 'x86':
174        dtb = Param.X86TLB(X86TLB(), "Data TLB")
175        itb = Param.X86TLB(X86TLB(), "Instruction TLB")
176        interrupts = VectorParam.X86LocalApic([], "Interrupt Controller")
177        isa = VectorParam.X86ISA([ isa_class() ], "ISA instance")
178    elif buildEnv['TARGET_ISA'] == 'mips':
179        dtb = Param.MipsTLB(MipsTLB(), "Data TLB")
180        itb = Param.MipsTLB(MipsTLB(), "Instruction TLB")
181        interrupts = VectorParam.MipsInterrupts(
182                [], "Interrupt Controller")
183        isa = VectorParam.MipsISA([ isa_class() ], "ISA instance")
184    elif buildEnv['TARGET_ISA'] == 'arm':
185        dtb = Param.ArmTLB(ArmTLB(), "Data TLB")
186        itb = Param.ArmTLB(ArmTLB(), "Instruction TLB")
187        istage2_mmu = Param.ArmStage2MMU(ArmStage2IMMU(), "Stage 2 trans")
188        dstage2_mmu = Param.ArmStage2MMU(ArmStage2DMMU(), "Stage 2 trans")
189        interrupts = VectorParam.ArmInterrupts(
190                [], "Interrupt Controller")
191        isa = VectorParam.ArmISA([ isa_class() ], "ISA instance")
192    elif buildEnv['TARGET_ISA'] == 'power':
193        UnifiedTLB = Param.Bool(True, "Is this a Unified TLB?")
194        dtb = Param.PowerTLB(PowerTLB(), "Data TLB")
195        itb = Param.PowerTLB(PowerTLB(), "Instruction TLB")
196        interrupts = VectorParam.PowerInterrupts(
197                [], "Interrupt Controller")
198        isa = VectorParam.PowerISA([ isa_class() ], "ISA instance")
199    elif buildEnv['TARGET_ISA'] == 'riscv':
200        dtb = Param.RiscvTLB(RiscvTLB(), "Data TLB")
201        itb = Param.RiscvTLB(RiscvTLB(), "Instruction TLB")
202        interrupts = VectorParam.RiscvInterrupts(
203                [], "Interrupt Controller")
204        isa = VectorParam.RiscvISA([ isa_class() ], "ISA instance")
205    else:
206        print "Don't know what TLB to use for ISA %s" % \
207            buildEnv['TARGET_ISA']
208        sys.exit(1)
209
210    max_insts_all_threads = Param.Counter(0,
211        "terminate when all threads have reached this inst count")
212    max_insts_any_thread = Param.Counter(0,
213        "terminate when any thread reaches this inst count")
214    simpoint_start_insts = VectorParam.Counter([],
215        "starting instruction counts of simpoints")
216    max_loads_all_threads = Param.Counter(0,
217        "terminate when all threads have reached this load count")
218    max_loads_any_thread = Param.Counter(0,
219        "terminate when any thread reaches this load count")
220    progress_interval = Param.Frequency('0Hz',
221        "frequency to print out the progress message")
222
223    switched_out = Param.Bool(False,
224        "Leave the CPU switched out after startup (used when switching " \
225        "between CPU models)")
226
227    tracer = Param.InstTracer(default_tracer, "Instruction tracer")
228
229    icache_port = MasterPort("Instruction Port")
230    dcache_port = MasterPort("Data Port")
231    _cached_ports = ['icache_port', 'dcache_port']
232
233    if buildEnv['TARGET_ISA'] in ['x86', 'arm']:
234        _cached_ports += ["itb.walker.port", "dtb.walker.port"]
235
236    _uncached_slave_ports = []
237    _uncached_master_ports = []
238    if buildEnv['TARGET_ISA'] == 'x86':
239        _uncached_slave_ports += ["interrupts[0].pio",
240                                  "interrupts[0].int_slave"]
241        _uncached_master_ports += ["interrupts[0].int_master"]
242
243    def createInterruptController(self):
244        if buildEnv['TARGET_ISA'] == 'sparc':
245            self.interrupts = [SparcInterrupts() for i in xrange(self.numThreads)]
246        elif buildEnv['TARGET_ISA'] == 'alpha':
