utility.cc revision 5234
1/*
2 * Copyright (c) 2007 The Hewlett-Packard Development Company
3 * All rights reserved.
4 *
5 * Redistribution and use of this software in source and binary forms,
6 * with or without modification, are permitted provided that the
7 * following conditions are met:
8 *
9 * The software must be used only for Non-Commercial Use which means any
10 * use which is NOT directed to receiving any direct monetary
11 * compensation for, or commercial advantage from such use.  Illustrative
12 * examples of non-commercial use are academic research, personal study,
13 * teaching, education and corporate research & development.
14 * Illustrative examples of commercial use are distributing products for
15 * commercial advantage and providing services using the software for
16 * commercial advantage.
17 *
18 * If you wish to use this software or functionality therein that may be
19 * covered by patents for commercial use, please contact:
20 *     Director of Intellectual Property Licensing
21 *     Office of Strategy and Technology
22 *     Hewlett-Packard Company
23 *     1501 Page Mill Road
24 *     Palo Alto, California  94304
25 *
26 * Redistributions of source code must retain the above copyright notice,
27 * this list of conditions and the following disclaimer.  Redistributions
28 * in binary form must reproduce the above copyright notice, this list of
29 * conditions and the following disclaimer in the documentation and/or
30 * other materials provided with the distribution.  Neither the name of
31 * the COPYRIGHT HOLDER(s), HEWLETT-PACKARD COMPANY, nor the names of its
32 * contributors may be used to endorse or promote products derived from
33 * this software without specific prior written permission.  No right of
34 * sublicense is granted herewith.  Derivatives of the software and
35 * output created using the software may be prepared, but only for
36 * Non-Commercial Uses.  Derivatives of the software may be shared with
37 * others provided: (i) the others agree to abide by the list of
38 * conditions herein which includes the Non-Commercial Use restrictions;
39 * and (ii) such Derivatives of the software include the above copyright
40 * notice to acknowledge the contribution from this software where
41 * applicable, this list of conditions and the disclaimer below.
42 *
43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
54 *
55 * Authors: Gabe Black
56 */
57
58#include "arch/x86/intregs.hh"
59#include "arch/x86/miscregs.hh"
60#include "arch/x86/segmentregs.hh"
61#include "arch/x86/utility.hh"
62#include "arch/x86/x86_traits.hh"
63#include "sim/system.hh"
64
65namespace X86ISA {
66
67uint64_t getArgument(ThreadContext *tc, int number, bool fp) {
68#if FULL_SYSTEM
69    panic("getArgument() not implemented for x86!\n");
70#else
71    panic("getArgument() only implemented for FULL_SYSTEM\n");
72    M5_DUMMY_RETURN
73#endif
74}
75
76# if FULL_SYSTEM
77void initCPU(ThreadContext *tc, int cpuId)
78{
79    // The otherwise unmodified integer registers should be set to 0.
80    for (int index = 0; index < NUM_INTREGS; index++) {
81        tc->setIntReg(index, 0);
82    }
83
84    // These next two loops zero internal microcode and implicit registers.
85    // They aren't specified by the ISA but are used internally by M5's
86    // implementation.
87    for (int index = 0; index < NumMicroIntRegs; index++) {
88        tc->setIntReg(INTREG_MICRO(index), 0);
89    }
90
91    for (int index = 0; index < NumImplicitIntRegs; index++) {
92        tc->setIntReg(INTREG_IMPLICIT(index), 0);
93    }
94
95    // Set integer register EAX to 0 to indicate that the optional BIST
96    // passed. No BIST actually runs, but software may still check this
97    // register for errors.
98    tc->setIntReg(INTREG_RAX, 0);
99
100    //The following values are dictated by the architecture for after a RESET#
101    tc->setMiscReg(MISCREG_CR0, 0x0000000060000010);
102    tc->setMiscReg(MISCREG_CR2, 0);
103    tc->setMiscReg(MISCREG_CR3, 0);
104    tc->setMiscReg(MISCREG_CR4, 0);
105    tc->setMiscReg(MISCREG_CR8, 0);
106
107    tc->setMiscReg(MISCREG_RFLAGS, 0x0000000000000002);
108
109    tc->setMiscReg(MISCREG_EFER, 0);
110
111    SegAttr dataAttr = 0;
112    dataAttr.writable = 1;
113    dataAttr.readable = 1;
114    dataAttr.expandDown = 0;
115    dataAttr.dpl = 0;
116    dataAttr.defaultSize = 0;
117
118    for (int seg = 0; seg != NUM_SEGMENTREGS; seg++) {
119        tc->setMiscReg(MISCREG_SEG_SEL(seg), 0);
120        tc->setMiscReg(MISCREG_SEG_BASE(seg), 0);
121        tc->setMiscReg(MISCREG_SEG_LIMIT(seg), 0xffff);
122        tc->setMiscReg(MISCREG_SEG_ATTR(seg), dataAttr);
123    }
124
125    SegAttr codeAttr = 0;
126    codeAttr.writable = 0;
127    codeAttr.readable = 1;
128    codeAttr.expandDown = 0;
129    codeAttr.dpl = 0;
130    codeAttr.defaultSize = 0;
131
132    tc->setMiscReg(MISCREG_CS, 0xf000);
133    tc->setMiscReg(MISCREG_CS_BASE, 0x00000000ffff0000);
134    // This has the base value pre-added.
135    tc->setMiscReg(MISCREG_CS_LIMIT, 0xffffffff);
136    tc->setMiscReg(MISCREG_CS_ATTR, codeAttr);
137
138    tc->setPC(0x000000000000fff0 +
139            tc->readMiscReg(MISCREG_CS_BASE));
140    tc->setNextPC(tc->readPC() + sizeof(MachInst));
141
142    tc->setMiscReg(MISCREG_GDTR_BASE, 0);
143    tc->setMiscReg(MISCREG_GDTR_LIMIT, 0xffff);
144
145    tc->setMiscReg(MISCREG_IDTR_BASE, 0);
146    tc->setMiscReg(MISCREG_IDTR_LIMIT, 0xffff);
147
148    tc->setMiscReg(MISCREG_LDTR, 0);
149    tc->setMiscReg(MISCREG_LDTR_BASE, 0);
150    tc->setMiscReg(MISCREG_LDTR_LIMIT, 0xffff);
151    tc->setMiscReg(MISCREG_LDTR_ATTR, 0);
152
153    tc->setMiscReg(MISCREG_TR, 0);
154    tc->setMiscReg(MISCREG_TR_BASE, 0);
155    tc->setMiscReg(MISCREG_TR_LIMIT, 0xffff);
156    tc->setMiscReg(MISCREG_TR_ATTR, 0);
157
158    // This value should be the family/model/stepping of the processor.
159    // (page 418). It should be consistent with the value from CPUID, but the
160    // actual value probably doesn't matter much.
161    tc->setIntReg(INTREG_RDX, 0);
162
163    // TODO initialize x87, 64 bit, and 128 bit media state
164
165    tc->setMiscReg(MISCREG_MTRRCAP, 0x0508);
166    for (int i = 0; i < 8; i++) {
167        tc->setMiscReg(MISCREG_MTRR_PHYS_BASE(i), 0);
168        tc->setMiscReg(MISCREG_MTRR_PHYS_MASK(i), 0);
169    }
170    tc->setMiscReg(MISCREG_MTRR_FIX_64K_00000, 0);
171    tc->setMiscReg(MISCREG_MTRR_FIX_16K_80000, 0);
172    tc->setMiscReg(MISCREG_MTRR_FIX_16K_A0000, 0);
173    tc->setMiscReg(MISCREG_MTRR_FIX_4K_C0000, 0);
174    tc->setMiscReg(MISCREG_MTRR_FIX_4K_C8000, 0);
175    tc->setMiscReg(MISCREG_MTRR_FIX_4K_D0000, 0);
176    tc->setMiscReg(MISCREG_MTRR_FIX_4K_D8000, 0);
177    tc->setMiscReg(MISCREG_MTRR_FIX_4K_E0000, 0);
178    tc->setMiscReg(MISCREG_MTRR_FIX_4K_E8000, 0);
179    tc->setMiscReg(MISCREG_MTRR_FIX_4K_F0000, 0);
180    tc->setMiscReg(MISCREG_MTRR_FIX_4K_F8000, 0);
181
182    tc->setMiscReg(MISCREG_DEF_TYPE, 0);
183
184    tc->setMiscReg(MISCREG_MCG_CAP, 0x104);
185    tc->setMiscReg(MISCREG_MCG_STATUS, 0);
186    tc->setMiscReg(MISCREG_MCG_CTL, 0);
187
188    for (int i = 0; i < 5; i++) {
189        tc->setMiscReg(MISCREG_MC_CTL(i), 0);
190        tc->setMiscReg(MISCREG_MC_STATUS(i), 0);
191        tc->setMiscReg(MISCREG_MC_ADDR(i), 0);
192        tc->setMiscReg(MISCREG_MC_MISC(i), 0);
193    }
194
195    tc->setMiscReg(MISCREG_DR0, 0);
196    tc->setMiscReg(MISCREG_DR1, 0);
197    tc->setMiscReg(MISCREG_DR2, 0);
198    tc->setMiscReg(MISCREG_DR3, 0);
199
200    tc->setMiscReg(MISCREG_DR6, 0x00000000ffff0ff0);
201    tc->setMiscReg(MISCREG_DR7, 0x0000000000000400);
202
203    tc->setMiscReg(MISCREG_TSC, 0);
204    tc->setMiscReg(MISCREG_TSC_AUX, 0);
205
206    for (int i = 0; i < 4; i++) {
207        tc->setMiscReg(MISCREG_PERF_EVT_SEL(i), 0);
208        tc->setMiscReg(MISCREG_PERF_EVT_CTR(i), 0);
209    }
210
211    tc->setMiscReg(MISCREG_STAR, 0);
212    tc->setMiscReg(MISCREG_LSTAR, 0);
213    tc->setMiscReg(MISCREG_CSTAR, 0);
214
215    tc->setMiscReg(MISCREG_SF_MASK, 0);
216
217    tc->setMiscReg(MISCREG_KERNEL_GS_BASE, 0);
218
219    tc->setMiscReg(MISCREG_SYSENTER_CS, 0);