247            self.interrupts = [AlphaInterrupts() for i in xrange(self.numThreads)]
248        elif buildEnv['TARGET_ISA'] == 'x86':
249            self.apic_clk_domain = DerivedClockDomain(clk_domain =
250                                                      Parent.clk_domain,
251                                                      clk_divider = 16)
252            self.interrupts = [X86LocalApic(clk_domain = self.apic_clk_domain,
253                                           pio_addr=0x2000000000000000)
254                               for i in xrange(self.numThreads)]
255            _localApic = self.interrupts
256        elif buildEnv['TARGET_ISA'] == 'mips':
257            self.interrupts = [MipsInterrupts() for i in xrange(self.numThreads)]
258        elif buildEnv['TARGET_ISA'] == 'arm':
259            self.interrupts = [ArmInterrupts() for i in xrange(self.numThreads)]
260        elif buildEnv['TARGET_ISA'] == 'power':
261            self.interrupts = [PowerInterrupts() for i in xrange(self.numThreads)]
262        elif buildEnv['TARGET_ISA'] == 'riscv':
263            self.interrupts = \
264                [RiscvInterrupts() for i in xrange(self.numThreads)]
265        else:
266            print "Don't know what Interrupt Controller to use for ISA %s" % \
267                buildEnv['TARGET_ISA']
268            sys.exit(1)
269
270    def connectCachedPorts(self, bus):
271        for p in self._cached_ports:
272            exec('self.%s = bus.slave' % p)
273
274    def connectUncachedPorts(self, bus):
275        for p in self._uncached_slave_ports:
276            exec('self.%s = bus.master' % p)
277        for p in self._uncached_master_ports:
278            exec('self.%s = bus.slave' % p)
279
280    def connectAllPorts(self, cached_bus, uncached_bus = None):
281        self.connectCachedPorts(cached_bus)
282        if not uncached_bus:
283            uncached_bus = cached_bus
284        self.connectUncachedPorts(uncached_bus)
285
286    def addPrivateSplitL1Caches(self, ic, dc, iwc = None, dwc = None):
287        self.icache = ic
288        self.dcache = dc
289        self.icache_port = ic.cpu_side
290        self.dcache_port = dc.cpu_side
291        self._cached_ports = ['icache.mem_side', 'dcache.mem_side']
292        if buildEnv['TARGET_ISA'] in ['x86', 'arm']:
293            if iwc and dwc:
294                self.itb_walker_cache = iwc
295                self.dtb_walker_cache = dwc
296                self.itb.walker.port = iwc.cpu_side
297                self.dtb.walker.port = dwc.cpu_side
298                self._cached_ports += ["itb_walker_cache.mem_side", \
299                                       "dtb_walker_cache.mem_side"]
300            else:
301                self._cached_ports += ["itb.walker.port", "dtb.walker.port"]
302
303            # Checker doesn't need its own tlb caches because it does
304            # functional accesses only
305            if self.checker != NULL:
306                self._cached_ports += ["checker.itb.walker.port", \
307                                       "checker.dtb.walker.port"]
308
309    def addTwoLevelCacheHierarchy(self, ic, dc, l2c, iwc = None, dwc = None):
310        self.addPrivateSplitL1Caches(ic, dc, iwc, dwc)
311        self.toL2Bus = L2XBar()
312        self.connectCachedPorts(self.toL2Bus)
313        self.l2cache = l2c
314        self.toL2Bus.master = self.l2cache.cpu_side
315        self._cached_ports = ['l2cache.mem_side']
316
317    def createThreads(self):
318        self.isa = [ isa_class() for i in xrange(self.numThreads) ]
319        if self.checker != NULL:
320            self.checker.createThreads()
321
322    def addCheckerCpu(self):
323        pass
324