220    tc->setMiscReg(MISCREG_SYSENTER_ESP, 0);
221    tc->setMiscReg(MISCREG_SYSENTER_EIP, 0);
222
223    tc->setMiscReg(MISCREG_PAT, 0x0007040600070406);
224
225    tc->setMiscReg(MISCREG_SYSCFG, 0x20601);
226
227    tc->setMiscReg(MISCREG_IORR_BASE0, 0);
228    tc->setMiscReg(MISCREG_IORR_BASE1, 0);
229
230    tc->setMiscReg(MISCREG_IORR_MASK0, 0);
231    tc->setMiscReg(MISCREG_IORR_MASK1, 0);
232
233    tc->setMiscReg(MISCREG_TOP_MEM, 0x4000000);
234    tc->setMiscReg(MISCREG_TOP_MEM2, 0x0);
235
236    tc->setMiscReg(MISCREG_DEBUG_CTL_MSR, 0);
237    tc->setMiscReg(MISCREG_LAST_BRANCH_FROM_IP, 0);
238    tc->setMiscReg(MISCREG_LAST_BRANCH_TO_IP, 0);
239    tc->setMiscReg(MISCREG_LAST_EXCEPTION_FROM_IP, 0);
240    tc->setMiscReg(MISCREG_LAST_EXCEPTION_TO_IP, 0);
241
242    // Invalidate the caches (this should already be done for us)
243
244    // TODO Turn on the APIC. This should be handled elsewhere but it isn't
245    // currently being handled at all.
246
247    // TODO Set the SMRAM base address (SMBASE) to 0x00030000
248
249    tc->setMiscReg(MISCREG_VM_CR, 0);
250    tc->setMiscReg(MISCREG_IGNNE, 0);
251    tc->setMiscReg(MISCREG_SMM_CTL, 0);
252    tc->setMiscReg(MISCREG_VM_HSAVE_PA, 0);
253}
254
255#endif
256
257#if FULL_SYSTEM
258void startupCPU(ThreadContext *tc, int cpuId)
259{
260    if (cpuId == 0) {
261        // This is the boot strap processor (BSP). Initialize it to look like
262        // the boot loader has just turned control over to the 64 bit OS. We
263        // won't actually set up real mode or legacy protected mode descriptor
264        // tables because we aren't executing any code that would require
265        // them. We do, however toggle the control bits in the correct order
266        // while allowing consistency checks and the underlying mechansims
267        // just to be safe.
268
269        const int NumPDTs = 4;
270
271        const Addr PageMapLevel4 = 0x70000;
272        const Addr PageDirPtrTable = 0x71000;
273        const Addr PageDirTable[NumPDTs] =
274            {0x72000, 0x73000, 0x74000, 0x75000};
275        const Addr GDTBase = 0x76000;
276
277        const int PML4Bits = 9;
278        const int PDPTBits = 9;
279        const int PDTBits = 9;
280
281        // Get a port to write the page tables and descriptor tables.
282        FunctionalPort * physPort = tc->getPhysPort();
283
284        /*
285         * Set up the gdt.
286         */
287        // Place holder at selector 0
288        uint64_t nullDescriptor = 0;
289        physPort->writeBlob(GDTBase, (uint8_t *)(&nullDescriptor), 8);
290
291        //64 bit code segment
292        SegDescriptor csDesc = 0;
293        csDesc.type.c = 0; // Not conforming
294        csDesc.dpl = 0; // Privelege level 0
295        csDesc.p = 1; // Present
296        csDesc.l = 1; // 64 bit
297        csDesc.d = 0; // default operand size
298        //Because we're dealing with a pointer and I don't think it's
299        //guaranteed that there isn't anything in a nonvirtual class between
300        //it's beginning in memory and it's actual data, we'll use an
301        //intermediary.
302        uint64_t csDescVal = csDesc;
303        physPort->writeBlob(GDTBase, (uint8_t *)(&csDescVal), 8);
304
305        tc->setMiscReg(MISCREG_GDTR_BASE, GDTBase);
306        tc->setMiscReg(MISCREG_GDTR_LIMIT, 0xF);
307
308        /*
309         * Identity map the first 4GB of memory. In order to map this region
310         * of memory in long mode, there needs to be one actual page map level
311         * 4 entry which points to one page directory pointer table which
312         * points to 4 different page directory tables which are full of two
313         * megabyte pages. All of the other entries in valid tables are set
314         * to indicate that they don't pertain to anything valid and will
315         * cause a fault if used.
316         */
317
318        // Put valid values in all of the various table entries which indicate
319        // that those entries don't point to further tables or pages. Then
320        // set the values of those entries which are needed.
321
322        // Page Map Level 4
323
324        // read/write, user, not present
325        uint64_t pml4e = X86ISA::htog(0x6);
326        for (int offset = 0; offset < (1 << PML4Bits) * 8; offset += 8) {
327            physPort->writeBlob(PageMapLevel4 + offset, (uint8_t *)(&pml4e), 8);
328        }
329        // Point to the only PDPT
330        pml4e = X86ISA::htog(0x7 | PageDirPtrTable);
331        physPort->writeBlob(PageMapLevel4, (uint8_t *)(&pml4e), 8);
332
333        // Page Directory Pointer Table
334
335        // read/write, user, not present
336        uint64_t pdpe = X86ISA::htog(0x6);
337        for (int offset = 0; offset < (1 << PDPTBits) * 8; offset += 8) {
338            physPort->writeBlob(PageDirPtrTable + offset,
339                    (uint8_t *)(&pdpe), 8);
340        }
341        // Point to the PDTs
342        for (int table = 0; table < NumPDTs; table++) {
343            pdpe = X86ISA::htog(0x7 | PageDirTable[table]);
344            physPort->writeBlob(PageDirPtrTable + table * 8,
345                    (uint8_t *)(&pdpe), 8);
346        }
347
348        // Page Directory Tables
349
350        Addr base = 0;
351        const Addr pageSize = 2 << 20;
352        for (int table = 0; table < NumPDTs; table++) {
353            for (int offset = 0; offset < (1 << PDTBits) * 8; offset += 8) {
354                // read/write, user, present, 4MB
355                uint64_t pdte = X86ISA::htog(0x87 | base);
356                physPort->writeBlob(PageDirTable[table] + offset,
357                        (uint8_t *)(&pdte), 8);
358                base += pageSize;
359            }
360        }
361
362        /*
363         * Transition from real mode all the way up to Long mode
364         */
365        CR0 cr0 = tc->readMiscRegNoEffect(MISCREG_CR0);
366        //Turn off paging.
367        cr0.pg = 0;
368        tc->setMiscReg(MISCREG_CR0, cr0);
369        //Turn on protected mode.
370        cr0.pe = 1;
371        tc->setMiscReg(MISCREG_CR0, cr0);
372
373        CR4 cr4 = tc->readMiscRegNoEffect(MISCREG_CR4);
374        //Turn on pae.
375        cr4.pae = 1;
376        tc->setMiscReg(MISCREG_CR4, cr4);
377
378        //Point to the page tables.
379        tc->setMiscReg(MISCREG_CR3, PageMapLevel4);
380
381        Efer efer = tc->readMiscRegNoEffect(MISCREG_EFER);
382        //Enable long mode.
383        efer.lme = 1;
384        tc->setMiscReg(MISCREG_EFER, efer);
385
386        //Activate long mode.
387        cr0.pg = 1;
388        tc->setMiscReg(MISCREG_CR0, cr0);
389
390        /*
391         * Far jump into 64 bit mode.
392         */
393        // Set the selector
394        tc->setMiscReg(MISCREG_CS, 1);
395        // Manually set up the segment attributes. In the future when there's
396        // other existing functionality to do this, that could be used
397        // instead.
398        SegAttr csAttr = 0;
399        csAttr.writable = 0;
400        csAttr.readable = 1;
401        csAttr.expandDown = 0;
402        csAttr.dpl = 0;
403        csAttr.defaultSize = 0;
404        csAttr.longMode = 1;
405        tc->setMiscReg(MISCREG_CS_ATTR, csAttr);
406
407        tc->setPC(tc->getSystemPtr()->kernelEntry);
408        tc->setNextPC(tc->readPC());
409
410        // We should now be in long mode. Yay!
411
412        tc->activate(0);
413    } else {
414        // This is an application processor (AP). It should be initialized to
415        // look like only the BIOS POST has run on it and put then put it into
416        // a halted state.
417        tc->suspend();
418    }
419}
420
421#else
422
423void startupCPU(ThreadContext *tc, int cpuId)
424{
425    tc->activate(0);
426}
427
428#endif
429
430} //namespace X86_ISA
431